ETC PHAP3301A

PHAP33 series
Tact switches
Distinctive features and specifications
❑ Wide range of case formats
❑ SMT and through-hole models
❑ Normally closed models available
Models
Performances
PHAP3381
PHAP3382
PHAP3383
PHAP3384
PHAP3390
PHAP3391
PHAP3371
PHAP3372
PHAP3373
PHAP3374
PHAP3378
PHAP3355
PHAP3361
PHAP3362
PHAP3363
PHAP3365
PHAP3366
PHAP3301
PHAP3302
PHAP3303
PHAP3305
PHAP3306
PHAP3307
PHAP3308
PHAP3368
Current/voltage rating
50mA 12VDC
Contact resistance
100 mΩ max.
Insulation resistance
100 MΩ min.
Dielectric strength
Electrical life (cycles)
PHAP3350
PHAP3351
PHAP3352
PHAP3353
PHAP3320
PHAP3321
250 VAC min. (1 minute)
70.000
75.000
30.000
100.000
100.000
100.000
Operating force
1,6N ± 0,5N
1,6N +0,5/-0,3N
1,8N ± 0,5N
1,6N ± 0,5N
2N ± 0,3N
1,6N ± 0,5N
Travel
0,20/ 0,25 mm
0,25 mm
0,25 mm
0,25 mm
0,50 mm
0,30 mm
Operating temperature
-20°C to +70°C
Storage temperature
-30°C to +80°C
Vibrations
10-500 Hz / 10 g
IR reflow soldering
C
240°C for 20 seconds max.
Wave soldering
255°C for 5 seconds max.
Manual soldering
300°C for 3 seconds max.
-
Dimensions : First dimensions are in mm while inches are shown as bracketted numbers.
Packaging unit : 1.000 pieces and multiples, except for tape and reel packaging (see following pages).
APEM
www.apem.com
C-3
PHAP33 series
SMT tact switches
Microminiature and ultra-low profile - 4,2 x 4,2 mm case
• Ultra-compact size for board space saving : 4,2 x 4,2 mm case,
1,5 mm button height from PCB
• Reflow solderable
• With or without positioning pins
• For tape and reel packaging, add ”R” at the end of model number.
1.10
(.043)
1
3
2
4
2.80
(.110)
0.50
(.020)
3.50
(.137)
7.00
(.276)
1.50
(.059)
PHAP3390
2.60
(.102)
ø0.80
(.031 DIA)
Ø2.00
(.079DIA)
3.80
(.150)
Model number
4.20
(.165)
6.00
(.236)
0.60
(.024)
Ø0.70
(.028DIA)
C
1.40
(.055)
With positioning pins
4.80
(.188)
4.40
(.173)
Operating force : 2,6N ± 0,5N - Travel : 0,20 mm
1
2
3
4
Without positioning pins
6.00
(.236)
Model number
1.50
(.059)
PHAP3391
4.80
(.188)
Ø2.00
(.079DIA)
1
3
2
4
3.80
(.150)
4.20
(.165)
7.00
(.276)
1.10
(.043)
0.50
(.020)
2.60
(.102)
3.50
(.137)
4.40
(.173)
Operating force : 2,6N ± 0,5N - Travel : 0,20 mm
1
2
3
4
PACKAGING
ETIQUETTE
LABEL
(LABEL)
Quantity per reel : 3.400 pieces
Ø330.00
(13.00 DIA)
C-4
www.apem.com
2.00
(.079)
2.50
(.098)
2.00
(.079)
12.00
(.472)
Ø1.50
(.059 DIA)
5.50
(.217)
2.00
(.079)
1.75
(.069)
To order a product with tape and reel
packaging, add ”R” at the end of its
model number.
Example : PHAP3390R.
4.00
(.157)
14.00
(.551)
Ø13.00
(.512 DIA)
8.00
(.315)
APEM
PHAP33 series
SMT tact switches
Ultra-low profile - 6 x 6 mm case
• Ultra-compact size for board space saving : 6 x 6 mm case,
1,6 mm button height from PCB
• Reflow solderable
• Types for iron soldering (L = 10 mm)
• With positioning pins
• With or without grounding tab for protection against electrostatic
discharges
• For tape and reel packaging, add ”R” at the end of model number.
Without grounding tab
10 mm
2.30
(.091)
0.70
(.028)
1
1.60
(.063)
Ø3.00
(.118 DIA)
Ø1.50
(.059 DIA)
6.60
(.260)
C
3
2
10.40
(.409)
8 mm
PHAP3382
4.50
(.177)
4.70
(.185)
PHAP3381
0.30
(.012)
L
Dim. «L»
4.70
(.185)
Model No
4.50
(.177)
6.00
(.236)
1.60
(.063)
Ø1.30
(.051 DIA)
6.00
(.236)
4
1.40
(.055)
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
PHAP3383
8 mm
PHAP3384
10 mm
0.70
(.028)
1 5 3
1.60
(.063)
L
2.30
(.091)
4.50
(.177)
4.70
(.185)
0.30
(.012)
6.00
(.236)
Dim. «L»
4.50
(.177)
4.70
(.185)
Model No
Ø1.30
(.051 DIA)
1.60
(.063)
6.00
(.236)
Ø3.00
(.118 DIA)
Ø1.50
(.059 DIA)
6.60
(.260)
2
10.40
(.409)
With grounding tab
4
1.40
(.055)
1
2
3
4
5
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
PACKAGING
2.00
(.079)
Quantity per reel : 2.200 pieces
Ø330.00
(13.00 DIA)
APEM
2.00
(.079)
www.apem.com
3.00
(.118)
Ø1.50
(.059 DIA)
7.50
(.295)
Ø13.00
(.512 DIA)
1.75
(.069)
To order a product with tape and reel
packaging, add ”R” at the end of its
model number.
Example : PHAP3383R.
4.00
(.157)
18.00
(.709)
16.00
(.630)
ETIQUETTE
LABEL
(LABEL)
12.00
(.472)
C-5
PHAP33 series
SMT tact switches
Low profile - 6,2 x 6,2 mm case
• Ultra-compact size for board space saving : 6,2 x 6,2 mm case,
2,6 to 3,4 mm button height from PCB
• Reflow solderable
• With or without grounding tab for protection against electrostatic
discharges
• Models with external terminals type G or internal terminals type J
• For tape and reel packaging, add ”R” at the end of model number.
External terminals type G (gullwing)
6.20
(.244)
4.00
(.157)
Ø3.00
(.118 DIA)
Dim. «L»
PHAP3371
2,6 mm
PHAP3371A
3,4 mm
0.70
(.028)
2.60
(.102)
4
12.00
(.433)
9.00
(.354)
Model No
2
6.20
(.244)
C
5.80
(.228)
L
1
4.00
(.157)
3
1.00
(.039)
1
2
3
4
Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm
6.20
(.244)
L
4.00
(.157)
Ø3.00
(.118 DIA)
2,6 mm
PHAP3372AR
3,4 mm
8.80
(.315)
Dim. «L»
6.20
(.244)
Model No
PHAP3372R
6.80
(.268)
2
0.70
(.028)
2.60
(.102)
4
1
2.80
(.110)
Internal terminals type J - tape and reel packaging
3
1.00
(.039)
4.00
(.157)
1
2
3
4
Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm
PACKAGING
2.00
(.079)
Quantity per reel : 1.600 pieces
Ø330.00
(13.00 DIA)
C-6
www.apem.com
2.00
(.079)
3.70
(.146)
Ø1.50
(.059 DIA)
7.50
(.295)
Ø13.00
(.512 DIA)
1.75
(.069)
To order a product with tape and reel
packaging, add ”R” at the end of its
model number.
Example : PHAP3371R.
4.00
(.157)
18.00
(.709)
16.00
(.630)
ETIQUETTE
LABEL
(LABEL)
12.00
(.472)
APEM
PHAP33 series
SMT tact switches
Low profile - 6,2 x 6,2 mm case
6.20
(.244)
2.60
(.102)
2.90
(.114)
1.40
(.055)
8.40
(.331)
Model No
PHAP3373
6.20
(.244)
8.00
(.315)
Ø3.00
(.118 DIA)
0.70
(.028)
4.50
(.177)
1.60
(.063)
Button height from PCB : 2,9 mm
2
4
1
3
4.50
(.177)
1
2
3
4
Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm
Button height from PCB : 3,1 mm - with grounding tab
6.20
(.244)
0.70
(.028)
4.50
(.177)
2.50
(.098)
2.60
(.102)
Ø3.00
(.118 DIA)
C
PHAP3374
Dim. «L»
0.70
(.028)
3.10
(.122)
8 mm
9.50
(.374)
L
Model No
6.20
(.244)
2 5 4
1
3
1.60
(.063)
4.50
(.177)
1
2
3
4
5
Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm
PACKAGING
2.00
(.079)
Quantity per reel : 1.700 pieces
Ø330.00
(13.00 DIA)
APEM
2.00
(.079)
www.apem.com
4.10
(.161)
Ø1.50
(.059 DIA)
7.50
(.295)
Ø13.00
(.512 DIA)
1.75
(.069)
To order a product with tape and reel
packaging, add ”R” at the end of its
model number.
Example : PHAP3373R.
4.00
(.157)
18.00
(.709)
16.00
(.630)
ETIQUETTE
LABEL
(LABEL)
12.00
(.472)
C-7
PHAP33 series
SMT tact switches
Normally closed - 7,6 x 7,6 mm case
• Compact size for board space saving : 7,6 x 7,6 mm case,
4,3 mm button height from PCB
• Reflow solderable
• Standard PCB layout
3.50
(.137)
PHAP3378R
1.00
(.039)
0.70
(.028)
10.00
(.393)
Model No
1.20
(.043)
7.60
(.299)
9.50
(.374)
C
4.30
(.169)
7.60
(.299)
Ø3.00
(.118DIA)
Normally closed
3
1
4
2
4.50
(.177)
4.50
(.177)
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
PACKAGING
4.00
(.157)
18.00
(.709)
2.00
(.079)
1.75
(.069)
Quantity per reel : 1.000 pieces
Ø330.00
(13.00 DIA)
C-8
www.apem.com
2.00
(.079)
4.60
(.181)
Ø1.50
(.059 DIA)
7.50
(.295)
Ø13.00
(.512 DIA)
16.00
(.630)
LABEL
12.00
(.472)
APEM
PHAP33 series
SMT tact switches
Microminiature - 6 x 3,5 mm case
• Ultra-compact size for board space saving : 6 x 3,5 mm case,
4,3 or 5 mm button height from PCB
• Right angle version available
13.20
(.520)
6.00
(.236)
5,0 mm
1.00
(.039)
4,3 mm
PHAP3361A
9.00
(.354)
Dim. «L»
PHAP3361
C
1
3.00
(.118)
Model No
3.50
(.138)
0.30
(.012)
0.40
(.016)
3.35
(.132)
Vertical mounting
2.00
(.098)
2
1.50
(.059)
3.50
(.138)
1.00
(.039)
L
2
1
For tape and reel packaging, add “R” at the end of model number.
Operating force : 1,8N ± 0,5N - Travel : 0,25 mm
3.30
(.130)
1
Model No
0.25
(.010)
3
0.60
(.024)
4.20
(.165)
6.90
(.272)
1.45
(.057)
4
5.30
(.209)
3.40
(.133)
PHAP3355R
2
0.80
(.034)
0.90
(.035)
0.60
(.024)
0.60
(.024)
1.75
(.069)
1.27
(.050)
1.50
(.059)
3.00
(.118)
2.50
(.098)
3.50
(.138)
Horizontal mounting
7.80
(.307)
1
2
3
4
Operating force : 1,8N ± 0,5N - Travel : 0,25 mm
PACKAGING
18.00
(.709)
1.75
(.069)
Quantity per reel :
PHAP3361R : 1.800 pieces
PHAP3361AR : 1.800 pieces
PHAP3355R : 2.000 pieces
Ø330.00
(13.00 DIA)
APEM
2.00
(.079)
2.00
(.079)
www.apem.com
3.60
(.141)
4.00
(.157)
16.00
(.629)
Ø13.00
(.512 DIA)
7.50
(.295)
Ø1.50
(.059 DIA)
LABEL
8.00
(.314)
C-9
PHAP33 series
SMT tact switches
Microminiature - Low profile - 6,1 x 3,7 mm case
• Ultra-compact size for board space saving : 6,1 x 3,7 mm case,
2,5 mm button height from PCB
• Available with flat or bent terminals
Flat terminals
1.20
(.047)
6.30
(.248)
PHAP3365R
9.30
(.366)
6.10
(.240)
1
8.00
(.314)
Model No
3.70
(.146)
2.50
(.098)
5.50
(.217)
2.60
(..102)
C
2
0.60
(.024)
1.40
(.055)
2
1
Operating force : 1,8N ± 0,5N - Travel : 0,25 mm
1
8.00
(.314)
6.10
(.240)
PHAP3366R
4.00
(.157)
1.20
(.047)
6.80
(.267)
Model No
3.70
(.146)
2.50
(.098)
5.50
(.217)
2.60
(.102)
Bent terminals
2
0.60
(.024)
1.40
(.055)
1
2
Operating force : 1,8N ± 0,5N - Travel : 0,25 mm
PACKAGING
2.00
(.079)
1.75
(.069)
Ø13.00
(.512 DIA)
Quantity per reel : 3.000 pieces
Ø330.00
(13.00 DIA)
C-10
2.00
(.079)
www.apem.com
2.80
(.110)
Ø1.50
(.059 DIA)
7.50
(.295)
18.00
(.709)
16.00
(.630)
4.00
(.157)
LABEL
8.00
(.314)
APEM
PHAP33 series
SMT tact switches
6 x 6 mm case
• 4,3 to 13 mm button height from PCB
• Excellent tactile feedback (snap dome)
• Standard PCB layout
• Caps for model with square actuator
Cap colours : 1 : blue - 2 : black - 3 : green
5 : yellow - 6 : red - 7 : ivory
Ø4.50
(.177 DIA)
5.50
(.217)
4.00
(.157 SQ)
5.50
(.217)
2.80
(.110)
2.80
(.110)
U5520 square
U5530 round
Round actuator
4.50
(.177)
black/white
PHAP3368A
5,0 mm
black/white
PHAP3368B
9,5 mm
black
PHAP3368C
8,0 mm
white
PHAP3368D
13,0 mm
black
PHAP3368E
7,3 mm
ivory
PHAP3368F
8,5 mm
grey
C
2
4
1
3
9.00
(.354)
4,3 mm
L
1.60
(.063)
PHAP3368
4.50
(.177)
Ø3.50
(.137 DIA)
Actuator colour
6.00
(.236)
Dim. «L»
9.00
(.354)
Model No
0.70
(.027)
0.40
(.016)
6.00
(.236)
1.40
(.055)
3.50
(.137)
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
Square actuator
4.50
(.177)
PHAP3368T
2.40
(.094)
6.00
(.236)
2
4
1
3
9.00
(.354)
2.40
(.094)
4.50
(.177)
1.60
(.063)
Model No
7.40
(.291)
6.00
(.236)
9.00
(.354)
0.70
(.027)
0.40
(.016)
1.40
(.055)
3.60
(.142)
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
APEM
12.00
(.472)
www.apem.com
0.30
(.012)
4.00
(.157)
4
1
3
0.80
(.034)
2
4.40
(.173)
4.50
(.177)
1.20
(.047)
6.40
(.252)
7.40
(.291)
4.40
(.173)
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
Quantity per reel : 650 pieces
2
3
7.00
(.275)
4.50
(.177)
3.20
(.126)
1.90
(.074)
0.70
(.027)
1
14.00
(.551)
3.40
(.133)
Model No
PHAP3305ASR
Ø3.50
(.137 DIA)
1.00
(.039)
4.50
(.177)
0.30 MAXI
(.012 MAXI)
Edge of PCB mounting
4
Ø2.30
(.090 DIA)
C-11
PHAP33 series
Through-hole tact switches
Microminiature - 6 x 3,5 mm case
• Ultra-compact size for board space saving : 6 x 3,5 mm case,
4,3 or 5 mm button height from PCB
• Crimped terminals for direct mounting onto PCB
• Moulded-in terminals for wave soldering
Straight terminals
4,3 mm
PHAP3362A
5,0 mm
1.00
(.039)
3.50
(.138)
0.30
(.012)
6.50
(.256)
PHAP3362
3.50
(.138)
0.30
(.012)
1
Ø1.25
(.049 DIA)
L
Dim. «L»
3.00
(.118)
2
6.50
(.256)
3.50
(.138)
Model No
2.80
(.110)
1.50
(.059)
1.80
(.071)
C
0.70
(.028)
6.00
(.236)
7.90
(.311)
2
1
Operating force : 1,8N ± 0,5N - Travel : 0,25 mm
3.72
(.146)
2.50
(.098)
2.50
(.098)
4.30
(.169)
1.00
(.039)
0.50
(.020)
5.00
(.197)
2.50
(.098)
Ø1.00
(.039 DIA)
3
4
0.30
(.012)
1
2
5.00
(.197)
PHAP3363
0.30
(.012)
5.90
(.232)
7.00
(.276)
Model No
1.45
(.057)
2.50
(.098)
1.50
(.059)
Horizontal mounting
Ø1.30
(.051 DIA)
7.00
(.276)
1
2
3
4
Operating force : 1,8N ± 0,5N - Travel : 0,25 mm
C-12
www.apem.com
APEM
PHAP33 series
Through-hole tact switches
6 x 6 mm case
• 4,3 to 13 mm button height from PCB
• Excellent tactile feedback (snap dome)
• Crimped terminals for direct mounting onto PCB
• With or without grounding tab for protection ag. electrostatic discharges
• Moulded-in terminals for wave soldering
• Caps for model with square actuator (L = 2,4 mm) :
Cap colours : 1 : blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7 : ivory
Ø4.50
(.177 DIA)
5.50
(.217)
4.00
(.157 SQ)
5.50
(.217)
2.80
(.110)
2.80
(.110)
U5520 square
U5530 round
Straight terminals
4,3 mm
black
PHAP3301A
5,0 mm
black
PHAP3301B
9,5 mm
black
PHAP3301C
8,0 mm
white
PHAP3301D
13,0 mm
black
PHAP3301E
7,3 mm
ivory
PHAP3301F
8,5 mm
grey
3.50
(.137)
L
6.00
(.236)
4.50
(.177)
2
3
Ø1.00
(.039 DIA)
1
0.50
(.019)
1.80
(.070)
C
4
6.50
(.255)
PHAP3301
4.50
(.177)
0.70
(.027)
Ø3.50
(.137 DIA)
Actuator colour
6.50
(.255)
0.30
(.011)
Dim. «L»
6.00
(.236)
Model No
3.60
(.141)
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
Straight terminals - with grounding tab
9,5 mm
black
PHAP3302C
8,0 mm
white
PHAP3302D
13,0 mm
black
PHAP3302E
7,3 mm
ivory
6.00
(.236)
2
4
5
3
Ø1.00
(.039 DIA)
1
0.50
(.019)
1.80
(.070)
3.60
(.141)
= =
PHAP3302B
4.50
(.177)
6.50
(.255)
black
L
Ø3.50
(.137 DIA)
5,0 mm
3.50
(.137)
0.30
(.011)
PHAP3302A
0.70
(.027)
6.50
(.255)
black
0.70
(.027)
Actuator colour
4,3 mm
6.00
(.236)
Dim. «L»
PHAP3302
6.35
(.250)
4.50
(.177)
1.50
(.059)
Model No
6.35
(.250)
1
2
3
4
5
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
Straight terminals - square actuator
4.50
(.177)
7.50
3.50
(.137) (.295)
PHAP3303
2,4mm
blue
PHAP3303A
2,8 mm
black
6.00
(.236)
2
4
1
3
Ø1.00
(.039 DIA)
6.50
(.255)
Actuator colour
4.50
(.177)
L
Dim. «L»
6.00
(.236)
Model No
6.50
(.255)
0.30
(.011)
0.70
(.027)
1.80
(.070)
3.60
(.141)
0.50
(.019)
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
APEM
www.apem.com
C-13
PHAP33 series
Through-hole tact switches
6 x 6 mm case
Horizontal mounting
black
PHAP3305B
8,35 mm
black
PHAP3305C
6,85 mm
white
PHAP3305D
11,85 mm
black
PHAP3305E
6,15 mm
ivory
PHAP3305T
6,15 mm
blue 2.4 x 2.4
0.70
(.027)
2
1.00
0.40
(.015) (.039)
2.50
(.098)
4.50
(.177)
7.00
(.275)
1
7.00
(.275)
3,85 mm
2.50
(.098)
3
4.50
(.177)
PHAP3305A
7.40
(.291)
Ø3.50
(.137 DIA)
black
3.50 7.20
(.137) (.283)
Actuator colour
3,15 mm
4.20
(.165)
Model No
1.80
(.070)
Dim. «L»
PHAP3305
4
Ø1.00
(.039 DIA)
0.30
(.011)
L
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
Horizontal mounting of 2 tact switches
PHAP3306B
8,35 mm
black
PHAP3306C
6,85 mm
white
PHAP3306D
11,85 mm
black
6,15 mm
0.30
(.012)
0.60
(.024)
2.00
(.079)
L
ivory
6.00
(.236)
7.50
(.295)
Long straight terminals + tape
7,0 mm
4
2
3
L
3.60
(.142)
0.30
(.012)
2.60
(.102)
PHAP3307G
18.00
(.709)
5,0 mm
0.50
(.020)
PHAP3307A
6.10
(.240)
9.00
(.354)
4,3 mm
0.70
(.028)
0.50
(.020)
Ø1.00
(.039 DIA)
1
5.00
(.197)
18.00
(.709)
PHAP3307
1
Ø3.50
(.138 DIA)
12.70
(.500)
Dim. «L»
Ø0.80
(.031 DIA)
8.00
(.315)
10.55
(.415)
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
Model No
0.40
(.016)
1.00
(.039)
6.10
(.240)
PHAP3306E
1
2
3
4
6.00
(.236)
black
2
6.35
(.250)
Ø4.00
(.157 DIA)
2
1
12.70
(.500)
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
Quantity per tape : 1.000 pieces
5.00
(.197)
black
3,85 mm
2.00
(.079)
3,15 mm
PHAP3306A
Ø1.30
(.051 DIA)
4.50
(.177)
8.00
(.315)
PHAP3306
3.00
(.118)
12.50
(.492)
Actuator colour
8.40
(.331)
6.10
(.240)
C
Dim. «L»
22.60
(.890)
Model No
5.60
(.220)
Straight terminals + LED
red
15mA
2,1V
PHAP3308G
green
30mA
2,2V
PHAP3308Y
yellow
30mA
2V
0.40
(.016)
6.50
(.256)
7.20
(.283)
6.50
(.256)
2.40
(.094)
0.20
(.008)
0.70
(.028)
0.18
(.007)
4.50
(.177)
1
4
2
3
5
2.00
(.079)
PHAP3308R
3.60
(.142)
0.40
(.016)
-
4.10
(.161)
1.50
(.059)
-
6.40
(.252)
4.20 5.80
(.165) (.228)
-
LED Vf
2.70
(.106)
PHAP3308
LED colour LED If
1.20
(.047)
Model No
2.50
(.098)
Ø0.80
(.031 DIA)
6
6.20
(.244)
Ø1.00
(.039 DIA)
1
2
3
4
5
6
4.50
(.177)
6.20
(.244)
Operating force : 1,6N ± 0,5N - Travel : 0,25 mm
C-14
www.apem.com
APEM
PHAP33 series
Through-hole tact switches
Sealed - 7,2 x 7,2 mm or 10 x 10 mm case
• Dust and splash proof
• Crimped terminals for direct mounting onto PCB
• With or without grounding tab for protection against electrostatic
discharges
• Moulded-in terminals for wave soldering
7,2 x 7,2 mm case - straight terminals - grounding or not
13,0 mm
Non grounding
Dim. «L»
PHAP3351
5,0 mm
PHAP3351A
9,0 mm
PHAP3351B
13,0 mm
1 5
3
2
4
7.90
(.311)
PHAP3350B
7.20
(.283)
9,0 mm
7.60
(.299)
PHAP3350A
7.90
(.311)
5,0 mm
9.10
(.358)
Dim. «L»
7.20
(.283)
0.70
(.027)
Ø3.00
(.118 DIA)
Grounding
PHAP3350
2.60
(.102)
1.00
(.039)
L
5.00
(.197)
5.00
(.197)
3.90
(.154)
1
2
3
4
5
Operating force : 2N ± 0,3N - Travel : 0,50 mm
7,2 x 7,2 mm case - right angle terminals
5.60
(.220)
8.00
(.315)
PHAP3352B
12,35 mm
8.00
(.315)
L
2.50
(.098)
3.00
(.118)
4
7.80
(.307)
8,35 mm
3.50
(.138)
PHAP3352A
Ø3.00
(.118 DIA)
4,35 mm
PHAP3352
2.50
(.098)
4.00
(.157)
Dim. «L»
0.60
(.024)
Model No
5.00
(.197)
3
Ø1.00
(.039 DIA)
Ø1.10
(.043 DIA)
7.80
(.307)
2
1
5.00
(.197)
3.50
(.138)
1
2
3
4
8.90
(.350)
Operating force : 2N ± 0,3N - Travel : 0,50 mm
0.70
(.028)
0.30
(.012)
4
1
3
6.00
(.236)
10.30
(.406)
13.00
(.512)
2
10.30
(.406)
11.70
(.461)
1.80
(.071)
10.00
(.394)
6.00
(.236)
3.50
(.138)
8.00
(.315)
Model No
PHAP3353
10.00
(.394)
10 x 10 mm case - straight terminals
1
2
3
4
Ø3.80
(.150 DIA)
10.00
(.394)
Ø1.00
(.039 DIA)
1
2
3
4
Operating force : 1,6N ± 0,5N - Travel : 0,50 mm
APEM
www.apem.com
C-15
C
PHAP33 series
Through-hole tact switches
12 x 12 mm case
• 4,3 to 12 mm button height from PCB
• Excellent tactile feedback (snap-dome)
• Crimped terminals for direct mounting onto PCB
• Moulded-in terminals for wave soldering
• Caps for model PHAP3321 :
5.70
(.224)
Cap colours : 1 : blue - 2 : black - 3 : green
5 : yellow - 6 : red - 7 : ivory
Ø11.50
(.453 DIA)
2.00
(.079)
12.00
(.472)
4.00
(.157)
R=1.00
(R.039)
1.50
(.059)
1.50
(.059)
R=1.00
(R.039)
12.00
(.472)
U5540 square
Ø13.00
(.512 DIA)
U5550 round
Straight terminals - short actuator
4.00
(.157)
0.3
1.00
X
(.039)
(.012)
3.50
(.138)
C
5.00
(.197)
PHAP3320A
7,5 mm
3
12.50
(.491)
4,3 mm
12.00
(.472)
PHAP3320
14.10
(.555)
Dim. «L»
12.50
(.491)
Model No
Ø6.70
(.263 DIA)
1
4x
2
L
5.00
(.197)
1.80
(.071)
1.20
(.047)
4
1
3
2
4
12.00
(.472)
Operating force : 1,6N ± 0,5N - Travel : 0,30 mm
Straight terminals - long keyed actuator
12.00
(.472)
3.50
(.138)
8.00
(.315)
0.3
1.00
X
(.039)
(.012)
1.20
(.047)
5.00
(.197)
0.30
(.012)
3
12.50
(.491)
12.00
(.472)
14.10
(.555)
12.50
(.491)
Model No
PHAP3320B
6.00
(.236)
1
4x
1.00
(.039)
2
1.80
(.071)
4.00
(.157)
5.00
(.197)
Ø4.00
(.157 DIA)
1.20
(.047)
4
1
3
2
4
12.00
(.472)
Operating force : 1,6N ± 0,5N - Travel : 0,30 mm
Straight terminals - square actuator
4.00
(.157)
0.3
1.00
X
(.039)
(.012)
3.80
(.150)
3.50
(.138)
1.80
(.071)
4x
2
7.30
(.287)
1.80
(.071)
5.00
(.197)
3
12.50
(.491)
12.00
(.472)
14.10
(.555)
12.50
(.491)
1
Model No
PHAP3321
5.00
(.197)
1.20
(.047)
4
1
3
2
4
12.00
(.472)
Operating force : 1,6N ± 0,5N - Travel : 0,30 mm
C-16
www.apem.com
APEM