Ordering number:EN4509 NPN Epitaxial Planar Silicon Transistor 2SC5069 Low-Frequency General-Purpose Amplifier, Driver Applications Package Dimensions unit:mm 2038A [2SC5069] 4.5 1.6 1.5 0.4 1.0 2.5 · High current capacity. · Adoption of MBIT process. · High DC current gain. · Low collector-to-emitter saturation voltage. · High VEBO. 0.5 3 1.5 2 4.25max Features 1 0.4 3.0 1 : Base 2 : Collector 3 : Emitter SANYO : PCP (Bottom view) 0.75 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 30 V Collector-to-Emitter Voltage VCEO VEBO 25 V 15 V IC 2 A ICP 4 A Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg 0.4 A 1.5 W 150 ˚C –55 to +150 ˚C Mounted on ceramic board (250mm2× 0.8mm) Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Collector Cutoff Current ICBO Emitter Cutoff Current IEBO VCB=20V, IE=0 VEB=10V, IC=0 DC Current Gain hFE1 hFE2 VCE=5V, IC=500mA VCE=5V, IC=1A fT VCE=10V, IC=50mA VCB=10V, f=1MHz Gain-Bandwidth Product Output Capacitance Cob Ratings min 800 typ 1500 max Unit 100 nA 100 nA 3200 600 260 MHz 27 pF Marking :CU Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 12599HA (KT)/42894MT (KOTO) BX-0115 No.4509–1/4 2SC5069 Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol VCE(sat) VBE(sat) Conditions Ratings min typ max Unit IC=1A, IB=20mA 0.15 0.5 V IC=1A, IB=20mA 0.85 1.2 V Collector-to-Base Breakdown Voltage V(BR)CBO IC=10µA, IE=0 30 V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=1mA, RBE=∞ 25 V Emitter-to-Base Breakdown Voltage V(BR)EBO ton 15 Turn-ON Time Strage Time Fall Time IE=10µA, IC=0 V See specified Test Circuit 0.14 µs tstg See specified Test Circuit 1.35 µs tf See specified Test Circuit 0.1 µs Switching Time Test Circuit No.4509–2/4 2SC5069 No.4509–3/4 2SC5069 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 1999. Specifications and information herein are subject to change without notice. PS No.4509–4/4