CHENMKO ENTERPRISE CO.,LTD P4SSMJ GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 200 VOLTS 400 WATTS PEAK POWER 1.0 WATT STEADY STATE SERIES FEATURES * * * * * * Plastic package 400W surge capability at 1ms Glass passivated chip junction in SMA Package Excellent clamping capability Low Zener lmpedance Fast response time: typically less than 1.0ps from 0 volts to BV min. * Typical IR less than 1 uA above 10V * High temperature soldering guaranteed : 260oC/10 seconds at terminals SMA 0.110(2.80) 0.065(1.65) 0.094(2.40) 0.049(1.25) (1) 0.181(4.60) (2) 0.165(4.20) MECHANICAL DATA 0.012(0.310) 0.006(0.150) Case: JEDEC SMA molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.002 ounce, 0.064 gram 0.090(2.30) 0.075(1.90) 0.060(1.52) 0.008 (0.203)(max) 0.030(0.76) 0.212(5.40) 0.189(4.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SMA DEVICES FOR BIDIRECTIONAL APPLICATIONS For Bidirectional use C or CA Suffix for types P4SSMJ6.8A thru types P4SSMJ200A Electrical characteristics apply in both directions. MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL VALUE UNITS Peak Power Dissipation at TA = 25oC, Tp = 1ms ( Note1 ) PPK Minimum 400 Watts Steady State Power Dissipation at TL = 75oC PD 1.0 Watts IFSM 40 Amps TJ, TSTG -65 to +175 Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load ( Note 2 ) Operating and Storage Temperature Range NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25oC per Fig. 2. 2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. 3. PC Board Mounted on 0.2 X 0.2" ( 5 X 5mm ) copper pad area o C 2003-01 Breakdown Voltage PRODUCT NO. VBR Volts ( NOTE 1 ) @ IT ( mA ) Working Peak Reverse Voltage Maximum Reverse Leakage at Vrwm Vrwm ( V ) Ir ( uA ) Maximum Reverse Current ( NOTE 2 ) Irsm ( A ) Maximum Reverse Voltage at Irsm ( clamping ) Maximum Temperature Coefficient of Vbr Vrsm ( V ) ( %C ) MIN. NOM. MAX. P4SSMJ6.8APT 6.45 6.8 7.14 10 5.80 1000 40 10.5 0.057 P4SSMJ7.5APT 7.13 7.5 7.88 10 6.40 500 37 11.3 0.061 P4SSMJ8.2APT 7.79 8.2 8.61 10 7.02 200 35 12.1 0.065 P4SSMJ9.1APT 8.65 9.1 9.55 1.0 7.78 50 31 13.4 0.068 P4SSMJ10APT 9.5 10 10.5 1.0 8.55 10 29 14.5 0.073 P4SSMJ11APT 10.5 11 11.6 1.0 9.40 5.0 27 15.6 0.075 P4SSMJ12APT 11.4 12 12.6 1.0 10.2 5.0 25 16.7 0.078 P4SSMJ13APT 12.4 13 13.7 1.0 11.1 5.0 23 18.2 0.081 P4SSMJ15APT 14.3 15 15.8 1.0 12.8 5.0 20 21.2 0.084 P4SSMJ16APT 15.2 16 16.8 1.0 13.6 5.0 19 22.5 0.086 P4SSMJ18APT 17.1 18 18.9 1.0 15.3 5.0 17 25.2 0.088 P4SSMJ20APT 19.0 20 21.0 1.0 17.1 5.0 15 27.7 0.090 P4SSMJ22APT 20.9 22 23.1 1.0 18.8 5.0 14 30.6 0.092 P4SSMJ24APT 22.8 24 25.2 1.0 20.5 5.0 13 33.2 0.094 P4SSMJ27APT 25.7 27 28.4 1.0 23.1 5.0 11.2 37.5 0.096 P4SSMJ30APT 28.5 30 31.5 1.0 25.6 5.0 10 41.4 0.097 P4SSMJ33APT 31.4 33 34.7 1.0 28.2 5.0 9 45.7 0.098 P4SSMJ36APT 34.2 36 37.8 1.0 30.8 5.0 8.4 49.9 0.099 P4SSMJ39APT 37.1 39 41.0 1.0 33.3 5.0 7.8 53.9 0.100 P4SSMJ43APT 40.9 43 45.2 1.0 36.8 5.0 7.1 59.3 0.101 P4SSMJ47APT 44.7 47 49.4 1.0 40.2 5.0 5.0 64.8 0.101 P4SSMJ51APT 48.5 51 53.6 1.0 43.6 5.0 6.0 70.1 0.102 P4SSMJ56APT 53.2 56 58.8 1.0 47.8 5.0 5.5 77.0 0.103 P4SSMJ62APT 58.9 62 65.1 1.0 53.0 5.0 5.0 85.0 0.104 P4SSMJ68APT 64.6 68 71.4 1.0 58.0 5.0 4.6 92.0 0.104 P4SSMJ75APT 71.3 75 78.8 1.0 64.1 5.0 4.1 103 0.105 P4SSMJ82APT 77.9 82 86.1 1.0 70.1 5.0 3.7 113 0.105 P4SSMJ91APT 86.5 91 95.5 1.0 77.8 5.0 3.4 125 0.106 P4SSMJ100APT 95.0 100 105 1.0 85.5 5.0 3.1 137 0.106 P4SSMJ110APT 105 110 116 1.0 94.0 5.0 2.8 152 0.107 P4SSMJ120APT 114 120 126 1.0 102 5.0 2.5 165 0.107 P4SSMJ130APT 124 130 137 1.0 111 5.0 2.3 179 0.107 P4SSMJ150APT 143 150 158 1.0 128 5.0 2.0 207 0.108 P4SSMJ160APT 152 160 168 1.0 136 5.0 1.9 219 0.108 P4SSMJ170APT 162 170 179 1.0 145 5.0 1.8 234 0.108 P4SSMJ180APT 171 180 189 1.0 154 5.0 1.7 246 0.108 P4SSMJ200APT 190 200 210 1.0 171 5.0 1.53 274 0.108 RATING CHARACTERISTIC CURVES ( P4SSMJ6.8APT ~ P4SSMJ200APT ) FIG. 1 - PEAK PULSE POWER RATING CURVE P PPM , PEAK PULSE POWER, KW 100 Non-Repetitive Pulse Waveform Shown in Fig.3 T A = 25 OC 10 1.0 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS 10mS PEAK PULSE POWER (P PP ) OR CURRENT (I PP ) DERATING IN PERCENTAGE,% FIG. 2 - PULSE DERATING CURVE 100 75 50 25 0 0 150 100000 100 I PPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. 50 0 td 0 1.0 75 100 Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of I PPM C J , CAPACITANCE, pF I PPM , PEAK PULSE CURRENT,% Peak Value I PPM 50 2.0 t, TIME,mS 125 150 175 200 FIG. 4 - TYPICAL JUNCTION CAPACITANCE UNI-DIRECTIONAL FIG. 3 - PULSE WAVEFORM tr = 10usec. 25 T A , AMBIENT TEMPERATURE,( OC ) T P , PULSE WIDTH, Sec 3.0 4.0 f = 1.0 MHz Vsig = 50mVp-p T J = 25 OC 10000 Measured at Zero Bias 1000 10 Measured at Devices Stand off Voltage,V WM 1.0 10 100 V( BR ), BREAKDOWN VOLTACE, VOLTS 200 RATING CHARACTERISTIC CURVES ( P4SSMJ6.8A ~ P4SSMJ200A ) FIG. 5 - STEADY STATE POWER DERATING CURVE FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL 1.00 50 8.3ms Single Half Sine-Wave (JEDED Method) T J = T J max. I FSM , PEAK FORWARD SURGE CURRENT AMPERES 0.75 0.50 0.25 0 0 25 50 75 100 125 150 175 200 40 30 20 10 0 1 10 T L , LEAD TEMPERATURE ( OC ) NUMBER OF CYCLES AT 60 Hz FIG. 7 -TYPICAL REVERSE LEAKAGE CHARACTERISTICS 100 I R , INSTANTANEOUS REVERSE LEAKAGE CHRRENT, MICROAMPERES P M ( AV ), STEADY STATE POWER DISSIATION, WATTS 60Hz Resistive or Inductive Load 10 Measured at Devices Stand-off Voltage, V WM 1 T J = 25 OC 0.1 0.01 0 100 200 300 400 V( BR ) BREAKDOWN VOLTAGE, VOLTS 600 100