TVS RECTRON P6FMBJ SEMICONDUCTOR TECHNICAL SPECIFICATION SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 1.0 WATT STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory Glass passivated chip construction 600 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time DO-214AA Ratings at 25 o C ambient temperature unless otherwise specified. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types P6FMBJ6.8 thru P6FMBJ400 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) SYMBOL VALUE UNITS Peak Power Dissipation with a 10/1000uS (Note 1,2 Fig.1) P PPM Minimum 600 Watts Peak Pulse Durrent with a 10/1000uS waveform ( Note 1, Fig.3 ) I PPM SEE TABLE 1 Amps P M ( AV ) 5.0 Amps I FSM 100 Amps VF SEE NOTE 4 Volts T J , T STG -55 to + 150 RATINGS o Steady State Power Dissipation at TL = 75 C ( Note 2 ) Peak Forward Surge Current, 8.3mS single half sine wave superimposed on rated load (Jedec Method)(Note 3,2) unidirectional only Maximum Instantaneous Forward Voltage at 50A for unidirectional only ( Note 3,4 ) Operating and Storage Temperature Range o NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig.2. 2. Mounted on 0.2 X 0.2” ( 5.0 X 5.0mm ) copper pad to each terminal. 3. Measured on 8.3mS single half Sine-Wave or equivalent wave, duty cycle = 4 pulses per minute maximum. 4. VF = 3.5V on P6FMBJ6.8 thru P6FMB90 devices and VF = 5.0V on P6FMBJ100 thur P6FMBJ400 devices. 0 C 1998-8 Back RECTRON RECTRON RECTRON