PIC16C71X
8-Bit CMOS Microcontrollers with A/D Converter
Devices included in this data sheet:
PIC16C71X Peripheral Features:
•
•
•
•
• Timer0: 8-bit timer/counter with 8-bit prescaler
• 8-bit multichannel analog-to-digital converter
• Brown-out detection circuitry for
Brown-out Reset (BOR)
• 13 I/O Pins with Individual Direction Control
PIC16C710
PIC16C71
PIC16C711
PIC16C715
PIC16C71X Microcontroller Core Features:
710
71
711 715
Program Memory (EPROM)
x 14
512
1K
1K
2K
Data Memory (Bytes) x 8
36
36
68
128
I/O Pins
13
13
13
13
Timer Modules
1
1
1
1
A/D Channels
4
4
4
4
In-Circuit Serial Programming
Yes Yes Yes Yes
Brown-out Reset
Yes
—
Interrupt Sources
4
4
Yes Yes
4
4
Pin Diagrams
PDIP, SOIC, Windowed CERDIP
•1
18
RA1/AN1
RA3/AN3/VREF
RA2/AN2
2
17
RA0/AN0
RA4/T0CKI
3
16
OSC1/CLKIN
MCLR/VPP
4
15
OSC2/CLKOUT
VSS
5
RB0/INT
6
RB1
RB2
7
8
RB3
14
VDD
13
RB7
12
11
RB6
RB5
9
10
RB4
SSOP
•1
20
RA1/AN1
RA3/AN3/VREF
RA2/AN2
2
19
RA0/AN0
RA4/T0CKI
3
18
OSC1/CLKIN
MCLR/VPP
4
VSS
5
VSS
6
RB0/INT
RB1
7
8
RB2
RB3
PIC16C710
PIC16C711
PIC16C715
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
PIC16C7X Features
PIC16C710
PIC16C71
PIC16C711
PIC16C715
• High-performance RISC CPU
• Only 35 single word instructions to learn
• All single cycle instructions except for program
branches which are two cycle
• Operating speed: DC - 20 MHz clock input
DC - 200 ns instruction cycle
• Up to 2K x 14 words of Program Memory,
up to 128 x 8 bytes of Data Memory (RAM)
• Interrupt capability
• Eight level deep hardware stack
• Direct, indirect, and relative addressing modes
• Power-on Reset (POR)
• Power-up Timer (PWRT) and
Oscillator Start-up Timer (OST)
• Watchdog Timer (WDT) with its own on-chip RC
oscillator for reliable operation
• Programmable code-protection
• Power saving SLEEP mode
• Selectable oscillator options
• Low-power, high-speed CMOS EPROM
technology
• Fully static design
• Wide operating voltage range: 2.5V to 6.0V
• High Sink/Source Current 25/25 mA
• Commercial, Industrial and Extended temperature
ranges
• Program Memory Parity Error Checking Circuitry
with Parity Error Reset (PER) (PIC16C715)
• Low-power consumption:
- < 2 mA @ 5V, 4 MHz
- 15 µA typical @ 3V, 32 kHz
- < 1 µA typical standby current
17
OSC2/CLKOUT
16
VDD
15
VDD
14
13
RB7
RB6
9
12
RB5
10
11
RB4
DS30272A-page 1
PIC16C71X
Table of Contents
1.0 General Description .................................................................................................................................................................... 3
2.0 PIC16C71X Device Varieties...................................................................................................................................................... 5
3.0 Architectural Overview................................................................................................................................................................ 7
4.0 Memory Organization ............................................................................................................................................................... 11
5.0 I/O Ports.................................................................................................................................................................................... 25
6.0 Timer0 Module.......................................................................................................................................................................... 31
7.0 Analog-to-Digital Converter (A/D) Module ................................................................................................................................ 37
8.0 Special Features of the CPU .................................................................................................................................................... 47
9.0 Instruction Set Summary .......................................................................................................................................................... 69
10.0 Development Support ............................................................................................................................................................... 85
11.0 Electrical Characteristics for PIC16C710 and PIC16C711 ....................................................................................................... 89
12.0 DC and AC Characteristics Graphs and Tables for PIC16C710 and PIC16C711.................................................................. 101
13.0 Electrical Characteristics for PIC16C715................................................................................................................................ 111
14.0 DC and AC Characteristics Graphs and Tables for PIC16C715 ............................................................................................ 125
15.0 Electrical Characteristics for PIC16C71.................................................................................................................................. 135
16.0 DC and AC Characteristics Graphs and Tables for PIC16C71 .............................................................................................. 147
17.0 Packaging Information ............................................................................................................................................................ 155
Appendix A: ...................................................................................................................................................................................... 161
Appendix B: Compatibility................................................................................................................................................................. 161
Appendix C: What’s New .................................................................................................................................................................. 162
Appendix D: What’s Changed .......................................................................................................................................................... 162
Index .................................................................................................................................................................................................. 163
PIC16C71X Product Identification System......................................................................................................................................... 173
To Our Valued Customers
We constantly strive to improve the quality of all our products and documentation. We have spent an exceptional
amount of time to ensure that these documents are correct. However, we realize that we may have missed a few
things. If you find any information that is missing or appears in error, please use the reader response form in the
back of this data sheet to inform us. We appreciate your assistance in making this a better document.
DS30272A-page 2
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
1.0
GENERAL DESCRIPTION
The PIC16C71X is a family of low-cost, high-performance, CMOS, fully-static, 8-bit microcontrollers with
integrated analog-to-digital (A/D) converters, in the
PIC16CXX mid-range family.
All PIC16/17 microcontrollers employ an advanced
RISC architecture. The PIC16CXX microcontroller family has enhanced core features, eight-level deep stack,
and multiple internal and external interrupt sources.
The separate instruction and data buses of the Harvard
architecture allow a 14-bit wide instruction word with
the separate 8-bit wide data. The two stage instruction
pipeline allows all instructions to execute in a single
cycle, except for program branches which require two
cycles. A total of 35 instructions (reduced instruction
set) are available. Additionally, a large register set gives
some of the architectural innovations used to achieve a
very high performance.
PIC16CXX microcontrollers typically achieve a 2:1
code compression and a 4:1 speed improvement over
other 8-bit microcontrollers in their class.
The PIC16C710/71 devices have 36 bytes of RAM, the
PIC16C711 has 68 bytes of RAM and the PIC16C715
has 128 bytes of RAM. Each device has 13 I/O pins. In
addition a timer/counter is available. Also a 4-channel
high-speed 8-bit A/D is provided. The 8-bit resolution is
ideally suited for applications requiring low-cost analog
interface, e.g. thermostat control, pressure sensing,
etc.
The PIC16C71X family has special features to reduce
external components, thus reducing cost, enhancing
system reliability and reducing power consumption.
There are four oscillator options, of which the single pin
RC oscillator provides a low-cost solution, the LP oscillator minimizes power consumption, XT is a standard
crystal, and the HS is for High Speed crystals. The
SLEEP (power-down) feature provides a power saving
mode. The user can wake up the chip from SLEEP
through several external and internal interrupts and
resets.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
A highly reliable Watchdog Timer with its own on-chip
RC oscillator provides protection against software lockup.
A UV erasable CERDIP packaged version is ideal for
code development while the cost-effective One-TimeProgrammable (OTP) version is suitable for production
in any volume.
The PIC16C71X family fits perfectly in applications
ranging from security and remote sensors to appliance
control and automotive. The EPROM technology
makes customization of application programs (transmitter codes, motor speeds, receiver frequencies, etc.)
extremely fast and convenient. The small footprint
packages make this microcontroller series perfect for
all applications with space limitations. Low cost, low
power, high performance, ease of use and I/O flexibility
make the PIC16C71X very versatile even in areas
where no microcontroller use has been considered
before (e.g. timer functions, serial communication, capture and compare, PWM functions and coprocessor
applications).
1.1
Family and Upward Compatibility
Users familiar with the PIC16C5X microcontroller family will realize that this is an enhanced version of the
PIC16C5X architecture. Please refer to Appendix A for
a detailed list of enhancements. Code written for the
PIC16C5X can be easily ported to the PIC16CXX family of devices (Appendix B).
1.2
Development Support
PIC16C71X devices are supported by the complete
line of Microchip Development tools.
Please refer to Section 10.0 for more details about
Microchip’s development tools.
DS30272A-page 3
PIC16C71X
TABLE 1-1:
PIC16C71X FAMILY OF DEVICES
PIC16C710
Clock
Memory
Memory
PIC16C72
PIC16CR72(1)
20
20
20
20
20
EPROM Program Memory
(x14 words)
512
1K
1K
2K
2K
—
ROM Program Memory
(14K words)
—
—
—
—
—
2K
Data Memory (bytes)
36
36
68
128
128
128
Timer Module(s)
TMR0
TMR0
TMR0
TMR0
TMR0,
TMR1,
TMR2
TMR0,
TMR1,
TMR2
—
—
—
—
1
1
Serial Port(s)
(SPI/I2C, USART)
—
—
—
—
SPI/I2C
SPI/I2C
Parallel Slave Port
—
—
—
—
—
—
A/D Converter (8-bit) Channels 4
4
4
4
5
5
Interrupt Sources
4
4
4
4
8
8
I/O Pins
13
13
13
13
22
22
Voltage Range (Volts)
2.5-6.0
3.0-6.0
2.5-6.0
2.5-5.5
2.5-6.0
3.0-5.5
In-Circuit Serial Programming
Yes
Yes
Yes
Yes
Yes
Yes
Brown-out Reset
Yes
—
Yes
Yes
Yes
Yes
Packages
18-pin DIP, 18-pin DIP, 18-pin DIP, 18-pin DIP, 28-pin SDIP, 28-pin SDIP,
SOIC;
SOIC
SOIC;
SOIC;
SOIC, SSOP SOIC, SSOP
20-pin SSOP
20-pin SSOP 20-pin SSOP
PIC16C74A
PIC16C76
PIC16C77
Maximum Frequency
of Operation (MHz)
20
20
20
20
EPROM Program Memory
(x14 words)
4K
4K
8K
8K
Data Memory (bytes)
192
192
376
376
Timer Module(s)
TMR0,
TMR1,
TMR2
TMR0,
TMR1,
TMR2
TMR0,
TMR1,
TMR2
TMR0,
TMR1,
TMR2
2
2
2
2
Serial Port(s)
(SPI/I2C, USART)
SPI/I2C, USART
SPI/I2C, USART
SPI/I2C, USART
SPI/I2C, USART
Parallel Slave Port
—
Capture/Compare/PWM
Peripherals Module(s)
Features
PIC16C715
20
PIC16C73A
Clock
PIC16C711
Maximum Frequency
of Operation (MHz)
Capture/Compare/PWM
Peripherals Module(s)
Features
PIC16C71
Yes
—
Yes
A/D Converter (8-bit) Channels 5
8
5
8
Interrupt Sources
11
12
11
12
I/O Pins
22
33
22
33
Voltage Range (Volts)
2.5-6.0
2.5-6.0
2.5-6.0
2.5-6.0
In-Circuit Serial Programming
Yes
Yes
Yes
Yes
Brown-out Reset
Yes
Yes
Yes
Yes
Packages
28-pin SDIP,
SOIC
40-pin DIP;
44-pin PLCC,
MQFP, TQFP
28-pin SDIP,
SOIC
40-pin DIP;
44-pin PLCC,
MQFP, TQFP
All PIC16/17 Family devices have Power-on Reset, selectable Watchdog Timer, selectable code protect and high I/O current capability. All PIC16C7XX Family devices use serial programming with clock pin RB6 and data pin RB7.
Note 1: Please contact your local Microchip sales office for availability of these devices.
DS30272A-page 4
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
2.0
PIC16C71X DEVICE VARIETIES
A variety of frequency ranges and packaging options
are available. Depending on application and production
requirements, the proper device option can be selected
using the information in the PIC16C71X Product Identification System section at the end of this data sheet.
When placing orders, please use that page of the data
sheet to specify the correct part number.
For the PIC16C71X family, there are two device “types”
as indicated in the device number:
1.
2.
2.1
C, as in PIC16C71. These devices have
EPROM type memory and operate over the
standard voltage range.
LC, as in PIC16LC71. These devices have
EPROM type memory and operate over an
extended voltage range.
UV Erasable Devices
The UV erasable version, offered in CERDIP package
is optimal for prototype development and pilot
programs. This version can be erased and
reprogrammed to any of the oscillator modes.
2.3
Quick-Turnaround-Production (QTP)
Devices
Microchip offers a QTP Programming Service for factory production orders. This service is made available
for users who choose not to program a medium to high
quantity of units and whose code patterns have stabilized. The devices are identical to the OTP devices but
with all EPROM locations and configuration options
already programmed by the factory. Certain code and
prototype verification procedures apply before production shipments are available. Please contact your local
Microchip Technology sales office for more details.
2.4
Serialized Quick-Turnaround
Production (SQTPSM) Devices
Microchip offers a unique programming service where
a few user-defined locations in each device are programmed with different serial numbers. The serial numbers may be random, pseudo-random, or sequential.
Serial programming allows each device to have a
unique number which can serve as an entry-code,
password, or ID number.
Microchip's PICSTART Plus and PRO MATE II
programmers both support programming of the
PIC16C71X.
2.2
One-Time-Programmable (OTP)
Devices
The availability of OTP devices is especially useful for
customers who need the flexibility for frequent code
updates and small volume applications.
The OTP devices, packaged in plastic packages, permit the user to program them once. In addition to the
program memory, the configuration bits must also be
programmed.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 5
PIC16C71X
NOTES:
DS30272A-page 6
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
3.0
ARCHITECTURAL OVERVIEW
The high performance of the PIC16CXX family can be
attributed to a number of architectural features commonly found in RISC microprocessors. To begin with,
the PIC16CXX uses a Harvard architecture, in which,
program and data are accessed from separate memories using separate buses. This improves bandwidth
over traditional von Neumann architecture in which program and data are fetched from the same memory
using the same bus. Separating program and data
buses further allows instructions to be sized differently
than the 8-bit wide data word. Instruction opcodes are
14-bits wide making it possible to have all single word
instructions. A 14-bit wide program memory access
bus fetches a 14-bit instruction in a single cycle. A twostage pipeline overlaps fetch and execution of instructions (Example 3-1). Consequently, all instructions (35)
execute in a single cycle (200 ns @ 20 MHz) except for
program branches.
The table below lists program memory (EPROM) and
data memory (RAM) for each PIC16C71X device.
Device
PIC16C710
PIC16C71
PIC16C711
PIC16C715
Program
Memory
PIC16CXX devices contain an 8-bit ALU and working
register. The ALU is a general purpose arithmetic unit.
It performs arithmetic and Boolean functions between
the data in the working register and any register file.
The ALU is 8-bits wide and capable of addition, subtraction, shift and logical operations. Unless otherwise
mentioned, arithmetic operations are two's complement in nature. In two-operand instructions, typically
one operand is the working register (W register). The
other operand is a file register or an immediate constant. In single operand instructions, the operand is
either the W register or a file register.
The W register is an 8-bit working register used for ALU
operations. It is not an addressable register.
Depending on the instruction executed, the ALU may
affect the values of the Carry (C), Digit Carry (DC), and
Zero (Z) bits in the STATUS register. The C and DC bits
operate as a borrow bit and a digit borrow out bit,
respectively, in subtraction. See the SUBLW and SUBWF
instructions for examples.
Data Memory
512 x 14
1K x 14
1K x 14
2K x 14
36 x 8
36 x 8
68 x 8
128 x 8
The PIC16CXX can directly or indirectly address its
register files or data memory. All special function registers, including the program counter, are mapped in the
data memory. The PIC16CXX has an orthogonal (symmetrical) instruction set that makes it possible to carry
out any operation on any register using any addressing
mode. This symmetrical nature and lack of ‘special
optimal situations’ make programming with the
PIC16CXX simple yet efficient. In addition, the learning
curve is reduced significantly.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 7
PIC16C71X
FIGURE 3-1:
Device
PIC16C71X BLOCK DIAGRAM
Program Memory Data Memory (RAM)
PIC16C710
PIC16C71
PIC16C711
PIC16C715
512 x 14
1K x 14
1K x 14
2K x 14
36 x 8
36 x 8
68 x 8
128 x 8
13
8
Data Bus
Program Counter
PORTA
EPROM
Program
Memory
Program
Bus
RAM
File
Registers
8 Level Stack
(13-bit)
14
RA0/AN0
RA1/AN1
RA2/AN2
RA3/AN3/VREF
RA4/T0CKI
RAM Addr (1)
PORTB
9
Addr MUX
Instruction reg
Direct Addr
7
8
Indirect
Addr
FSR reg
RB0/INT
RB7:RB1
STATUS reg
8
3
MUX
Power-up
Timer
Instruction
Decode &
Control
Timing
Generation
OSC1/CLKIN
OSC2/CLKOUT
Oscillator
Start-up Timer
Power-on
Reset
ALU
8
W reg
Watchdog
Timer
Brown-out
Reset(2)
Timer0
MCLR
VDD, VSS
A/D
Note 1: Higher order bits are from the STATUS register.
2: Brown-out Reset is not available on the PIC16C71.
DS30272A-page 8
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
TABLE 3-1:
Pin Name
PIC16C710/71/711/715 PINOUT DESCRIPTION
DIP SSOP
Pin# Pin#(4)
SOIC
Pin#
I/O/P
Type
Buffer
Type
Description
ST/CMOS(3) Oscillator crystal input/external clock source input.
—
Oscillator crystal output. Connects to crystal or resonator in crystal
oscillator mode. In RC mode, OSC2 pin outputs CLKOUT which has
1/4 the frequency of OSC1, and denotes the instruction cycle rate.
4
4
4
I/P
ST
Master
clear (reset) input or programming voltage input. This pin is
MCLR/VPP
an active low reset to the device.
PORTA is a bi-directional I/O port.
RA0/AN0
17
19
17
I/O
TTL
RA0 can also be analog input0
RA1/AN1
18
20
18
I/O
TTL
RA1 can also be analog input1
RA2/AN2
1
1
1
I/O
TTL
RA2 can also be analog input2
RA3/AN3/VREF
2
2
2
I/O
TTL
RA3 can also be analog input3 or analog reference voltage
RA4/T0CKI
3
3
3
I/O
ST
RA4 can also be the clock input to the Timer0 module. Output is
open drain type.
PORTB is a bi-directional I/O port. PORTB can be software programmed for internal weak pull-up on all inputs.
RB0 can also be the external interrupt pin.
RB0/INT
6
7
6
I/O
TTL/ST(1)
RB1
7
8
7
I/O
TTL
RB2
8
9
8
I/O
TTL
RB3
9
10
9
I/O
TTL
RB4
10
11
10
I/O
TTL
Interrupt on change pin.
RB5
11
12
11
I/O
TTL
Interrupt on change pin.
RB6
12
13
12
I/O
TTL/ST(2)
Interrupt on change pin. Serial programming clock.
RB7
13
14
13
I/O
TTL/ST(2)
Interrupt on change pin. Serial programming data.
VSS
5
4, 6
5
P
—
Ground reference for logic and I/O pins.
VDD
14 15, 16
14
P
—
Positive supply for logic and I/O pins.
Legend: I = input
O = output
I/O = input/output
P = power
— = Not used
TTL = TTL input
ST = Schmitt Trigger input
Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt.
2: This buffer is a Schmitt Trigger input when used in serial programming mode.
3: This buffer is a Schmitt Trigger input when configured in RC oscillator mode and a CMOS input otherwise.
4: The PIC16C71 is not available in SSOP package.
OSC1/CLKIN
16
18
16
I
OSC2/CLKOUT
15
17
15
O
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 9
PIC16C71X
3.1
Clocking Scheme/Instruction Cycle
3.2
The clock input (from OSC1) is internally divided by
four to generate four non-overlapping quadrature
clocks namely Q1, Q2, Q3 and Q4. Internally, the program counter (PC) is incremented every Q1, the
instruction is fetched from the program memory and
latched into the instruction register in Q4. The instruction is decoded and executed during the following Q1
through Q4. The clocks and instruction execution flow
is shown in Figure 3-2.
Instruction Flow/Pipelining
An “Instruction Cycle” consists of four Q cycles (Q1,
Q2, Q3 and Q4). The instruction fetch and execute are
pipelined such that fetch takes one instruction cycle
while decode and execute takes another instruction
cycle. However, due to the pipelining, each instruction
effectively executes in one cycle. If an instruction
causes the program counter to change (e.g. GOTO) then
two cycles are required to complete the instruction
(Example 3-1).
A fetch cycle begins with the program counter (PC)
incrementing in Q1.
In the execution cycle, the fetched instruction is latched
into the “Instruction Register” (IR) in cycle Q1. This
instruction is then decoded and executed during the
Q2, Q3, and Q4 cycles. Data memory is read during Q2
(operand read) and written during Q4 (destination
write).
FIGURE 3-2:
CLOCK/INSTRUCTION CYCLE
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
OSC1
Q1
Q2
Internal
phase
clock
Q3
Q4
PC
OSC2/CLKOUT
(RC mode)
EXAMPLE 3-1:
1. MOVLW 55h
PC
PC+1
Fetch INST (PC)
Execute INST (PC-1)
PC+2
Fetch INST (PC+1)
Execute INST (PC)
Fetch INST (PC+2)
Execute INST (PC+1)
INSTRUCTION PIPELINE FLOW
Tcy0
Tcy1
Fetch 1
Execute 1
2. MOVWF PORTB
3. CALL SUB_1
4. BSF PORTA, BIT3 (Forced NOP)
5. Instruction @ address SUB_1
Fetch 2
Tcy2
Tcy3
Tcy4
Tcy5
Execute 2
Fetch 3
Execute 3
Fetch 4
Flush
Fetch SUB_1 Execute SUB_1
All instructions are single cycle, except for any program branches. These take two cycles since the fetch
instruction is “flushed” from the pipeline while the new instruction is being fetched and then executed.
DS30272A-page 10
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
4.0
MEMORY ORGANIZATION
4.1
Program Memory Organization
The PIC16C71X family has a 13-bit program counter
capable of addressing an 8K x 14 program memory
space. The amount of program memory available to
each device is listed below:
PIC16C71/711 PROGRAM
MEMORY MAP AND STACK
PC<12:0>
CALL, RETURN
RETFIE, RETLW
13
Stack Level 1
Program
Memory
Address Range
PIC16C710
512 x 14
0000h-01FFh
PIC16C71
1K x 14
0000h-03FFh
PIC16C711
1K x 14
0000h-03FFh
PIC16C715
2K x 14
0000h-07FFh
For those devices with less than 8K program memory,
accessing a location above the physically implemented
address will cause a wraparound.
The reset vector is at 0000h and the interrupt vector is
at 0004h.
Stack Level 8
User Memory
Space
Device
FIGURE 4-1:
FIGURE 4-2:
Reset Vector
0000h
Interrupt Vector
0004h
0005h
On-chip Program
Memory
03FFh
PIC16C710 PROGRAM
MEMORY MAP AND STACK
0400h
PC<12:0>
CALL, RETURN
RETFIE, RETLW
1FFFh
13
FIGURE 4-3:
PIC16C715 PROGRAM
MEMORY MAP AND STACK
Stack Level 1
PC<12:0>
CALL, RETURN
RETFIE, RETLW
Stack Level 8
User Memory
Space
Reset Vector
0000h
13
Stack Level 1
Stack Level 8
Interrupt Vector
On-chip Program
Memory
0004h
0005h
Reset Vector
0000h
Interrupt Vector
0004h
0005h
01FFh
0200h
1FFFh
On-chip Program
Memory
07FFh
0800h
1FFFh
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 11
PIC16C71X
4.2
Data Memory Organization
The data memory is partitioned into two Banks which
contain the General Purpose Registers and the Special
Function Registers. Bit RP0 is the bank select bit.
RP0 (STATUS<5>) = 1 → Bank 1
RP0 (STATUS<5>) = 0 → Bank 0
Each Bank extends up to 7Fh (128 bytes). The lower
locations of each Bank are reserved for the Special
Function Registers. Above the Special Function Registers are General Purpose Registers implemented as
static RAM. Both Bank 0 and Bank 1 contain special
function registers. Some "high use" special function
registers from Bank 0 are mirrored in Bank 1 for code
reduction and quicker access.
4.2.1
GENERAL PURPOSE REGISTER FILE
The register file can be accessed either directly, or indirectly through the File Select Register FSR
(Section 4.5).
FIGURE 4-4:
PIC16C710/71 REGISTER FILE
MAP
File
Address
00h
01h
02h
03h
04h
05h
06h
07h
08h
09h
0Ah
0Bh
0Ch
File
Address
INDF(1)
TMR0
PCL
STATUS
FSR
PORTA
PORTB
ADCON0
ADRES
INDF(1)
OPTION
PCL
STATUS
FSR
TRISA
TRISB
PCON(2)
ADCON1
ADRES
PCLATH
INTCON
PCLATH
INTCON
General
Purpose
Register
General
Purpose
Register
80h
81h
82h
83h
84h
85h
86h
87h
88h
89h
8Ah
8Bh
8Ch
Mapped
in Bank 0(3)
2Fh
AFh
30h
B0h
7Fh
FFh
Bank 0
Bank 1
Unimplemented data memory locations, read
as '0'.
Note 1: Not a physical register.
2: The PCON register is not implemented on the
PIC16C71.
3: These locations are unimplemented in Bank 1.
Any access to these locations will access the
corresponding Bank 0 register.
DS30272A-page 12
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
FIGURE 4-5:
PIC16C711 REGISTER FILE
MAP
File
Address
00h
01h
02h
03h
04h
05h
06h
07h
08h
09h
0Ah
0Bh
0Ch
File
Address
INDF(1)
TMR0
PCL
STATUS
FSR
PORTA
PORTB
ADCON0
ADRES
INDF(1)
OPTION
PCL
STATUS
FSR
TRISA
TRISB
PCON
ADCON1
ADRES
PCLATH
INTCON
PCLATH
INTCON
General
Purpose
Register
General
Purpose
Register
80h
81h
82h
83h
84h
85h
86h
87h
88h
89h
8Ah
8Bh
8Ch
Mapped
in Bank 0(2)
4Fh
CFh
50h
D0h
7Fh
FFh
Bank 0
Bank 1
Unimplemented data memory locations, read
as '0'.
Note 1: Not a physical register.
2: These locations are unimplemented in Bank 1.
Any access to these locations will access the
corresponding Bank 0 register.
FIGURE 4-6:
PIC16C715 REGISTER FILE
MAP
File
Address
File
Address
00h
01h
02h
03h
04h
05h
06h
07h
08h
09h
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
1Ah
1Bh
1Ch
1Dh
1Eh
1Fh
20h
INDF(1)
TMR0
PCL
STATUS
FSR
PORTA
PORTB
INDF(1)
OPTION
PCL
STATUS
FSR
TRISA
TRISB
PCLATH
INTCON
PIR1
PCLATH
INTCON
PIE1
PCON
ADRES
ADCON0
General
Purpose
Register
ADCON1
General
Purpose
Register
80h
81h
82h
83h
84h
85h
86h
87h
88h
89h
8Ah
8Bh
8Ch
8Dh
8Eh
8Fh
90h
91h
92h
93h
94h
95h
96h
97h
98h
99h
9Ah
9Bh
9Ch
9Dh
9Eh
9Fh
A0h
BFh
C0h
7Fh
FFh
Bank 0
Bank 1
Unimplemented data memory locations, read
as '0'.
Note 1: Not a physical register.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 13
PIC16C71X
4.2.2
The special function registers can be classified into two
sets (core and peripheral). Those registers associated
with the “core” functions are described in this section,
and those related to the operation of the peripheral features are described in the section of that peripheral
feature.
SPECIAL FUNCTION REGISTERS
The Special Function Registers are registers used by
the CPU and Peripheral Modules for controlling the
desired operation of the device. These registers are
implemented as static RAM.
TABLE 4-1:
Address Name
PIC16C710/71/711 SPECIAL FUNCTION REGISTER SUMMARY
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR
Value on all
other resets
(1)
Bank 0
00h(3)
INDF
Addressing this location uses contents of FSR to address data memory (not a physical register)
0000 0000 0000 0000
01h
TMR0
Timer0 module’s register
xxxx xxxx uuuu uuuu
02h(3)
PCL
Program Counter's (PC) Least Significant Byte
0000 0000 0000 0000
03h(3)
STATUS
04h(3)
FSR
RP1(5)
RP0
TO
PD
Z
DC
C
Indirect data memory address pointer
05h
PORTA
06h
PORTB
07h
IRP(5)
—
—
—
—
xxxx xxxx uuuu uuuu
PORTA Data Latch when written: PORTA pins when read
PORTB Data Latch when written: PORTB pins when read
---x 0000 ---u 0000
xxxx xxxx uuuu uuuu
Unimplemented
ADCS1
0001 1xxx 000q quuu
—
08h
ADCON0
ADCS0
(6)
09h(3)
ADRES
0Ah(2,3)
PCLATH
—
—
—
0Bh(3)
INTCON
GIE
ADIE
T0IE
CHS1
CHS0
GO/DONE
ADIF
ADON
—
00-0 0000 00-0 0000
xxxx xxxx uuuu uuuu
A/D Result Register
Write Buffer for the upper 5 bits of the Program Counter
INTE
RBIE
T0IF
INTF
---0 0000 ---0 0000
RBIF
0000 000x 0000 000u
Addressing this location uses contents of FSR to address data memory (not a physical register)
0000 0000 0000 0000
Bank 1
80h(3)
INDF
81h
OPTION
82h
(3)
PCL
(3)
STATUS
(3)
FSR
83h
84h
85h
TRISA
86h
TRISB
RBPU
INTEDG
T0CS
T0SE
PSA
PS2
PS1
PS0
Program Counter's (PC) Least Significant Byte
IRP(5)
(5)
RP1
RP0
TO
0000 0000 0000 0000
PD
Z
DC
C
Indirect data memory address pointer
—
—
—
1111 1111 1111 1111
0001 1xxx 000q quuu
xxxx xxxx uuuu uuuu
PORTA Data Direction Register
---1 1111 ---1 1111
PORTB Data Direction Control Register
1111 1111 1111 1111
87h(4)
PCON
—
—
—
—
—
—
POR
BOR
---- --qq ---- --uu
88h
ADCON1
—
—
—
—
—
—
PCFG1
PCFG0
---- --00 ---- --00
89h(3)
xxxx xxxx uuuu uuuu
A/D Result Register
PCLATH
—
—
—
(3)
INTCON
GIE
ADIE
T0IE
8Ah
8Bh
ADRES
(2,3)
Write Buffer for the upper 5 bits of the Program Counter
INTE
RBIE
T0IF
INTF
RBIF
---0 0000 ---0 0000
0000 000x
0000 000u
Legend: x = unknown, u = unchanged, q = value depends on condition, - = unimplemented read as '0'.
Shaded locations are unimplemented, read as ‘0’.
Note 1: Other (non power-up) resets include external reset through MCLR and Watchdog Timer Reset.
2: The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8> whose
contents are transferred to the upper byte of the program counter.
3: These registers can be addressed from either bank.
4: The PCON register is not physically implemented in the PIC16C71, read as ’0’.
5: The IRP and RP1 bits are reserved on the PIC16C710/71/711, always maintain these bits clear.
6: Bit5 of ADCON0 is a General Purpose R/W bit for the PIC16C710/711 only. For the PIC16C71, this bit is unimplemented,
read as '0'.
DS30272A-page 14
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
TABLE 4-2:
Address Name
PIC16C715 SPECIAL FUNCTION REGISTER SUMMARY
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR, PER
Value on all
other resets
(3)
Bank 0
00h(1)
INDF
Addressing this location uses contents of FSR to address data memory (not a physical register)
0000 0000 0000 0000
01h
TMR0
Timer0 module’s register
xxxx xxxx uuuu uuuu
02h(1)
PCL
Program Counter's (PC) Least Significant Byte
03h(1)
STATUS
04h(1)
FSR
05h
PORTA
06h
PORTB
IRP(4)
RP1(4)
RP0
TO
0000 0000 0000 0000
PD
Z
DC
C
0001 1xxx 000q quuu
PORTA Data Latch when written: PORTA pins when read
---x 0000 ---u 0000
Indirect data memory address pointer
—
—
—
xxxx xxxx uuuu uuuu
PORTB Data Latch when written: PORTB pins when read
xxxx xxxx uuuu uuuu
07h
—
Unimplemented
—
—
08h
—
Unimplemented
—
—
09h
—
Unimplemented
—
—
(1,2)
0Ah
PCLATH
—
—
—
0Bh(1)
INTCON
GIE
PEIE
T0IE
Write Buffer for the upper 5 bits of the Program Counter
INTE
RBIE
T0IF
INTF
RBIF
0000 000x 0000 000u
0Ch
PIR1
—
ADIF
—
—
—
—
—
—
-0-- ---- -0-- ----
---0 0000 ---0 0000
0Dh
—
Unimplemented
—
—
0Eh
—
Unimplemented
—
—
0Fh
—
Unimplemented
—
—
10h
—
Unimplemented
—
—
11h
—
Unimplemented
—
—
12h
—
Unimplemented
—
—
13h
—
Unimplemented
—
—
14h
—
Unimplemented
—
—
15h
—
Unimplemented
—
—
16h
—
Unimplemented
—
—
17h
—
Unimplemented
—
—
18h
—
Unimplemented
—
—
19h
—
Unimplemented
—
—
1Ah
—
Unimplemented
—
—
1Bh
—
Unimplemented
—
—
1Ch
—
Unimplemented
—
—
1Dh
—
Unimplemented
—
—
1Eh
ADRES
1Fh
ADCON0
A/D Result Register
ADCS1
ADCS0
xxxx xxxx uuuu uuuu
CHS2
CHS1
CHS0
GO/DONE
—
ADON
0000 00-0 0000 00-0
Legend: x = unknown, u = unchanged, q = value depends on condition, - = unimplemented read as '0'.
Shaded locations are unimplemented, read as ‘0’.
Note 1: These registers can be addressed from either bank.
2: The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8> whose
contents are transferred to the upper byte of the program counter.
3: Other (non power-up) resets include external reset through MCLR and Watchdog Timer Reset.
4: The IRP and RP1 bits are reserved on the PIC16C715, always maintain these bits clear.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 15
PIC16C71X
TABLE 4-2:
Address Name
PIC16C715 SPECIAL FUNCTION REGISTER SUMMARY (Cont.’d)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR, PER
Value on all
other resets
(3)
Bank 1
80h(1)
INDF
81h
OPTION
82h(1)
PCL
(1)
Addressing this location uses contents of FSR to address data memory (not a physical register)
RBPU
INTEDG
T0CS
T0SE
PSA
PS2
PS1
PS0
Program Counter's (PC) Least Significant Byte
83h
STATUS
84h(1)
FSR
(4)
IRP
(4)
RP1
RP0
TO
PD
Z
DC
C
0001 1xxx 000q quuu
xxxx xxxx uuuu uuuu
85h
TRISA
86h
TRISB
87h
—
Unimplemented
—
—
88h
—
Unimplemented
—
—
—
Unimplemented
—
—
89h
8Ah(1,2)
—
1111 1111 1111 1111
0000 0000 0000 0000
Indirect data memory address pointer
—
0000 0000 0000 0000
PORTA Data Direction Register
--11 1111 --11 1111
PORTB Data Direction Register
PCLATH
—
8Bh(1)
INTCON
8Ch
PIE1
1111 1111 1111 1111
—
—
Write Buffer for the upper 5 bits of the PC
GIE
PEIE
T0IE
INTE
RBIE
T0IF
INTF
RBIF
0000 000x 0000 000u
—
ADIE
—
—
—
—
—
—
-0-- ---- -0-- ----
—
—
—
PER
POR
BOR
u--- -1qq u--- -1uu
---0 0000 ---0 0000
8Dh
—
8Eh
PCON
8Fh
—
Unimplemented
—
—
90h
—
Unimplemented
—
—
91h
—
Unimplemented
—
—
92h
—
Unimplemented
—
—
93h
—
Unimplemented
—
—
94h
—
Unimplemented
—
—
95h
—
Unimplemented
—
—
96h
—
Unimplemented
—
—
97h
—
Unimplemented
—
—
98h
—
Unimplemented
—
—
99h
—
Unimplemented
—
—
9Ah
—
Unimplemented
—
—
9Bh
—
Unimplemented
—
—
9Ch
—
Unimplemented
—
—
9Dh
—
Unimplemented
—
—
9Eh
—
Unimplemented
—
—
---- --00
---- --00
9Fh
ADCON1
Unimplemented
MPEEN
—
—
—
—
—
—
—
—
PCFG1
PCFG0
—
Legend: x = unknown, u = unchanged, q = value depends on condition, - = unimplemented read as '0'.
Shaded locations are unimplemented, read as ‘0’.
Note 1: These registers can be addressed from either bank.
2: The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8> whose
contents are transferred to the upper byte of the program counter.
3: Other (non power-up) resets include external reset through MCLR and Watchdog Timer Reset.
4: The IRP and RP1 bits are reserved on the PIC16C715, always maintain these bits clear.
DS30272A-page 16
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
4.2.2.1
STATUS REGISTER
Applicable Devices
710 71 711 715
The STATUS register, shown in Figure 4-7, contains
the arithmetic status of the ALU, the RESET status and
the bank select bits for data memory.
The STATUS register can be the destination for any
instruction, as with any other register. If the STATUS
register is the destination for an instruction that affects
the Z, DC or C bits, then the write to these three bits is
disabled. These bits are set or cleared according to the
device logic. Furthermore, the TO and PD bits are not
writable. Therefore, the result of an instruction with the
STATUS register as destination may be different than
intended.
It is recommended, therefore, that only BCF, BSF,
SWAPF and MOVWF instructions are used to alter the
STATUS register because these instructions do not
affect the Z, C or DC bits from the STATUS register. For
other instructions, not affecting any status bits, see the
"Instruction Set Summary."
Note 1: For those devices that do not use bits IRP
and RP1 (STATUS<7:6>), maintain these
bits clear to ensure upward compatibility
with future products.
Note 2: The C and DC bits operate as a borrow
and digit borrow bit, respectively, in subtraction. See the SUBLW and SUBWF
instructions for examples.
For example, CLRF STATUS will clear the upper-three
bits and set the Z bit. This leaves the STATUS register
as 000u u1uu (where u = unchanged).
FIGURE 4-7:
R/W-0
IRP
bit7
bit 7:
STATUS REGISTER (ADDRESS 03h, 83h)
R/W-0
RP1
R/W-0
RP0
R-1
TO
R-1
PD
R/W-x
Z
R/W-x
DC
R/W-x
C
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
IRP: Register Bank Select bit (used for indirect addressing)
1 = Bank 2, 3 (100h - 1FFh)
0 = Bank 0, 1 (00h - FFh)
bit 6-5: RP1:RP0: Register Bank Select bits (used for direct addressing)
11 = Bank 3 (180h - 1FFh)
10 = Bank 2 (100h - 17Fh)
01 = Bank 1 (80h - FFh)
00 = Bank 0 (00h - 7Fh)
Each bank is 128 bytes
bit 4:
TO: Time-out bit
1 = After power-up, CLRWDT instruction, or SLEEP instruction
0 = A WDT time-out occurred
bit 3:
PD: Power-down bit
1 = After power-up or by the CLRWDT instruction
0 = By execution of the SLEEP instruction
bit 2:
Z: Zero bit
1 = The result of an arithmetic or logic operation is zero
0 = The result of an arithmetic or logic operation is not zero
bit 1:
DC: Digit carry/borrow bit (ADDWF, ADDLW,SUBLW,SUBWF instructions)(for borrow the polarity is reversed)
1 = A carry-out from the 4th low order bit of the result occurred
0 = No carry-out from the 4th low order bit of the result
bit 0:
C: Carry/borrow bit (ADDWF, ADDLW,SUBLW,SUBWF instructions)
1 = A carry-out from the most significant bit of the result occurred
0 = No carry-out from the most significant bit of the result occurred
Note: For borrow the polarity is reversed. A subtraction is executed by adding the two’s complement of
the second operand. For rotate (RRF, RLF) instructions, this bit is loaded with either the high or low order
bit of the source register.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 17
PIC16C71X
4.2.2.2
OPTION REGISTER
Applicable Devices
Note:
710 71 711 715
The OPTION register is a readable and writable register which contains various control bits to configure the
TMR0/WDT prescaler, the External INT Interrupt,
TMR0, and the weak pull-ups on PORTB.
FIGURE 4-8:
R/W-1
RBPU
bit7
To achieve a 1:1 prescaler assignment for
the TMR0 register, assign the prescaler to
the Watchdog Timer by setting bit PSA
(OPTION<3>).
OPTION REGISTER (ADDRESS 81h, 181h)
R/W-1
INTEDG
R/W-1
T0CS
R/W-1
T0SE
R/W-1
PSA
R/W-1
PS2
R/W-1
PS1
bit 7:
RBPU: PORTB Pull-up Enable bit
1 = PORTB pull-ups are disabled
0 = PORTB pull-ups are enabled by individual port latch values
bit 6:
INTEDG: Interrupt Edge Select bit
1 = Interrupt on rising edge of RB0/INT pin
0 = Interrupt on falling edge of RB0/INT pin
bit 5:
T0CS: TMR0 Clock Source Select bit
1 = Transition on RA4/T0CKI pin
0 = Internal instruction cycle clock (CLKOUT)
bit 4:
T0SE: TMR0 Source Edge Select bit
1 = Increment on high-to-low transition on RA4/T0CKI pin
0 = Increment on low-to-high transition on RA4/T0CKI pin
bit 3:
PSA: Prescaler Assignment bit
1 = Prescaler is assigned to the WDT
0 = Prescaler is assigned to the Timer0 module
R/W-1
PS0
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
bit 2-0: PS2:PS0: Prescaler Rate Select bits
Bit Value
TMR0 Rate
WDT Rate
000
001
010
011
100
101
110
111
1:2
1:4
1:8
1 : 16
1 : 32
1 : 64
1 : 128
1 : 256
1:1
1:2
1:4
1:8
1 : 16
1 : 32
1 : 64
1 : 128
DS30272A-page 18
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
4.2.2.3
INTCON REGISTER
Applicable Devices
Note:
710 71 711 715
The INTCON Register is a readable and writable register which contains various enable and flag bits for the
TMR0 register overflow, RB Port change and External
RB0/INT pin interrupts.
FIGURE 4-9:
R/W-0
GIE
bit7
Interrupt flag bits get set when an interrupt
condition occurs regardless of the state of
its corresponding enable bit or the global
enable bit, GIE (INTCON<7>).
INTCON REGISTER (ADDRESS 0Bh, 8Bh)
R/W-0
ADIE
R/W-0
T0IE
R/W-0
INTE
R/W-0
RBIE
R/W-0
T0IF
R/W-0
INTF
R/W-x
RBIF
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
bit 7:
GIE:(1) Global Interrupt Enable bit
1 = Enables all un-masked interrupts
0 = Disables all interrupts
bit 6:
ADIE: A/D Converter Interrupt Enable bit
1 = Enables A/D interrupt
0 = Disables A/D interrupt
bit 5:
T0IE: TMR0 Overflow Interrupt Enable bit
1 = Enables the TMR0 interrupt
0 = Disables the TMR0 interrupt
bit 4:
INTE: RB0/INT External Interrupt Enable bit
1 = Enables the RB0/INT external interrupt
0 = Disables the RB0/INT external interrupt
bit 3:
RBIE: RB Port Change Interrupt Enable bit
1 = Enables the RB port change interrupt
0 = Disables the RB port change interrupt
bit 2:
T0IF: TMR0 Overflow Interrupt Flag bit
1 = TMR0 register has overflowed (must be cleared in software)
0 = TMR0 register did not overflow
bit 1:
INTF: RB0/INT External Interrupt Flag bit
1 = The RB0/INT external interrupt occurred (must be cleared in software)
0 = The RB0/INT external interrupt did not occur
bit 0:
RBIF: RB Port Change Interrupt Flag bit
1 = At least one of the RB7:RB4 pins changed state (must be cleared in software)
0 = None of the RB7:RB4 pins have changed state
Note 1: For the PIC16C71, if an interrupt occurs while the GIE bit is being cleared, the GIE bit may be unintentionally re-enabled by the RETFIE instruction in the user’s Interrupt Service Routine. Refer to Section 8.5
for a detailed description.
Interrupt flag bits get set when an interrupt condition occurs regardless of the state of its corresponding enable bit or the
global enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to
enabling an interrupt.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 19
PIC16C71X
4.2.2.4
PIE1 REGISTER
Applicable Devices
Note:
710 71 711 715
Bit PEIE (INTCON<6>) must be set to
enable any peripheral interrupt.
This register contains the individual enable bits for the
Peripheral interrupts.
FIGURE 4-10: PIE1 REGISTER (ADDRESS 8Ch)
U-0
—
bit7
R/W-0
ADIE
U-0
—
U-0
—
U-0
—
bit 7:
Unimplemented: Read as '0'
bit 6:
ADIE: A/D Converter Interrupt Enable bit
1 = Enables the A/D interrupt
0 = Disables the A/D interrupt
U-0
—
U-0
—
U-0
—
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
bit 5-0: Unimplemented: Read as '0'
DS30272A-page 20
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
4.2.2.5
PIR1 REGISTER
Applicable Devices
Note:
710 71 711 715
This register contains the individual flag bits for the
Peripheral interrupts.
Interrupt flag bits get set when an interrupt
condition occurs regardless of the state of
its corresponding enable bit or the global
enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an
interrupt.
FIGURE 4-11: PIR1 REGISTER (ADDRESS 0Ch)
U-0
—
bit7
R/W-0
ADIF
U-0
—
U-0
—
U-0
—
bit 7:
Unimplemented: Read as '0'
bit 6:
ADIF: A/D Converter Interrupt Flag bit
1 = An A/D conversion completed
0 = The A/D conversion is not complete
U-0
—
U-0
—
U-0
—
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
bit 5-0: Unimplemented: Read as '0'
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 21
PIC16C71X
4.2.2.6
PCON REGISTER
Applicable Devices
Note:
710 71 711 715
The Power Control (PCON) register contains a flag bit
to allow differentiation between a Power-on Reset
(POR) to an external MCLR Reset or WDT Reset.
Those devices with brown-out detection circuitry contain an additional bit to differentiate a Brown-out Reset
(BOR) condition from a Power-on Reset condition. For
the PIC16C715 the PCON register also contains status
bits MPEEN and PER. MPEEN reflects the value of the
MPEEN bit in the configuration word. PER indicates a
parity error reset has occurred.
BOR is unknown on Power-on Reset. It
must then be set by the user and checked
on subsequent resets to see if BOR is
clear, indicating a brown-out has occurred.
The BOR status bit is a don't care and is
not necessarily predictable if the brown-out
circuit is disabled (by clearing the BODEN
bit in the Configuration word).
FIGURE 4-12: PCON REGISTER (ADDRESS 8Eh), PIC16C710/711
U-0
U-0
U-0
U-0
U-0
U-0
R/W-0
—
—
—
—
—
—
POR
bit7
R/W-q
BOR
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
bit 7-2: Unimplemented: Read as '0'
bit 1:
POR: Power-on Reset Status bit
1 = No Power-on Reset occurred
0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs)
bit 0:
BOR: Brown-out Reset Status bit
1 = No Brown-out Reset occurred
0 = A Brown-out Reset occurred (must be set in software after a Brown-out Reset occurs)
FIGURE 4-13: PCON REGISTER (ADDRESS 8Eh), PIC16C715
R-U
MPEEN
bit7
bit 7:
U-0
—
U-0
—
U-0
—
U-0
—
R/W-1
PER
R/W-0
POR
R/W-q
BOR(1)
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
MPEEN: Memory Parity Error Circuitry Status bit
Reflects the value of configuration word bit, MPEEN
bit 6-3: Unimplemented: Read as '0'
bit 2:
PER: Memory Parity Error Reset Status bit
1 = No Error occurred
0 = Program Memory Fetch Parity Error occurred (must be set in software after a Parity Error Reset)
bit 1:
POR: Power-on Reset Status bit
1 = No Power-on Reset occurred
0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs)
bit 0:
BOR: Brown-out Reset Status bit
1 = No Brown-out Reset occurred
0 = A Brown-out Reset occurred (must be set in software after a Brown-out Reset occurs)
DS30272A-page 22
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
4.3
PCL and PCLATH
4.3.2
The program counter (PC) is 13-bits wide. The low byte
comes from the PCL register, which is a readable and
writable register. The upper bits (PC<12:8>) are not
readable, but are indirectly writable through the
PCLATH register. On any reset, the upper bits of the
PC will be cleared. Figure 4-14 shows the two situations for the loading of the PC. The upper example in
the figure shows how the PC is loaded on a write to
PCL (PCLATH<4:0> → PCH). The lower example in the
figure shows how the PC is loaded during a CALL or
GOTO instruction (PCLATH<4:3> → PCH).
FIGURE 4-14: LOADING OF PC IN
DIFFERENT SITUATIONS
PCH
8
7
0
PC
5
8
PCLATH<4:0>
Instruction with
PCL as
Destination
ALU
PCLATH
PCH
12
11 10
PCL
8
GOTO, CALL
PCLATH<4:3>
11
Opcode <10:0>
PCLATH
4.3.1
The stack operates as a circular buffer. This means that
after the stack has been PUSHed eight times, the ninth
push overwrites the value that was stored from the first
push. The tenth push overwrites the second push (and
so on).
Note 2: There are no instructions/mnemonics
called PUSH or POP. These are actions
that occur from the execution of the CALL,
RETURN, RETLW, and RETFIE instructions, or the vectoring to an interrupt
address.
4.4
0
7
PC
2
The PIC16CXX family has an 8 level deep x 13-bit wide
hardware stack. The stack space is not part of either
program or data space and the stack pointer is not
readable or writable. The PC is PUSHed onto the stack
when a CALL instruction is executed or an interrupt
causes a branch. The stack is POPed in the event of a
RETURN, RETLW or a RETFIE instruction execution.
PCLATH is not affected by a PUSH or POP operation.
Note 1: There are no status bits to indicate stack
overflow or stack underflow conditions.
PCL
12
STACK
Program Memory Paging
The PIC16C71X devices ignore both paging bits
(PCLATH<4:3>, which are used to access program
memory when more than one page is available. The
use of PCLATH<4:3> as general purpose read/write
bits for the PIC16C71X is not recommended since this
may affect upward compatibility with future products.
COMPUTED GOTO
A computed GOTO is accomplished by adding an offset to the program counter (ADDWF PCL). When doing a
table read using a computed GOTO method, care
should be exercised if the table location crosses a PCL
memory boundary (each 256 byte block). Refer to the
application note “Implementing a Table Read" (AN556).
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 23
PIC16C71X
4.5
Example 4-1 shows the calling of a subroutine in
page 1 of the program memory. This example assumes
that PCLATH is saved and restored by the interrupt service routine (if interrupts are used).
EXAMPLE 4-1:
ORG 0x500
BSF
PCLATH,3
BCF
PCLATH,4
CALL
SUB1_P1
:
:
:
ORG 0x900
SUB1_P1:
:
:
RETURN
Indirect Addressing, INDF and FSR
Registers
The INDF register is not a physical register. Addressing
the INDF register will cause indirect addressing.
Indirect addressing is possible by using the INDF register. Any instruction using the INDF register actually
accesses the register pointed to by the File Select Register, FSR. Reading the INDF register itself indirectly
(FSR = '0') will read 00h. Writing to the INDF register
indirectly results in a no-operation (although status bits
may be affected). An effective 9-bit address is obtained
by concatenating the 8-bit FSR register and the IRP bit
(STATUS<7>), as shown in Figure 4-15. However, IRP
is not used in the PIC16C71X devices.
CALL OF A SUBROUTINE IN
PAGE 1 FROM PAGE 0
;Select page 1 (800h-FFFh)
;Only on >4K devices
;Call subroutine in
;page 1 (800h-FFFh)
;called subroutine
;page 1 (800h-FFFh)
A simple program to clear RAM locations 20h-2Fh
using indirect addressing is shown in Example 4-2.
;return to Call subroutine
;in page 0 (000h-7FFh)
EXAMPLE 4-2:
movlw
movwf
clrf
incf
btfss
goto
NEXT
INDIRECT ADDRESSING
0x20
FSR
INDF
FSR,F
FSR,4
NEXT
;initialize pointer
;to RAM
;clear INDF register
;inc pointer
;all done?
;no clear next
CONTINUE
:
FIGURE 4-15:
;yes continue
DIRECT/INDIRECT ADDRESSING
Direct Addressing
Indirect Addressing
from opcode
RP1:RP0
6
bank select
location select
(1)
0
IRP
7
bank select
00
00h
01
80h
10
FSR register
0
location select
11
100h
180h
Not
Used
Data
Memory
7Fh
FFh
Bank 0
Bank 1
17Fh
Bank 2
1FFh
Bank 3
For register file map detail see Figure 4-4.
Note 1:
The RP1 and IRP bits are reserved, always maintain these bits clear.
DS30272A-page 24
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
5.0
I/O PORTS
Applicable Devices
FIGURE 5-1:
710 71 711 715
Some pins for these I/O ports are multiplexed with an
alternate function for the peripheral features on the
device. In general, when a peripheral is enabled, that
pin may not be used as a general purpose I/O pin.
5.1
BLOCK DIAGRAM OF
RA3:RA0 PINS
Data
bus
D
Q
VDD
WR
Port
Q
CK
Data Latch
PORTA is a 5-bit latch.
The RA4/T0CKI pin is a Schmitt Trigger input and an
open drain output. All other RA port pins have TTL
input levels and full CMOS output drivers. All pins have
data direction bits (TRIS registers) which can configure
these pins as output or input.
D
WR
TRIS
TRIS Latch
Pin RA4 is multiplexed with the Timer0 module clock
input to become the RA4/T0CKI pin.
To A/D Converter
On a Power-on Reset, these pins are configured as analog inputs and read as '0'.
The TRISA register controls the direction of the RA
pins, even when they are being used as analog inputs.
The user must ensure the bits in the TRISA register are
maintained set when using them as analog inputs.
EXAMPLE 5-1:
STATUS, RP0
PORTA
BSF
MOVLW
STATUS, RP0
0xCF
MOVWF
TRISA
Q
;
;
;
;
;
;
;
;
;
;
;
;
Initialize PORTA by
clearing output
data latches
Select Bank 1
Value used to
initialize data
direction
Set RA<3:0> as inputs
RA<4> as outputs
TRISA<7:5> are always
read as '0'.
D
EN
Note 1: I/O pins have protection diodes to VDD and
VSS.
FIGURE 5-2:
Data
bus
WR
PORT
BLOCK DIAGRAM OF RA4/
T0CKI PIN
D
Q
CK
Q
N
I/O pin(1)
Data Latch
INITIALIZING PORTA
BCF
CLRF
TTL
input
buffer
RD TRIS
RD PORT
I/O pin(1)
VSS
Analog
input
mode
Q
CK
Reading the PORTA register reads the status of the
pins whereas writing to it will write to the port latch. All
write operations are read-modify-write operations.
Therefore a write to a port implies that the port pins are
read, this value is modified, and then written to the port
data latch.
Other PORTA pins are multiplexed with analog inputs
and analog VREF input. The operation of each pin is
selected by clearing/setting the control bits in the
ADCON1 register (A/D Control Register1).
N
Q
Setting a TRISA register bit puts the corresponding output driver in a hi-impedance mode. Clearing a bit in the
TRISA register puts the contents of the output latch on
the selected pin(s).
Note:
P
PORTA and TRISA Registers
WR
TRIS
D
Q
CK
Q
VSS
Schmitt
Trigger
input
buffer
TRIS Latch
RD TRIS
Q
D
EN
EN
RD PORT
TMR0 clock input
Note 1: I/O pin has protection diodes to VSS only.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 25
PIC16C71X
TABLE 5-1:
PORTA FUNCTIONS
Name
Bit#
Buffer
RA0/AN0
RA1/AN1
RA2/AN2
RA3/AN3/VREF
RA4/T0CKI
bit0
bit1
bit2
bit3
bit4
TTL
TTL
TTL
TTL
ST
Function
Input/output or analog input
Input/output or analog input
Input/output or analog input
Input/output or analog input/VREF
Input/output or external clock input for Timer0
Output is open drain type
Legend: TTL = TTL input, ST = Schmitt Trigger input
TABLE 5-2:
SUMMARY OF REGISTERS ASSOCIATED WITH PORTA
Address Name
05h
Bit 7 Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR
Value on all
other resets
RA4
RA3
RA2
RA1
RA0
---x 0000
---u 0000
---1 1111
---1 1111
PCFG1
PCFG0
---- --00
---- --00
PORTA
—
—
—
85h
TRISA
—
—
—
9Fh
ADCON1
—
—
—
PORTA Data Direction Register
—
—
—
Legend: x = unknown, u = unchanged, - = unimplemented locations read as '0'. Shaded cells are not used by PORTA.
DS30272A-page 26
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
5.2
PORTB and TRISB Registers
PORTB is an 8-bit wide bi-directional port. The corresponding data direction register is TRISB. Setting a bit
in the TRISB register puts the corresponding output
driver in a hi-impedance input mode. Clearing a bit in
the TRISB register puts the contents of the output latch
on the selected pin(s).
EXAMPLE 5-2:
INITIALIZING PORTB
BCF
CLRF
STATUS, RP0
PORTB
BSF
MOVLW
STATUS, RP0
0xCF
MOVWF
TRISB
;
;
;
;
;
;
;
;
;
;
;
Initialize PORTB by
clearing output
data latches
Select Bank 1
Value used to
initialize data
direction
Set RB<3:0> as inputs
RB<5:4> as outputs
RB<7:6> as inputs
Each of the PORTB pins has a weak internal pull-up. A
single control bit can turn on all the pull-ups. This is
performed by clearing bit RBPU (OPTION<7>). The
weak pull-up is automatically turned off when the port
pin is configured as an output. The pull-ups are disabled on a Power-on Reset.
FIGURE 5-3:
BLOCK DIAGRAM OF
RB3:RB0 PINS
Data bus
WR Port
weak
P pull-up
Data Latch
D
Q
I/O
pin(1)
CK
TRIS Latch
D
Q
WR TRIS
This interrupt can wake the device from SLEEP. The
user, in the interrupt service routine, can clear the interrupt in the following manner:
a)
b)
Any read or write of PORTB. This will end the
mismatch condition.
Clear flag bit RBIF.
A mismatch condition will continue to set flag bit RBIF.
Reading PORTB will end the mismatch condition, and
allow flag bit RBIF to be cleared.
This interrupt on mismatch feature, together with software configurable pull-ups on these four pins allow
easy interface to a keypad and make it possible for
wake-up on key-depression. Refer to the Embedded
Control Handbook, "Implementing Wake-Up on Key
Stroke" (AN552).
Note:
VDD
RBPU(2)
Four of PORTB’s pins, RB7:RB4, have an interrupt on
change feature. Only pins configured as inputs can
cause this interrupt to occur (i.e. any RB7:RB4 pin configured as an output is excluded from the interrupt on
change comparison). The input pins (of RB7:RB4) are
compared with the old value latched on the last read of
PORTB. The “mismatch” outputs of RB7:RB4 are
OR’ed together to generate the RB Port Change Interrupt with flag bit RBIF (INTCON<0>).
For the PIC16C71
if a change on the I/O pin should occur
when the read operation is being executed
(start of the Q2 cycle), then interrupt flag bit
RBIF may not get set.
The interrupt on change feature is recommended for
wake-up on key depression operation and operations
where PORTB is only used for the interrupt on change
feature. Polling of PORTB is not recommended while
using the interrupt on change feature.
TTL
Input
Buffer
CK
RD TRIS
Q
RD Port
D
EN
RB0/INT
Schmitt Trigger
Buffer
RD Port
Note 1: I/O pins have diode protection to VDD and VSS.
2: TRISB = ’1’ enables weak pull-up if
RBPU = ’0’ (OPTION<7>).
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 27
PIC16C71X
FIGURE 5-4:
BLOCK DIAGRAM OF
RB7:RB4 PINS
(PIC16C71)
FIGURE 5-5:
BLOCK DIAGRAM OF
RB7:RB4 PINS
(PIC16C710/711/715)
VDD
RBPU(2)
VDD
weak
P pull-up
Data Latch
D
Q
Data bus
WR Port
RBPU(2)
Data bus
I/O
pin(1)
CK
WR Port
TRIS Latch
D
Q
WR TRIS
weak
P pull-up
Data Latch
D
Q
I/O
pin(1)
CK
TRIS Latch
D
Q
TTL
Input
Buffer
CK
RD TRIS
Q
WR TRIS
ST
Buffer
RD TRIS
Latch
D
Q
EN
RD Port
TTL
Input
Buffer
CK
Latch
D
EN
RD Port
Set RBIF
ST
Buffer
Q1
Set RBIF
From other
RB7:RB4 pins
Q
D
From other
RB7:RB4 pins
Q
D
RD Port
EN
EN
RD Port
RB7:RB6 in serial programming mode
RB7:RB6 in serial programming mode
Note 1: I/O pins have diode protection to VDD and VSS.
2: TRISB = ’1’ enables weak pull-up if
RBPU = ’0’ (OPTION<7>).
Note 1: I/O pins have diode protection to VDD and VSS.
2: TRISB = ’1’ enables weak pull-up if
RBPU = ’0’ (OPTION<7>).
TABLE 5-3:
Name
Q3
PORTB FUNCTIONS
Bit#
Buffer
Function
TTL/ST(1)
Input/output pin or external interrupt input. Internal software
programmable weak pull-up.
RB1
bit1
TTL
Input/output pin. Internal software programmable weak pull-up.
RB2
bit2
TTL
Input/output pin. Internal software programmable weak pull-up.
RB3
bit3
TTL
Input/output pin. Internal software programmable weak pull-up.
RB4
bit4
TTL
Input/output pin (with interrupt on change). Internal software programmable
weak pull-up.
RB5
bit5
TTL
Input/output pin (with interrupt on change). Internal software programmable
weak pull-up.
RB6
bit6
TTL/ST(2)
Input/output pin (with interrupt on change). Internal software programmable
weak pull-up. Serial programming clock.
RB7
bit7
TTL/ST(2)
Input/output pin (with interrupt on change). Internal software programmable
weak pull-up. Serial programming data.
Legend: TTL = TTL input, ST = Schmitt Trigger input
Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt.
2: This buffer is a Schmitt Trigger input when used in serial programming mode.
RB0/INT
bit0
DS30272A-page 28
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
TABLE 5-4:
SUMMARY OF REGISTERS ASSOCIATED WITH PORTB
Address
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR
Value on all
other resets
06h, 106h
PORTB
RB7
RB6
RB5
RB4
RB3
RB2
RB1
RB0
xxxx xxxx
uuuu uuuu
86h, 186h
TRISB
1111 1111
1111 1111
81h, 181h
OPTION
1111 1111
1111 1111
PORTB Data Direction Register
RBPU
INTEDG
T0CS
T0SE
PSA
PS2
PS1
PS0
Legend: x = unknown, u = unchanged. Shaded cells are not used by PORTB.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 29
PIC16C71X
5.3
I/O Programming Considerations
5.3.1
BI-DIRECTIONAL I/O PORTS
EXAMPLE 5-3:
Any instruction which writes, operates internally as a
read followed by a write operation. The BCF and BSF
instructions, for example, read the register into the
CPU, execute the bit operation and write the result
back to the register. Caution must be used when these
instructions are applied to a port with both inputs and
outputs defined. For example, a BSF operation on bit5
of PORTB will cause all eight bits of PORTB to be read
into the CPU. Then the BSF operation takes place on
bit5 and PORTB is written to the output latches. If
another bit of PORTB is used as a bi-directional I/O pin
(e.g., bit0) and it is defined as an input at this time, the
input signal present on the pin itself would be read into
the CPU and rewritten to the data latch of this particular
pin, overwriting the previous content. As long as the pin
stays in the input mode, no problem occurs. However,
if bit0 is switched to an output, the content of the data
latch may now be unknown.
Reading the port register, reads the values of the port
pins. Writing to the port register writes the value to the
port latch. When using read-modify-write instructions
(ex. BCF, BSF, etc.) on a port, the value of the port pins
is read, the desired operation is done to this value, and
this value is then written to the port latch.
Example 5-3 shows the effect of two sequential readmodify-write instructions on an I/O port.
FIGURE 5-6:
;Initial PORT settings: PORTB<7:4> Inputs
;
PORTB<3:0> Outputs
;PORTB<7:6> have external pull-ups and are
;not connected to other circuitry
;
;
PORT latch PORT pins
;
---------- --------BCF PORTB, 7
; 01pp pppp
11pp pppp
BCF PORTB, 6
; 10pp pppp
11pp pppp
BSF STATUS, RP0 ;
BCF TRISB, 7
; 10pp pppp
11pp pppp
BCF TRISB, 6
; 10pp pppp
10pp pppp
;
;Note that the user may have expected the
;pin values to be 00pp ppp. The 2nd BCF
;caused RB7 to be latched as the pin value
;(high).
A pin actively outputting a Low or High should not be
driven from external devices at the same time in order
to change the level on this pin (“wired-or”, “wired-and”).
The resulting high output currents may damage the
chip.
5.3.2
SUCCESSIVE OPERATIONS ON I/O PORTS
The actual write to an I/O port happens at the end of an
instruction cycle, whereas for reading, the data must be
valid at the beginning of the instruction cycle
(Figure 5-6). Therefore, care must be exercised if a
write followed by a read operation is carried out on the
same I/O port. The sequence of instructions should be
such to allow the pin voltage to stabilize (load dependent) before the next instruction which causes that file
to be read into the CPU is executed. Otherwise, the
previous state of that pin may be read into the CPU
rather than the new state. When in doubt, it is better to
separate these instructions with a NOP or another
instruction not accessing this I/O port.
SUCCESSIVE I/O OPERATION
Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4
PC
Instruction
fetched
READ-MODIFY-WRITE
INSTRUCTIONS ON AN I/O
PORT
PC
PC + 1
MOVWF PORTB MOVF PORTB,W
write to
PORTB
PC + 2
PC + 3
NOP
NOP
Note:
This example shows a write to PORTB
followed by a read from PORTB.
Note that:
data setup time = (0.25TCY - TPD)
RB7:RB0
where TCY = instruction cycle
TPD = propagation delay
Port pin
sampled here
TPD
Instruction
executed
NOP
MOVWF PORTB
write to
PORTB
DS30272A-page 30
Powered by ICminer.com Electronic-Library Service CopyRight 2003
MOVF PORTB,W
Therefore, at higher clock frequencies,
a write followed by a read may be
problematic.
1997 Microchip Technology Inc.
PIC16C71X
6.0
TIMER0 MODULE
Applicable Devices
bit T0SE selects the rising edge. Restrictions on the
external clock input are discussed in detail in
Section 6.2.
710 71 711 715
The Timer0 module timer/counter has the following features:
•
•
•
•
•
•
The prescaler is mutually exclusively shared between
the Timer0 module and the Watchdog Timer. The prescaler assignment is controlled in software by control bit
PSA (OPTION<3>). Clearing bit PSA will assign the
prescaler to the Timer0 module. The prescaler is not
readable or writable. When the prescaler is assigned to
the Timer0 module, prescale values of 1:2, 1:4, ...,
1:256 are selectable. Section 6.3 details the operation
of the prescaler.
8-bit timer/counter
Readable and writable
8-bit software programmable prescaler
Internal or external clock select
Interrupt on overflow from FFh to 00h
Edge select for external clock
Figure 6-1 is a simplified block diagram of the Timer0
module.
6.1
Timer mode is selected by clearing bit T0CS
(OPTION<5>). In timer mode, the Timer0 module will
increment every instruction cycle (without prescaler). If
the TMR0 register is written, the increment is inhibited
for the following two instruction cycles (Figure 6-2 and
Figure 6-3). The user can work around this by writing
an adjusted value to the TMR0 register.
Counter mode is selected by setting bit T0CS
(OPTION<5>). In counter mode, Timer0 will increment
either on every rising or falling edge of pin RA4/T0CKI.
The incrementing edge is determined by the Timer0
Source Edge Select bit T0SE (OPTION<4>). Clearing
FIGURE 6-1:
Timer0 Interrupt
The TMR0 interrupt is generated when the TMR0 register overflows from FFh to 00h. This overflow sets bit
T0IF (INTCON<2>). The interrupt can be masked by
clearing bit T0IE (INTCON<5>). Bit T0IF must be
cleared in software by the Timer0 module interrupt service routine before re-enabling this interrupt. The
TMR0 interrupt cannot awaken the processor from
SLEEP since the timer is shut off during SLEEP. See
Figure 6-4 for Timer0 interrupt timing.
TIMER0 BLOCK DIAGRAM
Data bus
FOSC/4
0
PSout
1
Sync with
Internal
clocks
1
Programmable
Prescaler
RA4/T0CKI
pin
8
0
TMR0
PSout
(2 cycle delay)
T0SE
3
Set interrupt
flag bit T0IF
on overflow
PSA
PS2, PS1, PS0
T0CS
Note 1: T0CS, T0SE, PSA, PS2:PS0 (OPTION<5:0>).
2: The prescaler is shared with Watchdog Timer (refer to Figure 6-6 for detailed block diagram).
FIGURE 6-2:
PC
(Program
Counter)
TIMER0 TIMING: INTERNAL CLOCK/NO PRESCALE
Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4
PC-1
Instruction
Fetch
TMR0
T0
PC
PC+1
MOVWF TMR0
MOVF TMR0,W
T0+1
Instruction
Executed
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
PC+2
MOVF TMR0,W
PC+3
MOVF TMR0,W
T0+2
NT0
NT0
Write TMR0
executed
Read TMR0
reads NT0
Read TMR0
reads NT0
PC+4
MOVF TMR0,W
NT0
Read TMR0
reads NT0
PC+5
PC+6
MOVF TMR0,W
NT0+1
Read TMR0
reads NT0 + 1
NT0+2
T0
Read TMR0
reads NT0 + 2
DS30272A-page 31
PIC16C71X
FIGURE 6-3:
TIMER0 TIMING: INTERNAL CLOCK/PRESCALE 1:2
Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4
PC
(Program
Counter)
PC-1
Instruction
Fetch
PC
PC+1
MOVWF TMR0
MOVF TMR0,W
PC+3
Instruction
Execute
PC+5
MOVF TMR0,W
PC+6
MOVF TMR0,W
Read TMR0
reads NT0
Read TMR0
reads NT0
PC+6
NT0+1
NT0
Write TMR0
executed
FIGURE 6-4:
PC+4
MOVF TMR0,W
T0+1
T0
TMR0
PC+2
MOVF TMR0,W
Read TMR0
reads NT0
Read TMR0
reads NT0
Read TMR0
reads NT0 + 1
TIMER0 INTERRUPT TIMING
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
OSC1
CLKOUT(3)
Timer0
FEh
T0IF bit
(INTCON<2>)
FFh
00h
01h
02h
1
1
GIE bit
(INTCON<7>)
INSTRUCTION
FLOW
PC
PC
Instruction
fetched
Inst (PC)
Instruction
executed
Inst (PC-1)
PC +1
PC +1
Inst (PC+1)
Inst (PC)
Dummy cycle
0004h
0005h
Inst (0004h)
Inst (0005h)
Dummy cycle
Inst (0004h)
Note 1: Interrupt flag bit T0IF is sampled here (every Q1).
2: Interrupt latency = 4Tcy where Tcy = instruction cycle time.
3: CLKOUT is available only in RC oscillator mode.
DS30272A-page 32
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
6.2
Using Timer0 with an External Clock
caler so that the prescaler output is symmetrical. For
the external clock to meet the sampling requirement,
the ripple-counter must be taken into account. Therefore, it is necessary for T0CKI to have a period of at
least 4Tosc (and a small RC delay of 40 ns) divided by
the prescaler value. The only requirement on T0CKI
high and low time is that they do not violate the minimum pulse width requirement of 10 ns. Refer to parameters 40, 41 and 42 in the electrical specification of the
desired device.
When an external clock input is used for Timer0, it must
meet certain requirements. The requirements ensure
the external clock can be synchronized with the internal
phase clock (TOSC). Also, there is a delay in the actual
incrementing of Timer0 after synchronization.
6.2.1
EXTERNAL CLOCK SYNCHRONIZATION
When no prescaler is used, the external clock input is
the same as the prescaler output. The synchronization
of T0CKI with the internal phase clocks is accomplished by sampling the prescaler output on the Q2 and
Q4 cycles of the internal phase clocks (Figure 6-5).
Therefore, it is necessary for T0CKI to be high for at
least 2Tosc (and a small RC delay of 20 ns) and low for
at least 2Tosc (and a small RC delay of 20 ns). Refer to
the electrical specification of the desired device.
6.2.2
TMR0 INCREMENT DELAY
Since the prescaler output is synchronized with the
internal clocks, there is a small delay from the time the
external clock edge occurs to the time the Timer0 module is actually incremented. Figure 6-5 shows the delay
from the external clock edge to the timer incrementing.
When a prescaler is used, the external clock input is
divided by the asynchronous ripple-counter type pres-
FIGURE 6-5:
TIMER0 TIMING WITH EXTERNAL CLOCK
Q1 Q2 Q3 Q4
Q1 Q2 Q3 Q4
Q1 Q2 Q3 Q4
External Clock Input or
Prescaler output (2)
Q1 Q2 Q3 Q4
Small pulse
misses sampling
(1)
(3)
External Clock/Prescaler
Output after sampling
Increment Timer0 (Q4)
Timer0
T0
T0 + 1
T0 + 2
Note 1: Delay from clock input change to Timer0 increment is 3Tosc to 7Tosc. (Duration of Q = Tosc).
Therefore, the error in measuring the interval between two edges on Timer0 input = ±4Tosc max.
2: External clock if no prescaler selected, Prescaler output otherwise.
3: The arrows indicate the points in time where sampling occurs.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 33
PIC16C71X
6.3
Prescaler
When assigned to the Timer0 module, all instructions
writing to the TMR0 register (e.g. CLRF 1, MOVWF 1,
BSF
1,x....etc.) will clear the prescaler. When
assigned to WDT, a CLRWDT instruction will clear the
prescaler along with the Watchdog Timer. The prescaler is not readable or writable.
An 8-bit counter is available as a prescaler for the
Timer0 module, or as a postscaler for the Watchdog
Timer, respectively (Figure 6-6). For simplicity, this
counter is being referred to as “prescaler” throughout
this data sheet. Note that there is only one prescaler
available which is mutually exclusively shared between
the Timer0 module and the Watchdog Timer. Thus, a
prescaler assignment for the Timer0 module means
that there is no prescaler for the Watchdog Timer, and
vice-versa.
Note:
Writing to TMR0 when the prescaler is
assigned to Timer0 will clear the prescaler
count, but will not change the prescaler
assignment.
The PSA and PS2:PS0 bits (OPTION<3:0>) determine
the prescaler assignment and prescale ratio.
FIGURE 6-6:
BLOCK DIAGRAM OF THE TIMER0/WDT PRESCALER
Data Bus
CLKOUT (=Fosc/4)
0
RA4/T0CKI
pin
8
M
U
X
1
M
U
X
0
1
SYNC
2
Cycles
TMR0 reg
T0SE
T0CS
0
Watchdog
Timer
1
M
U
X
Set flag bit T0IF
on Overflow
PSA
8-bit Prescaler
8
8 - to - 1MUX
PS2:PS0
PSA
WDT Enable bit
1
0
MUX
PSA
WDT
Time-out
Note: T0CS, T0SE, PSA, PS2:PS0 are (OPTION<5:0>).
DS30272A-page 34
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
6.3.1
SWITCHING PRESCALER ASSIGNMENT
Note:
The prescaler assignment is fully under software control, i.e., it can be changed “on the fly” during program
execution.
EXAMPLE 6-1:
BCF
CLRF
BSF
CLRWDT
MOVLW
MOVWF
BCF
To avoid an unintended device RESET, the
following instruction sequence (shown in
Example 6-1) must be executed when
changing the prescaler assignment from
Timer0 to the WDT. This sequence must be
followed even if the WDT is disabled.
CHANGING PRESCALER (TIMER0→WDT)
STATUS, RP0
TMR0
STATUS, RP0
b'xxxx1xxx'
OPTION_REG
STATUS, RP0
;Bank 0
;Clear TMR0 & Prescaler
;Bank 1
;Clears WDT
;Selects new prescale value
;and assigns the prescaler to the WDT
;Bank 0
To change prescaler from the WDT to the Timer0
module use the sequence shown in Example 6-2.
EXAMPLE 6-2:
CLRWDT
BSF
MOVLW
MOVWF
BCF
CHANGING PRESCALER (WDT→TIMER0)
STATUS, RP0
b'xxxx0xxx'
OPTION_REG
STATUS, RP0
TABLE 6-1:
;Clear WDT and prescaler
;Bank 1
;Select TMR0, new prescale value and
;clock source
;Bank 0
REGISTERS ASSOCIATED WITH TIMER0
Address
Name
Bit 7
Bit 6
01h
TMR0
0Bh,8Bh,
INTCON
81h
OPTION RBPU INTEDG
85h
TRISA
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Timer0 module’s register
GIE
—
ADIE
—
Value on:
POR,
BOR
Value on all
other resets
xxxx xxxx
uuuu uuuu
T0IE
INTE
RBIE
T0IF
INTF
RBIF
0000 000x
0000 000u
T0CS
T0SE
PSA
PS2
PS1
PS0
1111 1111
1111 1111
---1 1111
---1 1111
—
PORTA Data Direction Register
Legend: x = unknown, u = unchanged, - = unimplemented locations read as '0'. Shaded cells are not used by Timer0.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 35
PIC16C71X
NOTES:
DS30272A-page 36
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
7.0
ANALOG-TO-DIGITAL
CONVERTER (A/D) MODULE
Applicable Devices
The A/D converter has a unique feature of being able
to operate while the device is in SLEEP mode. To operate in sleep, the A/D conversion clock must be derived
from the A/D’s internal RC oscillator.
710 71 711 715
The A/D module has three registers. These registers
are:
The analog-to-digital (A/D) converter module has four
analog inputs.
• A/D Result Register (ADRES)
• A/D Control Register 0 (ADCON0)
• A/D Control Register 1 (ADCON1)
The A/D allows conversion of an analog input signal to
a corresponding 8-bit digital number (refer to Application Note AN546 for use of A/D Converter). The output
of the sample and hold is the input into the converter,
which generates the result via successive approximation. The analog reference voltage is software selectable to either the device’s positive supply voltage (VDD)
or the voltage level on the RA3/AN3/VREF pin.
FIGURE 7-1:
The ADCON0 register, shown in Figure 7-1 and
Figure 7-2, controls the operation of the A/D module.
The ADCON1 register, shown in Figure 7-3 configures
the functions of the port pins. The port pins can be configured as analog inputs (RA3 can also be a voltage reference) or as digital I/O.
ADCON0 REGISTER (ADDRESS 08h), PIC16C710/71/711
R/W-0 R/W-0
ADCS1 ADCS0
U-0
— (1)
R/W-0
CHS1
R/W-0
CHS0
R/W-0
GO/DONE
bit7
R/W-0
ADIF
R/W-0
ADON
bit0
R = Readable bit
W = Writable bit
U = Unimplemented
bit, read as ‘0’
- n =Value at POR reset
bit 7-6: ADCS1:ADCS0: A/D Conversion Clock Select bits
00 = FOSC/2
01 = FOSC/8
10 = FOSC/32
11 = FRC (clock derived from an RC oscillation)
bit 5:
Unimplemented: Read as '0'.
bit 4-3: CHS1:CHS0: Analog Channel Select bits
00 = channel 0, (RA0/AN0)
01 = channel 1, (RA1/AN1)
10 = channel 2, (RA2/AN2)
11 = channel 3, (RA3/AN3)
bit 2:
GO/DONE: A/D Conversion Status bit
If ADON = 1:
1 = A/D conversion in progress (setting this bit starts the A/D conversion)
0 = A/D conversion not in progress (This bit is automatically cleared by hardware when the A/D conversion is complete)
bit 1:
ADIF: A/D Conversion Complete Interrupt Flag bit
1 = conversion is complete (must be cleared in software)
0 = conversion is not complete
bit 0:
ADON: A/D On bit
1 = A/D converter module is operating
0 = A/D converter module is shutoff and consumes no operating current
Note 1: Bit5 of ADCON0 is a General Purpose R/W bit for the PIC16C710/711 only. For the PIC16C71, this bit is
unimplemented, read as '0'.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 37
PIC16C71X
FIGURE 7-2:
ADCON0 REGISTER (ADDRESS 1Fh), PIC16C715
R/W-0 R/W-0
ADCS1 ADCS0
bit7
R/W-0
—
R/W-0
CHS1
R/W-0
CHS0
R/W-0
GO/DONE
U-0
—
R/W-0
ADON
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
read as ‘0’
- n = Value at POR reset
bit 7-6: ADCS1:ADCS0: A/D Conversion Clock Select bits
00 = FOSC/2
01 = FOSC/8
10 = FOSC/32
11 = FRC (clock derived from an RC oscillation)
bit 5:
Unused
bit 6-3: CHS1:CHS0: Analog Channel Select bits
000 = channel 0, (RA0/AN0)
001 = channel 1, (RA1/AN1)
010 = channel 2, (RA2/AN2)
011 = channel 3, (RA3/AN3)
100 = channel 0, (RA0/AN0)
101 = channel 1, (RA1/AN1)
110 = channel 2, (RA2/AN2)
111 = channel 3, (RA3/AN3)
bit 2:
GO/DONE: A/D Conversion Status bit
If ADON = 1
1 = A/D conversion in progress (setting this bit starts the A/D conversion)
0 = A/D conversion not in progress (This bit is automatically cleared by hardware when the A/D conversion is complete)
bit 1:
Unimplemented: Read as '0'
bit 0:
ADON: A/D On bit
1 = A/D converter module is operating
0 = A/D converter module is shutoff and consumes no operating current
FIGURE 7-3:
U-0
—
bit7
ADCON1 REGISTER, PIC16C710/71/711 (ADDRESS 88h),
PIC16C715 (ADDRESS 9Fh)
U-0
—
U-0
—
U-0
—
U-0
—
U-0
—
R/W-0
PCFG1
R/W-0
PCFG0
bit0
R = Readable bit
W = Writable bit
U = Unimplemented
bit, read as ‘0’
- n =Value at POR reset
bit 7-2: Unimplemented: Read as '0'
bit 1-0: PCFG1:PCFG0: A/D Port Configuration Control bits
PCFG1:PCFG0
00
01
10
11
RA1 & RA0
A
A
A
D
RA2
A
A
D
D
RA3
A
VREF
D
D
VREF
VDD
RA3
VDD
VDD
A = Analog input
D = Digital I/O
DS30272A-page 38
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
2.
The ADRES register contains the result of the A/D conversion. When the A/D conversion is complete, the
result is loaded into the ADRES register, the GO/DONE
bit (ADCON0<2>) is cleared, and A/D interrupt flag bit
ADIF is set. The block diagram of the A/D module is
shown in Figure 7-4.
3.
4.
After the A/D module has been configured as desired,
the selected channel must be acquired before the conversion is started. The analog input channels must
have their corresponding TRIS bits selected as an
input. To determine acquisition time, see Section 7.1.
After this acquisition time has elapsed the A/D conversion can be started. The following steps should be followed for doing an A/D conversion:
1.
5.
OR
6.
Configure the A/D module:
• Configure analog pins / voltage reference /
and digital I/O (ADCON1)
• Select A/D input channel (ADCON0)
• Select A/D conversion clock (ADCON0)
• Turn on A/D module (ADCON0)
FIGURE 7-4:
Configure A/D interrupt (if desired):
• Clear ADIF bit
• Set ADIE bit
• Set GIE bit
Wait the required acquisition time.
Start conversion:
• Set GO/DONE bit (ADCON0)
Wait for A/D conversion to complete, by either:
• Polling for the GO/DONE bit to be cleared
7.
• Waiting for the A/D interrupt
Read A/D Result register (ADRES), clear bit
ADIF if required.
For next conversion, go to step 1 or step 2 as
required. The A/D conversion time per bit is
defined as TAD. A minimum wait of 2TAD is
required before next acquisition starts.
A/D BLOCK DIAGRAM
CHS1:CHS0
11
VIN
RA3/AN3/VREF
10
(Input voltage)
RA2/AN2
01
A/D
Converter
RA1/AN1
00
RA0/AN0
VDD
00 or
10 or
11
VREF
(Reference
voltage)
01
PCFG1:PCFG0
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 39
PIC16C71X
7.1
A/D Acquisition Requirements
Note 1: The reference voltage (VREF) has no
effect on the equation, since it cancels
itself out.
For the A/D converter to meet its specified accuracy,
the charge holding capacitor (CHOLD) must be allowed
to fully charge to the input channel voltage level. The
analog input model is shown in Figure 7-5. The source
impedance (RS) and the internal sampling switch (RSS)
impedance directly affect the time required to charge
the capacitor CHOLD. The sampling switch (RSS)
impedance varies over the device voltage (VDD),
Figure 7-5. The source impedance affects the offset
voltage at the analog input (due to pin leakage current).
The maximum recommended impedance for analog sources is 10 kΩ. After the analog input channel is
selected (changed) this acquisition must be done
before the conversion can be started.
To calculate the minimum acquisition time, Equation 71 may be used. This equation calculates the acquisition
time to within 1/2 LSb error is used (512 steps for the
A/D). The 1/2 LSb error is the maximum error allowed
for the A/D to meet its specified accuracy.
EQUATION 7-1:
Note 2: The charge holding capacitor (CHOLD) is
not discharged after each conversion.
Note 3: The maximum recommended impedance
for analog sources is 10 kΩ. This is
required to meet the pin leakage specification.
Note 4: After a conversion has completed, a
2.0TAD delay must complete before acquisition can begin again. During this time the
holding capacitor is not connected to the
selected A/D input channel.
EXAMPLE 7-1:
CALCULATING THE
MINIMUM REQUIRED
AQUISITION TIME
TACQ = Amplifier Settling Time +
Holding Capacitor Charging Time +
A/D MINIMUM CHARGING
TIME
Temperature Coefficient
VHOLD = (VREF - (VREF/512)) • (1 - e(-TCAP/CHOLD(RIC + RSS + RS)))
TACQ = 5 µs + TCAP + [(Temp - 25°C)(0.05 µs/°C)]
Given: VHOLD = (VREF/512), for 1/2 LSb resolution
TCAP = -CHOLD (RIC + RSS + RS) ln(1/511)
The above equation reduces to:
-51.2 pF (1 kΩ + 7 kΩ + 10 kΩ) ln(0.0020)
TCAP = -(51.2 pF)(1 kΩ + RSS + RS) ln(1/511)
-51.2 pF (18 kΩ) ln(0.0020)
Example 7-1 shows the calculation of the minimum
required acquisition time TACQ. This calculation is
based on the following system assumptions.
-0.921 µs (-6.2364)
5.747 µs
TACQ = 5 µs + 5.747 µs + [(50°C - 25°C)(0.05 µs/°C)]
CHOLD = 51.2 pF
10.747 µs + 1.25 µs
Rs = 10 kΩ
11.997 µs
1/2 LSb error
VDD = 5V → Rss = 7 kΩ
Temp (application system max.) = 50°C
VHOLD = 0 @ t = 0
FIGURE 7-5:
ANALOG INPUT MODEL
VDD
Rs
ANx
CPIN
5 pF
VA
Sampling
Switch
VT = 0.6V
VT = 0.6V
RIC ≤ 1k
SS RSS
CHOLD
= DAC capacitance
= 51.2 pF
I leakage
± 500 nA
VSS
Legend CPIN
= input capacitance
VT
= threshold voltage
I leakage = leakage current at the pin due to
various junctions
RIC
SS
CHOLD
= interconnect resistance
= sampling switch
= sample/hold capacitance (from DAC)
DS30272A-page 40
Powered by ICminer.com Electronic-Library Service CopyRight 2003
6V
5V
VDD 4V
3V
2V
5 6 7 8 9 10 11
Sampling Switch
( kΩ )
1997 Microchip Technology Inc.
PIC16C71X
7.2
Selecting the A/D Conversion Clock
7.3
The A/D conversion time per bit is defined as TAD. The
A/D conversion requires 9.5TAD per 8-bit conversion.
The source of the A/D conversion clock is software
selectable. The four possible options for TAD are:
•
•
•
•
The ADCON1 and TRISA registers control the operation of the A/D port pins. The port pins that are desired
as analog inputs must have their corresponding TRIS
bits set (input). If the TRIS bit is cleared (output), the
digital output level (VOH or VOL) will be converted.
2TOSC
8TOSC
32TOSC
Internal RC oscillator
The A/D operation is independent of the state of the
CHS2:CHS0 bits and the TRIS bits.
Note 1: When reading the port register, all pins
configured as analog input channels will
read as cleared (a low level). Pins configured as digital inputs, will convert an analog input. Analog levels on a digitally
configured input will not affect the conversion accuracy.
For correct A/D conversions, the A/D conversion clock
(TAD) must be selected to ensure a minimum TAD time
of:
2.0 µs for the PIC16C71
1.6 µs for all other PIC16C71X devices
Note 2: Analog levels on any pin that is defined as
a digital input (including the AN7:AN0
pins), may cause the input buffer to consume current that is out of the devices
specification.
Table 7-1 and Table 7-2 and show the resultant TAD
times derived from the device operating frequencies
and the A/D clock source selected.
TABLE 7-1:
TAD vs. DEVICE OPERATING FREQUENCIES, PIC16C71
AD Clock Source (TAD)
Operation
Configuring Analog Port Pins
Device Frequency
ADCS1:ADCS0
20 MHz
16 MHz
4 MHz
1 MHz
333.33 kHz
00
100 ns(2)
125 ns(2)
6 µs
8TOSC
01
400
ns(2)
500 ns(2)
2.0 µs
2.0 µs
ns(2)
8.0 µs
24 µs(3)
32TOSC
10
1.6 µs(2)
8.0 µs
32.0 µs(3)
96 µs(3)
2TOSC
RC(5)
5:
2-6
2-6
2-6
2 - 6 µs(1)
2 - 6 µs
Shaded cells are outside of recommended range.
The RC source has a typical TAD time of 4 µs.
These values violate the minimum required TAD time.
For faster conversion times, the selection of another clock source is recommended.
When device frequency is greater than 1 MHz, the RC A/D conversion clock source is recommended for
sleep operation only.
For extended voltage devices (LC), please refer to Electrical Specifications section.
TABLE 7-2:
µs(1,4)
(1,4)
11
Legend:
Note 1:
2:
3:
4:
500
2.0 µs
ADCS1:ADCS0
Device Frequency
20 MHz
2TOSC
00
100
8TOSC
01
400 ns(2)
1.6 µs
32TOSC
µs(1)
TAD vs. DEVICE OPERATING FREQUENCIES, PIC16C710/711, PIC16C715
AD Clock Source (TAD)
Operation
µs(1,4)
10
ns(2)
5 MHz
1.25 MHz
333.33 kHz
400
1.6 µs
1.6 µs
6 µs
6.4 µs
24 µs(3)
6.4 µs
25.6 µs
96 µs(3)
ns(2)
(3)
2 - 6 µs(1,4)
2 - 6 µs(1,4)
2 - 6 µs(1)
2 - 6 µs(1,4)
Shaded cells are outside of recommended range.
The RC source has a typical TAD time of 4 µs.
These values violate the minimum required TAD time.
For faster conversion times, the selection of another clock source is recommended.
When device frequency is greater than 1 MHz, the RC A/D conversion clock source is recommended for
sleep operation only.
5: For extended voltage devices (LC), please refer to Electrical Specifications section.
RC(5)
Legend:
Note 1:
2:
3:
4:
11
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 41
PIC16C71X
7.4
A/D Conversions
Example 7-2 shows how to perform an A/D conversion.
The RA pins are configured as analog inputs. The analog reference (VREF) is the device VDD. The A/D interrupt is enabled, and the A/D conversion clock is FRC.
The conversion is performed on the RA0 pin (channel
0).
EXAMPLE 7-2:
BSF
CLRF
BCF
MOVLW
MOVWF
BSF
BSF
;
;
;
;
Note:
The GO/DONE bit should NOT be set in
the same instruction that turns on the A/D.
Clearing the GO/DONE bit during a conversion will
abort the current conversion. The ADRES register will
NOT be updated with the partially completed A/D conversion sample. That is, the ADRES register will continue to contain the value of the last completed
conversion (or the last value written to the ADRES register). After the A/D conversion is aborted, a 2TAD wait
is required before the next acquisition is started. After
this 2TAD wait, an acquisition is automatically started
on the selected channel.
A/D CONVERSION
STATUS,
ADCON1
STATUS,
0xC1
ADCON0
INTCON,
INTCON,
RP0
RP0
ADIE
GIE
;
;
;
;
;
;
;
Select Bank 1
Configure A/D inputs
Select Bank 0
RC Clock, A/D is on, Channel 0 is selected
Enable A/D Interrupt
Enable all interrupts
Ensure that the required sampling time for the selected input channel has elapsed.
Then the conversion may be started.
BSF
:
:
ADCON0, GO
; Start A/D Conversion
; The ADIF bit will be set and the GO/DONE bit
; is cleared upon completion of the A/D Conversion.
DS30272A-page 42
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
7.4.1
FASTER CONVERSION - LOWER
RESOLUTION TRADE-OFF
Not all applications require a result with 8-bits of resolution, but may instead require a faster conversion time.
The A/D module allows users to make the trade-off of
conversion speed to resolution. Regardless of the resolution required, the acquisition time is the same. To
speed up the conversion, the clock source of the A/D
module may be switched so that the TAD time violates
the minimum specified time (see the applicable electrical specification). Once the TAD time violates the minimum specified time, all the following A/D result bits are
not valid (see A/D Conversion Timing in the Electrical
Specifications section.) The clock sources may only be
switched between the three oscillator versions (cannot
be switched from/to RC). The equation to determine
the time before the oscillator can be switched is as
follows:
Since the TAD is based from the device oscillator, the
user must use some method (a timer, software loop,
etc.) to determine when the A/D oscillator may be
changed. Example 7-3 shows a comparison of time
required for a conversion with 4-bits of resolution, versus the 8-bit resolution conversion. The example is for
devices operating at 20 MHz and 16 MHz (The A/D
clock is programmed for 32TOSC), and assumes that
immediately after 6TAD, the A/D clock is programmed
for 2TOSC.
The 2TOSC violates the minimum TAD time since the
last 4-bits will not be converted to correct values.
Conversion time = 2TAD + N • TAD + (8 - N)(2TOSC)
Where: N = number of bits of resolution required.
EXAMPLE 7-3:
4-BIT vs. 8-BIT CONVERSION TIMES
Freq. (MHz)(1)
TAD
TOSC
2TAD + N • TAD + (8 - N)(2TOSC)
20
16
20
16
20
16
Resolution
4-bit
8-bit
1.6 µs
2.0 µs
50 ns
62.5 ns
10 µs
12.5 µs
1.6 µs
2.0 µs
50 ns
62.5 ns
16 µs
20 µs
Note 1: The PIC16C71 has a minimum TAD time of 2.0 µs.
All other PIC16C71X devices have a minimum TAD time of 1.6 µs.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 43
PIC16C71X
7.5
A/D Operation During Sleep
The A/D module can operate during SLEEP mode. This
requires that the A/D clock source be set to RC
(ADCS1:ADCS0 = 11). When the RC clock source is
selected, the A/D module waits one instruction cycle
before starting the conversion. This allows the SLEEP
instruction to be executed, which eliminates all digital
switching noise from the conversion. When the conversion is completed the GO/DONE bit will be cleared, and
the result loaded into the ADRES register. If the A/D
interrupt is enabled, the device will wake-up from
SLEEP. If the A/D interrupt is not enabled, the A/D module will then be turned off, although the ADON bit will
remain set.
When the A/D clock source is another clock option (not
RC), a SLEEP instruction will cause the present conversion to be aborted and the A/D module to be turned off,
though the ADON bit will remain set.
Turning off the A/D places the A/D module in its lowest
current consumption state.
Note:
7.6
For the A/D module to operate in SLEEP,
the A/D clock source must be set to RC
(ADCS1:ADCS0 = 11). To perform an A/D
conversion in SLEEP, ensure the SLEEP
instruction immediately follows the instruction that sets the GO/DONE bit.
A/D Accuracy/Error
The absolute accuracy specified for the A/D converter
includes the sum of all contributions for quantization
error, integral error, differential error, full scale error, offset error, and monotonicity. It is defined as the maximum deviation from an actual transition versus an ideal
transition for any code. The absolute error of the A/D
converter is specified at < ±1 LSb for VDD = VREF (over
the device’s specified operating range). However, the
accuracy of the A/D converter will degrade as VDD
diverges from VREF.
For a given range of analog inputs, the output digital
code will be the same. This is due to the quantization of
the analog input to a digital code. Quantization error is
typically ± 1/2 LSb and is inherent in the analog to digital conversion process. The only way to reduce quantization error is to increase the resolution of the A/D
converter.
Offset error measures the first actual transition of a
code versus the first ideal transition of a code. Offset
error shifts the entire transfer function. Offset error can
be calibrated out of a system or introduced into a system through the interaction of the total leakage current
and source impedance at the analog input.
full scale error is that full scale does not take offset error
into account. Gain error can be calibrated out in software.
Linearity error refers to the uniformity of the code
changes. Linearity errors cannot be calibrated out of
the system. Integral non-linearity error measures the
actual code transition versus the ideal code transition
adjusted by the gain error for each code.
Differential non-linearity measures the maximum
actual code width versus the ideal code width. This
measure is unadjusted.
In systems where the device frequency is low, use of
the A/D RC clock is preferred. At moderate to high frequencies, TAD should be derived from the device oscillator. TAD must not violate the minimum and should be
≤ 8 µs for preferred operation. This is because TAD,
when derived from TOSC, is kept away from on-chip
phase clock transitions. This reduces, to a large extent,
the effects of digital switching noise. This is not possible
with the RC derived clock. The loss of accuracy due to
digital switching noise can be significant if many I/O
pins are active.
In systems where the device will enter SLEEP mode
after the start of the A/D conversion, the RC clock
source selection is required. In this mode, the digital
noise from the modules in SLEEP are stopped. This
method gives high accuracy.
7.7
Effects of a RESET
A device reset forces all registers to their reset state.
This forces the A/D module to be turned off, and any
conversion is aborted.
The value that is in the ADRES register is not modified
for a Power-on Reset. The ADRES register will contain
unknown data after a Power-on Reset.
7.8
Connection Considerations
If the input voltage exceeds the rail values (VSS or VDD)
by greater than 0.2V, then the accuracy of the conversion is out of specification.
Note:
Care must be taken when using the RA0
pin in A/D conversions due to its proximity
to the OSC1 pin.
An external RC filter is sometimes added for anti-aliasing of the input signal. The R component should be
selected to ensure that the total source impedance is
kept under the 10 kΩ recommended specification. Any
external components connected (via hi-impedance) to
an analog input pin (capacitor, zener diode, etc.) should
have very little leakage current at the pin.
Gain error measures the maximum deviation of the last
actual transition and the last ideal transition adjusted
for offset error. This error appears as a change in slope
of the transfer function. The difference in gain error to
DS30272A-page 44
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
7.9
Transfer Function
FIGURE 7-6:
A/D TRANSFER FUNCTION
The ideal transfer function of the A/D converter is as follows: the first transition occurs when the analog input
voltage (VAIN) is Analog VREF/256 (Figure 7-6).
References
Digital code output
7.10
A very good reference for understanding A/D converters is the "Analog-Digital Conversion Handbook" third
edition, published by Prentice Hall (ISBN 0-13-032848-0).
FFh
FEh
04h
03h
02h
01h
256 LSb
(full scale)
255 LSb
4 LSb
3 LSb
2 LSb
0.5 LSb
1 LSb
00h
Analog input voltage
FIGURE 7-7:
FLOWCHART OF A/D OPERATION
ADON = 0
Yes
ADON = 0?
No
Acquire
Selected Channel
Yes
GO = 0?
No
A/D Clock
= RC?
Yes
Start of A/D
Conversion Delayed
1 Instruction Cycle
Finish Conversion
GO = 0
ADIF = 1
No
No
Device in
SLEEP?
SLEEP Yes
Instruction?
Yes
Abort Conversion
GO = 0
ADIF = 0
Finish Conversion
GO = 0
ADIF = 1
Wait 2 TAD
No
No
Finish Conversion
GO = 0
ADIF = 1
Wake-up Yes
From Sleep?
SLEEP
Power-down A/D
Wait 2 TAD
Stay in Sleep
Power-down A/D
Wait 2 TAD
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 45
PIC16C71X
TABLE 7-3:
Address
REGISTERS/BITS ASSOCIATED WITH A/D, PIC16C710/71/711
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR
Value on
all other
Resets
GIE
ADIE
T0IE
INTE
RBIE
T0IF
INTF
RBIF
0000 000x
0000 000u
xxxx xxxx
uuuu uuuu
0Bh,8Bh
INTCON
89h
ADRES
A/D Result Register
08h
ADCON0
ADCS1 ADCS0
—
CHS1
CHS0
GO/DONE
ADIF
ADON
00-0 0000
00-0 0000
88h
ADCON1
—
—
—
—
—
—
PCFG1
PCFG0
---- --00
---- --00
05h
PORTA
—
—
—
RA4
RA3
RA2
RA1
RA0
---x 0000
---u 0000
---1 1111
---1 1111
85h
TRISA
—
—
— PORTA Data Direction Register
Legend: x = unknown, u = unchanged, - = unimplemented read as '0'. Shaded cells are not used for A/D conversion.
TABLE 7-4:
REGISTERS/BITS ASSOCIATED WITH A/D, PIC16C715
Address Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR
Value on
all other
Resets
0Bh/8Bh INTCON
PIR1
0Ch
GIE
PEIE
T0IE
INTE
RBIE
T0IF
INTF
RBIF
0000 000x
0000 000u
—
ADIF
—
—
—
—
—
—
-0-- ----
-0-- ----
—
ADIE
—
—
—
—
—
—
-0-- ----
-0-- ----
xxxx xxxx
uuuu uuuu
0000 00-0
0000 00-0
PCFG0 ---- --00
---- --00
8Ch
PIE1
1Eh
ADRES
A/D Result Register
1Fh
ADCON
0
ADCON
1
ADCS
1
—
ADCS
0
—
CHS2
CHS1
CHS0
—
—
PORTA
—
—
—
RA4
—
—
9Fh
05h
85h
TRISA
—
—
PCFG1
RA3
RA2
RA1
ADON
---x 0000
---u 0000
TRISA1 TRISA0 ---1 1111
---1 1111
RA0
TRISA
TRISA2
3
Legend: x = unknown, u = unchanged, - = unimplemented read as '0'. Shaded cells are not used for A/D conversion.
DS30272A-page 46
Powered by ICminer.com Electronic-Library Service CopyRight 2003
TRISA4
—
GO/
DONE
—
1997 Microchip Technology Inc.
PIC16C71X
8.0
SPECIAL FEATURES OF THE
CPU
Applicable Devices
fixed delay of 72 ms (nominal) on power-up only,
designed to keep the part in reset while the power supply stabilizes. With these two timers on-chip, most
applications need no external reset circuitry.
710 71 711 715
SLEEP mode is designed to offer a very low current
power-down mode. The user can wake-up from SLEEP
through external reset, Watchdog Timer Wake-up, or
through an interrupt. Several oscillator options are also
made available to allow the part to fit the application.
The RC oscillator option saves system cost while the
LP crystal option saves power. A set of configuration
bits are used to select various options.
What sets a microcontroller apart from other processors are special circuits to deal with the needs of realtime applications. The PIC16CXX family has a host of
such features intended to maximize system reliability,
minimize cost through elimination of external components, provide power saving operating modes and offer
code protection. These are:
• Oscillator selection
• Reset
- Power-on Reset (POR)
- Power-up Timer (PWRT)
- Oscillator Start-up Timer (OST)
- Brown-out Reset (BOR)
(PIC16C710/711/715)
- Parity Error Reset (PER) (PIC16C715)
• Interrupts
• Watchdog Timer (WDT)
• SLEEP
• Code protection
• ID locations
• In-circuit serial programming
8.1
Configuration Bits
The configuration bits can be programmed (read as '0')
or left unprogrammed (read as '1') to select various
device configurations. These bits are mapped in program memory location 2007h.
The user will note that address 2007h is beyond the
user program memory space. In fact, it belongs to the
special test/configuration memory space (2000h 3FFFh), which can be accessed only during programming.
The PIC16CXX has a Watchdog Timer which can be
shut off only through configuration bits. It runs off its
own RC oscillator for added reliability. There are two
timers that offer necessary delays on power-up. One is
the Oscillator Start-up Timer (OST), intended to keep
the chip in reset until the crystal oscillator is stable. The
other is the Power-up Timer (PWRT), which provides a
FIGURE 8-1:
—
—
CONFIGURATION WORD FOR PIC16C71
—
—
—
—
—
—
—
CP0
bit13
PWRTE WDTE FOSC1 FOSC0
bit0
Register:
Address
CONFIG
2007h
bit 13-5: Unimplemented: Read as '1'
bit 4:
CP0: Code protection bit
1 = Code protection off
0 = All memory is code protected, but 00h - 3Fh is writable
bit 3:
PWRTE: Power-up Timer Enable bit
1 = Power-up Timer enabled
0 = Power-up Timer disabled
bit 2:
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1-0:
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 47
PIC16C71X
FIGURE 8-2:
CP0
CP0
CONFIGURATION WORD, PIC16C710/711
CP0
CP0
CP0
CP0
CP0
BODEN
CP0
CP0
bit13
PWRTE WDTE FOSC1 FOSC0
bit0
Register:
Address
CONFIG
2007h
bit 13-7 CP0: Code protection bits (2)
5-4: 1 = Code protection off
0 = All memory is code protected, but 00h - 3Fh is writable
bit 6:
BODEN: Brown-out Reset Enable bit (1)
1 = BOR enabled
0 = BOR disabled
bit 3:
PWRTE: Power-up Timer Enable bit (1)
1 = PWRT disabled
0 = PWRT enabled
bit 2:
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1-0:
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Note 1: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT) regardless of the value of bit PWRTE.
Ensure the Power-up Timer is enabled anytime Brown-out Reset is enabled.
2: All of the CP0 bits have to be given the same value to enable the code protection scheme listed.
FIGURE 8-3:
CP1
CP0
CONFIGURATION WORD, PIC16C715
CP1
CP0
CP1
CP0 MPEEN BODEN
CP1
CP0
bit13
PWRTE WDTE FOSC1 FOSC0
bit0
bit 13-8
5-4:
CP1:CP0: Code Protection bits (2)
11 = Code protection off
10 = Upper half of program memory code protected
01 = Upper 3/4th of program memory code protected
00 = All memory is code protected
bit 7:
MPEEN: Memory Parity Error Enable
1 = Memory Parity Checking is enabled
0 = Memory Parity Checking is disabled
bit 6:
BODEN: Brown-out Reset Enable bit (1)
1 = BOR enabled
0 = BOR disabled
bit 3:
PWRTE: Power-up Timer Enable bit (1)
1 = PWRT disabled
0 = PWRT enabled
bit 2:
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1-0:
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Register:
Address
CONFIG
2007h
Note 1: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT) regardless of the value of bit PWRTE.
Ensure the Power-up Timer is enabled anytime Brown-out Reset is enabled.
2: All of the CP1:CP0 pairs have to be given the same value to enable the code protection scheme listed.
DS30272A-page 48
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
8.2
Oscillator Configurations
8.2.1
OSCILLATOR TYPES
TABLE 8-1:
The PIC16CXX can be operated in four different oscillator modes. The user can program two configuration
bits (FOSC1 and FOSC0) to select one of these four
modes:
•
•
•
•
LP
XT
HS
RC
8.2.2
Low Power Crystal
Crystal/Resonator
High Speed Crystal/Resonator
Resistor/Capacitor
Ranges Tested:
Mode
XT
CRYSTAL/CERAMIC
RESONATOR OPERATION
(HS, XT OR LP
OSC CONFIGURATION)
455 kHz
2.0 MHz
4.0 MHz
8.0 MHz
16.0 MHz
C2
(2)
47 - 100 pF
15 - 68 pF
15 - 68 pF
15 - 68 pF
10 - 47 pF
To internal
logic
See Table 8-1 and Table 8-1 for recommended values of
C1 and C2.
Panasonic EFO-A455K04B
Murata Erie CSA2.00MG
Murata Erie CSA4.00MG
Murata Erie CSA8.00MT
Murata Erie CSA16.00MX
TABLE 8-2:
± 0.3%
± 0.5%
± 0.5%
± 0.5%
± 0.5%
CAPACITOR SELECTION
FOR CRYSTAL OSCILLATOR,
PIC16C71
Mode
Freq
OSC1
OSC2
LP
32 kHz
200 kHz
100 kHz
500 kHz
1 MHz
2 MHz
4 MHz
8 MHz
20 MHz
33 - 68 pF
15 - 47 pF
47 - 100 pF
20 - 68 pF
15 - 68 pF
15 - 47 pF
15 - 33 pF
15 - 47 pF
15 - 47 pF
33 - 68 pF
15 - 47 pF
47 - 100 pF
20 - 68 pF
15 - 68 pF
15 - 47 pF
15 - 33 pF
15 - 47 pF
15 - 47 pF
SLEEP
PIC16CXXX
OSC2
47 - 100 pF
15 - 68 pF
15 - 68 pF
15 - 68 pF
10 - 47 pF
All resonators used did not have built-in capacitors.
C1
RS
Note1
OSC2
Resonators Used:
XT
OSC1
RF
OSC1
These values are for design guidance only. See
notes at bottom of page.
In XT, LP or HS modes a crystal or ceramic resonator
is connected to the OSC1/CLKIN and OSC2/CLKOUT
pins to establish oscillation (Figure 8-4). The
PIC16CXX Oscillator design requires the use of a parallel cut crystal. Use of a series cut crystal may give a
frequency out of the crystal manufacturers specifications. When in XT, LP or HS modes, the device can
have an external clock source to drive the OSC1/
CLKIN pin (Figure 8-5).
XTAL
Freq
455 kHz
2.0 MHz
4.0 MHz
8.0 MHz
16.0 MHz
HS
CRYSTAL OSCILLATOR/CERAMIC
RESONATORS
FIGURE 8-4:
CERAMIC RESONATORS,
PIC16C71
HS
These values are for design guidance only. See
notes at bottom of page.
Note 1: A series resistor may be required for AT strip
cut crystals.
2: The buffer is on the OSC2 pin.
FIGURE 8-5:
EXTERNAL CLOCK INPUT
OPERATION (HS, XT OR LP
OSC CONFIGURATION)
OSC1
Clock from
ext. system
PIC16CXXX
Open
OSC2
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 49
PIC16C71X
TABLE 8-3:
CERAMIC RESONATORS,
PIC16C710/711/715
TABLE 8-4:
CAPACITOR SELECTION
FOR CRYSTAL OSCILLATOR,
PIC16C710/711/715
Ranges Tested:
Mode
XT
Freq
455 kHz
2.0 MHz
4.0 MHz
8.0 MHz
16.0 MHz
HS
OSC1
68 - 100 pF
15 - 68 pF
15 - 68 pF
10 - 68 pF
10 - 22 pF
OSC2
68 - 100 pF
15 - 68 pF
15 - 68 pF
10 - 68 pF
10 - 22 pF
These values are for design guidance only. See
notes at bottom of page.
Osc Type
Crystal
Freq
Cap. Range
C1
Cap. Range
C2
LP
32 kHz
33 pF
33 pF
XT
HS
Resonators Used:
455 kHz
2.0 MHz
4.0 MHz
8.0 MHz
16.0 MHz
Panasonic EFO-A455K04B
Murata Erie CSA2.00MG
Murata Erie CSA4.00MG
Murata Erie CSA8.00MT
Murata Erie CSA16.00MX
± 0.3%
± 0.5%
± 0.5%
± 0.5%
± 0.5%
All resonators used did not have built-in capacitors.
200 kHz
15 pF
15 pF
200 kHz
47-68 pF
47-68 pF
1 MHz
15 pF
15 pF
4 MHz
15 pF
15 pF
4 MHz
15 pF
15 pF
8 MHz
15-33 pF
15-33 pF
20 MHz
15-33 pF
15-33 pF
These values are for design guidance only. See
notes at bottom of page.
Crystals Used
32 kHz
Epson C-001R32.768K-A
± 20 PPM
200 kHz
STD XTL 200.000KHz
± 20 PPM
1 MHz
ECS ECS-10-13-1
± 50 PPM
4 MHz
ECS ECS-40-20-1
± 50 PPM
8 MHz
EPSON CA-301 8.000M-C
± 30 PPM
20 MHz
EPSON CA-301 20.000M-C
± 30 PPM
Note 1: Recommended values of C1 and C2 are identical to the ranges tested table.
2: Higher capacitance increases the stability of oscillator but also increases the start-up time.
3: Since each resonator/crystal has its own characteristics, the user should consult the resonator/crystal manufacturer for appropriate values of external components.
4: Rs may be required in HS mode as well as XT mode to avoid overdriving crystals with low drive level specification.
DS30272A-page 50
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
8.2.3
EXTERNAL CRYSTAL OSCILLATOR
CIRCUIT
Either a prepackaged oscillator can be used or a simple
oscillator circuit with TTL gates can be built. Prepackaged oscillators provide a wide operating range and
better stability. A well-designed crystal oscillator will
provide good performance with TTL gates. Two types of
crystal oscillator circuits can be used; one with series
resonance, or one with parallel resonance.
Figure 8-6 shows implementation of a parallel resonant
oscillator circuit. The circuit is designed to use the fundamental frequency of the crystal. The 74AS04 inverter
performs the 180-degree phase shift that a parallel
oscillator requires. The 4.7 kΩ resistor provides the
negative feedback for stability. The 10 kΩ potentiometer biases the 74AS04 in the linear region. This could
be used for external oscillator designs.
FIGURE 8-6:
EXTERNAL PARALLEL
RESONANT CRYSTAL
OSCILLATOR CIRCUIT
+5V
To Other
Devices
10k
74AS04
4.7k
PIC16CXXX
CLKIN
74AS04
10k
10k
20 pF
Figure 8-7 shows a series resonant oscillator circuit.
This circuit is also designed to use the fundamental frequency of the crystal. The inverter performs a 180degree phase shift in a series resonant oscillator circuit. The 330 kΩ resistors provide the negative feedback to bias the inverters in their linear region.
FIGURE 8-7:
RC OSCILLATOR
For timing insensitive applications the “RC” device
option offers additional cost savings. The RC oscillator
frequency is a function of the supply voltage, the resistor (Rext) and capacitor (Cext) values, and the operating temperature. In addition to this, the oscillator
frequency will vary from unit to unit due to normal process parameter variation. Furthermore, the difference
in lead frame capacitance between package types will
also affect the oscillation frequency, especially for low
Cext values. The user also needs to take into account
variation due to tolerance of external R and C components used. Figure 8-8 shows how the R/C combination is connected to the PIC16CXX. For Rext values
below 2.2 kΩ, the oscillator operation may become
unstable, or stop completely. For very high Rext values
(e.g. 1 MΩ), the oscillator becomes sensitive to noise,
humidity and leakage. Thus, we recommend to keep
Rext between 3 kΩ and 100 kΩ.
Although the oscillator will operate with no external
capacitor (Cext = 0 pF), we recommend using values
above 20 pF for noise and stability reasons. With no or
small external capacitance, the oscillation frequency
can vary dramatically due to changes in external
capacitances, such as PCB trace capacitance or package lead frame capacitance.
See characterization data for desired device for RC frequency variation from part to part due to normal process variation. The variation is larger for larger R (since
leakage current variation will affect RC frequency more
for large R) and for smaller C (since variation of input
capacitance will affect RC frequency more).
XTAL
20 pF
8.2.4
See characterization data for desired device for variation of oscillator frequency due to VDD for given Rext/
Cext values as well as frequency variation due to operating temperature for given R, C, and VDD values.
The oscillator frequency, divided by 4, is available on
the OSC2/CLKOUT pin, and can be used for test purposes or to synchronize other logic (see Figure 3-2 for
waveform).
FIGURE 8-8:
EXTERNAL SERIES
RESONANT CRYSTAL
OSCILLATOR CIRCUIT
RC OSCILLATOR MODE
V DD
Rext
330 kΩ
330 kΩ
74AS04
74AS04
74AS04
0.1 µF
Internal
clock
OSC1
To Other
Devices
PIC16CXXX
CLKIN
Cext
PIC16CXXX
VSS
Fosc/4
OSC2/CLKOUT
XTAL
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 51
PIC16C71X
8.3
Reset
Applicable Devices
710 71 711 715
The PIC16CXX differentiates between various kinds of
reset:
•
•
•
•
•
•
Power-on Reset (POR)
MCLR reset during normal operation
MCLR reset during SLEEP
WDT Reset (normal operation)
Brown-out Reset (BOR) (PIC16C710/711/715)
Parity Error Reset (PIC16C715)
A simplified block diagram of the on-chip reset circuit is
shown in Figure 8-9.
Some registers are not affected in any reset condition;
their status is unknown on POR and unchanged in any
other reset. Most other registers are reset to a “reset
state” on Power-on Reset (POR), on the MCLR and
FIGURE 8-9:
WDT Reset, on MCLR reset during SLEEP, and Brownout Reset (BOR). They are not affected by a WDT
Wake-up, which is viewed as the resumption of normal
operation. The TO and PD bits are set or cleared differently in different reset situations as indicated in Table 87, Table 8-8 and Table 8-9. These bits are used in software to determine the nature of the reset. See Table 810 and Table 8-11 for a full description of reset states
of all registers.
The PIC16C710/711/715 have a MCLR noise filter in
the MCLR reset path. The filter will detect and ignore
small pulses.
It should be noted that a WDT Reset does not drive
MCLR pin low.
SIMPLIFIED BLOCK DIAGRAM OF ON-CHIP RESET CIRCUIT
External
Reset
MCLR/VPP Pin
MPEEN
Program
Memory
Parity(3)
WDT SLEEP
Module
WDT Time-out
VDD rise
detect
Power-on Reset
VDD
Brown-out
Reset(2)
S
BODEN
OST/PWRT
OST
Chip_Reset
10-bit Ripple-counter
OSC1/
CLKIN
Pin
On-chip(1)
RC OSC
R
Q
PWRT
10-bit Ripple-counter
Enable PWRT
See Table 8-6 for time-out situations.
Enable OST
Note 1: This is a separate oscillator from the RC oscillator of the CLKIN pin.
2: Brown-out Reset is implemented on the PIC16C710/711/715.
3: Parity Error Reset is implemented on the PIC16C715.
DS30272A-page 52
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
8.4
8.4.1
Power-on Reset (POR), Power-up
Timer (PWRT) and Oscillator Start-up
Timer (OST), and Brown-out Reset
(BOR)
The power-up time delay will vary from chip to chip due
to VDD, temperature, and process variation. See DC
parameters for details.
POWER-ON RESET (POR)
Applicable Devices
Applicable Devices
710 71 711 715
A Power-on Reset pulse is generated on-chip when
VDD rise is detected (in the range of 1.5V - 2.1V). To
take advantage of the POR, just tie the MCLR pin
directly (or through a resistor) to VDD. This will eliminate
external RC components usually needed to create a
Power-on Reset. A maximum rise time for VDD is specified. See Electrical Specifications for details.
When the device starts normal operation (exits the
reset condition), device operating parameters (voltage,
frequency, temperature, ...) must be met to ensure
operation. If these conditions are not met, the device
must be held in reset until the operating conditions are
met. Brown-out Reset may be used to meet the startup
conditions.
For additional information, refer to Application Note
AN607, "Power-up Trouble Shooting."
8.4.2
POWER-UP TIMER (PWRT)
Applicable Devices
710 71 711 715
The Power-up Timer provides a fixed 72 ms nominal
time-out on power-up only, from the POR. The Powerup Timer operates on an internal RC oscillator. The
chip is kept in reset as long as the PWRT is active. The
PWRT’s time delay allows VDD to rise to an acceptable
level. A configuration bit is provided to enable/disable
the PWRT.
8.4.3
OSCILLATOR START-UP TIMER (OST)
710 71 711 715
The Oscillator Start-up Timer (OST) provides 1024
oscillator cycle (from OSC1 input) delay after the
PWRT delay is over. This ensures that the crystal oscillator or resonator has started and stabilized.
The OST time-out is invoked only for XT, LP and HS
modes and only on Power-on Reset or wake-up from
SLEEP.
8.4.4
BROWN-OUT RESET (BOR)
Applicable Devices
710 71 711 715
A configuration bit, BODEN, can disable (if clear/programmed) or enable (if set) the Brown-out Reset circuitry. If VDD falls below 4.0V (3.8V - 4.2V range) for
greater than parameter #35, the brown-out situation will
reset the chip. A reset may not occur if VDD falls below
4.0V for less than parameter #35. The chip will remain
in Brown-out Reset until VDD rises above BVDD. The
Power-up Timer will now be invoked and will keep the
chip in RESET an additional 72 ms. If VDD drops below
BVDD while the Power-up Timer is running, the chip will
go back into a Brown-out Reset and the Power-up
Timer will be initialized. Once VDD rises above BVDD,
the Power-up Timer will execute a 72 ms time delay.
The Power-up Timer should always be enabled when
Brown-out Reset is enabled. Figure 8-10 shows typical
brown-out situations.
FIGURE 8-10: BROWN-OUT SITUATIONS
VDD
BVDD
Internal
Reset
72 ms
VDD
BVDD
Internal
Reset
<72 ms
72 ms
VDD
BVDD
Internal
Reset
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
72 ms
DS30272A-page 53
PIC16C71X
8.4.5
TIME-OUT SEQUENCE
Applicable Devices
710 71 711 715
On power-up the time-out sequence is as follows: First
PWRT time-out is invoked after the POR time delay has
expired. Then OST is activated. The total time-out will
vary based on oscillator configuration and the status of
the PWRT. For example, in RC mode with the PWRT
disabled, there will be no time-out at all. Figure 8-11,
Figure 8-12, and Figure 8-13 depict time-out
sequences on power-up.
Since the time-outs occur from the POR pulse, if MCLR
is kept low long enough, the time-outs will expire. Then
bringing MCLR high will begin execution immediately
(Figure 8-12). This is useful for testing purposes or to
synchronize more than one PIC16CXX device operating in parallel.
Table 8-10 and Table 8-11 show the reset conditions for
some special function registers, while Table 8-12 and
Table 8-13 show the reset conditions for all the
registers.
8.4.6
POWER CONTROL/STATUS REGISTER
(PCON)
Applicable Devices
710 71 711 715
The Power Control/Status Register, PCON has up to
two bits, depending upon the device.
Bit0 is Brown-out Reset Status bit, BOR. Bit BOR is
unknown on a Power-on Reset. It must then be set by
the user and checked on subsequent resets to see if bit
BOR cleared, indicating a BOR occurred. The BOR bit
is a "Don’t Care" bit and is not necessarily predictable
if the Brown-out Reset circuitry is disabled (by clearing
bit BODEN in the Configuration Word).
TABLE 8-5:
For the PIC16C715, bit2 is PER (Parity Error Reset). It
is cleared on a Parity Error Reset and must be set by
user software. It will also be set on a Power-on Reset.
For the PIC16C715, bit7 is MPEEN (Memory Parity
Error Enable). This bit reflects the status of the MPEEN
bit in configuration word. It is unaffected by any reset of
interrupt.
8.4.7
PARITY ERROR RESET (PER)
Applicable Devices
710 71 711 715
The PIC16C715 has on-chip parity bits that can be
used to verify the contents of program memory. Parity
bits may be useful in applications in order to increase
overall reliability of a system.
There are two parity bits for each word of Program
Memory. The parity bits are computed on alternating
bits of the program word. One computation is performed using even parity, the other using odd parity. As
a program executes, the parity is verified. The even parity bit is XOR’d with the even bits in the program memory word. The odd parity bit is negated and XOR’d with
the odd bits in the program memory word. When an
error is detected, a reset is generated and the PER flag
bit 2 in the PCON register is cleared (logic ‘0’). This indication can allow software to act on a failure. However,
there is no indication of the program memory location
of the failure in Program Memory. This flag can only be
set (logic ‘1’) by software.
The parity array is user selectable during programming.
Bit 7 of the configuration word located at address
2007h can be programmed (read as ‘0’) to disable parity. If left unprogrammed (read as ‘1’), parity is enabled.
TIME-OUT IN VARIOUS SITUATIONS, PIC16C71
Oscillator Configuration
XT, HS, LP
RC
TABLE 8-6:
Bit1 is POR (Power-on Reset Status bit). It is cleared
on a Power-on Reset and unaffected otherwise. The
user must set this bit following a Power-on Reset.
Power-up
PWRTE = 1
PWRTE = 0
72 ms + 1024TOSC
1024TOSC
72 ms
—
Wake-up from SLEEP
1024 TOSC
—
TIME-OUT IN VARIOUS SITUATIONS, PIC16C710/711/715
Oscillator Configuration
XT, HS, LP
RC
Power-up
PWRTE = 0
PWRTE = 1
72 ms + 1024TOSC
1024TOSC
72 ms
—
DS30272A-page 54
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Wake-up from SLEEP
Brown-out
72 ms + 1024TOSC
72 ms
1024TOSC
—
1997 Microchip Technology Inc.
PIC16C71X
TABLE 8-7:
STATUS BITS AND THEIR SIGNIFICANCE, PIC16C71
TO
PD
1
0
x
0
0
u
1
1
x
0
1
0
u
0
TABLE 8-8:
Power-on Reset
Illegal, TO is set on POR
Illegal, PD is set on POR
WDT Reset
WDT Wake-up
MCLR Reset during normal operation
MCLR Reset during SLEEP or interrupt wake-up from SLEEP
STATUS BITS AND THEIR SIGNIFICANCE, PIC16C710/711
POR
BOR
TO
PD
0
0
0
1
1
1
1
1
x
x
x
0
1
1
1
1
1
0
x
x
0
0
u
1
1
x
0
x
1
0
u
0
TABLE 8-9:
Power-on Reset
Illegal, TO is set on POR
Illegal, PD is set on POR
Brown-out Reset
WDT Reset
WDT Wake-up
MCLR Reset during normal operation
MCLR Reset during SLEEP or interrupt wake-up from SLEEP
STATUS BITS AND THEIR SIGNIFICANCE, PIC16C715
PER
POR
BOR
TO
PD
1
x
x
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
x
x
x
x
0
1
1
1
1
1
x
0
1
0
x
x
0
0
u
1
1
x
x
1
x
0
x
1
0
u
0
1
x
x
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Power-on Reset
Illegal, TO is set on POR
Illegal, PD is set on POR
Brown-out Reset
WDT Reset
WDT Wake-up
MCLR Reset during normal operation
MCLR Reset during SLEEP or interrupt wake-up from SLEEP
Parity Error Reset
Illegal, PER is set on POR
Illegal, PER is set on BOR
DS30272A-page 55
PIC16C71X
TABLE 8-10:
RESET CONDITION FOR SPECIAL REGISTERS, PIC16C710/71/711
Condition
Program
Counter
STATUS
Register
PCON
Register
PIC16C710/711
Power-on Reset
000h
0001 1xxx
---- --0x
MCLR Reset during normal operation
000h
000u uuuu
---- --uu
MCLR Reset during SLEEP
000h
0001 0uuu
---- --uu
WDT Reset
000h
0000 1uuu
---- --uu
WDT Wake-up
PC + 1
uuu0 0uuu
---- --uu
Brown-out Reset (PIC16C710/711)
000h
0001 1uuu
---- --u0
uuu1 0uuu
---- --uu
Interrupt wake-up from SLEEP
(1)
PC + 1
Legend: u = unchanged, x = unknown, - = unimplemented bit read as '0'.
Note 1: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded
with the interrupt vector (0004h).
TABLE 8-11:
RESET CONDITION FOR SPECIAL REGISTERS, PIC16C715
Condition
Program
Counter
STATUS
Register
PCON
Register
Power-on Reset
000h
0001 1xxx
u--- -10x
MCLR Reset during normal operation
000h
000u uuuu
u--- -uuu
MCLR Reset during SLEEP
000h
0001 0uuu
u--- -uuu
WDT Reset
000h
0000 1uuu
u--- -uuu
WDT Wake-up
PC + 1
uuu0 0uuu
u--- -uuu
Brown-out Reset
000h
0001 1uuu
u--- -uu0
Parity Error Reset
000h
uuu1 0uuu
u--- -0uu
uuu1 0uuu
u--- -uuu
Interrupt wake-up from SLEEP
(1)
PC + 1
Legend: u = unchanged, x = unknown, - = unimplemented bit read as '0'.
Note 1: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector
(0004h).
DS30272A-page 56
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
TABLE 8-12:
Register
INITIALIZATION CONDITIONS FOR ALL REGISTERS, PIC16C710/71/711
Power-on Reset,
Brown-out Reset(5)
MCLR Resets
WDT Reset
Wake-up via
WDT or
Interrupt
xxxx xxxx
uuuu uuuu
uuuu uuuu
INDF
N/A
N/A
N/A
TMR0
xxxx xxxx
uuuu uuuu
uuuu uuuu
0000h
0000h
PC + 1(2)
STATUS
0001 1xxx
000q quuu(3)
uuuq quuu(3)
FSR
xxxx xxxx
uuuu uuuu
uuuu uuuu
PORTA
---x 0000
---u 0000
---u uuuu
PORTB
xxxx xxxx
uuuu uuuu
uuuu uuuu
PCLATH
---0 0000
---0 0000
---u uuuu
INTCON
0000 000x
0000 000u
uuuu uuuu(1)
ADRES
xxxx xxxx
uuuu uuuu
uuuu uuuu
ADCON0
00-0 0000
00-0 0000
uu-u uuuu
OPTION
1111 1111
1111 1111
uuuu uuuu
TRISA
---1 1111
---1 1111
---u uuuu
W
PCL
TRISB
1111 1111
1111 1111
uuuu uuuu
PCON
---- --0u
---- --uu
---- --uu
ADCON1
---- --00
---- --00
---- --uu
(4)
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as '0', q = value depends on condition
Note 1: One or more bits in INTCON will be affected (to cause wake-up).
2: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector
(0004h).
3: See Table 8-10 for reset value for specific condition.
4: The PCON register is not implemented on the PIC16C71.
5: Brown-out reset is not implemented on the PIC16C71.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 57
PIC16C71X
TABLE 8-13:
Register
INITIALIZATION CONDITIONS FOR ALL REGISTERS, PIC16C715
Power-on Reset,
Brown-out Reset
Parity Error Reset
MCLR Resets
WDT Reset
Wake-up via
WDT or
Interrupt
xxxx xxxx
uuuu uuuu
uuuu uuuu
INDF
N/A
N/A
N/A
TMR0
xxxx xxxx
uuuu uuuu
uuuu uuuu
PCL
0000 0000
0000 0000
PC + 1(2)
STATUS
0001 1xxx
000q quuu(3)
uuuq quuu(3)
FSR
xxxx xxxx
uuuu uuuu
uuuu uuuu
PORTA
---x 0000
---u 0000
---u uuuu
W
PORTB
xxxx xxxx
uuuu uuuu
uuuu uuuu
PCLATH
---0 0000
---0 0000
---u uuuu
INTCON
0000 000x
0000 000u
uuuu uuuu(1)
PIR1
-0-- ----
-0-- ----
-u-- ----(1)
ADCON0
0000 00-0
0000 00-0
uuuu uu-u
OPTION
1111 1111
1111 1111
uuuu uuuu
TRISA
---1 1111
---1 1111
---u uuuu
TRISB
1111 1111
1111 1111
uuuu uuuu
PIE1
-0-- ----
-0-- ----
-u-- ----
PCON
---- -qqq
---- -1uu
---- -1uu
ADCON1
---- --00
---- --00
---- --uu
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as '0', q = value depends on condition
Note 1: One or more bits in INTCON and PIR1 will be affected (to cause wake-up).
2: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector
(0004h).
3: See Table 8-11 for reset value for specific condition.
DS30272A-page 58
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
FIGURE 8-11: TIME-OUT SEQUENCE ON POWER-UP (MCLR NOT TIED TO VDD): CASE 1
VDD
MCLR
INTERNAL POR
TPWRT
PWRT TIME-OUT
TOST
OST TIME-OUT
INTERNAL RESET
FIGURE 8-12: TIME-OUT SEQUENCE ON POWER-UP (MCLR NOT TIED TO VDD): CASE 2
VDD
MCLR
INTERNAL POR
TPWRT
PWRT TIME-OUT
TOST
OST TIME-OUT
INTERNAL RESET
FIGURE 8-13: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD)
VDD
MCLR
INTERNAL POR
TPWRT
PWRT TIME-OUT
TOST
OST TIME-OUT
INTERNAL RESET
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 59
PIC16C71X
FIGURE 8-14: EXTERNAL POWER-ON
RESET CIRCUIT (FOR SLOW
VDD POWER-UP)
FIGURE 8-15: EXTERNAL BROWN-OUT
PROTECTION CIRCUIT 1
VDD
D
VDD
33k
VDD
10k
R
R1
40k
MCLR
C
MCLR
PIC16CXX
PIC16CXX
Note 1: External Power-on Reset circuit is
required only if VDD power-up slope is too
slow. The diode D helps discharge the
capacitor quickly when VDD powers down.
2: R < 40 kΩ is recommended to make sure
that voltage drop across R does not violate
the device’s electrical specification.
3: R1 = 100Ω to 1 kΩ will limit any current
flowing into MCLR from external capacitor
C in the event of MCLR/VPP pin breakdown due to Electrostatic Discharge
(ESD) or Electrical Overstress (EOS).
Note 1: This circuit will activate reset when VDD
goes below (Vz + 0.7V) where Vz = Zener
voltage.
2: Internal brown-out detection on the
PIC16C710/711/715 should be disabled
when using this circuit.
3: Resistors should be adjusted for the characteristics of the transistor.
FIGURE 8-16: EXTERNAL BROWN-OUT
PROTECTION CIRCUIT 2
VDD
VDD
R1
Q1
MCLR
R2
40k
PIC16CXX
Note 1: This brown-out circuit is less expensive,
albeit less accurate. Transistor Q1 turns
off when VDD is below a certain level
such that:
R1
= 0.7V
VDD •
R1 + R2
2: Internal brown-out detection on the
PIC16C710/711/715 should be disabled
when using this circuit.
3: Resistors should be adjusted for the
characteristics of the transistor.
DS30272A-page 60
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
8.5
Interrupts
Applicable Devices
710 71 711 715
The PIC16C71X family has 4 sources of interrupt.
Interrupt Sources
External interrupt RB0/INT
TMR0 overflow interrupt
PORTB change interrupts (pins RB7:RB4)
A/D Interrupt
For external interrupt events, such as the INT pin or
PORTB change interrupt, the interrupt latency will be
three or four instruction cycles. The exact latency
depends when the interrupt event occurs (Figure 8-19).
The latency is the same for one or two cycle instructions. Individual interrupt flag bits are set regardless of
the status of their corresponding mask bit or the GIE
bit.
Note:
The interrupt control register (INTCON) records individual interrupt requests in flag bits. It also has individual and global interrupt enable bits.
Note:
Individual interrupt flag bits are set regardless of the status of their corresponding
mask bit or the GIE bit.
A global interrupt enable bit, GIE (INTCON<7>)
enables (if set) all un-masked interrupts or disables (if
cleared) all interrupts. When bit GIE is enabled, and an
interrupt’s flag bit and mask bit are set, the interrupt will
vector immediately. Individual interrupts can be disabled through their corresponding enable bits in various registers. Individual interrupt bits are set
regardless of the status of the GIE bit. The GIE bit is
cleared on reset.
The “return from interrupt” instruction, RETFIE, exits
the interrupt routine as well as sets the GIE bit, which
re-enables interrupts.
The RB0/INT pin interrupt, the RB port change interrupt and the TMR0 overflow interrupt flags are contained in the INTCON register.
The peripheral interrupt flags are contained in the special function registers PIR1 and PIR2. The corresponding interrupt enable bits are contained in special
function registers PIE1 and PIE2, and the peripheral
interrupt enable bit is contained in special function register INTCON.
For the PIC16C71
If an interrupt occurs while the Global Interrupt Enable (GIE) bit is being cleared, the
GIE bit may unintentionally be re-enabled
by the user’s Interrupt Service Routine (the
RETFIE instruction). The events that
would cause this to occur are:
1.
An instruction clears the GIE bit while
an interrupt is acknowledged.
2.
The program branches to the Interrupt
vector and executes the Interrupt Service Routine.
3.
The Interrupt Service Routine completes with the execution of the RETFIE instruction. This causes the GIE
bit to be set (enables interrupts), and
the program returns to the instruction
after the one which was meant to disable interrupts.
Perform the following to ensure that interrupts are globally disabled:
LOOP BCF
INTCON, GIE
BTFSC INTCON, GIE
GOTO
:
LOOP
; Disable global
; interrupt bit
; Global interrupt
;
disabled?
; NO, try again
;
Yes, continue
;
with program
;
flow
When an interrupt is responded to, the GIE bit is
cleared to disable any further interrupt, the return
address is pushed onto the stack and the PC is loaded
with 0004h. Once in the interrupt service routine the
source(s) of the interrupt can be determined by polling
the interrupt flag bits. The interrupt flag bit(s) must be
cleared in software before re-enabling interrupts to
avoid recursive interrupts.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 61
PIC16C71X
FIGURE 8-17: INTERRUPT LOGIC, PIC16C710, 71, 711
Wakeup
(If in SLEEP mode)
T0IF
T0IE
INTF
INTE
Interrupt to CPU
RBIF
RBIE
ADIF
ADIE
GIE
FIGURE 8-18: INTERRUPT LOGIC, PIC16C715
T0IF
T0IE
INTF
INTE
Wakeup
(If in SLEEP mode)
Interrupt to CPU
RBIF
RBIE
ADIF
ADIE
ADIF
GIE
DS30272A-page 62
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
8.5.1
8.5.2
INT INTERRUPT
TMR0 INTERRUPT
An overflow (FFh → 00h) in the TMR0 register will set
flag bit T0IF (INTCON<2>). The interrupt can be
enabled/disabled by setting/clearing enable bit T0IE
(INTCON<5>). (Section 6.0)
External interrupt on RB0/INT pin is edge triggered:
either rising if bit INTEDG (OPTION<6>) is set, or falling, if the INTEDG bit is clear. When a valid edge
appears on the RB0/INT pin, flag bit INTF
(INTCON<1>) is set. This interrupt can be disabled by
clearing enable bit INTE (INTCON<4>). Flag bit INTF
must be cleared in software in the interrupt service routine before re-enabling this interrupt. The INT interrupt
can wake-up the processor from SLEEP, if bit INTE was
set prior to going into SLEEP. The status of global interrupt enable bit GIE decides whether or not the processor branches to the interrupt vector following wake-up.
See Section 8.8 for details on SLEEP mode.
8.5.3
PORTB INTCON CHANGE
An input change on PORTB<7:4> sets flag bit RBIF
(INTCON<0>). The interrupt can be enabled/disabled
by setting/clearing enable bit RBIE (INTCON<4>).
(Section 5.2)
Note:
For the PIC16C71
if a change on the I/O pin should occur
when the read operation is being executed
(start of the Q2 cycle), then the RBIF interrupt flag may not get set.
FIGURE 8-19: INT PIN INTERRUPT TIMING
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
OSC1
CLKOUT 3
4
INT pin
1
1
INTF flag
(INTCON<1>)
Interrupt Latency 2
5
GIE bit
(INTCON<7>)
INSTRUCTION FLOW
PC
PC
Instruction
fetched
Inst (PC)
Instruction
executed
Inst (PC-1)
PC+1
Inst (PC+1)
Inst (PC)
0004h
PC+1
—
Dummy Cycle
0005h
Inst (0004h)
Inst (0005h)
Dummy Cycle
Inst (0004h)
Note 1: INTF flag is sampled here (every Q1).
2: Interrupt latency = 3-4 Tcy where Tcy = instruction cycle time.
Latency is the same whether Inst (PC) is a single cycle or a 2-cycle instruction.
3: CLKOUT is available only in RC oscillator mode.
4: For minimum width of INT pulse, refer to AC specs.
5: INTF is enabled to be set anytime during the Q4-Q1 cycles.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 63
PIC16C71X
8.6
Context Saving During Interrupts
During an interrupt, only the return PC value is saved
on the stack. Typically, users may wish to save key registers during an interrupt i.e., W register and STATUS
register. This will have to be implemented in software.
Example 8-1 stores and restores the STATUS and W
registers. The user register, STATUS_TEMP, must be
defined in bank 0.
The example:
a)
b)
c)
d)
e)
Stores the W register.
Stores the STATUS register in bank 0.
Executes the ISR code.
Restores the STATUS register (and bank select
bit).
Restores the W register.
EXAMPLE 8-1:
SAVING STATUS AND W REGISTERS IN RAM
MOVWF
SWAPF
MOVWF
:
:(ISR)
:
SWAPF
W_TEMP
STATUS,W
STATUS_TEMP
;Copy W to TEMP register, could be bank one or zero
;Swap status to be saved into W
;Save status to bank zero STATUS_TEMP register
STATUS_TEMP,W
MOVWF
SWAPF
SWAPF
STATUS
W_TEMP,F
W_TEMP,W
;Swap STATUS_TEMP register into W
;(sets bank to original state)
;Move W into STATUS register
;Swap W_TEMP
;Swap W_TEMP into W
DS30272A-page 64
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
8.7
Watchdog Timer (WDT)
Applicable Devices
assigned to the WDT under software control by writing
to the OPTION register. Thus, time-out periods up to
2.3 seconds can be realized.
710 71 711 715
The CLRWDT and SLEEP instructions clear the WDT and
the postscaler, if assigned to the WDT, and prevent it
from timing out and generating a device RESET condition.
The Watchdog Timer is as a free running on-chip RC
oscillator which does not require any external components. This RC oscillator is separate from the RC oscillator of the OSC1/CLKIN pin. That means that the WDT
will run, even if the clock on the OSC1/CLKIN and
OSC2/CLKOUT pins of the device has been stopped,
for example, by execution of a SLEEP instruction. During normal operation, a WDT time-out generates a
device RESET (Watchdog Timer Reset). If the device is
in SLEEP mode, a WDT time-out causes the device to
wake-up and continue with normal operation (Watchdog Timer Wake-up). The WDT can be permanently
disabled by clearing configuration bit WDTE
(Section 8.1).
8.7.1
The TO bit in the STATUS register will be cleared upon
a Watchdog Timer time-out.
8.7.2
WDT PROGRAMMING CONSIDERATIONS
It should also be taken into account that under worst
case conditions (VDD = Min., Temperature = Max., and
max. WDT prescaler) it may take several seconds
before a WDT time-out occurs.
Note:
When a CLRWDT instruction is executed
and the prescaler is assigned to the WDT,
the prescaler count will be cleared, but the
prescaler assignment is not changed.
WDT PERIOD
The WDT has a nominal time-out period of 18 ms, (with
no prescaler). The time-out periods vary with temperature, VDD and process variations from part to part (see
DC specs). If longer time-out periods are desired, a
prescaler with a division ratio of up to 1:128 can be
FIGURE 8-20: WATCHDOG TIMER BLOCK DIAGRAM
From TMR0 Clock Source
(Figure 6-6)
0
WDT Timer
Postscaler
M
U
X
1
8
8 - to - 1 MUX
PS2:PS0
PSA
WDT
Enable Bit
To TMR0 (Figure 6-6)
0
1
MUX
PSA
WDT
Time-out
Note: PSA and PS2:PS0 are bits in the OPTION register.
FIGURE 8-21: SUMMARY OF WATCHDOG TIMER REGISTERS
Address
Name
2007h
Config. bits
81h,181h
OPTION
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
(1)
BODEN(1)
CP1
CP0
PWRTE(1)
WDTE
FOSC1
FOSC0
RBPU
INTEDG
T0CS
T0SE
PSA
PS2
PS1
PS0
Legend: Shaded cells are not used by the Watchdog Timer.
Note 1: See Figure 8-1, Figure 8-2 and Figure 8-3 for operation of these bits.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 65
PIC16C71X
8.8
Power-down Mode (SLEEP)
Power-down mode is entered by executing a SLEEP
instruction.
If enabled, the Watchdog Timer will be cleared but
keeps running, the PD bit (STATUS<3>) is cleared, the
TO (STATUS<4>) bit is set, and the oscillator driver is
turned off. The I/O ports maintain the status they had,
before the SLEEP instruction was executed (driving
high, low, or hi-impedance).
For lowest current consumption in this mode, place all
I/O pins at either VDD, or VSS, ensure no external circuitry is drawing current from the I/O pin, power-down
the A/D, disable external clocks. Pull all I/O pins, that
are hi-impedance inputs, high or low externally to avoid
switching currents caused by floating inputs. The
T0CKI input should also be at VDD or VSS for lowest
current consumption. The contribution from on-chip
pull-ups on PORTB should be considered.
The MCLR pin must be at a logic high level (VIHMC).
8.8.1
WAKE-UP FROM SLEEP
The device can wake up from SLEEP through one of
the following events:
1.
2.
3.
External reset input on MCLR pin.
Watchdog Timer Wake-up (if WDT was
enabled).
Interrupt from INT pin, RB port change, or some
Peripheral Interrupts.
Other peripherals cannot generate interrupts since during SLEEP, no on-chip Q clocks are present.
When the SLEEP instruction is being executed, the next
instruction (PC + 1) is pre-fetched. For the device to
wake-up through an interrupt event, the corresponding
interrupt enable bit must be set (enabled). Wake-up is
regardless of the state of the GIE bit. If the GIE bit is
clear (disabled), the device continues execution at the
instruction after the SLEEP instruction. If the GIE bit is
set (enabled), the device executes the instruction after
the SLEEP instruction and then branches to the interrupt address (0004h). In cases where the execution of
the instruction following SLEEP is not desirable, the
user should have a NOP after the SLEEP instruction.
8.8.2
WAKE-UP USING INTERRUPTS
When global interrupts are disabled (GIE cleared) and
any interrupt source has both its interrupt enable bit
and interrupt flag bit set, one of the following will occur:
• If the interrupt occurs before the the execution of
a SLEEP instruction, the SLEEP instruction will
complete as a NOP. Therefore, the WDT and WDT
postscaler will not be cleared, the TO bit will not
be set and PD bits will not be cleared.
• If the interrupt occurs during or after the execution of a SLEEP instruction, the device will immediately wake up from sleep . The SLEEP instruction
will be completely executed before the wake-up.
Therefore, the WDT and WDT postscaler will be
cleared, the TO bit will be set and the PD bit will
be cleared.
External MCLR Reset will cause a device reset. All
other events are considered a continuation of program
execution and cause a "wake-up". The TO and PD bits
in the STATUS register can be used to determine the
cause of device reset. The PD bit, which is set on
power-up, is cleared when SLEEP is invoked. The TO bit
is cleared if a WDT time-out occurred (and caused
wake-up).
Even if the flag bits were checked before executing a
SLEEP instruction, it may be possible for flag bits to
become set before the SLEEP instruction completes. To
determine whether a SLEEP instruction executed, test
the PD bit. If the PD bit is set, the SLEEP instruction was
executed as a NOP.
The following peripheral interrupts can wake the device
from SLEEP:
To ensure that the WDT is cleared, a CLRWDT instruction should be executed before a SLEEP instruction.
1.
2.
TMR1 interrupt. Timer1 must be operating as
an asynchronous counter.
A/D conversion (when A/D clock source is RC).
DS30272A-page 66
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
FIGURE 8-22: WAKE-UP FROM SLEEP THROUGH INTERRUPT
Q1 Q2 Q3 Q4
Q1 Q2 Q3 Q4
Q1
Q1 Q2 Q3 Q4
Q1 Q2 Q3 Q4
Q1 Q2 Q3 Q4
Q1 Q2 Q3
Q4
OSC1
TOST(2)
CLKOUT(4)
INT pin
INTF flag
(INTCON<1>)
Interrupt Latency
(Note 2)
GIE bit
(INTCON<7>)
Processor in
SLEEP
INSTRUCTION FLOW
PC
PC
Instruction
fetched
Inst(PC) = SLEEP
Instruction
executed
Inst(PC - 1)
Note 1:
2:
3:
4:
8.9
PC+1
PC+2
Inst(PC + 2)
SLEEP
Inst(PC + 1)
8.10
Program Verification/Code Protection
Microchip does not recommend code protecting windowed devices.
ID Locations
Four memory locations (2000h - 2003h) are designated
as ID locations where the user can store checksum or
other code-identification numbers. These locations are
not accessible during normal execution but are readable and writable during program/verify. It is recommended that only the 4 least significant bits of the ID
location are used.
8.11
PC + 2
Dummy cycle
0004h
0005h
Inst(0004h)
Inst(0005h)
Dummy cycle
Inst(0004h)
XT, HS or LP oscillator mode assumed.
TOST = 1024TOSC (drawing not to scale) This delay will not be there for RC osc mode.
GIE = '1' assumed. In this case after wake- up, the processor jumps to the interrupt routine. If GIE = '0', execution will continue in-line.
CLKOUT is not available in these osc modes, but shown here for timing reference.
If the code protection bit(s) have not been programmed, the on-chip program memory can be read
out for verification purposes.
Note:
PC+2
Inst(PC + 1)
In-Circuit Serial Programming
PIC16CXX microcontrollers can be serially programmed while in the end application circuit. This is
simply done with two lines for clock and data, and three
other lines for power, ground, and the programming
voltage. This allows customers to manufacture boards
with unprogrammed devices, and then program the
microcontroller just before shipping the product. This
also allows the most recent firmware or a custom firmware to be programmed.
The device is placed into a program/verify mode by
holding the RB6 and RB7 pins low while raising the
MCLR (VPP) pin from VIL to VIHH (see programming
specification). RB6 becomes the programming clock
and RB7 becomes the programming data. Both RB6
and RB7 are Schmitt Trigger inputs in this mode.
After reset, to place the device into programming/verify
mode, the program counter (PC) is at location 00h. A 6bit command is then supplied to the device. Depending
on the command, 14-bits of program data are then supplied to or from the device, depending if the command
was a load or a read. For complete details of serial programming, please refer to the PIC16C6X/7X Programming Specifications (Literature #DS30228).
FIGURE 8-23: TYPICAL IN-CIRCUIT SERIAL
PROGRAMMING
CONNECTION
External
Connector
Signals
To Normal
Connections
PIC16CXX
+5V
VDD
0V
VSS
VPP
MCLR/VPP
CLK
RB6
Data I/O
RB7
VDD
To Normal
Connections
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 67
PIC16C71X
NOTES:
DS30272A-page 68
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
9.0
INSTRUCTION SET SUMMARY
Each PIC16CXX instruction is a 14-bit word divided
into an OPCODE which specifies the instruction type
and one or more operands which further specify the
operation of the instruction. The PIC16CXX instruction
set summary in Table 9-2 lists byte-oriented, bit-oriented, and literal and control operations. Table 9-1
shows the opcode field descriptions.
For byte-oriented instructions, 'f' represents a file register designator and 'd' represents a destination designator. The file register designator specifies which file
register is to be used by the instruction.
The destination designator specifies where the result of
the operation is to be placed. If 'd' is zero, the result is
placed in the W register. If 'd' is one, the result is placed
in the file register specified in the instruction.
For bit-oriented instructions, 'b' represents a bit field
designator which selects the number of the bit affected
by the operation, while 'f' represents the number of the
file in which the bit is located.
For literal and control operations, 'k' represents an
eight or eleven bit constant or literal value.
TABLE 9-1:
OPCODE FIELD
DESCRIPTIONS
Field
Description
Register file address (0x00 to 0x7F)
Working register (accumulator)
Bit address within an 8-bit file register
Literal field, constant data or label
Don't care location (= 0 or 1)
The assembler will generate code with x = 0. It is the
recommended form of use for compatibility with all
Microchip software tools.
d
Destination select; d = 0: store result in W,
d = 1: store result in file register f.
Default is d = 1
label Label name
TOS Top of Stack
PC Program Counter
f
W
b
k
x
• Byte-oriented operations
• Bit-oriented operations
• Literal and control operations
All instructions are executed within one single instruction cycle, unless a conditional test is true or the program counter is changed as a result of an instruction.
In this case, the execution takes two instruction cycles
with the second cycle executed as a NOP. One instruction cycle consists of four oscillator periods. Thus, for
an oscillator frequency of 4 MHz, the normal instruction
execution time is 1 µs. If a conditional test is true or the
program counter is changed as a result of an instruction, the instruction execution time is 2 µs.
Table 9-2 lists the instructions recognized by the
MPASM assembler.
Figure 9-1 shows the general formats that the instructions can have.
Note:
To maintain upward compatibility with
future PIC16CXX products, do not use the
OPTION and TRIS instructions.
All examples use the following format to represent a
hexadecimal number:
0xhh
where h signifies a hexadecimal digit.
FIGURE 9-1:
GENERAL FORMAT FOR
INSTRUCTIONS
Byte-oriented file register operations
13
8 7 6
OPCODE
d
f (FILE #)
0
d = 0 for destination W
d = 1 for destination f
f = 7-bit file register address
Bit-oriented file register operations
13
10 9
7 6
OPCODE
b (BIT #)
f (FILE #)
0
b = 3-bit bit address
f = 7-bit file register address
PCLATH Program Counter High Latch
GIE
WDT
TO
PD
dest
[ ]
( )
→
<>
∈
Global Interrupt Enable bit
Watchdog Timer/Counter
Time-out bit
Power-down bit
Destination either the W register or the specified
register file location
Options
Contents
Assigned to
Literal and control operations
General
13
8
7
OPCODE
0
k (literal)
k = 8-bit immediate value
CALL and GOTO instructions only
13
11
10
0
Register bit field
OPCODE
In the set of
k = 11-bit immediate value
k (literal)
italics User defined term (font is courier)
The instruction set is highly orthogonal and is grouped
into three basic categories:
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 69
PIC16C71X
TABLE 9-2:
PIC16CXX INSTRUCTION SET
Mnemonic,
Operands
Description
Cycles
14-Bit Opcode
MSb
LSb
Status
Affected
Notes
BYTE-ORIENTED FILE REGISTER OPERATIONS
ADDWF
ANDWF
CLRF
CLRW
COMF
DECF
DECFSZ
INCF
INCFSZ
IORWF
MOVF
MOVWF
NOP
RLF
RRF
SUBWF
SWAPF
XORWF
f, d
f, d
f
f, d
f, d
f, d
f, d
f, d
f, d
f, d
f
f, d
f, d
f, d
f, d
f, d
Add W and f
AND W with f
Clear f
Clear W
Complement f
Decrement f
Decrement f, Skip if 0
Increment f
Increment f, Skip if 0
Inclusive OR W with f
Move f
Move W to f
No Operation
Rotate Left f through Carry
Rotate Right f through Carry
Subtract W from f
Swap nibbles in f
Exclusive OR W with f
1
1
1
1
1
1
1(2)
1
1(2)
1
1
1
1
1
1
1
1
1
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
0111
0101
0001
0001
1001
0011
1011
1010
1111
0100
1000
0000
0000
1101
1100
0010
1110
0110
dfff
dfff
lfff
0xxx
dfff
dfff
dfff
dfff
dfff
dfff
dfff
lfff
0xx0
dfff
dfff
dfff
dfff
dfff
ffff
ffff
ffff
xxxx
ffff
ffff
ffff
ffff
ffff
ffff
ffff
ffff
0000
ffff
ffff
ffff
ffff
ffff
1
1
1 (2)
1 (2)
01
01
01
01
00bb
01bb
10bb
11bb
bfff
bfff
bfff
bfff
ffff
ffff
ffff
ffff
1
1
2
1
2
1
1
2
2
2
1
1
1
11
11
10
00
10
11
11
00
11
00
00
11
11
111x
1001
0kkk
0000
1kkk
1000
00xx
0000
01xx
0000
0000
110x
1010
kkkk
kkkk
kkkk
0110
kkkk
kkkk
kkkk
0000
kkkk
0000
0110
kkkk
kkkk
kkkk
kkkk
kkkk
0100
kkkk
kkkk
kkkk
1001
kkkk
1000
0011
kkkk
kkkk
C,DC,Z
Z
Z
Z
Z
Z
Z
Z
Z
C
C
C,DC,Z
Z
1,2
1,2
2
1,2
1,2
1,2,3
1,2
1,2,3
1,2
1,2
1,2
1,2
1,2
1,2
1,2
BIT-ORIENTED FILE REGISTER OPERATIONS
BCF
BSF
BTFSC
BTFSS
f, b
f, b
f, b
f, b
Bit Clear f
Bit Set f
Bit Test f, Skip if Clear
Bit Test f, Skip if Set
1,2
1,2
3
3
LITERAL AND CONTROL OPERATIONS
ADDLW
ANDLW
CALL
CLRWDT
GOTO
IORLW
MOVLW
RETFIE
RETLW
RETURN
SLEEP
SUBLW
XORLW
k
k
k
k
k
k
k
k
k
Add literal and W
AND literal with W
Call subroutine
Clear Watchdog Timer
Go to address
Inclusive OR literal with W
Move literal to W
Return from interrupt
Return with literal in W
Return from Subroutine
Go into standby mode
Subtract W from literal
Exclusive OR literal with W
C,DC,Z
Z
TO,PD
Z
TO,PD
C,DC,Z
Z
Note 1: When an I/O register is modified as a function of itself ( e.g., MOVF PORTB, 1), the value used will be that value present
on the pins themselves. For example, if the data latch is '1' for a pin configured as input and is driven low by an external
device, the data will be written back with a '0'.
2: If this instruction is executed on the TMR0 register (and, where applicable, d = 1), the prescaler will be cleared if assigned
to the Timer0 Module.
3: If Program Counter (PC) is modified or a conditional test is true, the instruction requires two cycles. The second cycle is
executed as a NOP.
DS30272A-page 70
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
9.1
Instruction Descriptions
ADDLW
Add Literal and W
ANDLW
AND Literal with W
Syntax:
[label] ADDLW
Syntax:
[label] ANDLW
Operands:
0 ≤ k ≤ 255
Operands:
0 ≤ k ≤ 255
Operation:
(W) + k → (W)
Operation:
(W) .AND. (k) → (W)
C, DC, Z
Status Affected:
Z
Status Affected:
Encoding:
11
k
111x
kkkk
kkkk
Encoding:
11
k
1001
kkkk
kkkk
Description:
The contents of the W register are
added to the eight bit literal 'k' and the
result is placed in the W register.
Description:
The contents of W register are
AND’ed with the eight bit literal 'k'. The
result is placed in the W register.
Words:
1
Words:
1
1
Cycles:
1
Cycles:
Q Cycle Activity:
Example:
Q1
Q2
Q3
Q4
Decode
Read
literal 'k'
Process
data
Write to
W
ADDLW
0x15
Q Cycle Activity:
Example
=
=
ADDWF
Add W and f
Syntax:
[label] ADDWF
Operands:
Q3
Q4
Decode
Read
literal "k"
Process
data
Write to
W
ANDLW
0x5F
W
0x10
=
0xA3
After Instruction
After Instruction
W
Q2
Before Instruction
Before Instruction
W
Q1
W
0x25
=
0x03
ANDWF
AND W with f
Syntax:
[label] ANDWF
0 ≤ f ≤ 127
d ∈ [0,1]
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operation:
(W) + (f) → (dest)
Operation:
(W) .AND. (f) → (dest)
Status Affected:
C, DC, Z
Status Affected:
Z
Encoding:
Description:
00
f,d
0111
dfff
ffff
Encoding:
00
f,d
0101
dfff
ffff
Add the contents of the W register
with register 'f'. If 'd' is 0 the result is
stored in the W register. If 'd' is 1 the
result is stored back in register 'f'.
Description:
AND the W register with register 'f'. If
'd' is 0 the result is stored in the W
register. If 'd' is 1 the result is stored
back in register 'f'.
Words:
1
Words:
1
Cycles:
1
Cycles:
1
Q Cycle Activity:
Example
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
Dest
ADDWF
FSR, 0
Before Instruction
W =
FSR =
1997 Microchip Technology Inc.
Example
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
Dest
ANDWF
FSR, 1
Before Instruction
0x17
0xC2
After Instruction
W =
FSR =
Q Cycle Activity:
W =
FSR =
0x17
0xC2
After Instruction
0xD9
0xC2
Powered by ICminer.com Electronic-Library Service CopyRight 2003
W =
FSR =
0x17
0x02
DS30272A-page 71
PIC16C71X
BCF
Bit Clear f
BTFSC
Bit Test, Skip if Clear
Syntax:
[label] BCF
Syntax:
[label] BTFSC f,b
Operands:
0 ≤ f ≤ 127
0≤b≤7
Operands:
0 ≤ f ≤ 127
0≤b≤7
Operation:
0 → (f<b>)
Operation:
skip if (f<b>) = 0
Status Affected:
None
Status Affected:
None
Encoding:
01
f,b
00bb
bfff
ffff
Description:
Bit 'b' in register 'f' is cleared.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write
register 'f'
BCF
Encoding:
10bb
bfff
ffff
Description:
Words:
1
Cycles:
1(2)
Q Cycle Activity:
FLAG_REG, 7
01
If bit 'b' in register 'f' is '1' then the next
instruction is executed.
If bit 'b', in register 'f', is '0' then the next
instruction is discarded, and a NOP is
executed instead, making this a 2TCY
instruction.
Before Instruction
Q1
Q2
Q3
Q4
Decode
Read
register 'f'
Process
data
NOP
Q3
Q4
NOP
NOP
FLAG_REG = 0xC7
If Skip:
After Instruction
FLAG_REG = 0x47
Example
(2nd Cycle)
Q1
Q2
NOP
NOP
HERE
FALSE
TRUE
BTFSC
GOTO
•
•
•
FLAG,1
PROCESS_CODE
Before Instruction
PC =
address HERE
After Instruction
BSF
if FLAG<1> = 0,
PC =
address TRUE
if FLAG<1>=1,
PC =
address FALSE
Bit Set f
Syntax:
[label] BSF
Operands:
0 ≤ f ≤ 127
0≤b≤7
Operation:
1 → (f<b>)
Status Affected:
None
Encoding:
01
f,b
01bb
bfff
Description:
Bit 'b' in register 'f' is set.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
ffff
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write
register 'f'
BSF
FLAG_REG,
7
Before Instruction
FLAG_REG = 0x0A
After Instruction
FLAG_REG = 0x8A
DS30272A-page 72
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
BTFSS
Bit Test f, Skip if Set
CALL
Call Subroutine
Syntax:
[label] BTFSS f,b
Syntax:
[ label ] CALL k
Operands:
0 ≤ f ≤ 127
0≤b<7
Operands:
0 ≤ k ≤ 2047
Operation:
Operation:
skip if (f<b>) = 1
Status Affected:
None
(PC)+ 1→ TOS,
k → PC<10:0>,
(PCLATH<4:3>) → PC<12:11>
Status Affected:
None
Encoding:
Description:
01
1
Cycles:
1(2)
If Skip:
Example
bfff
ffff
If bit 'b' in register 'f' is '0' then the next
instruction is executed.
If bit 'b' is '1', then the next instruction is
discarded and a NOP is executed
instead, making this a 2TCY instruction.
Words:
Q Cycle Activity:
11bb
Q1
Q2
Q3
Q4
Decode
Read
register 'f'
Process
data
NOP
(2nd Cycle)
Q1
Q2
NOP
NOP
HERE
FALSE
TRUE
BTFSC
GOTO
•
•
•
Q3
Q4
NOP
NOP
FLAG,1
PROCESS_CODE
10
0kkk
kkkk
kkkk
Description:
Call Subroutine. First, return address
(PC+1) is pushed onto the stack. The
eleven bit immediate address is loaded
into PC bits <10:0>. The upper bits of
the PC are loaded from PCLATH.
CALL is a two cycle instruction.
Words:
1
Cycles:
2
Q Cycle Activity:
Q1
Q2
Q3
Q4
1st Cycle
Decode
Read
literal 'k',
Push PC
to Stack
Process
data
Write to
PC
2nd Cycle
NOP
NOP
NOP
NOP
HERE
CALL
THERE
Example
Before Instruction
PC = Address HERE
After Instruction
Before Instruction
PC =
Encoding:
address HERE
PC = Address THERE
TOS = Address HERE+1
After Instruction
if FLAG<1> = 0,
PC =
address FALSE
if FLAG<1> = 1,
PC =
address TRUE
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 73
PIC16C71X
CLRF
Clear f
Syntax:
[label] CLRF
Operands:
0 ≤ f ≤ 127
Operation:
00h → (f)
1→Z
Status Affected:
Z
Encoding:
00
f
0001
1fff
ffff
CLRW
Clear W
Syntax:
[ label ] CLRW
Operands:
None
Operation:
00h → (W)
1→Z
Status Affected:
Z
Encoding:
00
0001
0xxx
xxxx
Description:
The contents of register 'f' are cleared
and the Z bit is set.
Description:
W register is cleared. Zero bit (Z) is
set.
Words:
1
Words:
1
Cycles:
1
Cycles:
1
Q Cycle Activity:
Example
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write
register 'f'
CLRF
Q Cycle Activity:
Example
FLAG_REG
=
0x5A
Q3
Q4
Process
data
Write to
W
CLRW
=
=
0x00
1
W
=
0x5A
After Instruction
After Instruction
FLAG_REG
Z
Q2
NOP
Before Instruction
Before Instruction
FLAG_REG
Q1
Decode
W
Z
=
=
0x00
1
CLRWDT
Clear Watchdog Timer
Syntax:
[ label ] CLRWDT
Operands:
None
Operation:
00h → WDT
0 → WDT prescaler,
1 → TO
1 → PD
Status Affected:
TO, PD
Encoding:
00
0000
0110
0100
Description:
CLRWDT instruction resets the Watchdog Timer. It also resets the prescaler
of the WDT. Status bits TO and PD
are set.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
Q1
Q2
Q3
Q4
Decode
NOP
Process
data
Clear
WDT
Counter
CLRWDT
Before Instruction
WDT counter =
?
After Instruction
WDT counter =
WDT prescaler=
TO
=
PD
=
DS30272A-page 74
Powered by ICminer.com Electronic-Library Service CopyRight 2003
0x00
0
1
1
1997 Microchip Technology Inc.
PIC16C71X
COMF
Complement f
Syntax:
[ label ] COMF
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operation:
(f) → (dest)
Status Affected:
Z
Encoding:
00
f,d
1001
dfff
ffff
Description:
The contents of register 'f' are complemented. If 'd' is 0 the result is stored in
W. If 'd' is 1 the result is stored back in
register 'f'.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
DECFSZ
Decrement f, Skip if 0
Syntax:
[ label ] DECFSZ f,d
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operation:
(f) - 1 → (dest);
Status Affected:
None
Encoding:
00
Q2
Q3
Q4
Words:
1
Read
register
'f'
Process
data
Write to
dest
Cycles:
1(2)
Q Cycle Activity:
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
Before Instruction
0x13
=
=
0x13
0xEC
If Skip:
After Instruction
REG1
W
(2nd Cycle)
Q1
Q2
NOP
NOP
DECF
Decrement f
Syntax:
[label] DECF f,d
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operation:
(f) - 1 → (dest)
Before Instruction
Status Affected:
Z
After Instruction
Encoding:
00
Example
dfff
ffff
Description:
Decrement register 'f'. If 'd' is 0 the
result is stored in the W register. If 'd'
is 1 the result is stored back in register
'f'.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
DECF
HERE
DECFSZ
GOTO
CONTINUE •
•
•
PC
0011
ffff
Q1
REG1,0
=
dfff
Description:
Q1
REG1
1011
The contents of register 'f' are decremented. If 'd' is 0 the result is placed in
the W register. If 'd' is 1 the result is
placed back in register 'f'.
If the result is 1, the next instruction, is
executed. If the result is 0, then a NOP is
executed instead making it a 2TCY
instruction.
Decode
COMF
skip if result = 0
CNT
if CNT
PC
if CNT
PC
=
=
=
=
≠
=
Q3
Q4
NOP
NOP
CNT, 1
LOOP
address HERE
CNT - 1
0,
address CONTINUE
0,
address HERE+1
CNT, 1
Before Instruction
CNT
Z
=
=
0x01
0
=
=
0x00
1
After Instruction
CNT
Z
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 75
PIC16C71X
GOTO
Unconditional Branch
INCF
Increment f
Syntax:
[ label ]
Syntax:
[ label ]
Operands:
0 ≤ k ≤ 2047
Operands:
Operation:
k → PC<10:0>
PCLATH<4:3> → PC<12:11>
0 ≤ f ≤ 127
d ∈ [0,1]
Operation:
(f) + 1 → (dest)
None
Status Affected:
Z
Status Affected:
Encoding:
10
GOTO k
1kkk
kkkk
kkkk
Encoding:
00
INCF f,d
1010
dfff
ffff
Description:
GOTO is an unconditional branch. The
eleven bit immediate value is loaded
into PC bits <10:0>. The upper bits of
PC are loaded from PCLATH<4:3>.
GOTO is a two cycle instruction.
Description:
The contents of register 'f' are incremented. If 'd' is 0 the result is placed
in the W register. If 'd' is 1 the result is
placed back in register 'f'.
Words:
1
Words:
1
Cycles:
2
Cycles:
1
Q Cycle Activity:
Q1
Q2
Q3
Q4
1st Cycle
Decode
Read
literal 'k'
Process
data
Write to
PC
2nd Cycle
NOP
NOP
NOP
NOP
Q Cycle Activity:
Example
Example
GOTO THERE
Q2
Q3
Q4
Read
register
'f'
Process
data
Write to
dest
INCF
CNT, 1
Before Instruction
After Instruction
PC =
Q1
Decode
Address THERE
CNT
Z
=
=
0xFF
0
=
=
0x00
1
After Instruction
CNT
Z
DS30272A-page 76
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
INCFSZ
Increment f, Skip if 0
IORLW
Inclusive OR Literal with W
Syntax:
[ label ]
Syntax:
[ label ]
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operands:
0 ≤ k ≤ 255
Operation:
(f) + 1 → (dest), skip if result = 0
(W) .OR. k → (W)
Operation:
Status Affected:
Z
Status Affected:
None
Encoding:
Encoding:
Description:
00
1111
dfff
ffff
The contents of register 'f' are incremented. If 'd' is 0 the result is placed
in the W register. If 'd' is 1 the result is
placed back in register 'f'.
If the result is 1, the next instruction is
executed. If the result is 0, a NOP is
executed instead making it a 2TCY
instruction.
Words:
1
Cycles:
1(2)
Q Cycle Activity:
INCFSZ f,d
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
11
IORLW k
1000
kkkk
kkkk
Description:
The contents of the W register is
OR’ed with the eight bit literal 'k'. The
result is placed in the W register.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
Q1
Q2
Q3
Q4
Decode
Read
literal 'k'
Process
data
Write to
W
IORLW
0x35
Before Instruction
W
=
0x9A
After Instruction
If Skip:
(2nd Cycle)
Q1
Q2
NOP
Example
NOP
Q3
Q4
NOP
NOP
HERE
INCFSZ
GOTO
CONTINUE •
•
•
W
Z
=
=
0xBF
1
CNT, 1
LOOP
Before Instruction
PC
=
address HERE
After Instruction
CNT =
if CNT=
PC
=
if CNT≠
PC
=
1997 Microchip Technology Inc.
CNT + 1
0,
address CONTINUE
0,
address HERE +1
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 77
PIC16C71X
IORWF
Inclusive OR W with f
MOVLW
Move Literal to W
Syntax:
[ label ]
Syntax:
[ label ]
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operands:
0 ≤ k ≤ 255
Operation:
(W) .OR. (f) → (dest)
Operation:
k → (W)
Status Affected:
Z
Status Affected:
None
Encoding:
IORWF
00
f,d
0100
dfff
ffff
Description:
Inclusive OR the W register with register 'f'. If 'd' is 0 the result is placed in
the W register. If 'd' is 1 the result is
placed back in register 'f'.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
Encoding:
11
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
IORWF
00xx
kkkk
kkkk
Description:
The eight bit literal 'k' is loaded into W
register. The don’t cares will assemble
as 0’s.
Words:
1
Cycles:
1
Q Cycle Activity:
Q1
MOVLW k
Example
Q1
Q2
Q3
Q4
Decode
Read
literal 'k'
Process
data
Write to
W
MOVLW
0x5A
After Instruction
RESULT, 0
W
=
0x5A
Before Instruction
RESULT =
W
=
0x13
0x91
After Instruction
RESULT =
W
=
Z
=
MOVF
0x13
0x93
1
Move f
MOVWF
Move W to f
Syntax:
[ label ]
MOVWF
Syntax:
[ label ]
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operands:
0 ≤ f ≤ 127
Operation:
(W) → (f)
(f) → (dest)
Status Affected:
None
Z
Encoding:
Operation:
Status Affected:
Encoding:
Description:
00
1
Cycles:
1
Example
1000
dfff
ffff
The contents of register f is moved to
a destination dependant upon the status of d. If d = 0, destination is W register. If d = 1, the destination is file
register f itself. d = 1 is useful to test a
file register since status flag Z is
affected.
Words:
Q Cycle Activity:
MOVF f,d
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
MOVF
FSR, 0
0000
1fff
ffff
Description:
Move data from W register to register
'f'.
Words:
1
Cycles:
1
Q Cycle Activity:
Example
Q1
00
f
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write
register 'f'
MOVWF
OPTION_REG
Before Instruction
OPTION =
W
=
0xFF
0x4F
After Instruction
OPTION =
W
=
0x4F
0x4F
After Instruction
W = value in FSR register
Z =1
DS30272A-page 78
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
NOP
No Operation
RETFIE
Return from Interrupt
Syntax:
[ label ]
Syntax:
[ label ]
Operands:
None
Operands:
None
Operation:
No operation
Operation:
Status Affected:
None
TOS → PC,
1 → GIE
Status Affected:
None
Encoding:
00
NOP
0000
0xx0
0000
RETFIE
Description:
No operation.
Encoding:
Words:
1
Description:
Cycles:
1
Return from Interrupt. Stack is POPed
and Top of Stack (TOS) is loaded in
the PC. Interrupts are enabled by setting Global Interrupt Enable bit, GIE
(INTCON<7>). This is a two cycle
instruction.
Words:
1
Cycles:
2
Q Cycle Activity:
Example
Q1
Q2
Q3
Q4
Decode
NOP
NOP
NOP
NOP
Q Cycle Activity:
00
0000
0000
1001
Q1
Q2
Q3
Q4
1st Cycle
Decode
NOP
Set the
GIE bit
Pop from
the Stack
2nd Cycle
NOP
NOP
NOP
NOP
Example
RETFIE
After Interrupt
PC =
GIE =
OPTION
Load Option Register
Syntax:
[ label ]
Operands:
None
Operation:
(W) → OPTION
TOS
1
OPTION
Status Affected: None
Encoding:
00
0000
0110
0010
Description:
The contents of the W register are
loaded in the OPTION register. This
instruction is supported for code compatibility with PIC16C5X products.
Since OPTION is a readable/writable
register, the user can directly address
it.
Words:
1
Cycles:
1
Example
To maintain upward compatibility
with future PIC16CXX products, do
not use this instruction.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 79
PIC16C71X
RETLW
Return with Literal in W
Syntax:
[ label ]
Syntax:
[ label ]
Operands:
0 ≤ k ≤ 255
Operands:
None
Operation:
k → (W);
TOS → PC
Operation:
TOS → PC
Status Affected:
None
Status Affected:
None
Encoding:
RETLW k
01xx
kkkk
kkkk
The W register is loaded with the eight
bit literal 'k'. The program counter is
loaded from the top of the stack (the
return address). This is a two cycle
instruction.
Words:
1
Cycles:
2
Q Cycle Activity:
Return from Subroutine
Encoding:
11
Description:
RETURN
Q2
Q3
Q4
1st Cycle
Decode
Read
literal 'k'
NOP
Write to
W, Pop
from the
Stack
2nd Cycle
NOP
NOP
NOP
NOP
0000
CALL TABLE
Words:
1
Cycles:
2
Q1
Q2
Q3
Q4
1st Cycle
Decode
NOP
NOP
Pop from
the Stack
2nd Cycle
NOP
NOP
NOP
NOP
Example
RETURN
After Interrupt
TOS
;W contains table
;offset value
;W now has table value
•
•
•
TABLE ADDWF PC
RETLW k1
RETLW k2
1000
Return from subroutine. The stack is
POPed and the top of the stack (TOS)
is loaded into the program counter.
This is a two cycle instruction.
PC =
Example
0000
Description:
Q Cycle Activity:
Q1
00
RETURN
;W = offset
;Begin table
;
•
•
•
RETLW kn
; End of table
Before Instruction
W
=
0x07
After Instruction
W
=
value of k8
DS30272A-page 80
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
RLF
Rotate Left f through Carry
Syntax:
[ label ]
Syntax:
[ label ]
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operation:
See description below
Operation:
See description below
Status Affected:
C
Status Affected:
C
Encoding:
Description:
RLF
00
RRF
f,d
1101
dfff
ffff
The contents of register 'f' are rotated
one bit to the left through the Carry
Flag. If 'd' is 0 the result is placed in
the W register. If 'd' is 1 the result is
stored back in register 'f'.
C
Rotate Right f through Carry
Encoding:
Description:
00
Register f
C
1
Words:
1
Cycles:
1
Cycles:
1
Example
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
RLF
REG1,0
1997 Microchip Technology Inc.
dfff
ffff
Register f
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
RRF
REG1,0
Before Instruction
=
=
1110 0110
0
=
=
=
1110 0110
1100 1100
1
After Instruction
REG1
W
C
Q Cycle Activity:
Example
Before Instruction
REG1
C
1100
The contents of register 'f' are rotated
one bit to the right through the Carry
Flag. If 'd' is 0 the result is placed in
the W register. If 'd' is 1 the result is
placed back in register 'f'.
Words:
Q Cycle Activity:
RRF f,d
REG1
C
=
=
1110 0110
0
=
=
=
1110 0110
0111 0011
0
After Instruction
Powered by ICminer.com Electronic-Library Service CopyRight 2003
REG1
W
C
DS30272A-page 81
PIC16C71X
SLEEP
SUBLW
Subtract W from Literal
Syntax:
[ label ]
SUBLW k
Syntax:
[ label ]
Operands:
None
Operands:
0 ≤ k ≤ 255
Operation:
00h → WDT,
0 → WDT prescaler,
1 → TO,
0 → PD
Operation:
k - (W) → (W)
Status Affected:
C, DC, Z
Status Affected:
SLEEP
Encoding:
Description:
TO, PD
Encoding:
00
0000
0110
0011
11
Words:
1
Cycles:
1
Words:
1
Example 1:
Cycles:
1
Q Cycle Activity:
Q Cycle Activity:
kkkk
kkkk
The W register is subtracted (2’s complement method) from the eight bit literal 'k'.
The result is placed in the W register.
The power-down status bit, PD is
cleared. Time-out status bit, TO is
set. Watchdog Timer and its prescaler are cleared.
The processor is put into SLEEP
mode with the oscillator stopped.
See Section 8.8 for more details.
Description:
110x
Q1
Q2
Q3
Q4
Decode
Read
literal 'k'
Process
data
Write to W
SUBLW
0x02
Before Instruction
Q1
Q2
Q3
Q4
Decode
NOP
NOP
Go to
Sleep
W
C
Z
=
=
=
1
?
?
After Instruction
Example:
SLEEP
W
C
Z
Example 2:
=
=
=
1
1; result is positive
0
Before Instruction
W
C
Z
=
=
=
2
?
?
After Instruction
W
C
Z
Example 3:
=
=
=
0
1; result is zero
1
Before Instruction
W
C
Z
=
=
=
3
?
?
After Instruction
W =
C
=
tive
Z
=
DS30272A-page 82
Powered by ICminer.com Electronic-Library Service CopyRight 2003
0xFF
0; result is nega0
1997 Microchip Technology Inc.
PIC16C71X
SUBWF
Subtract W from f
SWAPF
Swap Nibbles in f
Syntax:
[ label ]
Syntax:
[ label ] SWAPF f,d
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operands:
0 ≤ f ≤ 127
d ∈ [0,1]
Operation:
(f) - (W) → (dest)
Operation:
(f<3:0>) → (dest<7:4>),
(f<7:4>) → (dest<3:0>)
Status Affected:
None
SUBWF f,d
Status Affected: C, DC, Z
Encoding:
Description:
00
1
Cycles:
1
Example 1:
dfff
ffff
Subtract (2’s complement method) W register from register 'f'. If 'd' is 0 the result is
stored in the W register. If 'd' is 1 the
result is stored back in register 'f'.
Words:
Q Cycle Activity:
0010
Q1
Q2
Q3
Q4
Decode
Read
register 'f'
Process
data
Write to
dest
SUBWF
Encoding:
00
REG1
W
C
Z
ffff
Words:
1
Cycles:
1
Q Cycle Activity:
Q1
Q2
Q3
Q4
Decode
Read
register 'f'
Process
data
Write to
dest
Example
=
=
=
=
SWAPF REG,
REG1
W
C
Z
=
=
=
=
REG1
=
=
=
=
=
=
=
=
2
2
?
?
=
=
=
=
1997 Microchip Technology Inc.
=
=
=
=
0xA5
0x5A
Load TRIS Register
Syntax:
[label]
Operands:
5≤f≤7
Operation:
(W) → TRIS register f;
TRIS
f
Status Affected: None
0
2
1; result is zero
1
1
2
?
?
After Instruction
REG1
W
C
Z
=
=
TRIS
Encoding:
0xFF
2
0; result is negative
0
Powered by ICminer.com Electronic-Library Service CopyRight 2003
00
0000
0110
0fff
Description:
The instruction is supported for code
compatibility with the PIC16C5X products. Since TRIS registers are readable and writable, the user can directly
address them.
Words:
1
Cycles:
1
Before Instruction
REG1
W
C
Z
0xA5
1
2
1; result is positive
0
After Instruction
REG1
W
C
Z
=
After Instruction
REG1
W
Before Instruction
REG1
W
C
Z
0
Before Instruction
3
2
?
?
After Instruction
Example 3:
dfff
The upper and lower nibbles of register 'f' are exchanged. If 'd' is 0 the
result is placed in W register. If 'd' is 1
the result is placed in register 'f'.
REG1,1
Before Instruction
Example 2:
1110
Description:
Example
To maintain upward compatibility
with future PIC16CXX products, do
not use this instruction.
DS30272A-page 83
PIC16C71X
XORLW
Exclusive OR Literal with W
XORWF
Exclusive OR W with f
Syntax:
[label]
Syntax:
[label]
Operands:
0 ≤ k ≤ 255
Operands:
Operation:
(W) .XOR. k → (W)
0 ≤ f ≤ 127
d ∈ [0,1]
Status Affected:
Z
Operation:
(W) .XOR. (f) → (dest)
Status Affected:
Z
Encoding:
Description:
11
1
Cycles:
1
Example:
1010
kkkk
kkkk
The contents of the W register are
XOR’ed with the eight bit literal 'k'.
The result is placed in the W register.
Words:
Q Cycle Activity:
XORLW k
Q1
Q2
Q3
Q4
Decode
Read
literal 'k'
Process
data
Write to
W
XORLW
Encoding:
00
XORWF
0110
f,d
dfff
ffff
Description:
Exclusive OR the contents of the W
register with register 'f'. If 'd' is 0 the
result is stored in the W register. If 'd'
is 1 the result is stored back in register
'f'.
Words:
1
Cycles:
1
Q Cycle Activity:
Q1
Q2
Q3
Q4
Decode
Read
register
'f'
Process
data
Write to
dest
0xAF
Before Instruction
W
=
0xB5
=
XORWF
REG
1
Before Instruction
After Instruction
W
Example
0x1A
REG
W
=
=
0xAF
0xB5
=
=
0x1A
0xB5
After Instruction
REG
W
DS30272A-page 84
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
10.0
DEVELOPMENT SUPPORT
10.1
Development Tools
The PICmicrο microcontrollers are supported with a
full range of hardware and software development tools:
• PICMASTER/PICMASTER CE Real-Time
In-Circuit Emulator
• ICEPIC Low-Cost PIC16C5X and PIC16CXXX
In-Circuit Emulator
• PRO MATE II Universal Programmer
• PICSTART Plus Entry-Level Prototype
Programmer
• PICDEM-1 Low-Cost Demonstration Board
• PICDEM-2 Low-Cost Demonstration Board
• PICDEM-3 Low-Cost Demonstration Board
• MPASM Assembler
• MPLAB SIM Software Simulator
• MPLAB-C (C Compiler)
• Fuzzy Logic Development System
(fuzzyTECH−MP)
10.2
PICMASTER: High Performance
Universal In-Circuit Emulator with
MPLAB IDE
The PICMASTER Universal In-Circuit Emulator is
intended to provide the product development engineer
with a complete microcontroller design tool set for all
microcontrollers in the PIC12CXXX, PIC14C000,
PIC16C5X, PIC16CXXX and PIC17CXX families.
PICMASTER is supplied with the MPLAB Integrated
Development Environment (IDE), which allows editing,
“make” and download, and source debugging from a
single environment.
Interchangeable target probes allow the system to be
easily reconfigured for emulation of different processors. The universal architecture of the PICMASTER
allows expansion to support all new Microchip microcontrollers.
10.3
ICEPIC: Low-Cost PIC16CXXX
In-Circuit Emulator
ICEPIC is a low-cost in-circuit emulator solution for the
Microchip PIC16C5X and PIC16CXXX families of 8-bit
OTP microcontrollers.
ICEPIC is designed to operate on PC-compatible
machines ranging from 286-AT through Pentium
based machines under Windows 3.x environment.
ICEPIC features real time, non-intrusive emulation.
10.4
PRO MATE II: Universal Programmer
The PRO MATE II Universal Programmer is a full-featured programmer capable of operating in stand-alone
mode as well as PC-hosted mode.
The PRO MATE II has programmable VDD and VPP
supplies which allows it to verify programmed memory
at VDD min and VDD max for maximum reliability. It has
an LCD display for displaying error messages, keys to
enter commands and a modular detachable socket
assembly to support various package types. In standalone mode the PRO MATE II can read, verify or program
PIC12CXXX,
PIC14C000,
PIC16C5X,
PIC16CXXX and PIC17CXX devices. It can also set
configuration and code-protect bits in this mode.
10.5
PICSTART Plus Entry Level
Development System
The PICSTART programmer is an easy-to-use, lowcost prototype programmer. It connects to the PC via
one of the COM (RS-232) ports. MPLAB Integrated
Development Environment software makes using the
programmer simple and efficient. PICSTART Plus is
not recommended for production programming.
PICSTART Plus supports all PIC12CXXX, PIC14C000,
PIC16C5X, PIC16CXXX and PIC17CXX devices with
up to 40 pins. Larger pin count devices such as the
PIC16C923 and PIC16C924 may be supported with an
adapter socket.
The PICMASTER Emulator System has been
designed as a real-time emulation system with
advanced features that are generally found on more
expensive development tools. The PC compatible 386
(and higher) machine platform and Microsoft Windows
3.x environment were chosen to best make these features available to you, the end user.
A CE compliant version of PICMASTER is available for
European Union (EU) countries.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 85
PIC16C71X
10.6
PICDEM-1 Low-Cost PIC16/17
Demonstration Board
The PICDEM-1 is a simple board which demonstrates
the capabilities of several of Microchip’s microcontrollers. The microcontrollers supported are: PIC16C5X
(PIC16C54 to PIC16C58A), PIC16C61, PIC16C62X,
PIC16C71, PIC16C8X, PIC17C42, PIC17C43 and
PIC17C44. All necessary hardware and software is
included to run basic demo programs. The users can
program the sample microcontrollers provided with
the PICDEM-1 board, on a PRO MATE II or
PICSTART-Plus programmer, and easily test firmware. The user can also connect the PICDEM-1
board to the PICMASTER emulator and download
the firmware to the emulator for testing. Additional prototype area is available for the user to build some additional hardware and connect it to the microcontroller
socket(s). Some of the features include an RS-232
interface, a potentiometer for simulated analog input,
push-button switches and eight LEDs connected to
PORTB.
10.7
PICDEM-2 Low-Cost PIC16CXX
Demonstration Board
The PICDEM-2 is a simple demonstration board that
supports the PIC16C62, PIC16C64, PIC16C65,
PIC16C73 and PIC16C74 microcontrollers. All the
necessary hardware and software is included to
run the basic demonstration programs. The user
can program the sample microcontrollers provided
with the PICDEM-2 board, on a PRO MATE II programmer or PICSTART-Plus, and easily test firmware.
The PICMASTER emulator may also be used with the
PICDEM-2 board to test firmware. Additional prototype
area has been provided to the user for adding additional hardware and connecting it to the microcontroller
socket(s). Some of the features include a RS-232 interface, push-button switches, a potentiometer for simulated analog input, a Serial EEPROM to demonstrate
usage of the I2C bus and separate headers for connection to an LCD module and a keypad.
10.8
PICDEM-3 Low-Cost PIC16CXXX
Demonstration Board
The PICDEM-3 is a simple demonstration board that
supports the PIC16C923 and PIC16C924 in the PLCC
package. It will also support future 44-pin PLCC
microcontrollers with a LCD Module. All the necessary hardware and software is included to run the
basic demonstration programs. The user can program the sample microcontrollers provided with
the PICDEM-3 board, on a PRO MATE II programmer or PICSTART Plus with an adapter socket, and
easily test firmware. The PICMASTER emulator may
also be used with the PICDEM-3 board to test firmware. Additional prototype area has been provided to
the user for adding hardware and connecting it to the
microcontroller socket(s). Some of the features include
DS30272A-page 86
Powered by ICminer.com Electronic-Library Service CopyRight 2003
an RS-232 interface, push-button switches, a potentiometer for simulated analog input, a thermistor and
separate headers for connection to an external LCD
module and a keypad. Also provided on the PICDEM-3
board is an LCD panel, with 4 commons and 12 segments, that is capable of displaying time, temperature
and day of the week. The PICDEM-3 provides an additional RS-232 interface and Windows 3.1 software for
showing the demultiplexed LCD signals on a PC. A simple serial interface allows the user to construct a hardware demultiplexer for the LCD signals.
10.9
MPLAB Integrated Development
Environment Software
The MPLAB IDE Software brings an ease of software
development previously unseen in the 8-bit microcontroller market. MPLAB is a windows based application
which contains:
• A full featured editor
• Three operating modes
- editor
- emulator
- simulator
• A project manager
• Customizable tool bar and key mapping
• A status bar with project information
• Extensive on-line help
MPLAB allows you to:
• Edit your source files (either assembly or ‘C’)
• One touch assemble (or compile) and download
to PIC16/17 tools (automatically updates all
project information)
• Debug using:
- source files
- absolute listing file
• Transfer data dynamically via DDE (soon to be
replaced by OLE)
• Run up to four emulators on the same PC
The ability to use MPLAB with Microchip’s simulator
allows a consistent platform and the ability to easily
switch from the low cost simulator to the full featured
emulator with minimal retraining due to development
tools.
10.10
Assembler (MPASM)
The MPASM Universal Macro Assembler is a PChosted symbolic assembler. It supports all microcontroller series including the PIC12C5XX, PIC14000,
PIC16C5X, PIC16CXXX, and PIC17CXX families.
MPASM offers full featured Macro capabilities, conditional assembly, and several source and listing formats.
It generates various object code formats to support
Microchip's development tools as well as third party
programmers.
MPASM allows full symbolic debugging from
PICMASTER, Microchip’s Universal Emulator
System.
1997 Microchip Technology Inc.
PIC16C71X
MPASM has the following features to assist in developing software for specific use applications.
• Provides translation of Assembler source code to
object code for all Microchip microcontrollers.
• Macro assembly capability.
• Produces all the files (Object, Listing, Symbol,
and special) required for symbolic debug with
Microchip’s emulator systems.
• Supports Hex (default), Decimal and Octal source
and listing formats.
MPASM provides a rich directive language to support
programming of the PIC16/17. Directives are helpful in
making the development of your assemble source code
shorter and more maintainable.
10.11
Software Simulator (MPLAB-SIM)
The MPLAB-SIM Software Simulator allows code
development in a PC host environment. It allows the
user to simulate the PIC16/17 series microcontrollers
on an instruction level. On any given instruction, the
user may examine or modify any of the data areas or
provide external stimulus to any of the pins. The input/
output radix can be set by the user and the execution
can be performed in; single step, execute until break, or
in a trace mode.
MPLAB-SIM fully supports symbolic debugging using
MPLAB-C and MPASM. The Software Simulator offers
the low cost flexibility to develop and debug code outside of the laboratory environment making it an excellent multi-project software development tool.
10.12
C Compiler (MPLAB-C)
10.14
MP-DriveWay – Application Code
Generator
MP-DriveWay is an easy-to-use Windows-based Application Code Generator. With MP-DriveWay you can
visually configure all the peripherals in a PIC16/17
device and, with a click of the mouse, generate all the
initialization and many functional code modules in C
language. The output is fully compatible with Microchip’s MPLAB-C C compiler. The code produced is
highly modular and allows easy integration of your own
code. MP-DriveWay is intelligent enough to maintain
your code through subsequent code generation.
10.15
SEEVAL Evaluation and
Programming System
The SEEVAL SEEPROM Designer’s Kit supports all
Microchip 2-wire and 3-wire Serial EEPROMs. The kit
includes everything necessary to read, write, erase or
program special features of any Microchip SEEPROM
product including Smart Serials and secure serials.
The Total Endurance Disk is included to aid in tradeoff analysis and reliability calculations. The total kit can
significantly reduce time-to-market and result in an
optimized system.
10.16
KEELOQ Evaluation and
Programming Tools
KEELOQ evaluation and programming tools support
Microchips HCS Secure Data Products. The HCS evaluation kit includes an LCD display to show changing
codes, a decoder to decode transmissions, and a programming interface to program test transmitters.
The MPLAB-C Code Development System is a
complete ‘C’ compiler and integrated development
environment for Microchip’s PIC16/17 family of microcontrollers. The compiler provides powerful integration
capabilities and ease of use not found with other
compilers.
For easier source level debugging, the compiler provides symbol information that is compatible with the
MPLAB IDE memory display.
10.13
Fuzzy Logic Development System
(fuzzyTECH-MP)
fuzzyTECH-MP fuzzy logic development tool is available in two versions - a low cost introductory version,
MP Explorer, for designers to gain a comprehensive
working knowledge of fuzzy logic system design; and a
full-featured version, fuzzyTECH-MP, edition for implementing more complex systems.
Both versions include Microchip’s fuzzyLAB demonstration board for hands-on experience with fuzzy logic
systems implementation.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 87
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 88
Emulator Products
Software Tools
Programmers
✔
KEELOQ
Evaluation Kit
PICDEM-3
PICDEM-2
PICDEM-1
SEEVAL
Designers Kit
KEELOQ
Programmer
PRO MATE II
Universal
Programmer
PICSTART
Plus Low-Cost
Universal Dev. Kit
PICSTART
Lite Ultra Low-Cost
Dev. Kit
Total Endurance
Software Model
✔
✔
✔
fuzzyTECH-MP
Explorer/Edition
Fuzzy Logic
Dev. Tool
MP-DriveWay
Applications
Code Generator
✔
MPLAB C
Compiler
✔
✔
MPLAB
Integrated
Development
Environment
ICEPIC Low-Cost
In-Circuit Emulator
PICMASTER/
PICMASTER-CE
In-Circuit Emulator
✔
✔
✔
✔
✔
✔
PIC14000
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PIC16C5X
✔
✔
✔
✔
✔
✔
✔
✔
✔
PIC16CXXX
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PIC16C6X PIC16C7XX PIC16C8X PIC16C9XX PIC17C4X
✔
✔
✔
✔
Available
3Q97
PIC17C75X
✔
✔
✔
24CXX
25CXX
93CXX
✔
✔
✔
HCS200
HCS300
HCS301
TABLE 10-1:
Demo Boards
PIC12C5XX
PIC16C71X
DEVELOPMENT TOOLS FROM MICROCHIP
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
11.0
710 71 711 715
ELECTRICAL CHARACTERISTICS FOR PIC16C710 AND PIC16C711
Absolute Maximum Ratings †
Ambient temperature under bias................................................................................................................. -55 to +125˚C
Storage temperature .............................................................................................................................. -65˚C to +150˚C
Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4).......................................... -0.3V to (VDD + 0.3V)
Voltage on VDD with respect to VSS ........................................................................................................... -0.3 to +7.5V
Voltage on MCLR with respect to VSS................................................................................................................0 to +14V
Voltage on RA4 with respect to Vss ...................................................................................................................0 to +14V
Total power dissipation (Note 1)................................................................................................................................1.0W
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin ..............................................................................................................................250 mA
Input clamp current, IIK (VI < 0 or VI > VDD).....................................................................................................................± 20 mA
Output clamp current, IOK (VO < 0 or VO > VDD) .............................................................................................................± 20 mA
Maximum output current sunk by any I/O pin..........................................................................................................25 mA
Maximum output current sourced by any I/O pin ....................................................................................................25 mA
Maximum current sunk by PORTA ........................................................................................................................200 mA
Maximum current sourced by PORTA ...................................................................................................................200 mA
Maximum current sunk by PORTB........................................................................................................................200 mA
Maximum current sourced by PORTB...................................................................................................................200 mA
Note 1: Power dissipation is calculated as follows: Pdis = VDD x {IDD - ∑ IOH} + ∑ {(VDD - VOH) x IOH} + ∑(VOl x IOL)
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 11-1:
OSC
RC
XT
HS
LP
CROSS REFERENCE OF DEVICE SPECS FOR OSCILLATOR CONFIGURATIONS
AND FREQUENCIES OF OPERATION (COMMERCIAL DEVICES)
PIC16C710-04
PIC16C711-04
VDD: 4.0V to 6.0V
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq:4 MHz max.
VDD: 4.0V to 6.0V
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 13.5 mA typ. at
5.5V
IPD: 1.5 µA typ. at 4.5V
Freq: 4 MHz max.
VDD: 4.0V to 6.0V
IDD: 52.5 µA typ. at
32 kHz, 4.0V
IPD: 0.9 µA typ. at 4.0V
Freq: 200 kHz max.
PIC16C710-10
PIC16C711-10
VDD: 4.5V to 5.5V
IDD: 2.7 mA typ. at 5.5V
IPD: 1.5 µA typ. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 2.7 mA typ. at 5.5V
IPD: 1.5 µA typ. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 30 mA max. at
5.5V
IPD: 1.5 µA typ. at 4.5V
Freq: 10 MHz max.
PIC16C710-20
PIC16C711-20
VDD: 4.5V to 5.5V
IDD: 2.7 mA typ. at 5.5V
IPD: 1.5 µA typ. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 2.7 mA typ. at 5.5V
IPD: 1.5 µA typ. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 30 mA max. at
5.5V
IPD: 1.5 µA typ. at 4.5V
Freq:20 MHz max.
Not recommended for
use in LP mode
Not recommended for
use in LP mode
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
PIC16LC710-04
PIC16LC711-04
VDD: 2.5V to 6.0V
IDD: 3.8 mA typ. at 3.0V
IPD: 5.0 µA typ. at 3V
Freq: 4 MHz max.
VDD: 2.5V to 6.0V
IDD: 3.8 mA typ. at 3.0V
IPD: 5.0 µA typ. at 3V
Freq: 4 MHz max.
PIC16C710/JW
PIC16C711/JW
VDD: 4.0V to 6.0V
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq:4 MHz max.
VDD: 4.0V to 6.0V
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 30 mA max. at
Not recommended for
5.5V
use in HS mode
IPD: 1.5 µA typ. at 4.5V
Freq: 10 MHz max.
VDD: 2.5V to 6.0V
VDD: 2.5V to 6.0V
IDD: 48 µA max. at
IDD: 48 µA max. at
32 kHz, 3.0V
32 kHz, 3.0V
IPD: 5.0 µA max. at 3.0V IPD: 5.0 µA max. at
Freq: 200 kHz max.
3.0V
Freq: 200 kHz max.
DS30272A-page 89
PIC16C71X
Applicable Devices
11.1
710 71 711 715
DC Characteristics:
PIC16C710-04 (Commercial, Industrial, Extended)
PIC16C711-04 (Commercial, Industrial, Extended)
PIC16C710-10 (Commercial, Industrial, Extended)
PIC16C711-10 (Commercial, Industrial, Extended)
PIC16C710-20 (Commercial, Industrial, Extended)
PIC16C711-20 (Commercial, Industrial, Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
-40˚C ≤ TA ≤ +125˚C (extended)
DC CHARACTERISTICS
Param.
No.
Characteristic
Sym
Min Typ† Max Units
Conditions
D001
D001A
Supply Voltage
VDD
4.0
4.5
-
6.0
5.5
V
V
D002*
RAM Data Retention
Voltage (Note 1)
VDR
-
1.5
-
V
D003
VDD start voltage to
ensure internal Poweron Reset signal
VPOR
-
VSS
-
V
D004*
VDD rise rate to ensure
internal Power-on Reset
signal
SVDD
0.05
-
-
D005
Brown-out Reset Voltage
BVDD
3.7
4.0
4.3
3.7
4.0
4.4
V
D010
Supply Current (Note 2)
IDD
-
2.7
5
mA
XT, RC osc configuration
FOSC = 4 MHz, VDD = 5.5V (Note 4)
-
13.5
30
mA
HS osc configuration
FOSC = 20 MHz, VDD = 5.5V
D013
XT, RC and LP osc configuration
HS osc configuration
See section on Power-on Reset for details
V/ms See section on Power-on Reset for details
V
BODEN configuration bit is enabled
Extended Range Only
D015
Brown-out Reset Current ∆IBOR
(Note 5)
-
300* 500
µA
BOR enabled VDD = 5.0V
D020
D021
D021A
D021B
Power-down Current
(Note 3)
-
10.5
1.5
1.5
1.5
42
21
24
30
µA
µA
µA
µA
VDD = 4.0V, WDT enabled, -40°C to +85°C
VDD = 4.0V, WDT disabled, -0°C to +70°C
VDD = 4.0V, WDT disabled, -40°C to +85°C
VDD = 4.0V, WDT disabled, -40°C to +125°C
D023
Brown-out Reset Current ∆IBOR
(Note 5)
-
300* 500
µA
BOR enabled VDD = 5.0V
*
†
Note 1:
2:
3:
4:
5:
IPD
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only
and are not tested.
This is the limit to which VDD can be lowered without losing RAM data.
The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern, and temperature also have an
impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail to rail; all I/O pins tristated, pulled to VDD
MCLR = VDD; WDT enabled/disabled as specified.
The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS.
For RC osc configuration, current through Rext is not included. The current through the resistor can be estimated by the formula Ir = VDD/2Rext (mA) with Rext in kOhm.
The ∆ current is the additional current consumed when this peripheral is enabled. This current should be
added to the base IDD or IPD measurement.
DS30272A-page 90
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
11.2
DC Characteristics:
PIC16LC710-04 (Commercial, Industrial, Extended)
PIC16LC711-04 (Commercial, Industrial, Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
-40˚C ≤ TA ≤ +125˚C (extended)
DC CHARACTERISTICS
Param
No.
D001
710 71 711 715
Characteristic
Sym
Min
Typ† Max Units
Supply Voltage
Commercial/Industrial
Extended
VDD
VDD
2.5
3.0
-
6.0
6.0
V
V
Conditions
LP, XT, RC osc configuration (DC - 4 MHz)
LP, XT, RC osc configuration (DC - 4 MHz)
D002*
RAM Data Retention
Voltage (Note 1)
VDR
-
1.5
-
V
D003
VDD start voltage to
ensure internal Poweron Reset signal
VPOR
-
VSS
-
V
D004*
VDD rise rate to ensure
internal Power-on
Reset
signal
SVDD
0.05
-
-
D005
Brown-out Reset
Voltage
BVDD
3.7
4.0
4.3
V
BODEN configuration bit is enabled
D010
Supply Current
(Note 2)
IDD
-
2.0
3.8
mA
XT, RC osc configuration
FOSC = 4 MHz, VDD = 3.0V (Note 4)
-
22.5
48
µA
∆IBOR
-
300*
500
µA
LP osc configuration
FOSC = 32 kHz, VDD = 3.0V, WDT disabled
BOR enabled VDD = 5.0V
IPD
-
7.5
0.9
0.9
0.9
300*
30
5
5
10
500
µA
µA
µA
µA
µA
VDD = 3.0V, WDT enabled, -40°C to +85°C
VDD = 3.0V, WDT disabled, 0°C to +70°C
VDD = 3.0V, WDT disabled, -40°C to +85°C
VDD = 3.0V, WDT disabled, -40°C to +125°C
BOR enabled VDD = 5.0V
D010A
D015
Brown-out Reset
Current (Note 5)
D020
D021
D021A
D021B
D023
Power-down Current
(Note 3)
*
†
Note 1:
2:
3:
4:
5:
Brown-out Reset
Current (Note 5)
∆IBOR
See section on Power-on Reset for details
V/ms See section on Power-on Reset for details
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only
and are not tested.
This is the limit to which VDD can be lowered without losing RAM data.
The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern, and temperature also have an
impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail to rail; all I/O pins tristated, pulled to VDD
MCLR = VDD; WDT enabled/disabled as specified.
The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS.
For RC osc configuration, current through Rext is not included. The current through the resistor can be estimated by the formula Ir = VDD/2Rext (mA) with Rext in kOhm.
The ∆ current is the additional current consumed when this peripheral is enabled. This current should be
added to the base IDD or IPD measurement.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 91
PIC16C71X
Applicable Devices
11.3
710 71 711 715
DC Characteristics:
PIC16C710-04 (Commercial, Industrial, Extended)
PIC16C711-04 (Commercial, Industrial, Extended)
PIC16C710-10 (Commercial, Industrial, Extended)
PIC16C711-10 (Commercial, Industrial, Extended)
PIC16C710-20 (Commercial, Industrial, Extended)
PIC16C711-20 (Commercial, Industrial, Extended)
PIC16LC710-04 (Commercial, Industrial, Extended)
PIC16LC711-04 (Commercial, Industrial, Extended)
DC CHARACTERISTICS
Param
No.
D030
D030A
D031
D032
D033
D040
D040A
D041
D042
D042A
D043
D070
Characteristic
Input Low Voltage
I/O ports
with TTL buffer
with Schmitt Trigger buffer
MCLR, OSC1
(in RC mode)
OSC1 (in XT, HS and LP)
Input High Voltage
I/O ports
with TTL buffer
D060
with Schmitt Trigger buffer
MCLR, RB0/INT
OSC1 (XT, HS and LP)
OSC1 (in RC mode)
PORTB weak pull-up current
Input Leakage Current (Notes 2, 3)
I/O ports
D061
D063
MCLR, RA4/T0CKI
OSC1
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
-40˚C ≤ TA ≤ +125˚C (extended)
Operating voltage VDD range as described in DC spec Section 11.1 and
Section 11.2.
Sym
Min Typ Max Units
Conditions
†
VIL
VSS
VSS
VSS
VSS
- 0.15VDD
0.8V
- 0.2VDD
- 0.2VDD
V
V
V
V
For entire VDD range
4.5 ≤ VDD ≤ 5.5V
VSS
-
0.3VDD
V
Note1
VDD
VDD
V
V
4.5 ≤ VDD ≤ 5.5V
For entire VDD range
VDD
VDD
VDD
VDD
400
V For entire VDD range
V
V Note1
V
µA VDD = 5V, VPIN = VSS
VIH
2.0
0.25VDD + 0.8V
0.8VDD 0.8VDD 0.7VDD 0.9VDD IPURB
50
250
IIL
-
-
±1
-
-
±5
±5
µA Vss ≤ VPIN ≤ VDD, Pin at hiimpedance
µA Vss ≤ VPIN ≤ VDD
µA Vss ≤ VPIN ≤ VDD, XT, HS and LP
osc configuration
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
PIC16C7X be driven with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as current sourced by the pin.
DS30272A-page 92
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
DC CHARACTERISTICS
Param
No.
Characteristic
Output Low Voltage
I/O ports
D080
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
-40˚C ≤ TA ≤ +125˚C (extended)
Operating voltage VDD range as described in DC spec Section 11.1 and
Section 11.2.
Sym
Min Typ Max Units
Conditions
†
VOL
-
-
0.6
V
-
-
0.6
V
-
-
0.6
V
-
-
0.6
V
VOH VDD - 0.7 -
-
V
VDD - 0.7 -
-
V
VDD - 0.7 -
-
V
VDD - 0.7 -
-
V
D080A
D083
OSC2/CLKOUT (RC osc config)
D083A
Output High Voltage
I/O ports (Note 3)
D090
D090A
D092
OSC2/CLKOUT (RC osc config)
D092A
D130*
D100
Open-Drain High Voltage
Capacitive Loading Specs on
Output Pins
OSC2 pin
710 71 711 715
VOD
-
-
14
V
COSC2
-
-
15
pF
IOL = 8.5 mA, VDD = 4.5V,
-40°C to +85°C
IOL = 7.0 mA, VDD = 4.5V,
-40°C to +125°C
IOL = 1.6 mA, VDD = 4.5V,
-40°C to +85°C
IOL = 1.2 mA, VDD = 4.5V,
-40°C to +125°C
IOH = -3.0 mA, VDD = 4.5V,
-40°C to +85°C
IOH = -2.5 mA, VDD = 4.5V,
-40°C to +125°C
IOH = -1.3 mA, VDD = 4.5V,
-40°C to +85°C
IOH = -1.0 mA, VDD = 4.5V,
-40°C to +125°C
RA4 pin
In XT, HS and LP modes when
external clock is used to drive
OSC1.
D101
All I/O pins and OSC2 (in RC mode) CIO
50
pF
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
PIC16C7X be driven with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as current sourced by the pin.
*
†
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 93
PIC16C71X
Applicable Devices
11.4
710 71 711 715
Timing Parameter Symbology
The timing parameter symbols have been created following one of the following formats:
1. TppS2ppS
2. TppS
T
F
Frequency
Lowercase letters (pp) and their meanings:
pp
cc
CCP1
ck
CLKOUT
cs
CS
di
SDI
do
SDO
dt
Data in
io
I/O port
mc
MCLR
Uppercase letters and their meanings:
S
F
Fall
H
High
I
Invalid (Hi-impedance)
L
Low
T
Time
osc
rd
rw
sc
ss
t0
t1
wr
OSC1
RD
RD or WR
SCK
SS
T0CKI
T1CKI
WR
P
R
V
Z
Period
Rise
Valid
Hi-impedance
FIGURE 11-1: LOAD CONDITIONS
Load condition 2
Load condition 1
VDD/2
RL
CL
Pin
VSS
CL
Pin
VSS
RL = 464Ω
CL = 50 pF
15 pF
for all pins except OSC2
for OSC2 output
DS30272A-page 94
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
11.5
710 71 711 715
Timing Diagrams and Specifications
FIGURE 11-2: EXTERNAL CLOCK TIMING
Q4
Q1
Q2
Q3
Q4
Q1
OSC1
1
3
3
4
4
2
CLKOUT
TABLE 11-2:
Parameter
No.
EXTERNAL CLOCK TIMING REQUIREMENTS
Sym
Characteristic
Fosc
External CLKIN Frequency
(Note 1)
Min
Typ†
Max
Units Conditions
DC
—
4
MHz XT osc mode
DC
—
4
MHz HS osc mode (-04)
DC
—
10
MHz HS osc mode (-10)
DC
—
20
MHz HS osc mode (-20)
DC
—
200
kHz LP osc mode
Oscillator Frequency
DC
—
4
MHz RC osc mode
(Note 1)
0.1
—
4
MHz XT osc mode
4
—
20
MHz HS osc mode
5
—
200
kHz LP osc mode
1
Tosc External CLKIN Period
250
—
—
ns
XT osc mode
(Note 1)
250
—
—
ns
HS osc mode (-04)
100
—
—
ns
HS osc mode (-10)
50
—
—
ns
HS osc mode (-20)
5
—
—
µs
LP osc mode
Oscillator Period
250
—
—
ns
RC osc mode
(Note 1)
250
—
10,000
ns
XT osc mode
250
—
250
ns
HS osc mode (-04)
100
—
250
ns
HS osc mode (-10)
50
—
250
ns
HS osc mode (-20)
5
—
—
µs
LP osc mode
—
DC
ns
TCY = 4/FOSC
2
TCY Instruction Cycle Time (Note 1) 200
3
TosL, External Clock in (OSC1) High
50
—
—
ns
XT oscillator
TosH or Low Time
2.5
—
—
µs
LP oscillator
10
—
—
ns
HS oscillator
4
TosR, External Clock in (OSC1) Rise
—
—
25
ns
XT oscillator
TosF or Fall Time
—
—
50
ns
LP oscillator
—
—
15
ns
HS oscillator
† Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: Instruction cycle period (TCY) equals four times the input oscillator time-base period. All specified values are based on
characterization data for that particular oscillator type under standard operating conditions with the device executing
code. Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current
consumption. All devices are tested to operate at "min." values with an external clock applied to the OSC1/CLKIN pin.
When an external clock input is used, the "Max." cycle time limit is "DC" (no clock) for all devices. OSC2 is disconnected
(has no loading) for the PIC16C710/711.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 95
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 11-3: CLKOUT AND I/O TIMING
Q1
Q4
Q2
Q3
OSC1
11
10
CLKOUT
13
19
14
12
18
16
I/O Pin
(input)
15
17
I/O Pin
(output)
new value
old value
20, 21
Note: Refer to Figure 11-1 for load conditions.
TABLE 11-3:
CLKOUT AND I/O TIMING REQUIREMENTS
Parameter Sym
No.
Characteristic
Min
Typ†
Max
Units Conditions
10*
TosH2ckL
OSC1↑ to CLKOUT↓
—
15
30
ns
Note 1
11*
TosH2ckH
OSC1↑ to CLKOUT↑
—
15
30
ns
Note 1
12*
TckR
CLKOUT rise time
—
5
15
ns
Note 1
13*
TckF
CLKOUT fall time
—
5
15
ns
Note 1
14*
TckL2ioV
CLKOUT ↓ to Port out valid
15*
TioV2ckH
Port in valid before CLKOUT ↑
16*
TckH2ioI
17*
TosH2ioV
18*
TosH2ioI
19*
20*
21*
—
—
0.5TCY + 20
ns
Note 1
0.25TCY + 25
—
—
ns
Note 1
Port in hold after CLKOUT ↑
0
—
—
ns
Note 1
OSC1↑ (Q1 cycle) to
Port out valid
—
—
80 - 100
ns
OSC1↑ (Q2 cycle) to
Port input invalid (I/O in hold time)
TBD
—
—
ns
TioV2osH
Port input valid to OSC1↑ (I/O in setup time)
TBD
—
—
ns
TioR
Port output rise time
PIC16C710/711
—
10
25
ns
PIC16LC710/711
—
—
60
ns
PIC16C710/711
—
10
25
ns
PIC16LC710/711
—
—
60
ns
TioF
Port output fall time
22††*
Tinp
INT pin high or low time
20
—
—
ns
23††*
Trbp
RB7:RB4 change INT high or low time
20
—
—
ns
*
†
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
†† These parameters are asynchronous events not related to any internal clock edges.
Note 1: Measurements are taken in RC Mode where CLKOUT output is 4 x TOSC.
DS30272A-page 96
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 11-4: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP
TIMER TIMING
VDD
MCLR
30
Internal
POR
33
PWRT
Time-out
32
OSC
Time-out
Internal
RESET
Watchdog
Timer
RESET
31
34
34
I/O Pins
Note: Refer to Figure 11-1 for load conditions.
FIGURE 11-5: BROWN-OUT RESET TIMING
BVDD
VDD
35
TABLE 11-4:
RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER,
AND BROWN-OUT RESET REQUIREMENTS
Parameter
No.
Sym
Characteristic
30
TmcL
MCLR Pulse Width (low)
1
—
—
µs
VDD = 5V, -40˚C to +125˚C
31
Twdt
Watchdog Timer Time-out Period
(No Prescaler)
7*
18
33*
ms
VDD = 5V, -40˚C to +125˚C
Oscillation Start-up Timer Period
—
1024TOSC
—
—
TOSC = OSC1 period
Power up Timer Period
28*
72
132*
ms
VDD = 5V, -40˚C to +125˚C
—
—
1.1
µs
100
—
—
µs
32
Tost
33
Tpwrt
34
TIOZ
I/O Hi-impedance from MCLR Low
or Watchdog Timer Reset
35
TBOR
Brown-out Reset pulse width
*
†
Min
Typ†
Max
Units
Conditions
3.8V ≤ VDD ≤ 4.2V
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 97
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 11-6: TIMER0 EXTERNAL CLOCK TIMINGS
RA4/T0CKI
41
40
42
TMR0
Note: Refer to Figure 11-1 for load conditions.
TABLE 11-5:
TIMER0 EXTERNAL CLOCK REQUIREMENTS
Param
No.
Sym
Characteristic
40
Tt0H
T0CKI High Pulse Width
41
Tt0L
T0CKI Low Pulse Width
Min
No Prescaler
With Prescaler
No Prescaler
With Prescaler
42
Tt0P
48
T0CKI Period
Tcke2tmrI Delay from external clock edge to timer increment
*
†
0.5TCY + 20*
Typ† Max Units Conditions
—
—
ns
10*
—
—
ns
0.5TCY + 20*
—
—
ns
10*
—
—
ns
Greater of:
20 ns or TCY + 40*
N
—
—
ns
2Tosc
—
7Tosc
—
Must also meet
parameter 42
Must also meet
parameter 42
N = prescale value
(2, 4,..., 256)
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
DS30272A-page 98
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
TABLE 11-6:
A/D CONVERTER CHARACTERISTICS:
PIC16C710/711-04 (COMMERCIAL, INDUSTRIAL, EXTENDED)
PIC16C710/711-10 (COMMERCIAL, INDUSTRIAL, EXTENDED)
PIC16C710/711-20 (COMMERCIAL, INDUSTRIAL, EXTENDED)
PIC16LC710/711-04 (COMMERCIAL, INDUSTRIAL, EXTENDED)
Param Sym Characteristic
No.
A01
NR
A02
710 71 711 715
Resolution
EABS Absolute error
Min
Typ†
Max
Units
bit
Conditions
VREF = VDD, VSS ≤ AIN ≤ VREF
—
—
8-bits
—
—
<±1
LSb VREF = VDD, VSS ≤ AIN ≤ VREF
A03
EIL
—
—
<±1
LSb VREF = VDD, VSS ≤ AIN ≤ VREF
A04
EDL Differential linearity error
—
—
<±1
LSb VREF = VDD, VSS ≤ AIN ≤ VREF
A05
EFS Full scale error
—
—
<±1
LSb VREF = VDD, VSS ≤ AIN ≤ VREF
A06
EOFF Offset error
—
—
<±1
LSb VREF = VDD, VSS ≤ AIN ≤ VREF
A10
—
Integral linearity error
VSS ≤ VAIN ≤ VREF
Monotonicity
—
guaranteed
—
—
A20
VREF Reference voltage
2.5V
—
VDD + 0.3
V
A25
VAIN Analog input voltage
VSS - 0.3
—
VREF + 0.3
V
A30
ZAIN Recommended impedance of
analog voltage source
—
—
10.0
kΩ
A40
IAD
—
180
—
µA
Average current consumption
when A/D is on. (Note 1)
A50
IREF VREF input current (Note 2)
10
—
1000
µA
—
—
10
µA
During VAIN acquisition.
Based on differential of VHOLD to VAIN.
To charge CHOLD see Section 7.1.
During A/D Conversion cycle
A/D conversion current (VDD)
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: When A/D is off, it will not consume any current other than minor leakage current.
The power-down current spec includes any such leakage from the A/D module.
2: VREF current is from RA3 pin or VDD pin, whichever is selected as reference input.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 99
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 11-7: A/D CONVERSION TIMING
BSF ADCON0, GO
1 Tcy
(TOSC/2) (1)
131
Q4
130
132
A/D CLK
7
A/D DATA
6
5
4
3
2
1
NEW_DATA
OLD_DATA
ADRES
0
ADIF
GO
DONE
SAMPLING STOPPED
SAMPLE
Note 1: If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the
SLEEP instruction to be executed.
TABLE 11-7:
Param
No.
130
A/D CONVERSION REQUIREMENTS
Sym Characteristic
TAD
A/D clock period
Units
Conditions
1.6
—
—
µs
TOSC based, VREF ≥ 3.0V
2.0
—
—
µs
TOSC based, VREF full range
PIC16C710/711
2.0*
4.0
6.0
µs
A/D RC mode
PIC16LC710/711
3.0*
6.0
9.0
µs
A/D RC mode
—
9.5
—
TAD
Note 2
20
—
µs
5*
—
—
µs
The minimum time is the amplifier
settling time. This may be used if the
"new" input voltage has not changed
by more than 1 LSb (i.e., 19.5 mV @
5.12V) from the last sampled voltage
(as stated on CHOLD).
—
TOSC/2§
—
—
If the A/D clock source is selected as
RC, a time of TCY is added before the
A/D clock starts. This allows the
SLEEP instruction to be executed.
1.5§
—
—
TAD
132
TACQ Acquisition time
Q4 to AD clock start
TSWC Switching from convert → sample time
135
Max
PIC16C710/711
TCNV Conversion time
(not including S/H time). (Note 1)
TGO
Typ†
PIC16LC710/711
131
134
Min
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
§ This specification ensured by design.
Note 1: ADRES register may be read on the following TCY cycle.
2: See Section 7.1 for min conditions.
DS30272A-page 100
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
12.0
710 71 711 715
DC AND AC CHARACTERISTICS GRAPHS AND TABLES FOR PIC16C710
AND PIC16C711
The graphs and tables provided in this section are for design guidance and are not tested or guaranteed.
In some graphs or tables the data presented are outside specified operating range (i.e., outside specified VDD
range). This is for information only and devices are guaranteed to operate properly only within the specified
range.
Note:
The data presented in this section is a statistical summary of data collected on units from different lots over
a period of time and matrix samples. 'Typical' represents the mean of the distribution at, 25°C, while 'max'
or 'min' represents (mean +3σ) and (mean -3σ) respectively where σ is standard deviation.
FIGURE 12-1: TYPICAL IPD vs. VDD (WDT DISABLED, RC MODE)
35
30
IPD(nA)
25
20
15
10
5
0
2.5
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
FIGURE 12-2: MAXIMUM IPD vs. VDD (WDT DISABLED, RC MODE)
10.000
85°C
70°C
IPD(µA)
1.000
25°C
0.100
0°C
-40°C
0.010
0.001
2.5
1997 Microchip Technology Inc.
3.0
Powered by ICminer.com Electronic-Library Service CopyRight 2003
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
DS30272A-page 101
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 12-3: TYPICAL IPD vs. VDD @ 25°C
(WDT ENABLED, RC MODE)
FIGURE 12-5: TYPICAL RC OSCILLATOR
FREQUENCY vs. VDD
Cext = 22 pF, T = 25°C
6.0
25
5.5
5.0
4.5
Fosc(MHz)
IPD(µA)
20
15
10
R = 5k
4.0
3.5
3.0
R = 10k
2.5
2.0
5
1.5
1.0
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
0.0
2.5
VDD(Volts)
FIGURE 12-4: MAXIMUM IPD vs. VDD (WDT
ENABLED, RC MODE)
35
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
6.0
Shaded area is beyond recommended range.
0°C
Cext = 100 pF, T = 25°C
2.4
2.2
25
R = 3.3k
2.0
20
1.8
70°C
Fosc(MHz)
IPD(µA)
5.5
FIGURE 12-6: TYPICAL RC OSCILLATOR
FREQUENCY vs. VDD
-40°C
30
R = 100k
0.5
6.0
15
85°C
10
5
1.6
R = 5k
1.4
1.2
1.0
R = 10k
0.8
0.6
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
0.4
6.0
R = 100k
0.2
VDD(Volts)
0.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
VDD(Volts)
FIGURE 12-7: TYPICAL RC OSCILLATOR
FREQUENCY vs. VDD
Cext = 300 pF, T = 25°C
1000
900
Fosc(kHz)
800
R = 3.3k
700
600
R = 5k
500
400
R = 10k
300
200
R = 100k
100
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
VDD(Volts)
DS30272A-page 102
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 12-8: TYPICAL IPD vs. VDD BROWNOUT DETECT ENABLED (RC
MODE)
710 71 711 715
FIGURE 12-10: TYPICAL IPD vs. TIMER1
ENABLED (32 kHz, RC0/RC1 =
33 pF/33 pF, RC MODE)
1400
1200
30
25
Device NOT in
Brown-out Reset
800
20
600
400
200
0
2.5
IPD(µA)
IPD(µA)
1000
Device in
Brown-out
Reset
15
10
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
5
6.0
0
2.5
The shaded region represents the built-in hysteresis of the
brown-out reset circuitry.
FIGURE 12-9: MAXIMUM IPD vs. VDD
BROWN-OUT DETECT
ENABLED
(85°C TO -40°C, RC MODE)
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
FIGURE 12-11: MAXIMUM IPD vs. TIMER1
ENABLED
(32 kHz, RC0/RC1 = 33 pF/33
pF, 85°C TO -40°C, RC MODE)
1600
1400
1200
45
40
Device NOT in
Brown-out Reset
800
35
30
600
400
Device in
Brown-out
Reset
IPD(µA)
IPD(µA)
1000
20
15
200
4.3
0
2.5
25
3.0
3.5
4.0
4.5
VDD(Volts)
10
5.0
5.5
6.0
The shaded region represents the built-in hysteresis of the
brown-out reset circuitry.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
5
0
2.5
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
DS30272A-page 103
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 12-12: TYPICAL IDD vs. FREQUENCY (RC MODE @ 22 pF, 25°C)
2000
6.0V
1800
5.5V
5.0V
1600
4.5V
IDD(µA)
1400
4.0V
1200
3.5V
1000
3.0V
800
2.5V
600
400
200
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency(MHz)
3.5
4.0
4.5
Shaded area is
beyond recommended range
FIGURE 12-13: MAXIMUM IDD vs. FREQUENCY (RC MODE @ 22 pF, -40°C TO 85°C)
2000
6.0V
1800
5.5V
5.0V
1600
4.5V
IDD(µA)
1400
4.0V
1200
3.5V
1000
3.0V
800
2.5V
600
400
200
0
0.0
0.5
1.0
1.5
2.0
2.5
Frequency(MHz)
DS30272A-page 104
Powered by ICminer.com Electronic-Library Service CopyRight 2003
3.0
3.5
4.0
4.5
Shaded area is
beyond recommended range
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 12-14: TYPICAL IDD vs. FREQUENCY (RC MODE @ 100 pF, 25°C)
1600
6.0V
1400
5.5V
5.0V
1200
4.5V
4.0V
1000
IDD(µA)
3.5V
3.0V
800
2.5V
600
400
200
0
0
200
400
Shaded area is
beyond recommended range
600
800
1000
1200
1400
1600
1800
Frequency(kHz)
FIGURE 12-15: MAXIMUM IDD vs. FREQUENCY (RC MODE @ 100 pF, -40°C TO 85°C)
1600
6.0V
1400
5.5V
5.0V
1200
4.5V
4.0V
1000
IDD(µA)
3.5V
3.0V
800
2.5V
600
400
200
0
0
200
400
Shaded area is
beyond recommended range
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
600
800
1000
1200
1400
1600
1800
Frequency(kHz)
DS30272A-page 105
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 12-16: TYPICAL IDD vs. FREQUENCY (RC MODE @ 300 pF, 25°C)
1200
6.0V
5.5V
1000
5.0V
4.5V
4.0V
800
3.5V
IDD(µA)
3.0V
600
2.5V
400
200
0
0
100
200
300
400
500
600
700
Frequency(kHz)
FIGURE 12-17: MAXIMUM IDD vs. FREQUENCY (RC MODE @ 300 pF, -40°C TO 85°C)
1200
6.0V
5.5V
1000
5.0V
4.5V
4.0V
800
IDD(µA)
3.5V
3.0V
600
2.5V
400
200
0
0
100
200
300
400
500
600
700
Frequency(kHz)
DS30272A-page 106
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 12-18: TYPICAL IDD vs.
CAPACITANCE @ 500 kHz
(RC MODE)
FIGURE 12-19: TRANSCONDUCTANCE(gm)
OF HS OSCILLATOR vs. VDD
600
4.0
Max -40°C
5.0V
500
3.5
3.0
gm(mA/V)
4.0V
400
IDD(µA)
710 71 711 715
3.0V
300
200
2.5
Typ 25°C
2.0
Min 85°C
1.5
1.0
100
0.5
0
20 pF
100 pF
RC OSCILLATOR
FREQUENCIES
100
300 pF
5k
4.12 MHz
± 1.4%
10k
2.35 MHz
± 1.4%
100k
268 kHz
± 1.1%
5.5
6.0
6.5
7.0
70
60
1.80 MHz
± 1.0%
1.27 MHz
± 1.0%
10k
688 kHz
± 1.2%
20
100k
77.2 kHz
± 1.0%
10
3.3k
707 kHz
± 1.4%
± 1.2%
10k
269 kHz
± 1.6%
100k
28.3 kHz
± 1.1%
The percentage variation indicated here is part to
part variation due to normal process distribution. The
variation indicated is ±3 standard deviation from
average value for VDD = 5V.
Typ 25°C
50
5k
501 kHz
Max -40°C
80
3.3k
5k
5.0
90
gm(µA/V)
100 pF
4.5
110
Rext
Fosc @ 5V, 25°C
22 pF
4.0
FIGURE 12-20: TRANSCONDUCTANCE(gm)
OF LP OSCILLATOR vs. VDD
Average
Cext
3.5
VDD(Volts)
Shaded area is
beyond recommended range
Capacitance(pF)
TABLE 12-1:
0.0
3.0
300 pF
40
30
0
2.0
Min 85°C
2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
7.0
VDD(Volts)
Shaded areas are
beyond recommended range
FIGURE 12-21: TRANSCONDUCTANCE(gm)
OF XT OSCILLATOR vs. VDD
1000
900
Max -40°C
800
gm(µA/V)
700
600
Typ 25°C
500
400
300
Min 85°C
200
100
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
7.0
VDD(Volts)
Shaded areas are
beyond recommended range
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 107
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 12-22: TYPICAL XTAL STARTUP
TIME vs. VDD (LP MODE, 25°C)
FIGURE 12-24: TYPICAL XTAL STARTUP
TIME vs. VDD (XT MODE, 25°C)
3.5
70
3.0
60
50
Startup Time(ms)
Startup Time(Seconds)
2.5
2.0
32 kHz, 33 pF/33 pF
1.5
1.0
40
200 kHz, 68 pF/68 pF
30
200 kHz, 47 pF/47 pF
20
1 MHz, 15 pF/15 pF
10
0.5
4 MHz, 15 pF/15 pF
200 kHz, 15 pF/15 pF
0.0
2.5
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
3.0
3.5
6.0
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
VDD(Volts)
FIGURE 12-23: TYPICAL XTAL STARTUP
TIME vs. VDD (HS MODE,
25°C)
TABLE 12-2:
7
Osc Type
Startup Time(ms)
6
LP
20 MHz, 33 pF/33 pF
5
XT
4
8 MHz, 33 pF/33 pF
3
20 MHz, 15 pF/15 pF
8 MHz, 15 pF/15 pF
2
1
4.0
4.5
5.0
VDD(Volts)
5.5
DS30272A-page 108
Powered by ICminer.com Electronic-Library Service CopyRight 2003
HS
CAPACITOR SELECTION
FOR CRYSTAL
OSCILLATORS
Crystal
Freq
Cap. Range
C1
Cap. Range
C2
33 pF
32 kHz
33 pF
200 kHz
15 pF
15 pF
200 kHz
47-68 pF
47-68 pF
1 MHz
15 pF
15 pF
4 MHz
15 pF
15 pF
4 MHz
15 pF
15 pF
8 MHz
15-33 pF
15-33 pF
20 MHz
15-33 pF
15-33 pF
6.0
Crystals
Used
32 kHz
Epson C-001R32.768K-A
± 20 PPM
200 kHz
STD XTL 200.000KHz
± 20 PPM
1 MHz
ECS ECS-10-13-1
± 50 PPM
4 MHz
ECS ECS-40-20-1
± 50 PPM
8 MHz
EPSON CA-301 8.000M-C
± 30 PPM
20 MHz
EPSON CA-301 20.000M-C
± 30 PPM
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 12-25: TYPICAL IDD vs. FREQUENCY
(LP MODE, 25°C)
710 71 711 715
FIGURE 12-27: TYPICAL IDD vs. FREQUENCY
(XT MODE, 25°C)
1800
1600
6.0V
1400
5.5V
120
100
5.0V
1200
4.5V
1000
4.0V
60
40
20
0
0
6.0V
5.5V
5.0V
4.5V
4.0V
3.5V
3.0V
2.5V
IDD(µA)
IDD(µA)
80
3.5V
800
3.0V
600
2.5V
400
50
100
150
200
200
Frequency(kHz)
0
0.0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
Frequency(MHz)
FIGURE 12-26: MAXIMUM IDD vs.
FREQUENCY
(LP MODE, 85°C TO -40°C)
FIGURE 12-28: MAXIMUM IDD vs.
FREQUENCY
(XT MODE, -40°C TO 85°C)
1800
140
6.0V
1600
5.5V
1400
100
1200
80
1000
4.0V
800
3.5V
60
40
20
0
0
6.0V
5.5V
5.0V
4.5V
4.0V
3.5V
3.0V
2.5V
IDD(µA)
IDD(µA)
120
5.0V
4.5V
3.0V
600
2.5V
400
200
50
100
150
Frequency(kHz)
200
0
0.0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
Frequency(MHz)
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 109
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 12-29: TYPICAL IDD vs. FREQUENCY
(HS MODE, 25°C)
7.0
FIGURE 12-30: MAXIMUM IDD vs.
FREQUENCY
(HS MODE, -40°C TO 85°C)
7.0
6.0
6.0
5.0
IDD(mA)
IDD(mA)
5.0
4.0
3.0
2.0
1.0
0.0
1 2
6.0V
5.5V
5.0V
4.5V
4.0V
4.0
3.0
2.0
1.0
4
6
8
10
12
14
16
Frequency(MHz)
18
20
0.0
1 2
6.0V
5.5V
5.0V
4.5V
4.0V
4
6
8
10
12
14
16
18
20
Frequency(MHz)
DS30272A-page 110
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
13.0
710 71 711 715
ELECTRICAL CHARACTERISTICS FOR PIC16C715
Absolute Maximum Ratings †
Ambient temperature under bias................................................................................................................ .-55 to +125˚C
Storage temperature .............................................................................................................................. -65˚C to +150˚C
Voltage on any pin with respect to VSS (except VDD and MCLR).................................................... -0.3V to (VDD + 0.3V)
Voltage on VDD with respect to VSS ................................................................................................................ 0 to +7.5V
Voltage on MCLR with respect to VSS................................................................................................................0 to +14V
Voltage on RA4 with respect to Vss ...................................................................................................................0 to +14V
Total power dissipation (Note 1)................................................................................................................................1.0W
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin ..............................................................................................................................250 mA
Input clamp current, IIK (VI < 0 or VI > VDD).....................................................................................................................± 20 mA
Output clamp current, IOK (VO < 0 or VO > VDD) .............................................................................................................± 20 mA
Maximum output current sunk by any I/O pin..........................................................................................................25 mA
Maximum output current sourced by any I/O pin ....................................................................................................25 mA
Maximum current sunk by PORTA ........................................................................................................................200 mA
Maximum current sourced by PORTA ...................................................................................................................200 mA
Maximum current sunk by PORTB........................................................................................................................200 mA
Maximum current sourced by PORTB...................................................................................................................200 mA
Note 1: Power dissipation is calculated as follows: Pdis = VDD x {IDD - ∑ IOH} + ∑ {(VDD - VOH) x IOH} + ∑(VOl x IOL).
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 111
PIC16C71X
710 71 711 715
1997 Microchip Technology Inc.
CROSS REFERENCE OF DEVICE SPECS FOR OSCILLATOR CONFIGURATIONS
AND FREQUENCIES OF OPERATION (COMMERCIAL DEVICES)
PIC16C715-04
PIC16C715-10
PIC16C715-20
PIC16LC715-04
PIC16C715/JW
VDD: 4.0V to 5.5V
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD: 2.5V to 5.5V
VDD: 4.0V to 5.5V
IDD: 5 mA max. at 5.5V
IDD: 2.7 mA typ. at 5.5V
IDD: 2.7 mA typ. at 5.5V IDD: 2.0 mA typ. at 3.0V
IDD: 5 mA max. at 5.5V
RC
IPD: 21 µA max. at 4V
IPD: 1.5 µA typ. at 4V
IPD: 1.5 µA typ. at 4V
IPD: 0.9 µA typ. at 3V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
VDD: 4.0V to 5.5V
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD: 2.5V to 5.5V
VDD: 4.0V to 5.5V
IDD: 5 mA max. at 5.5V
IDD: 2.7 mA typ. at 5.5V
IDD: 2.7 mA typ. at 5.5V IDD: 2.0 mA typ. at 3.0V
IDD: 5 mA max. at 5.5V
XT
IPD: 21 µA max. at 4V
IPD: 1.5 µA typ. at 4V
IPD: 1.5 µA typ. at 4V
IPD: 0.9 µA typ. at 3V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
IDD: 13.5 mA typ. at 5.5V
IDD: 30 mA max. at 5.5V
IDD: 30 mA max. at 5.5V
IDD: 30 mA max. at 5.5V
HS
Do not use in HS mode
IPD: 1.5 µA typ. at 4.5V
IPD: 1.5 µA typ. at 4.5V
IPD: 1.5 µA typ. at 4.5V
IPD: 1.5 µA typ. at 4.5V
Freq: 4 MHz max.
Freq: 10 MHz max.
Freq: 20 MHz max.
Freq: 10 MHz max.
VDD: 4.0V to 5.5V
VDD: 2.5V to 5.5V
VDD: 2.5V to 5.5V
IDD: 52.5 µA typ. at 32 kHz, 4.0V
IDD: 48 µA max. at 32 kHz, 3.0V IDD: 48 µA max. at 32 kHz, 3.0V
LP
Do not use in LP mode
Do not use in LP mode
IPD: 0.9 µA typ. at 4.0V
IPD: 5.0 µA max. at 3.0V
IPD: 5.0 µA max. at 3.0V
Freq: 200 kHz max.
Freq: 200 kHz max.
Freq: 200 kHz max.
The shaded sections indicate oscillator selections which are tested for functionality, but not for MIN/MAX specifications. It is recommended that the user select the device type
that ensures the specifications required.
Applicable Devices
TABLE 13-1:
DS30272A-page 112
OSC
PIC16C71X
Applicable Devices
13.1
DC Characteristics:
PIC16C715-04 (Commercial, Industrial, Extended)
PIC16C715-10 (Commercial, Industrial, Extended)
PIC16C715-20 (Commercial, Industrial, Extended))
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
-40˚C ≤ TA ≤ +125˚C (extended)
DC CHARACTERISTICS
Param.
No.
Characteristic
710 71 711 715
Sym
Min Typ† Max Units
Conditions
D001
D001A
Supply Voltage
VDD
4.0
4.5
-
5.5
5.5
V
V
XT, RC and LP osc configuration
HS osc configuration
D002*
RAM Data Retention
Voltage (Note 1)
VDR
-
1.5
-
V
Device in SLEEP mode
D003
VDD start voltage to
ensure internal Poweron Reset signal
VPOR
-
VSS
-
V
See section on Power-on Reset for details
D004*
VDD rise rate to ensure
internal Power-on Reset
signal
SVDD
0.05
-
-
D005
Brown-out Reset Voltage
BVDD
3.7
4.0
4.3
V
D010
Supply Current (Note 2)
IDD
-
2.7
5
mA
XT, RC osc configuration (PIC16C715-04)
FOSC = 4 MHz, VDD = 5.5V (Note 4)
-
13.5
30
mA
HS osc configuration (PIC16C715-20)
FOSC = 20 MHz, VDD = 5.5V
D013
V/ms See section on Power-on Reset for details
BODEN configuration bit is enabled
D015
Brown-out Reset Current ∆IBOR
(Note 5)
-
300* 500
µA
BOR enabled VDD = 5.0V
D020
D021
D021A
D021B
Power-down Current
(Note 3)
-
10.5
1.5
1.5
1.5
42
21
24
30
µA
µA
µA
µA
VDD = 4.0V, WDT enabled, -40°C to +85°C
VDD = 4.0V, WDT disabled, -0°C to +70°C
VDD = 4.0V, WDT disabled, -40°C to +85°C
VDD = 4.0V, WDT disabled, -40°C to +125°C
D023
Brown-out Reset Current ∆IBOR
(Note 5)
-
300* 500
µA
BOR enabled VDD = 5.0V
*
†
Note 1:
2:
3:
4:
5:
IPD
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only
and are not tested.
This is the limit to which VDD can be lowered in SLEEP mode without losing RAM data.
The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern, and temperature also have an
impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail to rail; all I/O pins tristated, pulled to VDD
MCLR = VDD; WDT enabled/disabled as specified.
The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS.
For RC osc configuration, current through Rext is not included. The current through the resistor can be
estimated by the formula Ir = VDD/2Rext (mA) with Rext in kOhm.
The ∆ current is the additional current consumed when this peripheral is enabled. This current should be
added to the base IDD or IPD measurement.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 113
PIC16C71X
Applicable Devices
13.2
710 71 711 715
DC Characteristics:
PIC16LC715-04 (Commercial, Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
DC CHARACTERISTICS
Param
No.
Characteristic
Sym
Min
Typ† Max Units
Conditions
D001
Supply Voltage
VDD
2.5
-
5.5
V
LP, XT, RC osc configuration (DC - 4 MHz)
D002*
RAM Data Retention
Voltage (Note 1)
VDR
-
1.5
-
V
Device in SLEEP mode
D003
VDD start voltage to
ensure internal
Power-on Reset
signal
VPOR
-
VSS
-
V
See section on Power-on Reset for details
D004*
VDD rise rate to
ensure internal
Power-on Reset
signal
SVDD
0.05
-
-
D005
Brown-out Reset
Voltage
BVDD
3.7
4.0
4.3
V
BODEN configuration bit is enabled
D010
Supply Current
(Note 2)
IDD
-
2.0
3.8
mA
XT, RC osc configuration
FOSC = 4 MHz, VDD = 3.0V (Note 4)
-
22.5
48
µA
LP osc configuration
FOSC = 32 kHz, VDD = 3.0V, WDT disabled
D010A
V/ms See section on Power-on Reset for details
D015
Brown-out Reset
Current (Note 5)
∆IBOR
-
300*
500
µA
BOR enabled VDD = 5.0V
D020
D021
D021A
Power-down Current
(Note 3)
IPD
-
7.5
0.9
0.9
30
5
5
µA
µA
µA
VDD = 3.0V, WDT enabled, -40°C to +85°C
VDD = 3.0V, WDT disabled, 0°C to +70°C
VDD = 3.0V, WDT disabled, -40°C to +85°C
D023
Brown-out Reset
Current (Note 5)
∆IBOR
-
300*
500
µA
BOR enabled VDD = 5.0V
*
†
Note 1:
2:
3:
4:
5:
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only
and are not tested.
This is the limit to which VDD can be lowered in SLEEP mode without losing RAM data.
The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern, and temperature also have an
impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail to rail; all I/O pins tristated, pulled to VDD
MCLR = VDD; WDT enabled/disabled as specified.
The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS.
For RC osc configuration, current through Rext is not included. The current through the resistor can be estimated by the formula Ir = VDD/2Rext (mA) with Rext in kOhm.
The ∆ current is the additional current consumed when this peripheral is enabled. This current should be
added to the base IDD or IPD measurement.
DS30272A-page 114
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
13.3
DC Characteristics:
PIC16C715-04 (Commercial, Industrial, Extended)
PIC16C715-10 (Commercial, Industrial, Extended)
PIC16C715-20 (Commercial, Industrial, Extended)
PIC16LC715-04 (Commercial, Industrial))
DC CHARACTERISTICS
Param
No.
D030
D031
D032
D033
D040
D040A
D041
D042
D042A
D043
D070
Characteristic
Input Low Voltage
I/O ports
with TTL buffer
with Schmitt Trigger buffer
MCLR, RA4/T0CKI,OSC1
(in RC mode)
OSC1 (in XT, HS and LP)
Input High Voltage
I/O ports
with TTL buffer
D060
with Schmitt Trigger buffer
MCLR, RA4/T0CKI RB0/INT
OSC1 (XT, HS and LP)
OSC1 (in RC mode)
PORTB weak pull-up current
Input Leakage Current (Notes 2, 3)
I/O ports
D061
D063
MCLR, RA4/T0CKI
OSC1
D080
Output Low Voltage
I/O ports
D080A
D083
D083A
†
Note 1:
2:
3:
710 71 711 715
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
-40˚C ≤ TA ≤ +125˚C (extended)
Operating voltage VDD range as described in DC spec Section 13.1
and Section 13.2.
Sym
Min Typ Max Units
Conditions
†
VIL
VSS
VSS
VSS
-
0.5V
0.2VDD
0.2VDD
V
V
V
VSS
-
0.3VDD
V
Note1
VDD
VDD
VDD
VDD
VDD
VDD
400
V
V
V
V
V
V
µA
4.5 ≤ VDD ≤ 5.5V
For VDD > 5.5V or VDD < 4.5V
For entire VDD range
VIH
2.0
0.8VDD 0.8VDD 0.8VDD 0.7VDD 0.9VDD IPURB
50
250
IIL
VOL
-
-
±1
-
-
±5
±5
-
-
0.6
Note1
VDD = 5V, VPIN = VSS
µA Vss ≤ VPIN ≤ VDD, Pin at hiimpedance
µA Vss ≤ VPIN ≤ VDD
µA Vss ≤ VPIN ≤ VDD, XT, HS and LP
osc configuration
IOL = 8.5 mA, VDD = 4.5V,
-40°C to +85°C
0.6
V IOL = 7.0 mA, VDD = 4.5V,
-40°C to +125°C
OSC2/CLKOUT (RC osc config)
0.6
V IOL = 1.6 mA, VDD = 4.5V,
-40°C to +85°C
0.6
V IOL = 1.2 mA, VDD = 4.5V,
-40°C to +125°C
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
PIC16C7X be driven with external clock in RC mode.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
Negative current is defined as coming out of the pin.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
V
DS30272A-page 115
PIC16C71X
Applicable Devices
710 71 711 715
DC CHARACTERISTICS
Param
No.
Characteristic
Output High Voltage
I/O ports (Note 3)
D090
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
-40˚C ≤ TA ≤ +125˚C (extended)
Operating voltage VDD range as described in DC spec Section 13.1
and Section 13.2.
Sym
Min Typ Max Units
Conditions
†
VOH VDD - 0.7 -
-
V
VDD - 0.7 -
-
V
VDD - 0.7 -
-
V
VDD - 0.7 -
-
V
15
pF
D090A
D092
OSC2/CLKOUT (RC osc config)
D092A
Capacitive Loading Specs on
Output Pins
OSC2 pin
D100
COSC2
-
-
IOH = -3.0 mA, VDD = 4.5V,
-40°C to +85°C
IOH = -2.5 mA, VDD = 4.5V,
-40°C to +125°C
IOH = -1.3 mA, VDD = 4.5V,
-40°C to +85°C
IOH = -1.0 mA, VDD = 4.5V,
-40°C to +125°C
In XT, HS and LP modes when
external clock is used to drive
OSC1.
D101
All I/O pins and OSC2 (in RC mode) CIO
50
pF
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
PIC16C7X be driven with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as coming out of the pin.
†
DS30272A-page 116
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
13.4
710 71 711 715
Timing Parameter Symbology
The timing parameter symbols have been created following one of the following formats:
1. TppS2ppS
2. TppS
T
F
Frequency
Lowercase letters (pp) and their meanings:
pp
cc
CCP1
ck
CLKOUT
cs
CS
di
SDI
do
SDO
dt
Data in
io
I/O port
mc
MCLR
Uppercase letters and their meanings:
S
F
Fall
H
High
I
Invalid (Hi-impedance)
L
Low
T
Time
osc
rd
rw
sc
ss
t0
t1
wr
OSC1
RD
RD or WR
SCK
SS
T0CKI
T1CKI
WR
P
R
V
Z
Period
Rise
Valid
Hi-impedance
FIGURE 13-1: LOAD CONDITIONS
Load condition 2
Load condition 1
VDD/2
RL
CL
Pin
VSS
CL
Pin
VSS
RL = 464Ω
CL = 50 pF
15 pF
1997 Microchip Technology Inc.
for all pins except OSC2
for OSC2 output
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 117
PIC16C71X
Applicable Devices
13.5
710 71 711 715
Timing Diagrams and Specifications
FIGURE 13-2: EXTERNAL CLOCK TIMING
Q4
Q1
Q2
Q3
Q4
Q1
OSC1
1
3
4
3
4
2
CLKOUT
TABLE 13-2:
Parameter
No.
CLOCK TIMING REQUIREMENTS
Sym
Characteristic
Min
Typ†
Max
Units Conditions
Fos
External CLKIN Frequency
(Note 1)
DC
DC
DC
DC
DC
0.1
4
4
—
—
—
—
—
—
—
—
4
4
20
200
4
4
4
10
MHz
MHz
MHz
kHz
MHz
MHz
MHz
MHz
XT osc mode
HS osc mode (PIC16C715-04)
HS osc mode (PIC16C715-20)
LP osc mode
RC osc mode
XT osc mode
HS osc mode (PIC16C715-04)
HS osc mode (PIC16C715-10)
4
—
20
MHz
HS osc mode (PIC16C715-20)
5
250
250
100
50
5
250
250
250
100
—
—
—
—
—
—
—
—
—
—
200
—
—
—
—
—
—
10,000
250
250
kHz
ns
ns
ns
ns
µs
ns
ns
ns
ns
LP osc mode
XT osc mode
HS osc mode (PIC16C715-04)
HS osc mode (PIC16C715-10)
HS osc mode (PIC16C715-20)
LP osc mode
RC osc mode
XT osc mode
HS osc mode (PIC16C715-04)
HS osc mode (PIC16C715-10)
Oscillator Frequency
(Note 1)
1
Tosc
External CLKIN Period
(Note 1)
Oscillator Period
(Note 1)
50
—
250
ns
HS osc mode (PIC16C715-20)
5
—
—
µs
LP osc mode
—
DC
ns
TCY = 4/FOSC
2
TCY Instruction Cycle Time (Note 1) 200
3
TosL, External Clock in (OSC1) High
50
—
—
ns
XT oscillator
TosH or Low Time
2.5
—
—
µs
LP oscillator
10
—
—
ns
HS oscillator
4
TosR, External Clock in (OSC1) Rise
—
—
25
ns
XT oscillator
TosF or Fall Time
—
—
50
ns
LP oscillator
—
—
15
ns
HS oscillator
† Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: Instruction cycle period (TCY) equals four times the input oscillator time-base period. All specified values are based on
characterization data for that particular oscillator type under standard operating conditions with the device executing code.
Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. All devices are tested to operate at "min." values with an external clock applied to the OSC1/CLKIN pin.
When an external clock input is used, the "Max." cycle time limit is "DC" (no clock) for all devices. OSC2 is disconnected
(has no loading) for the PIC16C715.
DS30272A-page 118
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
710 71 711 715
Q2
Q3
FIGURE 13-3: CLKOUT AND I/O TIMING
Q1
Q4
OSC1
11
10
CLKOUT
13
19
14
12
18
16
I/O Pin
(input)
15
17
I/O Pin
(output)
new value
old value
20, 21
Note: Refer to Figure 13-1 for load conditions.
TABLE 13-3:
CLKOUT AND I/O TIMING REQUIREMENTS
Parameter Sym
No.
Characteristic
Min
Typ†
Max
Units Conditions
10*
TosH2ckL
OSC1↑ to CLKOUT↓
—
15
30
ns
Note 1
11*
TosH2ckH
OSC1↑ to CLKOUT↑
—
15
30
ns
Note 1
12*
TckR
CLKOUT rise time
—
5
15
ns
Note 1
13*
TckF
CLKOUT fall time
—
5
15
ns
Note 1
14*
TckL2ioV
CLKOUT ↓ to Port out valid
—
—
0.5TCY + 20
ns
Note 1
15*
TioV2ckH
Port in valid before CLKOUT ↑
0.25TCY + 25
—
—
ns
Note 1
16*
TckH2ioI
Port in hold after CLKOUT ↑
0
—
—
ns
Note 1
17*
TosH2ioV
OSC1↑ (Q1 cycle) to
Port out valid
—
—
80 - 100
ns
18*
TosH2ioI
OSC1↑ (Q2 cycle) to
Port input invalid (I/O in hold time)
TBD
—
—
ns
19*
TioV2osH
Port input valid to OSC1↑ (I/O in setup time)
20*
TioR
Port output rise time
21*
TioF
Port output fall time
TBD
—
—
ns
PIC16C715
—
10
25
ns
PIC16LC715
—
—
60
ns
PIC16C715
—
10
25
ns
PIC16LC715
—
—
60
ns
22††*
Tinp
INT pin high or low time
20
—
—
ns
23††*
Trbp
RB7:RB4 change INT high or low time
20
—
—
ns
*
†
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
†† These parameters are asynchronous events not related to any internal clock edges.
Note 1: Measurements are taken in RC Mode where CLKOUT output is 4 x TOSC.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 119
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 13-4: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, AND POWER-UP
TIMER TIMING
VDD
MCLR
30
Internal
POR
33
PWRT
Timeout
32
OSC
Timeout
Internal
RESET
Parity
Error
Reset
36
Watchdog
Timer
RESET
34
31
34
I/O Pins
FIGURE 13-5: BROWN-OUT RESET TIMING
BVDD
VDD
35
TABLE 13-4:
RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER,
AND BROWN-OUT RESET REQUIREMENTS
Parameter
No.
Sym
30
TmcL
MCLR Pulse Width (low)
2
—
—
µs
VDD = 5V, -40˚C to +125˚C
31*
Twdt
Watchdog Timer Time-out Period
(No Prescaler)
7
18
33
ms
VDD = 5V, -40˚C to +125˚C
Oscillation Start-up Timer Period
—
1024TOSC
—
—
TOSC = OSC1 period
Power up Timer Period
28
72
132
ms
VDD = 5V, -40˚C to +125˚C
—
—
2.1
µs
100
—
—
µs
—
TBD
—
µs
32
Tost
33*
Tpwrt
34
TIOZ
I/O Hi-impedance from MCLR Low
or Watchdog Timer Reset
35
TBOR
Brown-out Reset pulse width
TPER
Parity Error Reset
36
*
†
Characteristic
Min
Typ†
Max
Units
Conditions
VDD ≤ BVDD (D005)
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
DS30272A-page 120
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 13-6: TIMER0 CLOCK TIMINGS
RA4/T0CKI
41
40
42
TMR0
Note: Refer to Figure 13-1 for load conditions.
TABLE 13-5:
TIMER0 CLOCK REQUIREMENTS
Param
No.
Sym
Characteristic
40
Tt0H
T0CKI High Pulse Width
41
Tt0L
T0CKI Low Pulse Width
42
Tt0P
T0CKI Period
Min
No Prescaler
With Prescaler
No Prescaler
With Prescaler
48
Tcke2tmrI Delay from external clock edge to timer increment
*
†
0.5TCY + 20*
Typ† Max Units Conditions
—
—
ns
10*
—
—
ns
0.5TCY + 20*
—
—
ns
10*
—
—
ns
Greater of:
20µs or TCY + 40*
N
—
—
ns
2Tosc
—
7Tosc
—
N = prescale value
(1, 2, 4,..., 256)
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 121
PIC16C71X
Applicable Devices
TABLE 13-6:
Parameter
No.
710 71 711 715
A/D CONVERTER CHARACTERISTICS:
PIC16C715-04 (COMMERCIAL, INDUSTRIAL, EXTENDED)
PIC16C715-10 (COMMERCIAL, INDUSTRIAL, EXTENDED)
PIC16C715-20 (COMMERCIAL, INDUSTRIAL, EXTENDED)
Sym
Characteristic
Min
Typ†
Max
Units
Conditions
Resolution
—
—
8-bits
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NINT
Integral error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NDIF
Differential error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NFS
Full scale error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NOFF
Offset error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
—
Monotonicity
—
guaranteed
—
—
VSS ≤ AIN ≤ VREF
2.5V
—
VDD + 0.3
V
NR
VREF
Reference voltage
VAIN
Analog input voltage
VSS - 0.3
—
VREF + 0.3
V
ZAIN
Recommended
impedance of analog
voltage source
—
—
10.0
kΩ
IAD
A/D conversion current (VDD)
—
180
—
µA
Average current consumption when
A/D is on. (Note 1)
IREF
VREF input current
(Note 2)
—
—
1
10
mA
µA
During sampling
All other times
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: When A/D is off, it will not consume any current other than minor leakage current. The power-down current spec includes
any such leakage from the A/D module.
2: VREF current is from RA3 pin or VDD pin, whichever is selected as reference input.
DS30272A-page 122
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
TABLE 13-7:
Parameter
No.
710 71 711 715
A/D CONVERTER CHARACTERISTICS:
PIC16LC715-04 (COMMERCIAL, INDUSTRIAL)
Sym
Characteristic
Min
Typ†
Max
Units
Conditions
Resolution
—
—
8-bits
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NINT
Integral error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NDIF
Differential error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NFS
Full scale error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
NOFF
Offset error
—
—
less than
±1 LSb
—
VREF = VDD, VSS ≤ AIN ≤ VREF
—
Monotonicity
—
guaranteed
—
—
VSS ≤ AIN ≤ VREF
V
NR
VREF
Reference voltage
VAIN
Analog input voltage
2.5V
—
VDD + 0.3
VSS - 0.3
—
VREF + 0.3
ZAIN
V
Recommended
impedance of analog voltage source
—
—
10.0
kΩ
IAD
A/D conversion current (VDD)
—
90
—
µA
Average current consumption when
A/D is on. (Note 1)
IREF
VREF input current
(Note 2)
—
—
1
10
mA
µA
During sampling
All other times
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: When A/D is off, it will not consume any current other than minor leakage current. The power-down current spec includes
any such leakage from the A/D module.
2: VREF current is from RA3 pin or VDD pin, whichever is selected as reference input.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 123
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 13-7: A/D CONVERSION TIMING
BSF ADCON0, GO
1 Tcy
(TOSC/2) (1)
131
Q4
130
132
A/D CLK
7
A/D DATA
6
5
4
3
2
1
NEW_DATA
OLD_DATA
ADRES
0
ADIF
GO
DONE
SAMPLING STOPPED
SAMPLE
Note 1: If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the
SLEEP instruction to be executed.
TABLE 13-8:
A/D CONVERSION REQUIREMENTS
Parameter
No.
Sym
Characteristic
Min
130
TAD
A/D clock period
1.6
2.0
130
TAD
A/D Internal RC
Oscillator source
131
TCNV
Conversion time
(not including S/H
time). Note 1
132
TACQ
Acquisition time
Typ†
Max
Units
—
—
µs
µs
Conditions
VREF ≥ 3.0V
VREF full range
ADCS1:ADCS0 = 11
(RC oscillator source)
3.0
6.0
9.0
µs
PIC16LC715, VDD = 3.0V
2.0
4.0
6.0
µs
PIC16C715
—
9.5TAD
—
—
Note 2
20
—
µs
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: ADRES register may be read on the following TCY cycle.
DS30272A-page 124
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
14.0
710 71 711 715
DC AND AC CHARACTERISTICS GRAPHS AND TABLES FOR PIC16C715
The graphs and tables provided in this section are for design guidance and are not tested or guaranteed.
In some graphs or tables the data presented are outside specified operating range (i.e., outside specified VDD
range). This is for information only and devices are guaranteed to operate properly only within the specified
range.
Note:
The data presented in this section is a statistical summary of data collected on units from different lots over
a period of time and matrix samples. 'Typical' represents the mean of the distribution at, 25°C, while 'max'
or 'min' represents (mean +3σ) and (mean -3σ) respectively where σ is standard deviation.
FIGURE 14-1: TYPICAL IPD vs. VDD (WDT DISABLED, RC MODE)
35
30
IPD(nA)
25
20
15
10
Shaded area is beyond
recommended range.
5
0
2.5
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
FIGURE 14-2: MAXIMUM IPD vs. VDD (WDT DISABLED, RC MODE)
10.000
85°C
70°C
IPD(µA)
1.000
25°C
0.100
0°C
-40°C
0.010
Shaded area is beyond
recommended range.
0.001
2.5
3.0
1997 Microchip Technology Inc.
3.5
Powered by ICminer.com Electronic-Library Service CopyRight 2003
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
DS30272A-page 125
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 14-3: TYPICAL IPD vs. VDD @ 25°C
(WDT ENABLED, RC MODE)
FIGURE 14-5: TYPICAL RC OSCILLATOR
FREQUENCY vs. VDD
Cext = 22 pF, T = 25°C
6.0
25
5.5
5.0
20
Fosc(MHz)
IPD(µA)
4.5
15
10
R = 5k
4.0
3.5
3.0
R = 10k
2.5
2.0
5
1.5
0
2.5
1.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
VDD(Volts)
0.0
2.5
Shaded area is beyond recommended range.
FIGURE 14-4: MAXIMUM IPD vs. VDD (WDT
ENABLED, RC MODE)
35
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
6.0
FIGURE 14-6: TYPICAL RC OSCILLATOR
FREQUENCY vs. VDD
Cext = 100 pF, T = 25°C
2.4
0°C
2.2
25
R = 3.3k
2.0
1.8
Fosc(MHz)
20
70°C
15
85°C
10
1.6
R = 5k
1.4
1.2
1.0
R = 10k
0.8
5
0
2.5
5.5
Shaded area is beyond recommended range.
-40°C
30
IPD(µA)
R = 100k
0.5
0.6
0.4
3.0
3.5
4.0
4.5
5.0
5.5
6.0
R = 100k
0.2
VDD(Volts)
0.0
2.5
3.0
3.5
Shaded area is beyond recommended range.
4.0
4.5
5.0
5.5
6.0
VDD(Volts)
Shaded area is beyond recommended range.
FIGURE 14-7: TYPICAL RC OSCILLATOR
FREQUENCY vs. VDD
Cext = 300 pF, T = 25°C
1000
900
Fosc(kHz)
800
R = 3.3k
700
600
R = 5k
500
400
R = 10k
300
200
R = 100k
100
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
VDD(Volts)
Shaded area is beyond recommended range.
DS30272A-page 126
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 14-8: TYPICAL IPD vs. VDD BROWNOUT DETECT ENABLED (RC
MODE)
710 71 711 715
FIGURE 14-10: TYPICAL IPD vs. TIMER1
ENABLED (32 kHz, RC0/RC1 =
33 pF/33 pF, RC MODE)
1400
30
1200
25
Device NOT in
Brown-out Reset
800
20
600
400
200
0
2.5
IPD(µA)
IPD(µA)
1000
Device in
Brown-out
Reset
15
10
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
5
6.0
0
2.5
This shaded region represents the built-in hysteresis of
the brown-out reset circuitry.
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
Shaded area is beyond recommended range.
Shaded area is beyond recommended range.
FIGURE 14-11: MAXIMUM IPD vs. TIMER1
ENABLED
(32 kHz, RC0/RC1 = 33 pF/33
pF, 85°C TO -40°C, RC MODE)
FIGURE 14-9: MAXIMUM IPD vs. VDD
BROWN-OUT DETECT
ENABLED
(85°C TO -40°C, RC MODE)
1600
45
1400
40
1200
35
800
600
400
30
Device NOT in
Brown-out Reset
IPD(µA)
IPD(µA)
1000
Device in
Brown-out
Reset
10
5
4.3
3.0
3.5
20
15
200
0
2.5
25
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
This shaded region represents the built-in hysteresis of
the brown-out reset circuitry.
0
2.5
3.0
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
Shaded area is beyond recommended range.
Shaded area is beyond recommended range.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 127
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 14-12: TYPICAL IDD vs. FREQUENCY (RC MODE @ 22 pF, 25°C)
2000
1800
5.5V
5.0V
1600
4.5V
IDD(µA)
1400
4.0V
1200
3.5V
1000
3.0V
800
2.5V
600
400
200
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency(MHz)
3.5
4.0
4.5
Shaded area is
beyond recommended range
FIGURE 14-13: MAXIMUM IDD vs. FREQUENCY (RC MODE @ 22 pF, -40°C TO 85°C)
2000
1800
5.5V
5.0V
1600
4.5V
IDD(µA)
1400
4.0V
1200
3.5V
1000
3.0V
800
2.5V
600
400
200
0
0.0
0.5
1.0
1.5
2.0
2.5
Frequency(MHz)
DS30272A-page 128
Powered by ICminer.com Electronic-Library Service CopyRight 2003
3.0
3.5
4.0
4.5
Shaded area is
beyond recommended range
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 14-14: TYPICAL IDD vs. FREQUENCY (RC MODE @ 100 pF, 25°C)
1600
1400
5.5V
5.0V
1200
4.5V
4.0V
1000
IDD(µA)
3.5V
3.0V
800
2.5V
600
400
200
0
0
200
400
Shaded area is
beyond recommended range
600
800
1000
1200
1400
1600
1800
Frequency(kHz)
FIGURE 14-15: MAXIMUM IDD vs. FREQUENCY (RC MODE @ 100 pF, -40°C TO 85°C)
1600
1400
5.5V
5.0V
1200
4.5V
4.0V
1000
IDD(µA)
3.5V
3.0V
800
2.5V
600
400
200
0
0
200
400
Shaded area is
beyond recommended range
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
600
800
1000
1200
1400
1600
1800
Frequency(kHz)
DS30272A-page 129
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 14-16: TYPICAL IDD vs. FREQUENCY (RC MODE @ 300 pF, 25°C)
1200
5.5V
1000
5.0V
4.5V
4.0V
800
3.5V
IDD(µA)
3.0V
600
2.5V
400
200
0
0
100
200
300
400
500
600
700
Frequency(kHz)
FIGURE 14-17: MAXIMUM IDD vs. FREQUENCY (RC MODE @ 300 pF, -40°C TO 85°C)
1200
5.5V
1000
5.0V
4.5V
4.0V
800
IDD(µA)
3.5V
3.0V
600
2.5V
400
200
0
0
100
200
300
400
500
600
700
Frequency(kHz)
DS30272A-page 130
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 14-18: TYPICAL IDD vs.
CAPACITANCE @ 500 kHz
(RC MODE)
FIGURE 14-19: TRANSCONDUCTANCE(gm)
OF HS OSCILLATOR vs. VDD
600
4.0
Max -40°C
5.0V
500
3.5
3.0
gm(mA/V)
4.0V
400
IDD(µA)
710 71 711 715
3.0V
300
200
2.5
Typ 25°C
2.0
Min 85°C
1.5
1.0
100
0.5
0
20 pF
100 pF
0.0
3.0
300 pF
Capacitance(pF)
TABLE 14-1:
Rext
300 pF
5.0
5.5
VDD(Volts)
6.0
6.5
7.0
110
100
5k
4.12 MHz
± 1.4%
90
10k
2.35 MHz
± 1.4%
80
100k
268 kHz
± 1.1%
3.3k
1.80 MHz
± 1.0%
5k
1.27 MHz
± 1.0%
10k
688 kHz
± 1.2%
100k
77.2 kHz
± 1.0%
3.3k
707 kHz
± 1.4%
5k
501 kHz
± 1.2%
10k
269 kHz
± 1.6%
100k
28.3 kHz
± 1.1%
The percentage variation indicated here is part to
part variation due to normal process distribution. The
variation indicated is ±3 standard deviation from
average value for VDD = 5V.
gm(µA/V)
100 pF
4.5
FIGURE 14-20: TRANSCONDUCTANCE(gm)
OF LP OSCILLATOR vs. VDD
Fosc @ 5V, 25°C
22 pF
4.0
Shaded area is beyond recommended range.
RC OSCILLATOR
FREQUENCIES
Average
Cext
3.5
Max -40°C
70
60
Typ 25°C
50
40
30
20
Min 85°C
10
0
2.0
2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
7.0
VDD(Volts)
Shaded area is beyond recommended range.
FIGURE 14-21: TRANSCONDUCTANCE(gm)
OF XT OSCILLATOR vs. VDD
1000
900
Max -40°C
800
gm(µA/V)
700
600
Typ 25°C
500
400
300
Min 85°C
200
100
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
7.0
VDD(Volts)
Shaded area is beyond recommended range.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 131
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 14-22: TYPICAL XTAL STARTUP
TIME vs. VDD (LP MODE, 25°C)
FIGURE 14-24: TYPICAL XTAL STARTUP
TIME vs. VDD (XT MODE, 25°C)
3.5
70
3.0
60
50
Startup Time(ms)
Startup Time(Seconds)
2.5
2.0
32 kHz, 33 pF/33 pF
1.5
1.0
40
200 kHz, 68 pF/68 pF
30
200 kHz, 47 pF/47 pF
20
1 MHz, 15 pF/15 pF
10
0.5
0.0
2.5
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
TABLE 14-2:
FIGURE 14-23: TYPICAL XTAL STARTUP
TIME vs. VDD (HS MODE,
25°C)
Osc Type
7
LP
6
XT
20 MHz, 33 pF/33 pF
4
HS
8 MHz, 33 pF/33 pF
3
20 MHz, 15 pF/15 pF
8 MHz, 15 pF/15 pF
2
1
4.0
4.5
5.0
VDD(Volts)
3.5
4.0
4.5
VDD(Volts)
5.0
5.5
6.0
Shaded area is beyond recommended range.
Shaded area is beyond recommended range.
5
3.0
6.0
VDD(Volts)
Startup Time(ms)
4 MHz, 15 pF/15 pF
200 kHz, 15 pF/15 pF
5.5
Shaded area is beyond recommended range.
DS30272A-page 132
Powered by ICminer.com Electronic-Library Service CopyRight 2003
6.0
CAPACITOR SELECTION
FOR CRYSTAL
OSCILLATORS
Crystal
Freq
Cap. Range
C1
Cap. Range
C2
33 pF
32 kHz
33 pF
200 kHz
15 pF
15 pF
200 kHz
47-68 pF
47-68 pF
1 MHz
15 pF
15 pF
4 MHz
15 pF
15 pF
4 MHz
15 pF
15 pF
8 MHz
15-33 pF
15-33 pF
20 MHz
15-33 pF
15-33 pF
Crystals
Used
32 kHz
Epson C-001R32.768K-A
± 20 PPM
200 kHz
STD XTL 200.000KHz
± 20 PPM
1 MHz
ECS ECS-10-13-1
± 50 PPM
4 MHz
ECS ECS-40-20-1
± 50 PPM
8 MHz
EPSON CA-301 8.000M-C
± 30 PPM
20 MHz
EPSON CA-301 20.000M-C
± 30 PPM
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 14-25: TYPICAL IDD vs. FREQUENCY
(LP MODE, 25°C)
710 71 711 715
FIGURE 14-27: TYPICAL IDD vs. FREQUENCY
(XT MODE, 25°C)
1800
1600
120
5.5V
1400
100
5.0V
1200
4.5V
1000
4.0V
60
40
20
0
0
5.5V
5.0V
4.5V
4.0V
3.5V
3.0V
2.5V
IDD(µA)
IDD(µA)
80
3.5V
800
3.0V
600
2.5V
400
50
100
150
200
200
Frequency(kHz)
0
0.0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
Frequency(MHz)
FIGURE 14-26: MAXIMUM IDD vs.
FREQUENCY
(LP MODE, 85°C TO -40°C)
FIGURE 14-28: MAXIMUM IDD vs.
FREQUENCY
(XT MODE, -40°C TO 85°C)
1800
140
1600
5.5V
100
1200
80
1000
4.0V
800
3.5V
60
40
20
0
0
IDD(µA)
1400
IDD(µA)
120
5.5V
5.0V
4.5V
4.0V
3.5V
3.0V
2.5V
5.0V
4.5V
3.0V
600
2.5V
400
200
50
100
150
Frequency(kHz)
200
0
0.0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
Frequency(MHz)
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 133
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 14-29: TYPICAL IDD vs. FREQUENCY
(HS MODE, 25°C)
7.0
FIGURE 14-30: MAXIMUM IDD vs.
FREQUENCY
(HS MODE, -40°C TO 85°C)
7.0
6.0
6.0
5.0
IDD(mA)
IDD(mA)
5.0
4.0
3.0
2.0
1.0
0.0
1 2
5.5V
5.0V
4.5V
4.0V
4.0
3.0
2.0
1.0
4
6
8
10
12
14
16
Frequency(MHz)
18
20
0.0
1 2
5.5V
5.0V
4.5V
4.0V
4
6
8
10
12
14
16
18
20
Frequency(MHz)
DS30272A-page 134
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
15.0
710 71 711 715
ELECTRICAL CHARACTERISTICS FOR PIC16C71
Absolute Maximum Ratings †
Ambient temperature under bias................................................................................................................ .-55 to +125˚C
Storage temperature .............................................................................................................................. -65˚C to +150˚C
Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4).......................................... -0.3V to (VDD + 0.3V)
Voltage on VDD with respect to VSS .......................................................................................................... -0.3 to +7.5V
Voltage on MCLR with respect to VSS (Note 2)..................................................................................................0 to +14V
Voltage on RA4 with respect to Vss ...................................................................................................................0 to +14V
Total power dissipation (Note 1)...........................................................................................................................800 mW
Maximum current out of VSS pin ...........................................................................................................................150 mA
Maximum current into VDD pin ..............................................................................................................................100 mA
Input clamp current, IIK (VI < 0 or VI > VDD).....................................................................................................................± 20 mA
Output clamp current, IOK (VO < 0 or VO > VDD) .............................................................................................................± 20 mA
Maximum output current sunk by any I/O pin..........................................................................................................25 mA
Maximum output current sourced by any I/O pin ....................................................................................................20 mA
Maximum current sunk by PORTA ..........................................................................................................................80 mA
Maximum current sourced by PORTA .....................................................................................................................50 mA
Maximum current sunk by PORTB........................................................................................................................150 mA
Maximum current sourced by PORTB...................................................................................................................100 mA
Note 1: Power dissipation is calculated as follows: Pdis = VDD x {IDD - ∑ IOH} + ∑ {(VDD-VOH) x IOH} + ∑(VOl x IOL)
Note 2: Voltage spikes below VSS at the MCLR pin, inducing currents greater than 80 mA, may cause latch-up. Thus,
a series resistor of 50-100Ω should be used when applying a “low” level to the MCLR pin rather than pulling
this pin directly to VSS.
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 15-1:
OSC
CROSS REFERENCE OF DEVICE SPECS FOR OSCILLATOR CONFIGURATIONS
AND FREQUENCIES OF OPERATION (COMMERCIAL DEVICES)
PIC16C71-04
PIC16C71-20
PIC16LC71-04
JW Devices
RC
VDD: 4.0V to 6.0V
IDD: 3.3 mA max. at 5.5V
IPD: 14 µA max. at 4V
Freq:4 MHz max.
VDD: 4.5V to 5.5V
IDD: 1.8 mA typ. at 5.5V
IPD: 1.0 µA typ. at 4V
Freq: 4 MHz max.
VDD: 3.0V to 6.0V
IDD: 1.4 mA typ. at 3.0V
IPD: 0.6 µA typ. at 3V
Freq: 4 MHz max.
VDD: 4.0V to 6.0V
IDD: 3.3 mA max. at 5.5V
IPD: 14 µA max. at 4V
Freq:4 MHz max.
XT
VDD: 4.0V to 6.0V
IDD: 3.3 mA max. at 5.5V
IPD: 14 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 1.8 mA typ. at 5.5V
IPD: 1.0 µA typ. at 4V
Freq: 4 MHz max.
VDD: 3.0V to 6.0V
IDD: 1.4 mA typ. at 3.0V
IPD: 0.6 µA typ. at 3V
Freq: 4 MHz max.
VDD: 4.0V to 6.0V
IDD: 3.3 mA max. at 5.5V
IPD: 14 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
IDD: 13.5 mA typ. at 5.5V
IDD: 30 mA max. at 5.5V
IPD: 1.0 µA typ. at 4.5V
IPD: 1.0 µA typ. at 4.5V
Freq: 4 MHz max.
Freq: 20 MHz max.
HS
LP
VDD: 4.0V to 6.0V
IDD: 15 µA typ. at 32 kHz,
4.0V
IPD: 0.6 µA typ. at 4.0V
Freq: 200 kHz max.
Not recommended for use
in LP mode
VDD: 4.5V to 5.5V
Not recommended for use in
HS mode
IDD: 30 mA max. at 5.5V
IPD: 1.0 µA typ. at 4.5V
Freq: 20 MHz max.
VDD: 3.0V to 6.0V
IDD: 32 µA max. at 32 kHz,
3.0V
IPD: 9 µA max. at 3.0V
Freq: 200 kHz max.
VDD: 3.0V to 6.0V
IDD: 32 µA max. at 32 kHz,
3.0V
IPD: 9 µA max. at 3.0V
Freq: 200 kHz max.
The shaded sections indicate oscillator selections which are tested for functionality, but not for MIN/MAX specifications. It is recommended that the user select the device type that ensures the specifications required.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 135
PIC16C71X
Applicable Devices
15.1
710 71 711 715
DC Characteristics:
PIC16C71-04 (Commercial, Industrial)
PIC16C71-20 (Commercial, Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
DC CHARACTERISTICS
Param
No.
Characteristic
Sym
Min
D001 Supply Voltage
D001A
VDD
4.0
4.5
-
6.0
5.5
V
V
D002*
RAM Data Retention
Voltage (Note 1)
VDR
-
1.5
-
V
D003
VDD start voltage to
ensure internal Power-on
Reset signal
VPOR
-
VSS
-
V
D004*
VDD rise rate to ensure
internal Power-on Reset
signal
SVDD
0.05
-
-
D010
Supply Current (Note 2)
IDD
-
1.8
3.3
mA
XT, RC osc configuration
FOSC = 4 MHz, VDD = 5.5V (Note 4)
-
13.5
30
mA
HS osc configuration
FOSC = 20 MHz, VDD = 5.5V
-
7
1.0
1.0
28
14
16
µA
µA
µA
VDD = 4.0V, WDT enabled, -40°C to +85°C
VDD = 4.0V, WDT disabled, -0°C to +70°C
VDD = 4.0V, WDT disabled, -40°C to +85°C
D013
D020 Power-down Current
D021 (Note 3)
D021A
*
†
Note 1:
2:
3:
4:
IPD
Typ† Max Units
Conditions
XT, RC and LP osc configuration
HS osc configuration
See section on Power-on Reset for details
V/ms See section on Power-on Reset for details
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance
only and are not tested.
This is the limit to which VDD can be lowered without losing RAM data.
The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern, and temperature also have an
impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail to rail; all I/O pins tristated, pulled to VDD
MCLR = VDD; WDT enabled/disabled as specified.
The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS.
For RC osc configuration, current through Rext is not included. The current through the resistor can be estimated by the formula Ir = VDD/2Rext (mA) with Rext in kOhm.
DS30272A-page 136
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
15.2
DC Characteristics:
PIC16LC71-04 (Commercial, Industrial)
Standard Operating Conditions (unless otherwise stated)
OOperating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
DC CHARACTERISTICS
Param
No.
Characteristic
710 71 711 715
Sym
Min
Typ† Max Units
Conditions
D001
Supply Voltage
VDD
3.0
-
6.0
V
D002*
RAM Data Retention
Voltage (Note 1)
VDR
-
1.5
-
V
D003
VDD start voltage to
ensure internal Power-on
Reset signal
VPOR
-
VSS
-
V
D004*
VDD rise rate to ensure
internal Power-on Reset
signal
SVDD
0.05
-
-
D010
Supply Current (Note 2)
IDD
-
1.4
2.5
mA
XT, RC osc configuration
FOSC = 4 MHz, VDD = 3.0V (Note 4)
-
15
32
µA
LP osc configuration
FOSC = 32 kHz, VDD = 3.0V, WDT disabled
-
5
0.6
0.6
20
9
12
µA
µA
µA
VDD = 3.0V, WDT enabled, -40°C to +85°C
VDD = 3.0V, WDT disabled, 0°C to +70°C
VDD = 3.0V, WDT disabled, -40°C to +85°C
D010A
D020
D021
D021A
*
†
Note 1:
2:
3:
4:
Power-down Current
(Note 3)
IPD
XT, RC, and LP osc configuration
See section on Power-on Reset for details
V/ms See section on Power-on Reset for details
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only
and are not tested.
This is the limit to which VDD can be lowered without losing RAM data.
The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern, and temperature also have an
impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail to rail; all I/O pins tristated, pulled to VDD
MCLR = VDD; WDT enabled/disabled as specified.
The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS.
For RC osc configuration, current through Rext is not included. The current through the resistor can be estimated by the formula Ir = VDD/2Rext (mA) with Rext in kOhm.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 137
PIC16C71X
Applicable Devices
15.3
710 71 711 715
DC Characteristics:
PIC16C71-04 (Commercial, Industrial)
PIC16C71-20 (Commercial, Industrial)
PIC16LC71-04 (Commercial, Industrial)
DC CHARACTERISTICS
Param
No.
D030
D031
D032
D033
D040
D040A
D041
D042
D042A
D043
D070
Characteristic
Input Low Voltage
I/O ports
with TTL buffer
with Schmitt Trigger buffer
MCLR, OSC1 (in RC mode)
OSC1 (in XT, HS and LP)
Input High Voltage
I/O ports (Note 4)
with TTL buffer
D060
with Schmitt Trigger buffer
MCLR, RB0/INT
OSC1 (XT, HS and LP)
OSC1 (in RC mode)
PORTB weak pull-up current
Input Leakage Current (Notes 2, 3)
I/O ports
D061
D063
MCLR, RA4/T0CKI
OSC1
D080
Output Low Voltage
I/O ports
D083
OSC2/CLKOUT (RC osc config)
D090
Output High Voltage
I/O ports (Note 3)
D092
D130*
†
Note 1:
2:
3:
4:
Standard Operating Conditions (unless otherwise stated)
OOperating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
Operating voltage VDD range as described in DC spec Section 15.1
and Section 15.2.
Sym
Min Typ Max Units
Conditions
†
VIL
VSS
VSS
VSS
VSS
-
0.15V
0.8V
0.2VDD
0.3VDD
V
V
V
V
For entire VDD range
4.5 ≤ VDD ≤ 5.5V
Note1
VIH
2.0
VDD
0.25VDD VDD
+ 0.8V
VDD
0.85VDD 0.85VDD VDD
0.7VDD VDD
0.9VDD VDD
IPURB
50
250 †400
IIL
VOL
V
For entire VDD range
V
V Note1
V
µA VDD = 5V, VPIN = VSS
-
-
±1
-
-
±5
±5
-
-
0.6
V
-
-
0.6
V
-
V
VOH VDD - 0.7 -
4.5 ≤ VDD ≤ 5.5V
For entire VDD range
µA Vss ≤ VPIN ≤ VDD, Pin at hiimpedance
µA Vss ≤ VPIN ≤ VDD
µA Vss ≤ VPIN ≤ VDD, XT, HS and
LP osc configuration
IOL = 8.5mA, VDD = 4.5V,
-40°C to +85°C
IOL = 1.6mA, VDD = 4.5V,
-40°C to +85°C
IOH = -3.0mA, VDD = 4.5V,
-40°C to +85°C
OSC2/CLKOUT (RC osc config)
VDD - 0.7 V IOH = -1.3mA, VDD = 4.5V,
-40°C to +85°C
Open-Drain High Voltage
VOD
14
V RA4 pin
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
In RC oscillator configuration, the OSC1 pin is a Schmitt trigger input. It is not recommended that the
PIC16C71 be driven with external clock in RC mode.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
Negative current is defined as current sourced by the pin.
PIC16C71 Rev. "Ax" INT pin has a TTL input buffer. PIC16C71 Rev. "Bx" INT pin has a Schmitt Trigger input
buffer.
DS30272A-page 138
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
DC CHARACTERISTICS
Param
No.
Characteristic
Capacitive Loading Specs on
Output Pins
OSC2 pin
D100
D101
†
Note 1:
2:
3:
4:
710 71 711 715
Standard Operating Conditions (unless otherwise stated)
OOperating temperature 0˚C
≤ TA ≤ +70˚C (commercial)
-40˚C ≤ TA ≤ +85˚C (industrial)
Operating voltage VDD range as described in DC spec Section 15.1
and Section 15.2.
Sym
Min Typ Max Units
Conditions
†
COSC2
15
pF
In XT, HS and LP modes when
external clock is used to drive
OSC1.
All I/O pins and OSC2 (in RC mode) CIO
50
pF
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
In RC oscillator configuration, the OSC1 pin is a Schmitt trigger input. It is not recommended that the
PIC16C71 be driven with external clock in RC mode.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
Negative current is defined as current sourced by the pin.
PIC16C71 Rev. "Ax" INT pin has a TTL input buffer. PIC16C71 Rev. "Bx" INT pin has a Schmitt Trigger input
buffer.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 139
PIC16C71X
Applicable Devices
15.4
710 71 711 715
Timing Parameter Symbology
The timing parameter symbols have been created following one of the following formats:
1. TppS2ppS
2. TppS
T
F
Frequency
Lowercase letters (pp) and their meanings:
pp
cc
CCP1
ck
CLKOUT
cs
CS
di
SDI
do
SDO
dt
Data in
io
I/O port
mc
MCLR
Uppercase letters and their meanings:
S
F
Fall
H
High
I
Invalid (Hi-impedance)
L
Low
T
Time
osc
rd
rw
sc
ss
t0
t1
wr
OSC1
RD
RD or WR
SCK
SS
T0CKI
T1CKI
WR
P
R
V
Z
Period
Rise
Valid
Hi-impedance
FIGURE 15-1: LOAD CONDITIONS
Load condition 1
Load condition 2
VDD/2
RL
CL
Pin
CL
Pin
VSS
VSS
RL = 464Ω
CL = 50 pF
15 pF
for all pins except OSC2/CLKOUT
for OSC2 output
DS30272A-page 140
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
15.5
710 71 711 715
Timing Diagrams and Specifications
FIGURE 15-2: EXTERNAL CLOCK TIMING
Q4
Q1
Q2
Q3
Q4
Q1
OSC1
3
1
3
4
4
2
CLKOUT
TABLE 15-2:
Parameter
No.
EXTERNAL CLOCK TIMING REQUIREMENTS
Sym
Characteristic
Fosc
External CLKIN Frequency
(Note 1)
Min
Typ†
Max
Units Conditions
DC
—
4
MHz XT osc mode
DC
—
4
MHz HS osc mode (-04)
DC
—
20
MHz HS osc mode (-20)
DC
—
200
kHz LP osc mode
Oscillator Frequency
DC
—
4
MHz RC osc mode
(Note 1)
0.1
—
4
MHz XT osc mode
1
—
4
MHz HS osc mode
1
—
20
MHz HS osc mode
1
Tosc External CLKIN Period
250
—
—
ns
XT osc mode
(Note 1)
250
—
—
ns
HS osc mode (-04)
50
—
—
ns
HS osc mode (-20)
5
—
—
µs
LP osc mode
Oscillator Period
250
—
—
ns
RC osc mode
(Note 1)
250
—
10,000
ns
XT osc mode
250
—
1,000
ns
HS osc mode (-04)
50
—
1,000
ns
HS osc mode (-20)
5
—
—
µs
LP osc mode
1.0
TCY
DC
µs
TCY = 4/Fosc
2
TCY Instruction Cycle Time (Note 1)
3
TosL, External Clock in (OSC1) High or
50
—
—
ns
XT oscillator
TosH Low Time
2.5
—
—
µs
LP oscillator
10
—
—
ns
HS oscillator
4
TosR, External Clock in (OSC1) Rise or
25
—
—
ns
XT oscillator
TosF Fall Time
50
—
—
ns
LP oscillator
15
—
—
ns
HS oscillator
† Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: Instruction cycle period (TCY) equals four times the input oscillator time-base period. All specified values are based on
characterization data for that particular oscillator type under standard operating conditions with the device executing code.
Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. All devices are tested to operate at "min." values with an external clock applied to the OSC1/CLKIN pin.
When an external clock input is used, the "Max." cycle time limit is "DC" (no clock) for all devices. OSC2 is disconnected
(has no loading) for the PIC16C71.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 141
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 15-3: CLKOUT AND I/O TIMING
Q1
Q4
Q2
Q3
OSC1
11
10
CLKOUT
13
19
14
12
18
16
I/O Pin
(input)
15
17
I/O Pin
(output)
new value
old value
20, 21
Note: Refer to Figure 15-1 for load conditions.
TABLE 15-3:
CLKOUT AND I/O TIMING REQUIREMENTS
Parameter Sym
No.
Characteristic
Min
Typ†
Max
Units Conditions
10*
TosH2ckL
OSC1↑ to CLKOUT↓
—
15
30
ns
Note 1
11*
TosH2ckH
OSC1↑ to CLKOUT↑
—
15
30
ns
Note 1
12*
TckR
CLKOUT rise time
—
5
15
ns
Note 1
13*
TckF
CLKOUT fall time
—
5
15
ns
Note 1
14*
TckL2ioV
CLKOUT ↓ to Port out valid
15*
TioV2ckH
Port in valid before CLKOUT ↑
16*
TckH2ioI
17*
TosH2ioV
18*
TosH2ioI
OSC1↑ (Q2 cycle) to
Port input invalid (I/O in
hold time)
—
—
0.5TCY + 20
ns
Note 1
0.25TCY + 25
—
—
ns
Note 1
Port in hold after CLKOUT ↑
0
—
—
ns
Note 1
OSC1↑ (Q1 cycle) to
Port out valid
—
—
80 - 100
ns
PIC16C71
100
—
—
ns
PIC16LC71
200
—
—
ns
19*
TioV2osH
Port input valid to OSC1↑ (I/O in setup time)
0
—
—
ns
20*
TioR
Port output rise time
PIC16C71
—
10
25
ns
PIC16LC71
—
—
60
ns
PIC16C71
—
10
25
ns
PIC16LC71
—
—
60
ns
21*
TioF
Port output fall time
22††*
Tinp
INT pin high or low time
20
—
—
ns
23††*
Trbp
RB7:RB4 change INT high or low time
20
—
—
ns
* These parameters are characterized but not tested.
†Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance
only and are not tested.
†† These parameters are asynchronous events not related to any internal clock edges.
Note 1: Measurements are taken in RC Mode where CLKOUT output is 4 x TOSC.
DS30272A-page 142
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 15-4: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP
TIMER TIMING
VDD
MCLR
30
Internal
POR
33
PWRT
Time-out
32
OSC
Time-out
Internal
RESET
Watchdog
Timer
RESET
31
34
34
I/O Pins
Note: Refer to Figure 15-1 for load conditions.
TABLE 15-4:
RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP
TIMER REQUIREMENTS
Parameter
No.
Sym
Characteristic
Min
200
—
—
ns
VDD = 5V, -40˚C to +85˚C
7*
18
33*
ms
VDD = 5V, -40˚C to +85˚C
Oscillation Start-up Timer Period
—
1024 TOSC
—
—
TOSC = OSC1 period
Power-up Timer Period
28*
72
132*
ms
VDD = 5V, -40˚C to +85˚C
I/O High Impedance from MCLR
Low
—
—
100
ns
30
TmcL
MCLR Pulse Width (low)
31
Twdt
Watchdog Timer Time-out Period
32
Tost
33
Tpwrt
34
TIOZ
Typ†
Max
Units
Conditions
(No Prescaler)
*
†
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only
and are not tested.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 143
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 15-5: TIMER0 EXTERNAL CLOCK TIMINGS
RA4/T0CKI
41
40
42
TMR0
Note: Refer to Figure 15-1 for load conditions.
TABLE 15-5:
Param
No.
40*
TIMER0 EXTERNAL CLOCK REQUIREMENTS
Sym Characteristic
Tt0H T0CKI High Pulse Width
Min
No Prescaler
With Prescaler
41*
Tt0L T0CKI Low Pulse Width
No Prescaler
With Prescaler
42*
Tt0P T0CKI Period
No Prescaler
With Prescaler
*
†
Typ† Max Units Conditions
0.5TCY + 20
—
—
ns
10
—
—
ns
0.5TCY + 20
—
—
ns
10
—
—
ns
TCY + 40
—
—
ns
Greater of:
20 ns or TCY + 40
N
Must also meet
parameter 42
Must also meet
parameter 42
N = prescale value
(2, 4,..., 256)
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25˚C unless otherwise stated. These parameters are for design guidance only and are not
tested.
DS30272A-page 144
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
TABLE 15-6:
Param
No.
A01
A02
A/D CONVERTER CHARACTERISTICS
Sym Characteristic
NR
Resolution
EABS Absolute error
PIC16C71
PIC16LC71
A03
EIL
Integral linearity error
A04
EDL
Differential linearity error
A05
EFS
Full scale error
A06
EOFF Offset error
PIC16C71
PIC16LC71
PIC16C71
PIC16LC71
PIC16C71
PIC16LC71
PIC16C71
PIC16LC71
A10
—
710 71 711 715
Monotonicity
Min
Typ†
Max
Units
Conditions
—
—
8 bits
bits
VREF = VDD = 5.12V,
VSS ≤ VAIN ≤ VREF
—
—
< ±1
LSb
VREF = VDD = 5.12V,
VSS ≤ VAIN ≤ VREF
—
—
< ±2
LSb
VREF = VDD = 3.0V (Note 3)
—
—
< ±1
LSb
VREF = VDD = 5.12V,
VSS ≤ VAIN ≤ VREF
—
—
< ±2
LSb
VREF = VDD = 3.0V (Note 3)
—
—
< ±1
LSb
VREF = VDD = 5.12V,
VSS ≤ VAIN ≤ VREF
—
—
< ±2
LSb
VREF = VDD = 3.0V (Note 3)
—
—
< ±1
LSb
VREF = VDD = 5.12V,
VSS ≤ VAIN ≤ VREF
—
—
< ±2
LSb
VREF = VDD = 3.0V (Note 3)
—
—
< ±1
LSb
VREF = VDD = 5.12V,
VSS ≤ VAIN ≤ VREF
—
—
< ±2
LSb
VREF = VDD = 3.0V (Note 3)
—
guaranteed
—
—
3.0V
—
VDD + 0.3
V
VSS - 0.3
—
VREF
V
VSS ≤ VAIN ≤ VREF
A20
VREF Reference voltage
A25
VAIN Analog input voltage
A30
ZAIN Recommended impedance of analog
voltage source
—
—
10.0
kΩ
A40
IAD
—
180
—
µA
Average current consumption when A/D is on. (Note 1)
A50
IREF VREF input current (Note 2)
10
—
1000
µA
—
—
40
µA
During VAIN acquisition.
Based on differential of
VHOLD to VAIN.
To charge CHOLD see
Section 7.1.
During A/D Conversion cycle
—
—
1
mA
—
—
10
µA
A/D conversion current (VDD)
PIC16C71
PIC16LC71
During VAIN acquisition.
Based on differential of
VHOLD to VAIN.
To charge CHOLD see
Section 7.1.
During A/D Conversion cycle
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: When A/D is off, it will not consume any current other than minor leakage current. The power-down current spec includes
any such leakage from the A/D module.
2: VREF current is from RA3 pin or VDD pin, whichever is selected as reference input.
3: These specifications apply if VREF = 3.0V and if VDD ≥ 3.0V. VAIN must be between VSS and VREF.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 145
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 15-6: A/D CONVERSION TIMING
BSF ADCON0, GO
1 Tcy
(TOSC/2) (1)
131
Q4
130
132
A/D CLK
7
A/D DATA
6
5
4
3
2
1
0
NEW_DATA
OLD_DATA
ADRES
ADIF
GO
DONE
SAMPLING STOPPED
SAMPLE
Note 1: If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the
SLEEP instruction to be executed.
TABLE 15-7:
A/D CONVERSION REQUIREMENTS
Param
No.
Sym
Characteristic
130
TAD
A/D clock period
Min
Typ†
Max
Units
PIC16C71
2.0
—
—
µs
TOSC based, VREF ≥ 3.0V
PIC16LC71
2.0
—
—
µs
TOSC based, VREF full range
PIC16C71
2.0
4.0
6.0
µs
A/D RC Mode
PIC16LC71
3.0
6.0
9.0
µs
A/D RC Mode
—
9.5
—
TAD
Note 2
20
—
µs
5*
—
—
µs
The minimum time is the amplifier settling time. This may be
used if the "new" input voltage
has not changed by more than
1 LSb (i.e., 19.5 mV @ 5.12V)
from the last sampled voltage
(as stated on CHOLD).
—
Tosc/2§
—
—
If the A/D clock source is
selected as RC, a time of TCY is
added before the A/D clock
starts. This allows the SLEEP
instruction to be executed.
1.5§
—
—
TAD
131
TCNV
Conversion time
(not including S/H time) (Note 1)
132
TACQ
Acquisition time
134
TGO
135
TSWC
Conditions
Q4 to A/D clock start
Switching from convert → sample time
*
†
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
§ These specifications ensured by design.
Note 1: ADRES register may be read on the following TCY cycle.
2: See Section 7.1 for min conditions.
DS30272A-page 146
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
16.0
DC AND AC
CHARACTERISTICS GRAPHS
AND TABLES FOR PIC16C71
FIGURE 16-2: TYPICAL RC OSCILLATOR
FREQUENCY VS. VDD
5.0
R = 4.7k
The graphs and tables provided in this section are for
design guidance and are not tested or guaranteed. In
some graphs or tables the data presented are outside specified operating range (e.g. outside specified VDD range). This is for information only and
devices are guaranteed to operate properly only
within the specified range.
The data presented in this section is a statistical summary of data collected on units
from different lots over a period of time and
matrix samples. 'Typical' represents the
mean of the distribution while 'max' or 'min'
represents (mean + 3σ) and (mean - 3σ)
respectively where σ is standard deviation.
4.5
4.0
3.5
3.0
R = 10k
2.5
Fosc (MHz)
Note:
2.0
1.5
Cext = 20 pF, T = 25°C
FIGURE 16-1: TYPICAL RC OSCILLATOR
FREQUENCY VS.
TEMPERATURE
1.0
R = 100k
0.5
Fosc
Fosc (25°C)
Frequency Normalized to 25°C
0.0
3.0
1.050
1.025
3.5
4.0
4.5
5.0
5.5
6.0
VDD (Volts)
Rext = 10k
Cext = 100 pF
FIGURE 16-3: TYPICAL RC OSCILLATOR
FREQUENCY VS. VDD
1.000
VDD = 5.5V
0.975
710 71 711 715
2.0
0.950
R = 3.3k
1.8
VDD = 3.5V
0.925
0.900
1.6
0.875
1.4
R = 4.7k
0.850
0
10
20
30
40
50
60
70
1.2
T(°C)
Fosc (MHz)
1.0
0.8
R = 10k
0.6
Cext = 100 pF, T = 25°C
0.4
0.2
0.0
3.0
R = 100k
3.5
4.0
4.5
5.0
5.5
6.0
VDD (Volts)
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 147
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 16-4: TYPICAL RC OSCILLATOR
FREQUENCY VS. VDD
TABLE 16-1:
RC OSCILLATOR
FREQUENCIES
.8
Average
R = 3.3k
Cext
Rext
FOSC @ 5V, 25°C
.7
20 pF
4.7k
10k
100k
3.3k
4.7k
10k
100k
3.3k
4.7k
10k
100k
R = 4.7k
.6
Fosc (MHz)
100 pF
.5
300 pF
.4
R = 10k
.3
Cext = 300 pF, T = 25°C
R = 100k
0
3.0
3.5
4.0
±17.35%
±10.10%
±11.90%
±9.43%
±9.83%
±10.92%
±16.03%
±10.97%
±10.14%
±10.43%
±11.24%
The percentage variation indicated here is part to part
variation due to normal process distribution. The variation indicated is ±3 standard deviation from average
value for VDD = 5V.
.1
4.5
5.0
5.5
6.0
FIGURE 16-6: TYPICAL IPD VS. VDD
WATCHDOG TIMER ENABLED
25°C
VDD (Volts)
14
FIGURE 16-5: TYPICAL IPD VS. VDD
WATCHDOG TIMER
DISABLED 25°C
12
0.6
10
IPD (µA)
0.5
0.4
8
6
IPD (µA)
Data based on matrix samples. See first page of this section for details.
.2
4.52 MHz
2.47 MHz
290.86 kHz
1.92 MHz
1.49 MHz
788.77 kHz
88.11 kHz
726.89 kHz
573.95 kHz
307.31 kHz
33.82 kHz
0.3
4
0.2
2
0
0.1
3.0
3.5
4.0
4.5
5.0
5.5
6.0
VDD (Volts)
0.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
VDD (Volts)
DS30272A-page 148
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 16-7: MAXIMUM IPD VS. VDD
WATCHDOG DISABLED
710 71 711 715
FIGURE 16-8: MAXIMUM IPD VS. VDD
WATCHDOG ENABLED
45
25
-55°C
-40°C
40
125°C
35
20
30
125°C
25
20
0°C
70°C
85°C
15
10
85°C
70°C
10
5
5
0
3.0
3.5
4.0
4.5
5.0
VDD (Volts)
5.5
0°C
-40°C
-55°C
6.0
0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
VDD (Volts)
IPD, with Watchdog Timer enabled, has two components:
The leakage current which increases with higher temperature and the operating current of the Watchdog Timer logic
which increases with lower temperature. At -40°C, the latter
dominates explaining the apparently anomalous behavior.
FIGURE 16-9: VTH (INPUT THRESHOLD VOLTAGE) OF I/O PINS VS. VDD
2.00
1.80
Max (-40˚C to 85˚C)
VTH (Volts)
1.60
25˚C, TYP
1.40
1.20
Min (-40˚C to 85˚C)
1.00
0.80
0.60
2.5
1997 Microchip Technology Inc.
3.0
Powered by ICminer.com Electronic-Library Service CopyRight 2003
3.5
4.0
4.5
VDD (Volts)
5.0
5.5
6.0
DS30272A-page 149
Data based on matrix samples. See first page of this section for details.
IPD (µA)
IPD (µA)
15
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 16-10: VIH, VIL OF MCLR, T0CKI AND OSC1 (IN RC MODE) VS. VDD
4.50
VIH, Max (-40°C to 85°C)
VIH, Typ (25°C)
4.00
VIH, Min (-40°C to 85°C)
VIH, VIL (Volts)
3.50
3.00
2.50
2.00
1.50
VIL, Max (-40°C to 85°C)
1.00
VIL, Typ (25°C)
VIL, Min (-40°C to 85°C)
0.50
0.00
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Note: These input pins have a Schmitt Trigger input buffer.
FIGURE 16-11: VTH (INPUT THRESHOLD VOLTAGE) OF OSC1 INPUT (IN XT, HS, AND LP MODES)
VS. VDD
Min (-40°C to 85°C)
3.60
3.40
TYP (25°C)
Max (-40°C to 85°C)
3.20
3.00
2.80
2.60
VTH (Volts)
Data based on matrix samples. See first page of this section for details.
VDD (Volts)
Min (-40°C to 85°C)
2.40
2.20
2.00
1.80
1.60
1.40
1.20
1.00
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
VDD (Volts)
DS30272A-page 150
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 16-12: TYPICAL IDD VS. FREQ (EXT CLOCK, 25°C)
10,000
6.0
5.5
5.0
4.5
4.0
3.5
3.0
100
10
1
10,000
100,000
1,000,000
100,000,000
10,000,000
Frequency (Hz)
FIGURE 16-13: MAXIMUM, IDD VS. FREQ (EXT CLOCK, -40° TO +85°C)
10,000
6.0
5.5
5.0
4.5
4.0
3.5
3.0
IDD (µA)
1,000
100
10
10,000
100,000
1,000,000
10,000,000
100,000,000
Frequency (Hz)
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 151
Data based on matrix samples. See first page of this section for details.
IDD (µA)
1,000
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 16-14: MAXIMUM IDD VS. FREQ WITH A/D OFF (EXT CLOCK, -55° TO +125°C)
10,000
6.0
5.5
5.0
4.5
4.0
3.5
3.0
IDD (µA)
1,000
10
10,000
100,000
1,000,000
100,000,000
10,000,000
Frequency (Hz)
FIGURE 16-15: WDT TIMER TIME-OUT
PERIOD VS. VDD
FIGURE 16-16: TRANSCONDUCTANCE (gm)
OF HS OSCILLATOR VS. VDD
9000
50
8000
45
7000
40
Max, -40°C
35
gm (µA/V)
6000
WDT Period (ms)
Data based on matrix samples. See first page of this section for details.
100
Max, 85°C
Max, 70°C
30
25
5000
4000
Typ, 25°C
3000
20
Min, 85°C
2000
Typ, 25°C
Min, 0°C
1000
15
0
10
2
Min, -40°C
3
4
5
6
7
VDD (Volts)
5
2
3
4
5
6
7
VDD (Volts)
DS30272A-page 152
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
Applicable Devices
FIGURE 16-17: TRANSCONDUCTANCE (gm)
OF LP OSCILLATOR VS. VDD
710 71 711 715
FIGURE 16-19: IOH VS. VOH, VDD = 3V
0
225
200
-5
Max, -40°C
Min, 85°C
175
-10
Typ, 25°C
IOH (mA)
gm (µA/V)
150
125
100
Min, 85°C
Typ, 25°C
-15
Max, -40°C
50
-20
25
0
3.0
3.5
4.0
4.5
VDD (Volts)
5.0
5.5
6.0
FIGURE 16-18: TRANSCONDUCTANCE (gm)
OF XT OSCILLATOR VS. VDD
-25
0.0
0.5
1.0
1.5
2.0
VOH (Volts)
2.5
3.0
FIGURE 16-20: IOH VS. VOH, VDD = 5V
0
2500
-5
Max, -40°C
-10
2000
IOH (mA)
-15
gm (µA/V)
Typ, 25°C
1500
-20
Min @ 85°C
-25
Typ @ 25°C
-30
1000
-35
-40
Max @ -40°C
Min, 85°C
500
-45
-50
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0
2
3
4
5
VDD (Volts)
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
6
7
VOH (Volts)
DS30272A-page 153
Data based on matrix samples. See first page of this section for details.
75
PIC16C71X
Applicable Devices
710 71 711 715
FIGURE 16-22: IOL VS. VOL, VDD = 5V
FIGURE 16-21: IOL VS. VOL, VDD = 3V
35
90
Max @ -40°C
30
80
Max @ -40°C
70
25
60
Typ @ 25°C
Typ @ 25°C
15
Min @ +85°C
IOL (mA)
IOL (mA)
20
50
Min @ +85°C
40
30
10
20
Data based on matrix samples. See first page of this section for details.
5
10
0
0.0
0.5
1.0
1.5
2.0
2.5
VOL (Volts)
3.0
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
VOL (Volts)
DS30272A-page 154
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
17.0
PACKAGING INFORMATION
17.1
18-Lead Ceramic CERDIP Dual In-line with Window (300 mil) (JW)
N
α
C
E1 E
eA
eB
Pin No. 1
Indicator
Area
D
S
S1
Base
Plane
Seating
Plane
L
B1
A1 A3 A
e1
B
A2
D1
Package Group: Ceramic CERDIP Dual In-Line (CDP)
Millimeters
Symbol
Min
Max
Inches
Notes
Min
Max
α
0°
10°
0°
10°
A
A1
A2
A3
B
B1
C
D
D1
E
E1
e1
eA
eB
L
N
S
S1
—
0.381
3.810
3.810
0.355
1.270
0.203
22.352
20.320
7.620
5.588
2.540
7.366
7.620
3.175
18
0.508
0.381
5.080
1.7780
4.699
4.445
0.585
1.651
0.381
23.622
20.320
8.382
7.874
2.540
8.128
10.160
3.810
18
1.397
1.270
—
0.015
0.150
0.150
0.014
0.050
0.008
0.880
0.800
0.300
0.220
0.100
0.290
0.300
0.125
18
0.020
0.015
0.200
0.070
0.185
0.175
0.023
0.065
0.015
0.930
0.800
0.330
0.310
0.100
0.320
0.400
0.150
18
0.055
0.050
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Typical
Typical
Reference
Reference
Typical
Notes
Typical
Typical
Reference
Reference
Typical
DS30272A-page 155
PIC16C71X
17.2
18-Lead Plastic Dual In-line (300 mil) (P)
N
α
C
E1 E
eA
eB
Pin No. 1
Indicator
Area
D
S
S1
Base
Plane
Seating
Plane
L
B1
A1 A2 A
e1
B
D1
Package Group: Plastic Dual In-Line (PLA)
Millimeters
Symbol
Min
Max
α
0°
A
A1
A2
B
B1
C
D
D1
E
E1
e1
eA
eB
L
N
S
S1
–
0.381
3.048
0.355
1.524
0.203
22.479
20.320
7.620
6.096
2.489
7.620
7.874
3.048
18
0.889
0.127
Inches
Min
Max
10°
0°
10°
4.064
–
3.810
0.559
1.524
0.381
23.495
20.320
8.255
7.112
2.591
7.620
9.906
3.556
18
–
–
–
0.015
0.120
0.014
0.060
0.008
0.885
0.800
0.300
0.240
0.098
0.300
0.310
0.120
18
0.035
0.005
0.160
–
0.150
0.022
0.060
0.015
0.925
0.800
0.325
0.280
0.102
0.300
0.390
0.140
18
–
–
DS30272A-page 156
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Notes
Reference
Typical
Reference
Typical
Reference
Notes
Reference
Typical
Reference
Typical
Reference
1997 Microchip Technology Inc.
PIC16C71X
17.3
18-Lead Plastic Surface Mount (SOIC - Wide, 300 mil Body)(SO)
e
B
h x 45°
N
Index
Area
E
H
α
C
Chamfer
h x 45°
L
1
2
3
D
Seating
Plane
Base
Plane
CP
A1
A
Package Group: Plastic SOIC (SO)
Millimeters
Symbol
Min
Max
Inches
Notes
Min
Max
α
0°
8°
0°
8°
A
A1
B
C
D
E
e
H
h
L
N
CP
2.362
0.101
0.355
0.241
11.353
7.416
1.270
10.007
0.381
0.406
18
–
2.642
0.300
0.483
0.318
11.735
7.595
1.270
10.643
0.762
1.143
18
0.102
0.093
0.004
0.014
0.009
0.447
0.292
0.050
0.394
0.015
0.016
18
–
0.104
0.012
0.019
0.013
0.462
0.299
0.050
0.419
0.030
0.045
18
0.004
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Reference
Notes
Reference
DS30272A-page 157
PIC16C71X
17.4
20-Lead Plastic Surface Mount (SSOP - 209 mil Body 5.30 mm) (SS)
N
Index
area
E
H
α
C
L
1 2 3
B
e
A
Base plane
CP
Seating plane
D
A1
Package Group: Plastic SSOP
Millimeters
Symbol
Min
Max
α
0°
A
A1
B
C
D
E
e
H
L
N
CP
1.730
0.050
0.250
0.130
7.070
5.200
0.650
7.650
0.550
20
-
Inches
Notes
Min
Max
8°
0°
8°
1.990
0.210
0.380
0.220
7.330
5.380
0.650
7.900
0.950
20
0.102
0.068
0.002
0.010
0.005
0.278
0.205
0.026
0.301
0.022
20
-
0.078
0.008
0.015
0.009
0.289
0.212
0.026
0.311
0.037
20
0.004
Reference
Notes
Reference
Note 1: Dimensions D1 and E1 do not include mold protrusion. Allowable mold protrusion is 0.25m/m (0.010”) per
side. D1 and E1 dimensions including mold mismatch.
2: Dimension “b” does not include Dambar protrusion, allowable Dambar protrusion shall be 0.08m/m
(0.003”)max.
3: This outline conforms to JEDEC MS-026.
DS30272A-page 158
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
17.5
Package Marking Information
18-Lead PDIP
Example
MMMMMMMMMMMMM
XXXXXXXXXXXXXXXX
AABBCDE
18-Lead SOIC
PIC16C711-04/P
9452CBA
Example
MMMMMMMMMM
XXXXXXXXXXXX
XXXXXXXXXXXX
AABBCDE
PIC16C715
-20/50
9447CBA
18-Lead CERDIP Windowed
Example
MMMMMM
XXXXXXXX
AABBCDE
20-Lead SSOP
Example
XXXXXXXX
XXXXXXXX
PIC16C710
20I/SS025
AABBCAE
Legend:
9517SBP
MM...M
XX...X
AA
BB
C
D1
E
Note:
PIC16C71
/JW
945/CBT
Microchip part number information
Customer specific information*
Year code (last 2 digits of calender year)
Week code (week of January 1 is week '01’)
Facility code of the plant at which wafer is manufactured.
C = Chandler, Arizona, U.S.A.
S = Tempe, Arizona, U.S.A.
Mask revision number for microcontroller
Assembly code of the plant or country of origin in which
part was assembled.
In the event the full Microchip part number cannot be marked on one
line, it will be carried over to the next line thus limiting the number of
available characters for customer specific information.
* Standard OTP marking consists of Microchip part number, year code, week code,
facility code, mask revision number, and assembly code. For OTP marking beyond
this, certain price adders apply. Please check with your Microchip Sales Office.
For QTP devices, any special marking adders are included in QTP price.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 159
PIC16C71X
NOTES:
DS30272A-page 160
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
APPENDIX A:
APPENDIX B: COMPATIBILITY
The following are the list of modifications over the
PIC16C5X microcontroller family:
To convert code written for PIC16C5X to PIC16CXX,
the user should take the following steps:
1.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Instruction word length is increased to 14-bits.
This allows larger page sizes both in program
memory (1K now as opposed to 512 before) and
register file (68 bytes now versus 32 bytes
before).
A PC high latch register (PCLATH) is added to
handle program memory paging. Bits PA2, PA1,
PA0 are removed from STATUS register.
Data memory paging is redefined slightly.
STATUS register is modified.
Four new instructions have been added:
RETURN, RETFIE, ADDLW, and SUBLW.
Two instructions TRIS and OPTION are being
phased out although they are kept for compatibility with PIC16C5X.
OPTION and TRIS registers are made addressable.
Interrupt capability is added. Interrupt vector is
at 0004h.
Stack size is increased to 8 deep.
Reset vector is changed to 0000h.
Reset of all registers is revisited. Five different
reset (and wake-up) types are recognized. Registers are reset differently.
Wake up from SLEEP through interrupt is
added.
Two separate timers, Oscillator Start-up Timer
(OST) and Power-up Timer (PWRT) are
included for more reliable power-up. These timers are invoked selectively to avoid unnecessary delays on power-up and wake-up.
PORTB has weak pull-ups and interrupt on
change feature.
T0CKI pin is also a port pin (RA4) now.
FSR is made a full eight bit register.
“In-circuit serial programming” is made possible.
The user can program PIC16CXX devices using
only five pins: VDD, VSS, MCLR/VPP, RB6 (clock)
and RB7 (data in/out).
PCON status register is added with a Power-on
Reset status bit (POR).
Code protection scheme is enhanced such that
portions of the program memory can be protected, while the remainder is unprotected.
Brown-out protection circuitry has been added.
Controlled by configuration word bit BODEN.
Brown-out reset ensures the device is placed in
a reset condition if VDD dips below a fixed setpoint.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
2.
3.
4.
5.
Remove any program memory page select
operations (PA2, PA1, PA0 bits) for CALL, GOTO.
Revisit any computed jump operations (write to
PC or add to PC, etc.) to make sure page bits
are set properly under the new scheme.
Eliminate any data memory page switching.
Redefine data variables to reallocate them.
Verify all writes to STATUS, OPTION, and FSR
registers since these have changed.
Change reset vector to 0000h.
DS30272A-page 161
PIC16C71X
APPENDIX C: WHAT’S NEW
APPENDIX D: WHAT’S CHANGED
1.
1.
Consolidated all pin compatible 18-pin A/D
based devices into one data sheet.
2.
3.
DS30272A-page 162
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Minor changes, spelling and grammatical
changes.
Low voltage operation on the PIC16LC710/711/
715 has been reduced from 3.0V to 2.5V.
Part numbers of the PIC16C70 and PIC16C71A
have changed to PIC16C710 and PIC16C711,
respectively.
1997 Microchip Technology Inc.
PIC16C71X
INDEX
A
A/D
Accuracy/Error ........................................................... 44
ADIF bit ...................................................................... 39
Analog Input Model Block Diagram ............................ 40
Analog-to-Digital Converter ........................................ 37
Configuring Analog Port Pins ..................................... 41
Configuring the Interrupt ............................................ 39
Configuring the Module .............................................. 39
Connection Considerations ........................................ 44
Conversion Clock ....................................................... 41
Conversion Time ........................................................ 43
Conversions ............................................................... 42
Converter Characteristics .......................... 99, 122, 145
Delays ........................................................................ 40
Effects of a Reset ....................................................... 44
Equations ................................................................... 40
Faster Conversion - Lower Resolution Trade-off ....... 43
Flowchart of A/D Operation ........................................ 45
GO/DONE bit ............................................................. 39
Internal Sampling Switch (Rss) Impedence ............... 40
Minimum Charging Time ............................................ 40
Operation During Sleep ............................................. 44
Sampling Requirements ............................................. 40
Source Impedence ..................................................... 40
Time Delays ............................................................... 40
Transfer Function ....................................................... 45
Absolute Maximum Ratings ............................... 89, 111, 135
AC Characteristics
PIC16C710 .............................................................. 101
PIC16C711 .............................................................. 101
PIC16C715 .............................................................. 125
ADCON0 Register .............................................................. 37
ADCON1 ............................................................................ 37
ADCON1 Register ........................................................ 14, 37
ADCS0 bit .......................................................................... 37
ADCS1 bit .......................................................................... 37
ADIE bit ........................................................................ 19, 20
ADIF bit ........................................................................ 21, 37
ADON bit ............................................................................ 37
ADRES Register .................................................... 15, 37, 39
ALU ...................................................................................... 7
Application Notes
AN546 ........................................................................ 37
AN552 ........................................................................ 27
AN556 ........................................................................ 23
AN607, Power-up Trouble Shooting .......................... 53
Architecture
Harvard ........................................................................ 7
Overview ...................................................................... 7
von Neumann ............................................................... 7
Assembler
MPASM Assembler .................................................... 86
B
Block Diagrams
Analog Input Model .................................................... 40
On-Chip Reset Circuit ................................................ 52
PIC16C71X .................................................................. 8
RA3/RA0 Port Pins .................................................... 25
RA4/T0CKI Pin ........................................................... 25
RB3:RB0 Port Pins .................................................... 27
RB7:RB4 Pins ............................................................ 28
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
RB7:RB4 Port Pins .....................................................28
Timer0 ........................................................................31
Timer0/WDT Prescaler ...............................................34
Watchdog Timer .........................................................65
BODEN bit ..........................................................................48
BOR bit ........................................................................ 22, 54
Brown-out Reset (BOR) ......................................................53
C
C bit ....................................................................................17
C16C71 ..............................................................................47
Carry bit ................................................................................7
CHS0 bit .............................................................................37
CHS1 bit .............................................................................37
Clocking Scheme ................................................................10
Code Examples
Call of a Subroutine in Page 1 from Page 0 ...............24
Changing Prescaler (Timer0 to WDT) ........................35
Changing Prescaler (WDT to Timer0) ........................35
Doing an A/D Conversion ...........................................42
I/O Programming ........................................................30
Indirect Addressing .....................................................24
Initializing PORTA ......................................................25
Initializing PORTB ......................................................27
Saving STATUS and W Registers in RAM .................64
Code Protection ........................................................... 47, 67
Computed GOTO ...............................................................23
Configuration Bits ...............................................................47
CP0 bit ......................................................................... 47, 48
CP1 bit ................................................................................48
D
DC bit ..................................................................................17
DC Characteristics ........................................................... 147
PIC16C71 ................................................................ 136
PIC16C710 ........................................................ 90, 101
PIC16C711 ........................................................ 90, 101
PIC16C715 ...................................................... 113, 125
Development Support .................................................... 3, 85
Development Tools .............................................................85
Diagrams - See Block Diagrams
Digit Carry bit ........................................................................7
Direct Addressing ...............................................................24
E
Electrical Characteristics
PIC16C71 ................................................................ 135
PIC16C710 .................................................................89
PIC16C711 .................................................................89
PIC16C715 .............................................................. 111
External Brown-out Protection Circuit .................................60
External Power-on Reset Circuit ........................................60
F
Family of Devices
PIC16C71X ...................................................................4
FOSC0 bit .................................................................... 47, 48
FOSC1 bit .................................................................... 47, 48
FSR Register ......................................................... 15, 16, 24
Fuzzy Logic Dev. System (fuzzyTECH-MP) .....................87
G
General Description ..............................................................3
GIE bit .......................................................................... 19, 61
GO/DONE bit ......................................................................37
DS30390D-page 163
PIC16C71X
I
I/O Ports
PORTA ....................................................................... 25
PORTB ....................................................................... 27
Section ....................................................................... 25
I/O Programming Considerations ....................................... 30
ICEPIC Low-Cost PIC16CXXX In-Circuit Emulator ........... 85
In-Circuit Serial Programming ...................................... 47, 67
INDF Register ........................................................ 14, 16, 24
Indirect Addressing ............................................................ 24
Instruction Cycle ................................................................. 10
Instruction Flow/Pipelining ................................................. 10
Instruction Format .............................................................. 69
Instruction Set
ADDLW ...................................................................... 71
ADDWF ...................................................................... 71
ANDLW ...................................................................... 71
ANDWF ...................................................................... 71
BCF ............................................................................ 72
BSF ............................................................................ 72
BTFSC ....................................................................... 72
BTFSS ....................................................................... 73
CALL .......................................................................... 73
CLRF .......................................................................... 74
CLRW ........................................................................ 74
CLRWDT .................................................................... 74
COMF ........................................................................ 75
DECF ......................................................................... 75
DECFSZ ..................................................................... 75
GOTO ........................................................................ 76
INCF ........................................................................... 76
INCFSZ ...................................................................... 77
IORLW ....................................................................... 77
IORWF ....................................................................... 78
MOVF ......................................................................... 78
MOVLW ..................................................................... 78
MOVWF ..................................................................... 78
NOP ........................................................................... 79
OPTION ..................................................................... 79
RETFIE ...................................................................... 79
RETLW ...................................................................... 80
RETURN .................................................................... 80
RLF ............................................................................ 81
RRF ............................................................................ 81
SLEEP ....................................................................... 82
SUBLW ...................................................................... 82
SUBWF ...................................................................... 83
SWAPF ...................................................................... 83
TRIS ........................................................................... 83
XORLW ...................................................................... 84
XORWF ...................................................................... 84
Section ....................................................................... 69
Summary Table .......................................................... 70
INT Interrupt ....................................................................... 63
INTCON Register ............................................................... 19
INTE bit .............................................................................. 19
INTEDG bit ................................................................... 18, 63
Internal Sampling Switch (Rss) Impedence ....................... 40
Interrupts ............................................................................ 47
A/D ............................................................................. 61
External ...................................................................... 61
PORTB Change ......................................................... 61
PortB Change ............................................................ 63
RB7:RB4 Port Change ............................................... 27
Section ....................................................................... 61
TMR0 ......................................................................... 63
DS30390D-page 164
Powered by ICminer.com Electronic-Library Service CopyRight 2003
TMR0 Overflow .......................................................... 61
INTF bit .............................................................................. 19
IRP bit ................................................................................ 17
K
KeeLoq Evaluation and Programming Tools ................... 87
L
Loading of PC .................................................................... 23
LP ...................................................................................... 54
M
MCLR ........................................................................... 52, 56
Memory
Data Memory ............................................................. 12
Program Memory ....................................................... 11
Register File Maps
PIC16C71 .......................................................... 12
PIC16C710 ........................................................ 12
PIC16C711 ........................................................ 13
PIC16C715 ........................................................ 13
MP-DriveWay - Application Code Generator .................. 87
MPEEN bit ................................................................... 22, 48
MPLAB C ........................................................................ 87
MPLAB Integrated Development Environment
Software ............................................................................. 86
O
OPCODE ........................................................................... 69
OPTION Register ............................................................... 18
Orthogonal ........................................................................... 7
OSC selection .................................................................... 47
Oscillator
HS ........................................................................ 49, 54
LP ........................................................................ 49, 54
RC ............................................................................. 49
XT ........................................................................ 49, 54
Oscillator Configurations .................................................... 49
Oscillator Start-up Timer (OST) ......................................... 53
P
Packaging
18-Lead CERDIP w/Window ................................... 155
18-Lead PDIP .......................................................... 156
18-Lead SOIC .......................................................... 157
20-Lead SSOP ........................................................ 158
Paging, Program Memory .................................................. 23
PCL Register ................................................... 14, 15, 16, 23
PCLATH ....................................................................... 57, 58
PCLATH Register ............................................ 14, 15, 16, 23
PCON Register ............................................................ 22, 54
PD bit ..................................................................... 17, 52, 55
PER bit ............................................................................... 22
PIC16C71 ........................................................................ 147
AC Characteristics ................................................... 147
PICDEM-1 Low-Cost PIC16/17 Demo Board .................... 86
PICDEM-2 Low-Cost PIC16CXX Demo Board .................. 86
PICDEM-3 Low-Cost PIC16CXXX Demo Board ............... 86
PICMASTER In-Circuit Emulator ..................................... 85
PICSTART Plus Entry Level Development System ......... 85
PIE1 Register ..................................................................... 20
Pin Functions
MCLR/VPP ................................................................... 9
OSC1/CLKIN ............................................................... 9
OSC2/CLKOUT ........................................................... 9
RA0/AN0 ...................................................................... 9
RA1/AN1 ...................................................................... 9
1997 Microchip Technology Inc.
PIC16C71X
RA2/AN2 ...................................................................... 9
RA3/AN3/VREF ............................................................. 9
RA4/T0CKI ................................................................... 9
RB0/INT ....................................................................... 9
RB1 .............................................................................. 9
RB2 .............................................................................. 9
RB3 .............................................................................. 9
RB4 .............................................................................. 9
RB5 .............................................................................. 9
RB6 .............................................................................. 9
RB7 .............................................................................. 9
VDD .............................................................................. 9
VSS ............................................................................... 9
Pinout Descriptions
PIC16C71 .................................................................... 9
PIC16C710 .................................................................. 9
PIC16C711 .................................................................. 9
PIC16C715 .................................................................. 9
PIR1 Register ..................................................................... 21
POP ................................................................................... 23
POR ............................................................................. 53, 54
Oscillator Start-up Timer (OST) ........................... 47, 53
Power Control Register (PCON) ................................ 54
Power-on Reset (POR) ............................ 47, 53, 57, 58
Power-up Timer (PWRT) ..................................... 47, 53
Time-out Sequence .................................................... 54
Time-out Sequence on Power-up .............................. 59
TO ........................................................................ 52, 55
POR bit ........................................................................ 22, 54
Port RB Interrupt ................................................................ 63
PORTA ......................................................................... 57, 58
PORTA Register .................................................... 14, 15, 25
PORTB ......................................................................... 57, 58
PORTB Register .................................................... 14, 15, 27
Power-down Mode (SLEEP) .............................................. 66
Prescaler, Switching Between Timer0 and WDT ............... 35
PRO MATE II Universal Programmer .............................. 85
Program Branches ............................................................... 7
Program Memory
Paging ........................................................................ 23
Program Memory Maps
PIC16C71 .................................................................. 11
PIC16C710 ................................................................ 11
PIC16C711 ................................................................ 11
PIC16C715 ................................................................ 11
Program Verification .......................................................... 67
PS0 bit ............................................................................... 18
PS1 bit ............................................................................... 18
PS2 bit ............................................................................... 18
PSA bit ............................................................................... 18
PUSH ................................................................................. 23
PWRT
Power-up Timer (PWRT) ........................................... 53
PWRTE bit ................................................................... 47, 48
R
RBIE bit .............................................................................. 19
RBIF bit .................................................................. 19, 27, 63
RBPU bit ............................................................................ 18
RC ...................................................................................... 54
RC Oscillator ................................................................ 51, 54
Read-Modify-Write ............................................................. 30
Register File ....................................................................... 12
Registers
Maps
PIC16C71 .......................................................... 12
PIC16C710 ........................................................ 12
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
PIC16C711 .........................................................13
PIC16C715 .........................................................13
Reset Conditions ........................................................56
Summary ............................................................. 14–??
Reset ........................................................................... 47, 52
Reset Conditions for Special Registers ..............................56
RP0 bit ......................................................................... 12, 17
RP1 bit ................................................................................17
S
SEEVAL Evaluation and Programming System ...............87
Services
One-Time-Programmable (OTP) Devices ....................5
Quick-Turnaround-Production (QTP) Devices ..............5
Serialized Quick-Turnaround Production (SQTP)
Devices .........................................................................5
SLEEP ......................................................................... 47, 52
Software Simulator (MPLAB SIM) ...................................87
Special Features of the CPU ..............................................47
Special Function Registers
PIC16C71 ...................................................................14
PIC16C710 .................................................................14
PIC16C711 .................................................................14
Special Function Registers, Section ...................................14
Stack ...................................................................................23
Overflows ....................................................................23
Underflow ...................................................................23
STATUS Register ...............................................................17
T
T0CS bit ..............................................................................18
T0IE bit ...............................................................................19
T0IF bit ...............................................................................19
TAD .....................................................................................41
Timer0
RTCC ................................................................... 57, 58
Timers
Timer0
Block Diagram ....................................................31
External Clock ....................................................33
External Clock Timing ........................................33
Increment Delay .................................................33
Interrupt ..............................................................31
Interrupt Timing ..................................................32
Prescaler ............................................................34
Prescaler Block Diagram ....................................34
Section ...............................................................31
Switching Prescaler Assignment ........................35
Synchronization ..................................................33
T0CKI .................................................................33
T0IF ....................................................................63
Timing .................................................................31
TMR0 Interrupt ...................................................63
Timing Diagrams
A/D Conversion ....................................... 100, 124, 146
Brown-out Reset .................................................. 53, 97
CLKOUT and I/O ....................................... 96, 119, 142
External Clock Timing ................................ 95, 118, 141
Power-up Timer ................................................. 97, 143
Reset ................................................................. 97, 143
Start-up Timer .................................................... 97, 143
Time-out Sequence ....................................................59
Timer0 ................................................. 31, 98, 121, 144
Timer0 Interrupt Timing ..............................................32
Timer0 with External Clock .........................................33
Wake-up from SLEEP through Interrupt .....................67
Watchdog Timer ................................................ 97, 143
DS30390D-page 165
PIC16C71X
TO bit ................................................................................. 17
TOSE bit ............................................................................. 18
TRISA Register ...................................................... 14, 16, 25
TRISB Register ...................................................... 14, 16, 27
Two’s Complement .............................................................. 7
LIST OF EXAMPLES
U
Example 4-2:
Example 5-1:
Example 5-2:
Example 5-3:
Upward Compatibility ........................................................... 3
UV Erasable Devices ........................................................... 5
W
W Register
ALU .............................................................................. 7
Wake-up from SLEEP ........................................................ 66
Watchdog Timer (WDT) ................................... 47, 52, 56, 65
WDT ................................................................................... 56
Block Diagram ............................................................ 65
Programming Considerations .................................... 65
Timeout ................................................................ 57, 58
WDT Period ........................................................................ 65
WDTE bit ...................................................................... 47, 48
Z
Z bit .................................................................................... 17
Zero bit ................................................................................. 7
Example 3-1:
Example 4-1:
Example 6-1:
Example 6-2:
Equation 7-1:
Example 7-1:
Example 7-2:
Example 7-3:
Example 8-1:
LIST OF FIGURES
Figure 3-1:
Figure 3-2:
Figure 4-1:
Figure 4-2:
Figure 4-3:
Figure 4-4:
Figure 4-5:
Figure 4-6:
Figure 4-7:
Figure 4-8:
Figure 4-9:
Figure 4-10:
Figure 4-11:
Figure 4-12:
Figure 4-13:
Figure 4-14:
Figure 4-15:
Figure 5-1:
Figure 5-2:
Figure 5-3:
Figure 5-4:
Figure 5-5:
Figure 5-6:
Figure 6-1:
Figure 6-2:
Figure 6-3:
Figure 6-4:
Figure 6-5:
Figure 6-6:
Figure 7-1:
Figure 7-2:
DS30390D-page 166
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Instruction Pipeline Flow ........................... 10
Call of a Subroutine in Page 1 from
Page 0 ...................................................... 24
Indirect Addressing ................................... 24
Initializing PORTA..................................... 25
Initializing PORTB..................................... 27
Read-Modify-Write Instructions
on an I/O Port ........................................... 30
Changing Prescaler (Timer0→WDT) ........ 35
Changing Prescaler (WDT→Timer0) ........ 35
A/D Minimum Charging Time.................... 40
Calculating the Minimum Required
Aquisition Time ......................................... 40
A/D Conversion......................................... 42
4-bit vs. 8-bit Conversion Times ............... 43
Saving STATUS and W Registers
in RAM ...................................................... 64
PIC16C71X Block Diagram ........................ 8
Clock/Instruction Cycle ............................. 10
PIC16C710 Program Memory Map
and Stack .................................................. 11
PIC16C71/711 Program Memory Map
and Stack .................................................. 11
PIC16C715 Program Memory Map
and Stack .................................................. 11
PIC16C710/71 Register File Map ............. 12
PIC16C711 Register File Map .................. 13
PIC16C715 Register File Map .................. 13
Status Register (Address 03h, 83h).......... 17
OPTION Register (Address 81h, 181h) .... 18
INTCON Register (Address 0Bh, 8Bh) ..... 19
PIE1 Register (Address 8Ch) ................... 20
PIR1 Register (Address 0Ch) ................... 21
PCON Register (Address 8Eh),
PIC16C710/711 ........................................ 22
PCON Register (Address 8Eh),
PIC16C715 ............................................... 22
Loading of PC In Different Situations........ 23
Direct/Indirect Addressing......................... 24
Block Diagram of RA3:RA0 Pins .............. 25
Block Diagram of RA4/T0CKI Pin ............. 25
Block Diagram of RB3:RB0 Pins .............. 27
Block Diagram of RB7:RB4 Pins
(PIC16C71) ............................................... 28
Block Diagram of RB7:RB4 Pins
(PIC16C710/711/715) ............................... 28
Successive I/O Operation ......................... 30
Timer0 Block Diagram .............................. 31
Timer0 Timing: Internal Clock/
No Prescale .............................................. 31
Timer0 Timing: Internal Clock/
Prescale 1:2 .............................................. 32
Timer0 Interrupt Timing ............................ 32
Timer0 Timing with External Clock ........... 33
Block Diagram of the Timer0/
WDT Prescaler ......................................... 34
ADCON0 Register (Address 08h),
PIC16C710/71/711 ................................... 37
ADCON0 Register (Address 1Fh),
PIC16C715 ............................................... 38
1997 Microchip Technology Inc.
PIC16C71X
Figure 7-3:
Figure 7-4:
Figure 7-5:
Figure 7-6:
Figure 7-7:
Figure 8-1:
Figure 8-2:
Figure 8-3:
Figure 8-4:
Figure 8-5:
Figure 8-6:
Figure 8-7:
Figure 8-8:
Figure 8-9:
Figure 8-10:
Figure 8-11:
Figure 8-12:
Figure 8-13:
Figure 8-14:
Figure 8-15:
Figure 8-16:
Figure 8-17:
Figure 8-18:
Figure 8-19:
Figure 8-20:
Figure 8-21:
Figure 8-22:
Figure 8-23:
Figure 9-1:
Figure 11-1:
Figure 11-2:
Figure 11-3:
Figure 11-4:
Figure 11-5:
Figure 11-6:
Figure 11-7:
Figure 12-1:
Figure 12-2:
Figure 12-3:
Figure 12-4:
Figure 12-5:
Figure 12-6:
Figure 12-7:
Figure 12-8:
ADCON1 Register, PIC16C710/71/711
(Address 88h),
PIC16C715 (Address 9Fh)........................ 38
A/D Block Diagram.................................... 39
Analog Input Model ................................... 40
A/D Transfer Function ............................... 45
Flowchart of A/D Operation....................... 45
Configuration Word for PIC16C71 ............ 47
Configuration Word, PIC16C710/711........ 48
Configuration Word, PIC16C715............... 48
Crystal/Ceramic Resonator Operation
(HS, XT or LP OSC Configuration) ........... 49
External Clock Input Operation
(HS, XT or LP OSC Configuration) ........... 49
External Parallel Resonant Crystal
Oscillator Circuit ........................................ 51
External Series Resonant Crystal
Oscillator Circuit ........................................ 51
RC Oscillator Mode ................................... 51
Simplified Block Diagram of On-chip
Reset Circuit.............................................. 52
Brown-out Situations ................................. 53
Time-out Sequence on Power-up
(MCLR not Tied to VDD): Case 1............... 59
Time-out Sequence on Power-up
(MCLR Not Tied To VDD): Case 2............. 59
Time-out Sequence on Power-up
(MCLR Tied to VDD) .................................. 59
External Power-on Reset Circuit
(for Slow VDD Power-up)........................... 60
External Brown-out Protection Circuit 1 .... 60
External Brown-out Protection Circuit 2 .... 60
Interrupt Logic, PIC16C710, 71, 711......... 62
Interrupt Logic, PIC16C715....................... 62
INT Pin Interrupt Timing ............................ 63
Watchdog Timer Block Diagram ............... 65
Summary of Watchdog Timer Registers ... 65
Wake-up from Sleep Through Interrupt..... 67
Typical In-Circuit Serial Programming
Connection ................................................ 67
General Format for Instructions ................ 69
Load Conditions ........................................ 94
External Clock Timing ............................... 95
CLKOUT and I/O Timing ........................... 96
Reset, Watchdog Timer, Oscillator
Start-up Timer and Power-up Timer
Timing ....................................................... 97
Brown-out Reset Timing............................ 97
Timer0 External Clock Timings ................. 98
A/D Conversion Timing ........................... 100
Typical IPD vs. VDD
(WDT Disabled, RC Mode) ..................... 101
Maximum IPD vs. VDD
(WDT Disabled, RC Mode) ..................... 101
Typical IPD vs. VDD @ 25°C
(WDT Enabled, RC Mode) ...................... 102
Maximum IPD vs. VDD
(WDT Enabled, RC Mode) ...................... 102
Typical RC Oscillator Frequency
vs. VDD .................................................... 102
Typical RC Oscillator Frequency
vs. VDD .................................................... 102
Typical RC Oscillator Frequency
vs. VDD .................................................... 102
Typical IPD vs. VDD Brown-out Detect
Enabled (RC Mode) ................................ 103
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Figure 12-9:
Figure 12-10:
Figure 12-11:
Figure 12-12:
Figure 12-13:
Figure 12-14:
Figure 12-15:
Figure 12-16:
Figure 12-17:
Figure 12-18:
Figure 12-19:
Figure 12-20:
Figure 12-21:
Figure 12-22:
Figure 12-23:
Figure 12-24:
Figure 12-25:
Figure 12-26:
Figure 12-27:
Figure 12-28:
Figure 12-29:
Figure 12-30:
Figure 13-1:
Figure 13-2:
Figure 13-3:
Figure 13-4:
Figure 13-5:
Figure 13-6:
Figure 13-7:
Figure 14-1:
Figure 14-2:
Figure 14-3:
Figure 14-4:
Figure 14-5:
Maximum IPD vs. VDD Brown-out Detect
Enabled (85°C to -40°C, RC Mode)........ 103
Typical IPD vs. Timer1 Enabled
(32 kHz, RC0/RC1 = 33 pF/33 pF,
RC Mode) ............................................... 103
Maximum IPD vs. Timer1 Enabled
(32 kHz, RC0/RC1 = 33 pF/33 pF,
85°C to -40°C, RC Mode) ....................... 103
Typical IDD vs. Frequency
(RC Mode @ 22 pF, 25°C) ..................... 104
Maximum IDD vs. Frequency
(RC Mode @ 22 pF, -40°C to 85°C) ....... 104
Typical IDD vs. Frequency
(RC Mode @ 100 pF, 25°C) ................... 105
Maximum IDD vs. Frequency
(RC Mode @ 100 pF, -40°C to 85°C) ..... 105
Typical IDD vs. Frequency
(RC Mode @ 300 pF, 25°C) ................... 106
Maximum IDD vs. Frequency
(RC Mode @ 300 pF, -40°C to 85°C) ..... 106
Typical IDD vs. Capacitance
@ 500 kHz (RC Mode) ........................... 107
Transconductance(gm) of
HS Oscillator vs. VDD .............................. 107
Transconductance(gm) of
LP Oscillator vs. VDD .............................. 107
Transconductance(gm) of
XT Oscillator vs. VDD .............................. 107
Typical XTAL Startup Time vs.
VDD (LP Mode, 25°C) ............................. 108
Typical XTAL Startup Time vs.
VDD (HS Mode, 25°C)............................. 108
Typical XTAL Startup Time vs.
VDD (XT Mode, 25°C) ............................. 108
Typical IDD vs. Frequency
(LP Mode, 25°C) ..................................... 109
Maximum IDD vs. Frequency
(LP Mode, 85°C to -40°C)....................... 109
Typical IDD vs. Frequency
(XT Mode, 25°C)..................................... 109
Maximum IDD vs. Frequency
(XT Mode, -40°C to 85°C) ...................... 109
Typical IDD vs. Frequency
(HS Mode, 25°C) .................................... 110
Maximum IDD vs. Frequency
(HS Mode, -40°C to 85°C) ...................... 110
Load Conditions...................................... 117
External Clock Timing............................. 118
CLKOUT and I/O Timing......................... 119
Reset, Watchdog Timer, Oscillator
Start-Up Timer, and Power-Up Timer
Timing ..................................................... 120
Brown-out Reset Timing ......................... 120
Timer0 Clock Timings ............................. 121
A/D Conversion Timing........................... 124
Typical IPD vs. VDD
(WDT Disabled, RC Mode) ..................... 125
Maximum IPD vs. VDD
(WDT Disabled, RC Mode) ..................... 125
Typical IPD vs. VDD @ 25°C
(WDT Enabled, RC Mode)...................... 126
Maximum IPD vs. VDD
(WDT Enabled, RC Mode)...................... 126
Typical RC Oscillator Frequency vs.
VDD ......................................................... 126
DS30390D-page 167
PIC16C71X
Figure 14-6:
Figure 14-7:
Figure 14-8:
Figure 14-9:
Figure 14-10:
Figure 14-11:
Figure 14-12:
Figure 14-13:
Figure 14-14:
Figure 14-15:
Figure 14-16:
Figure 14-17:
Figure 14-18:
Figure 14-19:
Figure 14-20:
Figure 14-21:
Figure 14-22:
Figure 14-23:
Figure 14-24:
Figure 14-25:
Figure 14-26:
Figure 14-27:
Figure 14-28:
Figure 14-29:
Figure 14-30:
Figure 15-1:
Figure 15-2:
Figure 15-3:
Figure 15-4:
Figure 15-5:
Figure 15-6:
Figure 16-1:
Figure 16-2:
Figure 16-3:
Typical RC Oscillator Frequency vs.
VDD .......................................................... 126
Typical RC Oscillator Frequency vs.
VDD .......................................................... 126
Typical IPD vs. VDD Brown-out Detect
Enabled (RC Mode) ................................ 127
Maximum IPD vs. VDD Brown-out Detect
Enabled
(85°C to -40°C, RC Mode) ...................... 127
Typical IPD vs. Timer1 Enabled (32 kHz,
RC0/RC1 = 33 pF/33 pF, RC Mode) ....... 127
Maximum IPD vs. Timer1 Enabled
(32 kHz, RC0/RC1 = 33 pF/33 pF,
85°C to -40°C, RC Mode)........................ 127
Typical IDD vs. Frequency
(RC Mode @ 22 pF, 25°C)...................... 128
Maximum IDD vs. Frequency
(RC Mode @ 22 pF, -40°C to 85°C)........ 128
Typical IDD vs. Frequency
(RC Mode @ 100 pF, 25°C).................... 129
Maximum IDD vs. Frequency
(RC Mode @ 100 pF, -40°C to 85°C)...... 129
Typical IDD vs. Frequency
(RC Mode @ 300 pF, 25°C).................... 130
Maximum IDD vs. Frequency
(RC Mode @ 300 pF, -40°C to 85°C)...... 130
Typical IDD vs. Capacitance @ 500 kHz
(RC Mode)............................................... 131
Transconductance(gm) of
HS Oscillator vs. VDD .............................. 131
Transconductance(gm) of
LP Oscillator vs. VDD ............................... 131
Transconductance(gm) of
XT Oscillator vs. VDD .............................. 131
Typical XTAL Startup Time vs.
VDD (LP Mode, 25°C).............................. 132
Typical XTAL Startup Time vs.
VDD (HS Mode, 25°C) ............................. 132
Typical XTAL Startup Time vs.
VDD (XT Mode, 25°C).............................. 132
Typical IDD vs. Frequency
(LP Mode, 25°C) ..................................... 133
Maximum IDD vs. Frequency
(LP Mode, 85°C to -40°C) ....................... 133
Typical IDD vs. Frequency
(XT Mode, 25°C) ..................................... 133
Maximum IDD vs. Frequency
(XT Mode, -40°C to 85°C) ....................... 133
Typical IDD vs. Frequency
(HS Mode, 25°C)..................................... 134
Maximum IDD vs. Frequency
(HS Mode, -40°C to 85°C)....................... 134
Load Conditions ...................................... 140
External Clock Timing ............................. 141
CLKOUT and I/O Timing ......................... 142
Reset, Watchdog Timer, Oscillator
Start-up Timer and Power-up Timer
Timing ..................................................... 143
Timer0 External Clock Timings ............... 144
A/D Conversion Timing ........................... 146
Typical RC Oscillator Frequency vs.
Temperature............................................ 147
Typical RC Oscillator Frequency vs.
VDD .......................................................... 147
Typical RC Oscillator Frequency vs.
VDD .......................................................... 147
DS30390D-page 168
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Figure 16-4:
Figure 16-5:
Figure 16-6:
Figure 16-7:
Figure 16-8:
Figure 16-9:
Figure 16-10:
Figure 16-11:
Figure 16-12:
Figure 16-13:
Figure 16-14:
Figure 16-15:
Figure 16-16:
Figure 16-17:
Figure 16-18:
Figure 16-19:
Figure 16-20:
Figure 16-21:
Figure 16-22:
Typical RC Oscillator Frequency vs.
VDD ......................................................... 148
Typical Ipd vs. VDD Watchdog Timer
Disabled 25°C......................................... 148
Typical Ipd vs. VDD Watchdog Timer
Enabled 25°C.......................................... 148
Maximum Ipd vs. VDD Watchdog
Disabled .................................................. 149
Maximum Ipd vs. VDD Watchdog
Enabled................................................... 149
Vth (Input Threshold Voltage) of
I/O Pins vs. VDD ...................................... 149
VIH, VIL of MCLR, T0CKI and OSC1
(in RC Mode) vs. VDD ............................. 150
VTH (Input Threshold Voltage)
of OSC1 Input (in XT, HS, and
LP Modes) vs. VDD ................................. 150
Typical IDD vs. Freq (Ext Clock, 25°C).... 151
Maximum, IDD vs. Freq (Ext Clock,
-40° to +85°C) ......................................... 151
Maximum IDD vs. Freq with A/D Off
(Ext Clock, -55° to +125°C) .................... 152
WDT Timer Time-out Period vs. VDD ...... 152
Transconductance (gm) of
HS Oscillator vs. VDD .............................. 152
Transconductance (gm) of
LP Oscillator vs. VDD .............................. 153
Transconductance (gm) of
XT Oscillator vs. VDD .............................. 153
IOH vs. VOH, VDD = 3V .......................... 153
IOH vs. VOH, VDD = 5V .......................... 153
IOL vs. VOL, VDD = 3V ........................... 154
IOL vs. VOL, VDD = 5V ........................... 154
1997 Microchip Technology Inc.
PIC16C71X
LIST OF TABLES
Table 1-1:
Table 3-1:
Table 4-1:
Table 4-2:
Table 5-1:
Table 5-2:
Table 5-3:
Table 5-4:
Table 6-1:
Table 7-1:
Table 7-2:
Table 7-3:
Table 7-4:
Table 8-1:
Table 8-2:
Table 8-3:
Table 8-4:
Table 8-5:
Table 8-6:
Table 8-7:
Table 8-8:
Table 8-9:
Table 8-10:
Table 8-11:
Table 8-12:
Table 8-13:
Table 9-1:
Table 9-2:
Table 10-1:
Table 11-1:
Table 11-2:
Table 11-3:
Table 11-4:
Table 11-5:
PIC16C71X Family of Devices.................... 4
PIC16C710/71/711/715 Pinout
Description .................................................. 9
PIC16C710/71/711 Special Function
Register Summary .................................... 14
PIC16C715 Special Function Register
Summary................................................... 15
PORTA Functions ..................................... 26
Summary of Registers Associated with
PORTA...................................................... 26
PORTB Functions ..................................... 28
Summary of Registers Associated with
PORTB...................................................... 29
Registers Associated with Timer0............. 35
TAD vs. Device Operating Frequencies,
PIC16C71.................................................. 41
TAD vs. Device Operating Frequencies,
PIC16C710/711, PIC16C715 .................... 41
Registers/Bits Associated with A/D,
PIC16C710/71/711.................................... 46
Registers/Bits Associated with A/D,
PIC16C715................................................ 46
Ceramic Resonators, PIC16C71............... 49
Capacitor Selection For Crystal
Oscillator, PIC16C71................................. 49
Ceramic Resonators,
PIC16C710/711/715.................................. 50
Capacitor Selection for Crystal
Oscillator, PIC16C710/711/715................. 50
Time-out in Various Situations,
PIC16C71.................................................. 54
Time-out in Various Situations,
PIC16C710/711/715.................................. 54
Status Bits and Their Significance,
PIC16C71.................................................. 55
Status Bits and Their Significance,
PIC16C710/711......................................... 55
Status Bits and Their Significance,
PIC16C715................................................ 55
Reset Condition for Special Registers,
PIC16C710/71/711.................................... 56
Reset Condition for Special Registers,
PIC16C715................................................ 56
Initialization Conditions For All Registers,
PIC16C710/71/711.................................... 57
Initialization Conditions for All Registers,
PIC16C715................................................ 58
Opcode Field Descriptions ........................ 69
PIC16CXX Instruction Set......................... 70
Development Tools From Microchip ......... 88
Cross Reference of Device Specs for
Oscillator Configurations and
Frequencies of Operation
(Commercial Devices)............................... 89
External Clock Timing Requirements........ 95
CLKOUT and I/O Timing Requirements.... 96
Reset, Watchdog Timer, Oscillator
Start-up Timer, Power-up Timer,
and Brown-out Reset Requirements ......... 97
Timer0 External Clock Requirements ....... 98
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Table 11-6:
Table 11-7:
Table 12-1:
Table 12-2:
Table 13-1:
Table 13-2:
Table 13-3:
Table 13-4:
Table 13-5:
Table 13-6:
Table 13-7:
Table 13-8:
Table 14-1:
Table 14-2:
Table 15-1:
Table 15-2:
Table 15-3:
Table 15-4:
Table 15-5:
Table 15-6:
Table 15-7:
Table 16-1:
A/D Converter Characteristics:
PIC16C710/711-04
(Commercial, Industrial, Extended)
PIC16C710/711-10
(Commercial, Industrial, Extended)
PIC16C710/711-20
(Commercial, Industrial, Extended)
PIC16LC710/711-04
(Commercial, Industrial, Extended) ...........99
A/D Conversion Requirements ............... 100
RC Oscillator Frequencies...................... 107
Capacitor Selection for Crystal
Oscillators ............................................... 108
Cross Reference of Device Specs for
Oscillator Configurations and
Frequencies of Operation
(Commercial Devices) ............................ 112
Clock Timing Requirements.................... 118
CLKOUT and I/O Timing Requirements . 119
Reset, Watchdog Timer, Oscillator
Start-up Timer, Power-up Timer,
and Brown-out Reset Requirements....... 120
Timer0 Clock Requirements ................... 121
A/D Converter Characteristics:
PIC16C715-04
(Commercial, Industrial, Extended)
PIC16C715-10
(Commercial, Industrial, Extended)
PIC16C715-20
(Commercial, Industrial, Extended) ........ 122
A/D Converter Characteristics:
PIC16LC715-04 (Commercial,
Industrial) ................................................ 123
A/D Conversion Requirements ............... 124
RC Oscillator Frequencies...................... 131
Capacitor Selection for Crystal
Oscillators ............................................... 132
Cross Reference of Device Specs
for Oscillator Configurations and
Frequencies of Operation
(Commercial Devices) ............................ 135
External Clock Timing Requirements ..... 141
CLKOUT and I/O Timing Requirements . 142
Reset, Watchdog Timer, Oscillator
Start-up Timer and Power-up Timer
Requirements ......................................... 143
Timer0 External Clock Requirements ..... 144
A/D Converter Characteristics ................ 145
A/D Conversion Requirements ............... 146
RC Oscillator Frequencies...................... 148
DS30390D-page 169
PIC16C71X
NOTES:
DS30390D-page 170
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
ON-LINE SUPPORT
Microchip provides two methods of on-line support.
These are the Microchip BBS and the Microchip World
Wide Web (WWW) site.
Use Microchip's Bulletin Board Service (BBS) to get
current information and help about Microchip products.
Microchip provides the BBS communication channel
for you to use in extending your technical staff with
microcontroller and memory experts.
To provide you with the most responsive service possible,
the Microchip systems team monitors the BBS, posts
the latest component data and software tool updates,
provides technical help and embedded systems
insights, and discusses how Microchip products provide project solutions.
The web site, like the BBS, is used by Microchip as a
means to make files and information easily available to
customers. To view the site, the user must have access
to the Internet and a web browser, such as Netscape or
Microsoft Explorer. Files are also available for FTP
download from our FTP site.
Connecting to the Microchip Internet Web Site
The Microchip web site is available by using your
favorite Internet browser to attach to:
www.microchip.com
The file transfer site is available by using an FTP service to connect to:
ftp://ftp.futureone.com/pub/microchip
The web site and file transfer site provide a variety of
services. Users may download files for the latest
Development Tools, Data Sheets, Application Notes,
User's Guides, Articles and Sample Programs. A variety of Microchip specific business information is also
available, including listings of Microchip sales offices,
distributors and factory representatives. Other data
available for consideration is:
• Latest Microchip Press Releases
• Technical Support Section with Frequently Asked
Questions
• Design Tips
• Device Errata
• Job Postings
• Microchip Consultant Program Member Listing
• Links to other useful web sites related to
Microchip Products
Connecting to the Microchip BBS
Connect worldwide to the Microchip BBS using either
the Internet or the CompuServe communications network.
Internet:
You can telnet or ftp to the Microchip BBS at the
address: mchipbbs.microchip.com
CompuServe Communications Network:
When using the BBS via the Compuserve Network,
in most cases, a local call is your only expense. The
Microchip BBS connection does not use CompuServe
membership services, therefore you do not need
CompuServe membership to join Microchip's BBS.
There is no charge for connecting to the Microchip BBS.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
The procedure to connect will vary slightly from country
to country. Please check with your local CompuServe
agent for details if you have a problem. CompuServe
service allow multiple users various baud rates
depending on the local point of access.
The following connect procedure applies in most locations.
1. Set your modem to 8-bit, No parity, and One stop
(8N1). This is not the normal CompuServe setting
which is 7E1.
2. Dial your local CompuServe access number.
3. Depress the <Enter> key and a garbage string will
appear because CompuServe is expecting a 7E1
setting.
4. Type +, depress the <Enter> key and “Host Name:”
will appear.
5. Type MCHIPBBS, depress the <Enter> key and you
will be connected to the Microchip BBS.
In the United States, to find the CompuServe phone
number closest to you, set your modem to 7E1 and dial
(800) 848-4480 for 300-2400 baud or (800) 331-7166
for 9600-14400 baud connection. After the system
responds with “Host Name:”, type NETWORK, depress
the <Enter> key and follow CompuServe's directions.
For voice information (or calling from overseas), you
may call (614) 723-1550 for your local CompuServe
number.
Microchip regularly uses the Microchip BBS to distribute
technical information, application notes, source code,
errata sheets, bug reports, and interim patches for
Microchip systems software products. For each SIG, a
moderator monitors, scans, and approves or disapproves files submitted to the SIG. No executable files
are accepted from the user community in general to
limit the spread of computer viruses.
Systems Information and Upgrade Hot Line
The Systems Information and Upgrade Line provides
system users a listing of the latest versions of all of
Microchip's development systems software products.
Plus, this line provides information on how customers
can receive any currently available upgrade kits.The
Hot Line Numbers are:
1-800-755-2345 for U.S. and most of Canada, and
1-602-786-7302 for the rest of the world.
970301
Trademarks: The Microchip name, logo, PIC, PICSTART,
PICMASTER and PRO MATE are registered trademarks
of Microchip Technology Incorporated in the U.S.A. and
other countries. FlexROM, MPLAB and fuzzyLAB, are
trademarks and SQTP is a service mark of Microchip in
the U.S.A.
fuzzyTECH is a registered trademark of Inform Software
Corporation. IBM, IBM PC-AT are registered trademarks
of International Business Machines Corp. Pentium is a
trademark of Intel Corporation. Windows is a trademark
and MS-DOS, Microsoft Windows are registered trademarks of Microsoft Corporation. CompuServe is a registered trademark of CompuServe Incorporated.
All other trademarks mentioned herein are the property of
their respective companies.
DS30272A-page 171
PIC16C71X
READER RESPONSE
It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip product. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation
can better serve you, please FAX your comments to the Technical Publications Manager at (602) 786-7578.
Please list the following information, and use this outline to provide us with your comments about this Data Sheet.
To:
Technical Publications Manager
RE:
Reader Response
Total Pages Sent
From: Name
Company
Address
City / State / ZIP / Country
Telephone: (_______) _________ - _________
FAX: (______) _________ - _________
Application (optional):
Would you like a reply?
Device: PIC16C71X
Y
N
Literature Number: DS30272A
Questions:
1. What are the best features of this document?
2. How does this document meet your hardware and software development needs?
3. Do you find the organization of this data sheet easy to follow? If not, why?
4. What additions to the data sheet do you think would enhance the structure and subject?
5. What deletions from the data sheet could be made without affecting the overall usefulness?
6. Is there any incorrect or misleading information (what and where)?
7. How would you improve this document?
8. How would you improve our software, systems, and silicon products?
DS30272A-page 172
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
PIC16C71X PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery refer to the factory or the listed sales office.
Examples
PART NO. -XX X /XX XXX
Pattern:
Package:
Temperature
Range:
Frequency
Range:
Device
QTP, SQTP, Code or Special Requirements
a)
JW
= Windowed CERDIP
SO
= SOIC
SP
= Skinny plastic dip
P
= PDIP
SS
= SSOP
b)
= 0°C to +70°C
I
= -40°C to +85°C
E
= -40°C to +125°C
04
= 200 kHz (PIC16C7X-04)
04
= 4 MHz
10
= 10 MHz
20
= 20 MHz
PIC16C7X
:VDD range 4.0V to 6.0V
PIC16C7XT :VDD range 4.0V to 6.0V (Tape/Reel)
PIC16LC7X :VDD range 2.5V to 6.0V
PIC16LC7XT :VDD range 2.5V to 6.0V (Tape/Reel)
PIC16C71 - 04/P 301
Commercial Temp.,
PDIP Package, 4 MHz,
normal VDD limits, QTP
pattern #301
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type (including LC devices).
Sales and Support
Products supported by a preliminary Data Sheet may possibly have an errata sheet describing minor operational differences and
recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office (see below)
2. The Microchip Corporate Literature Center U.S. FAX: (602) 786-7277
3. The Microchip’s Bulletin Board, via your local CompuServe number (CompuServe membership NOT required).
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
For latest version information and upgrade kits for Microchip Development Tools, please call 1-800-755-2345 or 1-602-786-7302.
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 173
PIC16C71X
NOTES:
DS30272A-page 174
Powered by ICminer.com Electronic-Library Service CopyRight 2003
1997 Microchip Technology Inc.
PIC16C71X
NOTES:
1997 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
DS30272A-page 175
WORLDWIDE SALES AND SERVICE
AMERICAS
AMERICAS (continued)
Corporate Office
Toronto
Singapore
Microchip Technology Inc.
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-786-7200 Fax: 480-786-7277
Technical Support: 480-786-7627
Web Address: http://www.microchip.com
Microchip Technology Inc.
5925 Airport Road, Suite 200
Mississauga, Ontario L4V 1W1, Canada
Tel: 905-405-6279 Fax: 905-405-6253
Microchip Technology Singapore Pte Ltd.
200 Middle Road
#07-02 Prime Centre
Singapore 188980
Tel: 65-334-8870 Fax: 65-334-8850
Atlanta
Microchip Asia Pacific
Unit 2101, Tower 2
Metroplaza
223 Hing Fong Road
Kwai Fong, N.T., Hong Kong
Tel: 852-2-401-1200 Fax: 852-2-401-3431
Microchip Technology Inc.
500 Sugar Mill Road, Suite 200B
Atlanta, GA 30350
Tel: 770-640-0034 Fax: 770-640-0307
Boston
Microchip Technology Inc.
5 Mount Royal Avenue
Marlborough, MA 01752
Tel: 508-480-9990 Fax: 508-480-8575
Chicago
Microchip Technology Inc.
333 Pierce Road, Suite 180
Itasca, IL 60143
Tel: 630-285-0071 Fax: 630-285-0075
Dallas
Microchip Technology Inc.
4570 Westgrove Drive, Suite 160
Addison, TX 75248
Tel: 972-818-7423 Fax: 972-818-2924
Dayton
Microchip Technology Inc.
Two Prestige Place, Suite 150
Miamisburg, OH 45342
Tel: 937-291-1654 Fax: 937-291-9175
Detroit
Microchip Technology Inc.
Tri-Atria Office Building
32255 Northwestern Highway, Suite 190
Farmington Hills, MI 48334
Tel: 248-538-2250 Fax: 248-538-2260
Los Angeles
Microchip Technology Inc.
18201 Von Karman, Suite 1090
Irvine, CA 92612
Tel: 949-263-1888 Fax: 949-263-1338
New York
Microchip Technology Inc.
150 Motor Parkway, Suite 202
Hauppauge, NY 11788
Tel: 631-273-5305 Fax: 631-273-5335
ASIA/PACIFIC
Hong Kong
ASIA/PACIFIC (continued)
Taiwan, R.O.C
Microchip Technology Taiwan
10F-1C 207
Tung Hua North Road
Taipei, Taiwan, ROC
Tel: 886-2-2717-7175 Fax: 886-2-2545-0139
EUROPE
Beijing
United Kingdom
Microchip Technology, Beijing
Unit 915, 6 Chaoyangmen Bei Dajie
Dong Erhuan Road, Dongcheng District
New China Hong Kong Manhattan Building
Beijing 100027 PRC
Tel: 86-10-85282100 Fax: 86-10-85282104
Arizona Microchip Technology Ltd.
505 Eskdale Road
Winnersh Triangle
Wokingham
Berkshire, England RG41 5TU
Tel: 44 118 921 5858 Fax: 44-118 921-5835
India
Denmark
Microchip Technology Inc.
India Liaison Office
No. 6, Legacy, Convent Road
Bangalore 560 025, India
Tel: 91-80-229-0061 Fax: 91-80-229-0062
Microchip Technology Denmark ApS
Regus Business Centre
Lautrup hoj 1-3
Ballerup DK-2750 Denmark
Tel: 45 4420 9895 Fax: 45 4420 9910
Japan
France
Microchip Technology Intl. Inc.
Benex S-1 6F
3-18-20, Shinyokohama
Kohoku-Ku, Yokohama-shi
Kanagawa 222-0033 Japan
Tel: 81-45-471- 6166 Fax: 81-45-471-6122
Arizona Microchip Technology SARL
Parc d’Activite du Moulin de Massy
43 Rue du Saule Trapu
Batiment A - ler Etage
91300 Massy, France
Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79
Korea
Germany
Microchip Technology Korea
168-1, Youngbo Bldg. 3 Floor
Samsung-Dong, Kangnam-Ku
Seoul, Korea
Tel: 82-2-554-7200 Fax: 82-2-558-5934
Arizona Microchip Technology GmbH
Gustav-Heinemann-Ring 125
D-81739 München, Germany
Tel: 49-89-627-144 0 Fax: 49-89-627-144-44
Shanghai
Arizona Microchip Technology SRL
Centro Direzionale Colleoni
Palazzo Taurus 1 V. Le Colleoni 1
20041 Agrate Brianza
Milan, Italy
Tel: 39-039-65791-1 Fax: 39-039-6899883
Microchip Technology
RM 406 Shanghai Golden Bridge Bldg.
2077 Yan’an Road West, Hong Qiao District
Shanghai, PRC 200335
Tel: 86-21-6275-5700 Fax: 86 21-6275-5060
San Jose
Microchip Technology Inc.
2107 North First Street, Suite 590
San Jose, CA 95131
Tel: 408-436-7950 Fax: 408-436-7955
Italy
11/15/99
Microchip received QS-9000 quality system
certification for its worldwide headquarters,
design and wafer fabrication facilities in
Chandler and Tempe, Arizona in July 1999. The
Company’s quality system processes and
procedures are QS-9000 compliant for its
PICmicro® 8-bit MCUs, KEELOQ® code hopping
devices, Serial EEPROMs and microperipheral
products. In addition, Microchip’s quality
system for the design and manufacture of
development systems is ISO 9001 certified.
All rights reserved. © 1999 Microchip Technology Incorporated. Printed in the USA. 11/99
Printed on recycled paper.
Information contained in this publication regarding device applications and the like is intended for suggestion only and may be superseded by updates. No representation or warranty is given and no liability is assumed
by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Microchip’s products
as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights. The Microchip
logo and name are registered trademarks of Microchip Technology Inc. in the U.S.A. and other countries. All rights reserved. All other trademarks mentioned herein are the property of their respective companies.
1999 Microchip Technology Inc.
Powered by ICminer.com Electronic-Library Service CopyRight 2003