OTS-1V2ATR1DTR1ETR Optiva™ Standard, 1 Composite Video, 2 Duplex Analog Audio,1 Duplex RS-232/422/485 and 1 Duplex 10/100 Mbps Ethernet Composite Video, Audio, Serial Data and Ethernet Transmission Video The OTS-1V2ATR1DTR1ETR provides for the digital transmission of 1 Channel of Composite Video, 2 Channels of Duplex Analog Audio, 1 Channel of Duplex Serial Data and 1 Channel of Duplex 10/100 Ethernet. System Design Audio Data Ethernet All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S Ethernet In/Out Ethernet Out/In 2 Analog Audio In/Out 2 Analog Audio Out/In Serial Data In/Out Composite Video In Serial Data In/Out A L E R T S T A T U S Composite Video Out ST, LC, SC or FC ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1VT2ATR1DTR1ETR Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. OTS-1VR2ART1DRT1ERT Features • Composite Video, Analog Audio, Serial Data and Ethernet over one fiber • 10-Bit Digital Transmission • TDM - Single fiber, dual wavelength • Complies with SMPTE standards for Video transmission Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications Optiva™ bandwidth requirement The of this system is 542 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-1VT2ATR1DTR1ETR-A1/A3M-XX-IC OTS-1VT2ATR1DTR1ETR-A2/A3-XX-IC OTS-1VT2ATR1DTR1ETR-A2/A3D-XX-IC OTS-1VT2ATR1DTR1ETR-A2/A3H-XX-IC OTS-1VT2ATR1DTR1ETR-L4/L4-XX-IC OTS-1VR2ART1DRT1ERT-A3M/A1-XX-IC OTS-1VR2ART1DRT1ERT-A3/A2-XX-IC OTS-1VR2ART1DRT1ERT-A3D/A2-XX-IC OTS-1VR2ART1DRT1ERT-A3H/A2-XX-IC OTS-1VR2ART1DRT1ERT-L4/L4-XX-IC Non-Optical Version OTS-1VT2ATR1DTR1ETR-NOC-IC OTS-1VR2ART1DRT1RT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot IC (1-slot) N/A N/A N/A IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Compatibility Signal to Noise Ratio Connector Analog Audio Level Bandwidth Signal to Noise Ratio Total Harmonic Distortion Signal Coding Connector Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Contact Closure Data Rate Ethernet Standard Data Rate Connector SMPTE 170M; RS-250C 10-Bit Processing; 10-Bit Transmission 1.0 Volt p-p 5.5 MHz < 1% < 0.7° NTSC, PAL > 67 dB BNC (IEC 60169-8) 6 dBm In/Out 20 Hz to 20 KHz > 80 dB < 0.1% 20-bit Micro DB25 Impedance Options: Input Balanced 600 Ohm Balanced Hi-Z Unbalanced Hi-Z Optiva™™Configurable Multi-Signal Optiva Transmission Platform Platform Communication Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Output Balanced 600 Ohm Balanced Low-Z Unbalanced Low-Z Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Micro DB25 Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy DC to 1 Mbps Passive Multiplexing Multiplexing Passive Solutions Solutions DC to 1 Mbps DC to 1 Mbps Enclosures, Racks Racks Enclosures, & Frames Frames & DC to 1 Mbps Power Supplies Supplies Power and Accessories & Accessories Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Sample Configuration Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 11 oz 1 Amp Max per Insert Card Less than 1ms (Audio <10ms) LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA