RoHS Power Chip Inductors Dimensions: Allied Part Number Q Inductance Tolerance Q Test (uh) (%) Freq. Ref (MHz) MHz 0.1V PC1307 Inches (mm) SRF (MHz) Typ RDC (mΩ) Typ Isat (A) Typ Irms (A) Max. PC1307-1R5M-RC 1.5 20 7.96 20 65 5.0 20 9.5 PC1307-2R2M-RC 2.2 20 7.96 22 50 6.0 18 9.0 PC1307-2R7M-RC 2.7 20 7.96 24 40 8.0 16 8.2 PC1307-3R3M-RC 3.3 20 7.96 26 38 8.7 15 7.5 PC1307-4R7M-RC 4.7 20 7.96 25 36 10 13 7.0 PC1307-5R6M-RC 5.6 20 7.96 24 28 15 11 6.5 PC1307-6R8M-RC 6.8 20 7.96 24 26 17 10.5 6.0 PC1307-8R2M-RC 8.2 20 7.96 24 24 19 9.8 5.8 PC1307-100M-RC 10 20 2.52 22 22 21 9.2 5.6 PC1307-120M-RC 12 15 20 2.52 25 20 30 8.0 4.8 PC1307-150M-RC 20 2.52 28 17 34 7.5 4.5 PC1307-180M-RC 18 20 2.52 28 16 36 7.0 4.2 PC1307-220M-RC 22 20 2.52 40 15 47 6.5 3.6 11 60 5.5 3.3 PC1307-270M-RC 27 20 2.52 35 PC1307-330M-RC 33 10,20 2.52 35 10 65 5.0 3.1 PC1307-390M-RC 39 10,20 2.52 28 9.0 75 4.6 2.9 PC1307-470M-RC 47 10,20 2.52 24 7.5 82 4.2 2.7 PC1307-560M-RC 56 10,20 2.52 22 7.2 95 3.8 2.5 PC1307-680M-RC 68 10,20 2.52 24 7.0 120 3.5 2.3 PC1307-820M-RC 82 10,20 2.52 18 6.0 140 3.2 2.1 PC1307-101M-RC 100 10,20 .796 25 5.8 180 3.0 1.9 PC1307-121M-RC 120 10,20 .796 20 5.5 210 2.8 1.8 PC1307-151M-RC 150 10,20 .796 20 4.5 250 2.6 1.6 PC1307-181M-RC 180 10,20 .796 18 4.0 280 2.3 1.5 PC1307-221M-RC 220 10,20 .796 15 3.8 360 2.1 1.3 PC1307-271M-RC 271 10,20 .796 15 3.5 410 1.8 1.2 PC1307-331M-RC 330 10,20 .796 15 3.2 520 1.6 1.2 PC1307-391M-RC 391 10,20 .796 12 2.5 600 1.5 1.0 PC1307-471M-RC 470 10,20 .796 12 2.2 720 1.4 0.9 PC1307-561M-RC 560 10,20 .796 10 2.0 880 1.3 .85 PC1307-681M-RC 680 10,20 .796 10 1.6 1000 1.2 .80 PC1307-821M-RC 820 10,20 .796 10 1.5 1300 1.1 .75 PC1307-102M-RC 1000 10,20 .796 10 1.4 1600 1.0 .65 Features • Unshielded SMD Power Inductor • High Saturation Current • Suitable for large currents • Ideal for DC-DC converter applications Electrical Inductance Range: 1.5µh to 100µh Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: As noted Operating Temp: -40ºC ~ +125ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40ºC whichever is lower. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L): HP4192A LF Impedence Analyzer (RDC): Chen Hwa 502BC (IDC): HP4284A with HP42841A or Chen Hwa 1061 + 301A (SRF): HP4286A Physical Packaging: 300 pieces per 7 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/11/08 www.alliedcomponents.com