OTS-1HD2DTR Optiva Standard, ™ 1 HD-SDI 270-1485 Mbps w/Loopback and 2 Duplex RS-232/422/485 Data HD-SDI Video and Audio Transmission The OTS-1HD2D provides for the digital transmission of 1 Channel of HD-SDI Video with Loopback and 2 Channels of Duplex Serial Data, at absolute broadcast quality. Video System Design Audio Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (DTCR Series). The Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ A L E R T S T A T U S ST, LC, SC or FC ST, LC, SC or FC HD-SDI Video In HD-SDI Video Out HD Video Loopback Out A L E R T S T A T U S Serial Data In HD Video Loopback Out Serial Data Out Optiva™ Optiva™ VAD Transmission VAD Transmission OTS-1HDT2DTR OTS-1HDR2DTR Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Features • Uncompressed HD-SDI Video and Serial Data over one fiber • TDM - Single fiber, dual wavelength • True DC restoration Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 1716 Mbps. • Flat frequency response • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications Versions Available* Wavelength (nm) & Fiber Transmit/Receive** 1310/1550 Multimode OTS-1HDT2DTR-B2/B3M-XX-IC 1310/1550 Singlemode OTS-1HDT2DTR-B2/B3-XX-IC 1310/1550 Singlemode (D) OTS-1HDT2DTR-B2/B3D-XX-IC 1270-1610 SM (CWDM) OTS-1HDT2DTR-L4/L4-XX-IC Non-Optical Version OTS-1HDT2DTR-NOC-IC Receive/Transmit** OTS-1HDR2DTR-B3M/B2-XX-IC OTS-1HDR2DTR-B3/B2-XX-IC OTS-1HDR2DTR-B3D/B2-XX-IC OTS-1HDR2DTR-L4/L4-XX-IC OTS-1HDR2DTR-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 14 21 Varies 1.5 20 40 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. NOTE: The systems in this category offer transmission of certain signals in set configurations. If your application involves multi-signal transmission and/or would benefit from system upgradeability, please visit the Optiva™ Platform section on SDI & HD-SDI page 14. To configure an Optiva™ system to your precise needs, please register for the ‘Product Configurator’ at www.opticomm.com Video Standard Pathological Test Code Nominal Bit Rate Bit error rate Connector Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Contact Closure Data Rate General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™ Configurable SMPTE 292M & 259M RP-178 1.485 Gbps; 270 Mbps 10-14 BNC (IEC 60169-8; Gold Plated) Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data Micro DB25 RGB/VGA/DVI Audio/FSK/Intercom DC to 1 Mbps Data (Ethernet/Serial/USB) DC to 1 Mbps CATV/RF & L-Band DC to 1 Mbps Optical Switching, Routing & Redundancy DC to 1 Mbps Passive Multiplexing Solutions Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1A Max per Insert Card Less than 1ms Enclosures, Racks & Frames 11 oz Power Supplies & Accessories LED Status Indication Compatible with OptivaView™ SNMP Management Suite Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration HD-SDI HD-SDI OTS-1HDT2DTR Local Loopback OTS-1HDR2DTR Second Output