VECTRON OX-0600-BAT-108

OX-060
Oven Controlled Crystal Oscillator
OX-060
Features
•
•
•
•
•
Applications
Very High Stability
Low Aging
SC-Cut Crystal Standard
Frequency Range: 4 MHZ to 15 MHZ
Previous Model: C4650, 4884
•
•
•
•
Base Stations
Test Equipment
Synthesizers
Digital Switching
Performance Specifications
Parameter
Min
Typ
Max
Units
Condition
1
Frequency Stabilities
vs. operating temperature range
(referenced to +25°C)
-10
-7
-5
+10
+7
+5
ppb
ppb
ppb
-40… +70°C
-20… +70°C
0… +70°C
Initial Tolerance
vs. supply voltage change
vs. load change
vs. aging / day
vs. aging / 1 year
vs. aging / year (following years)
Warm-up Time
-250
-1.0
-1.0
-0.5
-50
-30
+250
+1.0
+1.0
+0.5
+50
+30
10
ppb
ppb
ppb
ppb
ppb
ppb
minutes
at time of shipment, nominal EFC
Vs ± 5%
Load ± 5%
after 72 hours of operation
after 72 hours of operation
to ± 10ppb of final frequency
(1 hour reading) @ +25°C
Supply Voltage (Vs)
Supply voltage (Standard)
11.4
12.0
12.6
VDC
Supply voltage (Option)
14.25
15.0
15.75
VDC
6.0
1.5
Watts
Watts
Power consumption
during warm-up
steady state @ +25°C
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Specifications
Parameter
Min
Typ
Max
Units
Condition
RF Output
HCMOS
Signal (standard)
Load
15
pF
0.5
Signal Level (Vol)
Signal Level (Voh)
4.5
Duty cycle
40
Signal (Option)
60
V
with 15pF load
V
with 15pF load
%
@ (Voh-Vol)/2
Sinewave
Load
50
Output Power
+5.0
ohm
+7.0
Harmonics
+9.0
dBm
50 ohm load
-30
dBc
50 ohm load
Frequency Tuning (EFC)
Tuning Range
±0.3
±0.6
Linearity
±1.0
ppm
20
%
Positive
Tuning Slope
Control Voltage Range
0.0
2.5
5.0
VDC
Additional Parameters1
Reference Voltage
4.7
5.1
VDC
Phase Noise (@ 10 MHz)
-95
-125
-145
-150
-155
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Weight
53.0
g
3
4.9
Processing & Packing
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
Handling & processing note
Absolute Maximum Ratings
Supply voltage (Vs)
Output Load
28.0
V
50
25
pF
ohm
Operable temperature range
-55
+85
°C
Storage temperature range
-55
+125
°C
with HCMOS signal
with Sinewave signal
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Outline Drawing / Enclosure
Dimensions in mm
Type A
Code
Height “H”
Pin Length “L”
0
25.4
6.40
Pin Connections
1
Ground (Case)
2
Electronic Frequency Control Input(EFC)
3
Reference Voltage Output
4
Supply Voltage Input (Vs)
5
RF Output
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
OX - 060 0 - B A T - 108
0 - 10M0000000
Frequency
Product Family
OX: OCXO
Option
0: No Option
Package
41 x 50 mm
Height
0: A25.4mm
Stability Code
108: ±10ppb
709: ±7ppb
509: ±5ppb
Supply Voltage
A: 15 Vdc
B: 12 Vdc
RF Output Code
A: HCMOS
E: Sinewave
Temperature Range
D: -40°C to +70°C
J: -20°C to +70°C
T: 0°C to +70°C
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Europe:
Asia:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 2/23/2009 daf
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com