2SC5064 TOSHIBA Transistor Silicon NPN Epitaxial Planar Type 2SC5064 VHF~UHF Band Low Noise Amplifier Applications • Low noise figure, high gain. • NF = 1.1dB, |S21e|2 = 12dB (f = 1 GHz) Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 20 V Collector-emitter voltage VCEO 12 V Emitter-base voltage VEBO 3 V Base current IB 15 mA Collector current IC 30 mA Collector power dissipation PC 150 mW Junction temperature Tj 125 °C Tstg −55~125 °C Storage temperature range Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). JEDEC ― JEITA SC-59 TOSHIBA 2-3F1A Weight: 0.012 g (typ.) Microwave Characteristics (Ta = 25°C) Characteristics Transition frequency Insertion gain Noise figure Symbol Test Condition Min Typ. Max Unit GHz VCE = 5 V, IC = 10 mA 5 7 ⎯ 2 VCE = 5 V, IC = 10 mA, f = 500 MHz ⎯ 17 ⎯ 2 VCE = 5 V, IC = 10 mA, f = 1 GHz 8.5 12 ⎯ NF (1) VCE = 5 V, IC = 3 mA, f = 500 MHz ⎯ 1 ⎯ NF (2) VCE = 5 V, IC = 3 mA, f = 1 GHz ⎯ 1.1 2.0 Min Typ. Max Unit fT ⎪S21e⎪ (1) ⎪S21e⎪ (2) dB dB Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Collector cut-off current ICBO VCB = 10 V, IE = 0 ⎯ ⎯ 1 μA Emitter cut-off current IEBO VEB = 1 V, IC = 0 ⎯ ⎯ 1 μA VCE = 5 V, IC = 10 mA 80 ⎯ 240 ⎯ 0.7 ⎯ pF ⎯ 0.45 0.9 pF DC current gain hFE (Note 1) Output capacitance Cob Reverse transfer capacitance Cre VCB = 5 V, IE = 0, f = 1 MHz (Note 2) Note 1: hFE classification O: 80~160, Y: 120~240 Note 2: Cre is measured by 3 terminal method with capacitance bridge. 1 2007-11-01 2SC5064 Marking 2 2007-11-01 2SC5064 3 2007-11-01 2SC5064 S-Parameter ZO = 50 Ω, Ta = 25°C VCE = 5 V, IC = 5 mA Frequency (MHz) S11 Mag. S21 S12 S22 Ang. Mag. Ang. Mag. Ang. Mag. Ang. 200 0.753 −43.7 10.247 140.6 0.040 65.6 0.827 −22.6 400 0.531 −75.1 7.684 117.1 0.060 57.1 0.648 −30.3 600 0.384 −96.4 5.815 103.0 0.074 56.1 0.551 −32.0 800 0.305 −112.6 4.523 93.6 0.086 57.0 0.500 −32.3 1000 0.255 −126.5 3.788 86.3 0.099 58.9 0.472 −32.4 1200 0.224 −138.4 3.244 80.7 0.112 60.2 0.455 −32.2 1400 0.203 −150.1 2.833 75.4 0.127 60.3 0.442 −32.6 1600 0.187 −159.4 2.529 70.6 0.139 60.0 0.434 −33.0 1800 0.174 −166.5 2.283 66.7 0.150 60.3 0.429 −32.6 2000 0.176 −171.2 2.107 63.0 0.164 59.2 0.428 −32.2 VCE = 5 V, IC = 10 mA Frequency S11 S21 S12 S22 (MHz) Mag. Ang. Mag. Ang. Mag. Ang. Mag. Ang. 200 0.591 −58.0 14.955 129.6 0.034 64.3 0.714 −27.5 400 0.367 −90.3 9.581 107.5 0.052 61.9 0.534 −30.8 600 0.260 −110.7 6.781 96.1 0.067 63.9 0.462 −30.1 800 0.209 −126.9 5.207 88.6 0.083 65.2 0.428 −29.2 1000 0.178 −141.8 4.269 82.5 0.100 66.4 0.412 −28.6 1200 0.160 −153.7 3.618 77.7 0.117 66.7 0.403 −28.3 1400 0.150 −166.3 3.152 72.7 0.135 65.4 0.398 −28.8 1600 0.141 −175.2 2.801 68.7 0.149 64.0 0.393 −29.4 1800 0.130 178.2 2.521 65.0 0.163 63.4 0.392 −29.0 2000 0.133 174.0 2.314 61.7 0.179 61.3 0.395 −28.6 4 2007-11-01 2SC5064 5 2007-11-01 2SC5064 6 2007-11-01 2SC5064 RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-11-01