PEEL™ 18LV8Z-15 / I-15 CMOS Programmable Electrically Erasable Logic Device Features • Low Voltage, Ultra Low Power Operation - Vcc = 2.7 to 3.6 V - Icc = 5 µA (typical) at standby - Icc = 1.5 mA (typical) at 1 MHz - Meets JEDEC LV Interface Spec (JEDSD8-A) - 5 Volts tolerant inputs and I/O’s • CMOS Electrically Erasable Technology - Superior factory testing - Reprogrammable in plastic package - Reduces retrofit and development costs • Application Versatility - Replaces random logic - Super set of standard PLDs - Pin and JEDEC compatible with 16V8 - Ideal for battery powered systems - Replaces expensive oscillators • Architectural Flexibility - Enhanced architecture fits in more logic - 113 product terms x 36 input AND array - 10 inputs and 8 I/O pins - 12 possible macrocell configurations - Asynchronous clear, Synchronous preset - Independent output enables - Programmable clock; pin 1 or p-term - Programmable clock polarity - 20 Pin DIP/SOIC/TSSOP and PLCC - Schmitt triggers on clock and data inputs • Schmitt Trigger Inputs - Eliminates external Schmitt trigger devices - Ideal for encoder designs General Description The differences between the PEEL18LV8Z and PEEL18CV8 include the addition of programmable clock polarity, p-term clock, and Schmitt trigger input buffers on all inputs, including the clock. Schmitt trigger inputs allow direct input of slow or noisy signals. The PEEL18LV8Z is a Programmable Electrically Erasable Logic (PEEL) SPLD (Simple Programmable Logic Device) that operates over the supply voltage range of 2.7V-3.6V and features ultra-low, automatic "zero" power-down operation. The PEEL18LV8Z is logically and functionally similar to Anachip's 5V PEEL18CV8 and PEEL18CV8Z. The "zero power" (25 µA max. Icc) power-down mode makes the PEEL18LV8Z ideal for a broad range of batterypowered portable equipment applications, from hand-held meters to PCMCIA modems. EE-reprogrammability provides both the convenience of fast reprogramming for product development and quick product personalization in manufacturing, including Engineering Change Orders. I/CLK1 1 20 V CC I 2 19 I/O I/CLK1 I 1 2 20 19 V CC I/O I 3 18 I/O I 3 18 I/O I 4 17 I/O I 4 17 I/O I 5 16 I/O I 6 15 I/O I I 5 6 16 15 I/O I/O I 7 I 7 14 I/O 13 8 13 I/O I I 8 I 9 12 I/O GND 9 10 12 11 I/O I/O I 10 11 I GND 14 I/O DIP Like the PEEL18CV8, the PEEL18LV8Z is a logical superset of the industry standard PAL16V8 SPLD. The PEEL18LV8Z provides additional architectural features that allow more logic to be incorporated into the design. Anachip's JEDEC file translator allows easy conversion of existing 20 pin PLD designs to the PEEL18LV8Z architecture without the need for redesign. The PEEL18LV8Z architecture allows it to replace over twenty standard 20-pin DIP, SOIC, TSSOP and PLCC packages. C LK MU X (Optional) ª I I/O I/O 2 VCC I/O 3 I/CLK1 TSSOP 1 20 19 I 4 18 I/O I 5 17 I/O I 6 16 I/O I 7 15 I/O I 8 14 I/O 9 10 11 12 13 I/CLK1 1 20 I 2 I I 3 4 19 18 I/O 17 I/O I 5 16 I/O I I 6 15 14 I/O I/O I 7 8 13 I/O I 9 12 10 11 I/O I I/O I/O I I GND GND PLCC-J V CC I/O SOIC Figure 2 - Block Diagram Figure 1 - Pin Configuration This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev. 1.0 Dec 16, 2004 1/10 (O p tio n a l) I/ C LK* I* I* I* I* I* I* I* I* * Schm itt Trigger Inputs I* Figure 3 - PEEL18LV8Z Logic Array Diagram Anachip Corp. www.anachip.com.tw Rev. 1.0 Dec 16, 2004 2/10 Function Description The PEEL18LV8Z implements logic functions as sum-ofproducts expressions in a programmable-AND/fixed-OR logic array. Programming the connections of input signals into the array creates user-defined functions. Userconfigurable output structures in the form of I/O macrocells further increase logic flexibility. Architecture Overview The PEEL18LV8Z architecture is illustrated in the block diagram of Figure 14. Ten dedicated inputs and 8 I/Os provide up to 18 inputs and 8 outputs for creation of logic functions. At the core of the device is a programmable electrically erasable AND array that drives a fixed OR array. With this structure, the PEEL18LV8Z can implement up to 8 sum-of-products logic expressions. Associated with each of the 8 OR functions is an I/O macrocell that can be independently programmed to one of 12 different configurations. The programmable macrocells allow each I/O to be used to create sequential or combinatorial logic functions of active-high or active-low polarity, while providing three different feedback paths into the AND array. The PEEL18LV8Z provides 113 product terms to drive the 8 OR functions. These product terms are distributed among the outputs in groups of 8, 10, 12, 14, and 16 to form logical sums (see Figure 15). This distribution allows optimum use of the device resources. The unique twelve-configuration output macrocell provides complete control over the architecture of each output. The ability to configure each output independently lets you to tailor the configuration of the PEEL18LV8Z to the precise requirements of your design. The programmable AND array of the PEEL18LV8Z (shown in Figure 15) is formed by input lines intersecting product terms. The input lines and product terms are used as follows: • Variable Product Term Distribution Programmable I/O Macrocell AND/OR Logic Array • When programming the PEEL18LV8Z, the device programmer first performs a bulk erase to remove the previous pattern. The erase cycle opens every logical connection in the array. The device is configured to perform the user-defined function by programming selected connections in the AND array. (Note that PEEL device programmers automatically program all of the connections on unused product terms so that they will have no effect on the output function). Macrocell Architecture Each I/O macrocell, as shown in Figure 4, consists of a Dtype flip-flop and two signal-select multiplexers. The four EEPROM bits controlling these multiplexers determine the configuration of each macrocell. These bits determine output polarity, output type (registered or non-registered) and input-feedback path (bidirectional I/O, combinatorial feedback). Refer to Table 1 for details. 36 Input Lines: - 20 input lines carry the true and complement of the signals applied to the 10 input pins - 16 additional lines carry the true and complement values of feedback or input signals from the 8 I/Os Equivalent circuits for the twelve macrocell configurations are illustrated in Figure 5. In addition to emulating the four PAL-type output structures (configurations 3, 4, 9, and 10), the macrocell provides eight additional configurations. When creating a PEEL device design, the desired macrocell configuration is generally specified explicitly in the design file. When the design is assembled or compiled, the macrocell configuration bits are defined in the last lines of the JEDEC programming file. 113 product terms: - 102 product terms are used to form sum of product functions - 8 output enable terms (one for each I/O) - 1 global synchronous preset term - 1 global asynchronous clear term - 1 programmable clock term At each input-line/product-term intersection, there is an EEPROM memory cell that determines whether or not there is a logical connection at that intersection. Each product term is essentially a 36-input AND gate. A product term that is connected to both the true and complement of an input signal will always be FALSE and thus will not affect the OR function that it drives. When all the connections on a product term are opened, a "don't care" state exists and that term will always be TRUE. Output Type The signal from the OR array can be fed directly to the output pin (combinatorial function) or latched in the D-type flip-flop (registered function). The D-type flip-flop latches data on the rising edge of the clock and is controlled by the global preset and clear terms. When the synchronous preset term is satisfied, the Q output of the register is set HIGH at the next rising edge of the clock input. Satisfying Anachip Corp. www.anachip.com.tw Rev. 1.0 Dec 16, 2004 3/10 the asynchronous clear sets Q LOW, regardless of the clock state. If both terms are satisfied simultaneously, the clear will override the preset. Combinatorial Feedback The signal-select multiplexer gives the macrocell the ability to feedback the output of the OR gate, bypassing the output buffer, regardless of whether the output function is registered or combinatorial. This feature allows the creation of asynchronous latches, even when the output must be disabled. (Refer to configurations 5, 6, 7, and 8 in Figure 5.) Output Polarity Each macrocell can be configured to implement active-high or active-low logic. Programmable polarity eliminates the need for external inverters. Registered Feedback Output Enable Feedback also can be taken from the register, regardless of whether the output function is programmed to be combinatorial or registered. When implementing a combinatorial output function, registered feedback allows for the internal latching of states without giving up the use of the external output. The output of each I/O macrocell can be enabled or disabled under the control of its associated programmable output enable product term. When the logical conditions programmed on the output enable term are satisfied, the output signal is propagated to the I/O pin. Otherwise, the output buffer is switched into the high-impedance state. Programmable Clock Options Under the control of the output enable term, the I/O pin can function as a dedicated input, a dedicated output, or a bidirectional I/O. Opening every connection on the output enable term will permanently enable the output buffer and yield a dedicated output. Conversely, if every connection is intact, the enable term will always be logically false and the I/O will function as a dedicated input. A unique feature of the PEEL18LV8Z is a programmable clock multiplexer that allows the user to select true or complement forms of either input pin or product-term clock sources. Operates in both 3 Volt and 3.3 Volt Systems The PEEL18LV8Z macrocell also provides control over the feedback path. The input/feedback signal associated with each I/O macrocell can be obtained from three different locations; from the I/O input pin, from the Q output of the flip-flop (registered feedback), or directly from the OR gate (combinatorial feedback). The PEEL18LV8Z is designed to operate with a V CC range of 2.7 to 3.6 Volts D.C. This allows operation in both 3 Volt 10% (battery operated) and 3.3 Volt 10% (power supply operated) systems. The propagation delay t PD is 5 ns slower at the lower voltage, but this is typically not an issue in battery-operated systems (see - A.C. Electrical CharacteristicsTable 1 - Absolute Maximum Ratings- A.C. Electrical Characteristics). Bi-directional I/O Schmitt Trigger Inputs Input/Feedback Select The PEEL18LV8Z has Schmitt trigger input buffers on all inputs, including the clock. Schmitt trigger inputs allow direct input of slow signals such as biomedical and sine waves or clocks. They are also useful in cleaning up noisy signals. This makes the PEEL18LV8Z especially desirable in portable applications where the environment is less predictable. The input/feedback signal is taken from the I/O pin when using the pin as a dedicated input or as a bi-directional I/O. (Note that it is possible to create a registered output function with a bi-directional I/O, refer to Figure 4). Zero Power Feature The CMOS PEEL18LV8Z features "Zero-Power" standby operation for ultra-low power consumption. With the "ZeroPower" feature, transition-detection circuitry monitors the inputs, I/Os (including CLK) and feedbacks. If these signals do not change for a period of time greater than approximately three t PD 's, the outputs are latched in their current state and the device automatically powers down. When the next signal transition is detected, the device will "wake up" for active operation until the signals stop Figure 4 - PEEL18LV8Z I/O Macro cell Anachip Corp. www.anachip.com.tw Rev. 1.0 Dec 16, 2004 4/10 switching long enough to trigger the next power-down. (Note that the tPD is approximately 5 ns. slower on the first transition from sleep mode.) When the PEEL18LV8Z is powered up, a built-in feature holds the outputs in tri-state until Vcc reaches 2.2V. This prevents output transitions during power-up. As a result of the "Zero-Power" feature, significant power savings can be realized for combinatorial or sequential operations when the inputs or clock change at a modest rate. See Figure 6. Figure 5 - Equivalent Circuits for the twelve configurations of the PEEL18LV8Z I/O Macrocell Configuration # A B C D 1 2 3 4 5 6 7 8 9 10 11 12 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 1 0 0 1 1 0 0 1 1 1 1 0 0 1 1 1 1 0 0 1 1 0 0 0 0 1 1 1 1 0 0 0 0 Input/Feedback Select Output Select Register Bi-directional I/O Combinatorial Register Combinatorial Feedback Combinatorial Register Register Feedback Combinatorial Anachip Corp. www.anachip.com.tw Active Low Active High Active Low Active High Active Low Active High Active Low Active High Active Low Active High Active Low Active High Rev. 1.0 Dec 16, 2004 5/10 programmed. Once the security bit is set it is impossible to verify (read) or program the PEEL until the entire device has first been erased with the bulk-erase function. 100 10 Signature Word ICC in mA The signature word feature allows a 64-bit code to be programmed into the PEEL18LV8Z if the software option is used. The code can be read back even after the security bit has been set. The signature word can be used to identify the pattern programmed into the device or to record the design revision, etc. 1 0.1 0.01 0.01 Programming Support 0.1 1 10 100 Anachip's JEDEC file translator allows easy conversion of existing 20 pin PLD designs to the PEEL18LV8Z, without the need for redesign. Anachip also offers (for free) its proprietary PLACE software, an easy-to-use entry level PC-based software development system. Frequency in MHz Figure 6 - Typical ICC vs. Input Clock Frequency for the 18LV8Z Design Security Programming support includes all the popular third party programmers such as BP Microsystems, System General, Logic Devices and numerous others. The PEEL18LV8Z provides a special EEPROM security bit that prevents unauthorized reading or copying of designs programmed into the device. The PLD programmer sets the security bit, either at the conclusion of the programming cycle or as a separate step, after the device has been Anachip Corp. www.anachip.com.tw Rev. 1.0 Dec 16, 2004 6/10 This device has been designed and tested for the specified operating ranges. Improper operation outside of these levels is not guaranteed. Exposure to absolute maximum ratings may cause permanent damage. Table 1 - Absolute Maximum Ratings Symbol VCC Parameter Conditions Supply Voltage VI , VO IO Relative to Ground Voltage Applied to Any Pin 2 Output Current Relative to Ground Rating Unit -0.5 to + 6.0 V -0.5 to 5.5 V ± 25 mA -65 to +150 °C +300 °C 1 Per Pin (I OL , I OH ) TST Storage Temperature TLT Lead Temperature Soldering 10 Seconds Table 2 - Operating Range Symbol Parameter 3 Vcc Supply Voltage TA Ambient Temperature TRVCC Conditions Min Max Unit Commercial / Industrial 2.7 3.6 V Commercial Industrial See Note 4 0 -40 +70 +85 250 °C VCC Rise Time ms Table 3 - D. C. Electrical Characteristics Over the operating range (unless otherwise specified) Symbol VOH VOHC VOL VOLC Parameter Conditions Min Max Unit Output HIGH Voltage - TTL VCC = Min, IOH = -2.0 mA VCC - 0.5 V Output HIGH Voltage - CMOS VCC = Min, IOH = -10 A VCC - 0.3 V Output LOW Voltage - TTL VCC = Min, IOL = 8.0 mA 0.4 V Output LOW Voltage - CMOS VCC = Min, IOL = 10 A 0.15 V Input HIGH Voltage VCC = 3.3 V 2.0 5.5 V VIL Input LOW Voltage VCC = 3.3 V -0.3 0.8 VH Input Voltage Hysteresis VIH Input Leakage Current IIN I/O Leakage Current 0.2 VCC = Max, GND ≤ VIN ≤ VCC, I/O = High Z +/- 1 µA VCC = Min, GND ≤ VIN ≤ 5.5V, I/O = High Z 25 µA VCC = Max, GND ≤ VIN ≤ VCC, I/O = High Z +/- 1 µA 500 µA VCC = Min, GND ≤ VIN ≤ 5.5V, I/O = High Z 5 5 (typ) 25 µA 5 1.5 (typ) 3 mA 6 pF 12 pF ICCS VCC Current, Standby VIN = 0V or VCC, All Outputs disabled 11 VCC Current, f=1MHz VIN = 0V or VCC, All Outputs disabled ICC 8 Input Capacitance CIN 8 COUT Output Capacitance V V TA = 25°C, VCC = Max @ f = 1 MHz Anachip Corp. www.anachip.com.tw Rev. 1.0 Dec 16, 2004 7/10 Table 4 - A.C. Electrical Characteristics Over the operating range9 Symbol -15/I-15 3V±10% 3.3V±10% Min Max Min Max Parameter 6 tPD Input to non-registered output in continuous mode 13 Units 20 15 ns 6 7 20 15 ns 6 7 20 15 ns tOE Input to output enable tOD Input to output disable tCO1 Clock to Output 17 12 ns tCO2 30 25 ns tCF Clock to comb output delay via internal registered feedback Clock to Feedback tSC Input or feedback setup to clock tHC Input hold after clock 13 6 6 tCL, tCH tCP Clock low time, clock high time 9 Min clock period Ext (tSC + tCO1 ) fMAX1 Internal feedback 1/ (tSC + tCF) fMAX2 External Feedback (1/ tCP) fMAX3 12 12 No Feedback 1/ (tCL + tCH) 12 8 ns 17 12 ns 0 0 ns 15 10 ns 32 24 ns 33.3 50 MHz 31.25 41.67 MHz 33.3 50 MHz 20 15 ns tAW Asynchronous Reset Pulse Width tAP Input to Asynchronous Reset 20 15 ns tAR Asynchronous Reset recovery time 20 15 ns 5 5 µs tRESET Power-on reset time for registers in clear state 14 Inputs I/O, Registered Feedback, Synchronous Preset Clock Asynchronous Reset Registered O utputs Combinatorial O utputs Figure 7 - Switching Waveforms Notes: 1. 2. 3. 4. 5. 6. 7. Minimum DC input is -0.5V, however, inputs may undershoot to -2.0V for periods less than 20 ns. VI and VO are not specified for program / verify operation. The Supply Voltage range of 2.7 to 3.6V was chosen to allow this part to be used in both 3V ±10% and 3.3V ±10% applications. Test Points for Clock and VCC in tR and tF are referenced at the 10% and 90% levels. I/O pins are 0V and VCC . "Input" refers to an input pin signal. tOE is measured from input transition to V REF± 0.1V, TOD is measured from input transition to VOH -0.1V or VOL +0.1V; VREF =VL. 8. 9. 10. 11. 12. 13. 14. Anachip Corp. www.anachip.com.tw Capacitances are tested on a sample basis. Test conditions assume: signal transition times of 3ns or less from the 10% and 90% points, timing reference levels of 1.5V (Unless otherwise specified). Test one output at a time for duration of less than 1 second. ICC for a typical application: This parameter is tested with the device programmed as an 8-bit Counter. Parameters are not 100% tested. Specifications are based on initial characterization and are tested after any design process modification that might affect operational frequency. tPD , tOE , tOD , tCO , tSC , and tAP are approximately 5 ns. slower on the first transaction from sleep mode. All inputs at GND. Rev. 1.0 Dec 16, 2004 8/10 3.15V Standard Load VL Thevenin Equivalent R1 RL Output Output CL CL R2 Figure 8 - PEEL™ Device and Array Test Loads Technology R1 R2 RL VL CL CMOS 284 kΩ 258 kΩ 113 kΩ 1.275V 33 pF TTL 308 Ω 433 Ω 180 Ω 1.840V 33 pF Ordering Information Part Number Speed Temperature Package PEEL18LV8ZP-15 (L) 15ns Commercial 20-pin Plastic DIP PEEL18LV8ZPI-15 (L) 15ns Industrial 20-pin Plastic DIP PEEL18LV8ZJ-15 (L) 15ns Commercial 20-pin PLCC PEEL18LV8ZJI-15 (L) 15ns Industrial 20-pin PLCC PEEL18LV8ZS-15 (L) 15ns Commercial 20-pin SOIC PEEL18LV8ZSI-15 (L) 15ns Industrial 20-pin SOIC PEEL18LV8ZT-15 (L) 15ns Commercial 20-pin TSSOP PEEL18LV8ZTI-15 (L) 15ns Industrial 20-pin TSSOP Part Number Device Suffix PEELTM18LV8Z PI-15X Lead Free Package Speed P = 20-pin Plastic 300mil DIP J = 20-pin Plastic (J) Leaded Chip Carrier (PLCC) S = 20-pin SOIC 300 mil Gullwing T = 20-pin TSSOP 170 mil Blank : Normal L : Lead Free Package -15 = 15ns tpd Temperature Range (Blank) = Commercial 0 to +70oC I = Industrial -40 to +85oC Anachip Corp. www.anachip.com.tw Rev. 1.0 Dec 16, 2004 9/10 Corporate Office Email: [email protected] 780 Montague Expressway, #201 San Jose, CA 95131 TEL (408) 321-9600 FAX (408) 321-9696 Website: http://www.anachip.com ©2002 Anachip Corporation Anachip reserves the right to make changes in specifications at any time and without notice. The information furnished by Anachip in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Anachip for its use nor for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of Anachip. Anachip’s products are not authorized for use as critical components in life support devices or systems. Marks bearing © or ™ are registered trademarks and trademarks of Anachip Corp. Anachip Corp. www.anachip.com.tw Rev. 1.0 Dec 16, 2004 10/10