QUARTZCOM OCO

OCO-M36BS
Through hole OCXO
Sine wave




Features
Applications: PLL, VSAT, frequency synthesizers
High frequency: up to 120 MHz
Short warm-up time: < 2 min.
Low phase noise – floor of < -165 dBc/Hz
Specification
Parameter
OCO-M36BS5
Frequency range
Standard frequencies
Frequency stability
vs. operating temperature range
vs. supply voltage change
vs. load change
vs. aging after 30 days of operation
Output waveform
Output Load
Supply voltage
Steady-state current consumption @ +25 °C
Warm-up time
Frequency pulling range
Vcontrol (Vc) via external voltage
Reference voltage output (Vref)
Phase noise Phase noise
@ 100 MHz carrier frequency & for Vdc = 12 V
OCO-M36BS12
48.0000 ~ 120.0000 MHz
48.00, 56.00, 60.00, 80.00 & 100.00 MHz
 ±1.0 x 10-7
over -40 ~ +70 °C
-8
 ±7.5 x 10
over -20 ~ +70 °C
 ±5.0 x 10-8
over -10 ~ +60 °C
 ±1 x 10-7
±5 %
-8
 ±5 x 10
±5 %
 ±3 x 10-7
1st year
Sine wave > 300 mV (rms)
Sine wave > 400 mV (rms)
50 Ω
±5 %
+5.0 V 5 %
+12 V 5 %
< 300 mA
< 150 mA
< 2 min
< 1 x 10-7 @ +25 °C
> ±3 x 10-6
positive slope
0 ~ +4 V
0 ~ +8 V
+4.0 V
+8.0 V
< -98 dBc/Hz @
10 Hz
< -128 dBc/Hz @
100 Hz
< -150 dBc/Hz @
1 kHz
< -165 dBc/Hz @
10 kHz
Harmonics
< -30 dBc
Operating temperature range
Storage temperature range
-10 ~ +60 °C,
Case height
-20 ~ +70 °C, or -40 ~ +70 °C
-55 ~ +85 °C
16.0 mm
Environmental test
vibration
shock
acceleration: 5 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis
100 g, half-sine, 3 ms
(3 shocks each, 6 directions)
Pin function
#1
#2
#3
#4
#5
Vc
Vref
Vdc
RF output
GND
Circuit diagram
CBP = 0.01 mF
Zout = 50 Ω
2002/95/EC RoHS compliant
QuartzCom AG
[email protected]
www.quartzcom.com
QuartzCom Asia
[email protected]
QuartzCom USA
[email protected]
12 May. 10