SMT POWER INDUCTORS Flat Coils - PG0155NL Series All Inductors are RoHS Compliant Height: 3.7mm Max Footprint: 11.0mm x 10.4mm Max Current Rating: up to 24A Inductance Range: 0.30µH to 0.91µH High temperature core material, no thermal aging below 150°C Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C 1 Part Number Inductance @Irated 2 (μH TYP) Irated 3 (A) PG0155.331NL 0.30 PG0155.601NL 0.53 PG0155.102NL 0.91 Saturation 4 Current I S A T (A) Heating 5 Current I D C (A) TYP MAX 24 1.7 2.2 0.33 38 24 81.36 19 2.8 3.2 0.60 27 19 108.47 14 5.3 5.8 1.0 21.5 14 142.73 Schematic Mechanical .433 MAX 11,00 .410 10,40 MAX H 1 PG0155.XXXNL Date Code Country of Origin 2 2x .118 ± .005 3,00 ± 0.12 Part No. .228 ± .005 5,80 ± 0.12 .276 ± .005 7,00 ± 0.12 Max. Height “H” (in./mm) PG0155.331NL .146/3,7 PG0155.601NL .146/3,7 PG0155.102NL .142/3,6 SUGGESTED PAD LAYOUT .014 ± .002 0,35 ± 0,05 Core Loss 6 Factor (K2) Inductance @0A D C (μH ±20%) DCR (m Ω) .079 2,00 .157 4,00 .069 1,75 Weight . . . . . . . . . . .1.6 grams Tape & Reel . . . . . . . .850/reel Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .453 11,50 .945 ± .012 24,00 ± 0,30 .158 4,00 TAPE & REEL LAYOUT .630 16,00 USER DIRECTION OF FEED USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com P613.C (10/07) SMT POWER INDUCTORS Flat Coils - PG0155NL Series Notes from Tables 1. The temperature of the component (ambient plus temperature rise) must be within the standard operating temperature range. 2. Inductance at Irated is a typical inductance value for the component taken at rated current. 3. The rated current listed is the lower of the saturation current @ 25°C or the heating current. 4. The saturation current, Isat, is the current at which the component inductance drops by 20% (typical) at an ambient temperature of 25°C. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 5. The heating current, IDC, is the DC current required to raise the component temperature by approximately 40°C. The heating current is determined by mounting the component on a typical PCB and applying current for 30 minutes. The temperature is measured by placing the thermocouple on top of the unit under test. Take note that the component’s performance varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 6. Core loss approximation is based on published core data: Core Loss = K1 * (f)1.30 * (K2ΔI)2.41 Where: Core Loss = in Watts K1 = 1.20E-10 f = switching frequency in kHz K1 & K2 = core loss factors ΔI = delta I across the component in Ampere ΔI = one half of the peak to peak flux density K2Δ across the component in Gauss 7. Unless otherwise specified, all testing is made at 100kHz, 0.1VAC. 8. Add suffix "T" to the part number for Tape & Reel packaging (ex: PG0155.331NLT). Inductance vs Current Characteristics 1.0 PG0155.102NL PG0155.601NL 0.5 55 51 53 49 47 45 43 41 37 39 35 33 31 27 29 25 21 23 19 17 15 11 13 7 9 0.0 5 PG0155.331NL 1 3 INDUCTANCE(µH) 1.5 CURRENT(A) Typical Core Loss vs Peak Flux Density 1.80 CoreLoss (W) 1.60 1.40 400 kHz 500 kHz 1.20 1.00 200 kHz 300 kHz 1.0 MHz 0.80 100 kHz 0.60 0.40 0.20 0.00 100 200 300 400 500 600 700 800 900 1000 DB (Gauss) where DB = K2DI For More Information: Pulse Worldwide Headquarters Pulse Europe 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 7032 7806 0 Fax: 49 7032 7806 12 Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Tech-Innovation International Tenth Kejinan Rd. High-Tech Industrial Park Nanshan District, Shenzhen China Tel: 86 755 33966678 Fax: 86 755 33966700 Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Tao Yuan Hsien Taiwan, R. O. C. Tel: 86 21 54643211/2 Fax: 86 21 54643210 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4641811 Fax: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com P613.C (10/07)