PLTT Vishay Dale Thin Film Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance FEATURES • • • • • • • • Vishay’s proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for use in oil industry precision applications requiring low noise, long term stability under high temperature, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. • • • • - 55 °C to 215 °C operating temperature range TCR of ± 5 ppm/°C standard Tolerances to ± 0.02 % Anti corrosion resistant film with (SPM) special passivation method Stable film and performance characteristics 0.5 % max. at 2000 h, 215 °C, 25 % rated power Non-standard resistance values available Very low noise and voltage coefficient (< - 30 dB, 0.1 ppm/V) UL 94 V-0 flame resistant Gold terminations (10 μ" to 20 μ") Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC 61249-2-21 definition CONSTRUCTION SPM Passivation Enhancement TYPICAL PERFORMANCE Passivated Nichrome Resistive Film Plated Gold (10 μ" to 20 μ") ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 5 TOL. 0.02 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material - 250 to 3 M - ± 5 ppm/°C - 55 °C to + 125 °C Resistance Range TCR: Absolute Tolerance: Absolute ± 0.1 % to ± 0.02 % + 25 °C R ± 0.5 % 2000 h at 215 °C, 25 % rated power - - ± 0.1 ppm/V (typical) - Stability: Absolute Stability: Ratio Voltage Coefficient CONDITIONS Passivated nichrome Working Voltage 100 V to 200 V - Operating Temperature Range - 55 °C to + 215 °C - Storage Temperature Range - 55 °C to + 215 °C - < - 35 dB (typical) - R ± 0.01 % 1 year at + 25 °C Noise Shelf Life Stability: Absolute COMPONENT RATINGS POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0805 250 at 70 °C 100 250 to 260K 1206 400 at 70 °C 200 500 to 775K 2010 800 at 70 °C 200 500 to 2M 2512 1000 at 70 °C 200 500 to 3M CASE SIZE Note • Consult factory for additional case size * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60082 Revision: 09-May-11 For technical questions, contact: [email protected] www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT Vishay Dale Thin Film Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance DIMENSIONS in inches D W T E L TERM L W T D E 0805 G 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005 1206 G 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 2010 G 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2512 G 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS - TYPICAL DERATING CURVE 10 k R ± (%) 100 k R ± (%) Thermal Shock 0.02 0.02 Short Time Overload 0.01 0.01 Low Temperature Operation 0.01 0.01 Resistance to Solder Heat 0.01 0.01 Moisture Resistance 0.02 0.02 High Temperature Exposure 0.02 0.02 Load Life (25 % Power, 2000 h, + 215 °C) 0.5 0.5 ± 5 ppm/°C ± 5 ppm/°C ENVIRONMENTAL TEST TCR 75 50 25 0 0 0.50 0.40 0.40 0.30 0.30 0.10 0.00 - 0.10 Test Conditions: Case Size: 0805 Resistance Value: 500 Ω Applied Power: 25 % of rated power Test Chamber Temperature: 215 °C - 0.20 - 0.30 - 0.40 - 0.50 125 250 425 500 750 1000 1100 1250 1525 1775 2000 230 0.20 0.10 0.00 - 0.10 Test Conditions: Case Size: 0805 Resistance Value: 50 kΩ Applied Power: 25 % of rated power Test Chamber Temperature: 215 °C - 0.20 - 0.30 - 0.40 - 0.50 0 215 PLTT0805 50 k STABILITY TEST RESULTS 0.50 0.20 70 Ambient Temperature °C Maximum Δ (%) Maximum Δ (%) PLTT0805 500 STABILITY TEST RESULTS 100 Percent of Rated Power CASE SIZE 0 125 250 425 500 750 1000 1100 1250 1525 1775 2000 Time on Test (h) Time on Test (h) Note • Performance obtained with following mounting conditions PCB: Polymide IPC-7831A STD land patterns Solder paste: PbSnAg (93.5/5/1.5) www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 60082 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT Precision Low TCR High Temperature Thin Film Vishay Dale Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance GLOBAL PART NUMBER INFORMATION P L T T 0 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PLTT 0805 1206 2010 2512 Z = ± 5 ppm/°C 8 0 5 Z 1 0 0 1 Q G T 1 RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % G = Wraparound Gold over Ni barrier (10 μ" min. Au) WS = WAFFLE WI = 100 min./1mult (item single lot date code) WP = 100 min./1mult (package unit single lot date code) Example: 1001 = 1 k 2500 = 250 Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. TAPE AND REEL T1 = 1000 min., 100 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min./1mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) 982R6 = 982.6 532R41 = 532.41 Document Number: 60082 Revision: 09-May-11 For technical questions, contact: [email protected] www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1