Ordering information Unit type PAA50F PAA PAA 1 50 2 F 3 -5 5 Recommended Noise Filter NAC-06-472 R -O 4 High voltage pulse noise type : NAP series Low leakage current type : NAM series 1Series name 2Output wattage 3Universal input 4Output voltage 5Optional C :with Coating G :Low leakage current J :Connector type N :with Cover R :with Remote ON/OFF *The Noise Filter is recommended *to connect with several devices. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PAA50F-3 30 3V 10A PAA50F-5 50 5V 10A PAA50F-12 51.6 12V 4.3A PAA50F-15 52.5 15V 3.5A PAA50F-24 52.8 24V 2.2A PAA50F-48 52.8 48V 1.1A SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 *3 * FREQUENCY[Hz] EFFICIENCY[%] POWER FACTOR ACIN 100V ACIN 200V ACIN 100V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *2 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE ON/OFF *3 INPUT-OUTPUT -RC INPUT-FG *3 OUTPUT-RC-FG *3 OUTPUT-RC OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD PAA50F-3 PAA50F-5 PAA50F-12 PAA50F-15 PAA50F-24 AC85 - 264 1f 0.5typ 0.8typ 0.25typ 0.4typ 50/60 (47 - 63) 67typ 74typ 77typ 78typ 80typ 0.95typ (Io=100%) 15typ (Io=100%) 15typ (Io=100%) 0.75max (60Hz, According to UL, CSA, VDE and DEN-AN) 3 5 12 15 24 10 10 4.3 3.5 2.2 20max 20max 48max 60max 96max 40max 40max 100max 120max 150max 80max 80max 120max 120max 120max 140max 140max 160max 160max 160max 120max 120max 150max 150max 150max 160max 160max 180max 180max 180max 50max 50max 120max 150max 240max 60max 60max 150max 180max 290max 20max 20max 48max 60max 96max 500max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%) 20typ (ACIN 100V, Io=100%) 100typ (ACIN 200V, Io=100%) 2.85 - 3.6 t10% Works over 105% of rating and recovers automatically 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Optional (Refer to Instruction Manual) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature) -10 to +65C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B Complies with IEC61000-3-2 37X85X159mm (without terminal block) (WXHXD) /400g max (without cover) Convection PAA50F-48 80typ 48 1.1 192max 240max 150max 200max 250max 300max 480max 600max 192max max According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Applicable when Remote ON/OFF(optional) is added. Derating is required when operated with case cover. Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ A-48 ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■ PAA50F PAA External view CN3 Connector for Remote ON/OFF (option) CN3 Connector for Remote ON/OFF (option) LED 15max Voltage adjust 159 (12) Name plate Cover name plate 1 2 12 Cover(option) CN2 (24) 1 RC(+) 2 RC(-) Model B2B-XH-A Mating Connector(Terminal) XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 ( 20 Name plate ( 7.5 4 143 2537 3.5 º4 2-º3.5 Barrier strip type 11 127-+0.5 3.5 Connector type Contents 21.5 171 ¶Weight: 400g or less(without cover) ¶Cover is optional +1 ¶Tolerance - Pin No. 85 38.5 M3 I/O Connector Mating Connector Terminal CN1 5289-4A 5199-04 Chain: 5194PBT Loose: 5194PBTL CN2 5277-4A 5196-04 Chain: 5194PBT Loose: 5194PBTL ¶Maximum 5A per pin of CN2 can be applied. (Mfr : Molex) CN3 Option (Mfr : J.S.T.) 100-+0.5 159 Terminal cover (15) 3.5 FG AC(L) NC AC(N) 18.5 CN1 2-M3 Mounting hole (71) (65) (13.5) 7.5 9.5 + FG AC(L) AC(N) - 8.5 + 3-M3 Mounting hole ¶Mounting torque:0.49N.m(5.0kgf.cm)max Performance data ¡RISE TIME & FALL TIME (PAA50F-5 ) ¡EFFICIENCY (PAA50F-5) 84 80 76 EFFICIENCY 72 DC Output ACIN 100V Io=100% AC Input 68 64 60 56 Load factor 100% Load factor 50% 52 0 50ms/DIV 100 140 180 220 INPUT VOLTAGE ¡HARMOINC CURRENT (PAA50F-5) 10 Load factor 100% Input voltage AC 230V A A 100% Load factor Input voltage AC 100V 1 HARMONIC CURRENT 1 HARMONIC CURRENT 300 ¡HARMONIC CURRENT (PAA50F-5) 10 Harmonic current standard class D (at odd number) 0.1 0.01 0.001 0 260 V 10 20 30 Harmonic current standard class D (at odd number) 0.1 0.01 0.001 0 40 HARMONIC ORDER 10 20 Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ Änderungen vorbehalten / subject to change without notice 30 40 HARMONIC ORDER ■ ■ ■ A-49