PME278 • EMI suppressor, class X1, metallized paper • 0.001 – 0.15 µF, 440 VAC, +110 °C • High dU/dt capability. • Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. • Good resistance to ionisation due to impregnated dielectric. • The capacitors meet the most stringent IEC humidity class, 56 days. • The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. L The capacitors are intended for use as interference suppressors in X1, acrossthe-line, 440 VAC applications. B CONSTRUCTION Multi-layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. H TYPICAL APPLICATIONS p ± 0.5 Rated voltage 440 VAC 50/60 Hz Capacitance range 0.001 – 0.15 µF Capacitance tolerance ± 20% Temperature range –40 to +110°C Climatic category IEC 40/110/56/B Approvals S, N, D, FI, VDE, SEV, IMQ δ Dissipation factor tanδ ≤ 1.3 % at 1 kHz Insulation resistance ≥ 12000 MΩ Measured at 500 VDC after 60 s, +23°C Resonance frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead length. In DC applications Recommended voltage: ≤ 1000 VDC Test voltage between terminals The 100% screening factory test is carried out at 2700 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. ∅d l TECHNICAL DATA d = 0.6 for p = 10.2 0.8 for p = 15.2 and 20.3 1.0 for p = 25.4 l = standard : 30 +5/-0 mm option : short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hour each 10 – 500 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Bump IEC 60068-2-29 Test Eb 4000 bumps at 390 m/s2 No visible damage No open or short circuit Solderability IEC 60068-2-20 Test Ta Solder globule method Wetting time Active flammability EN 132400 Passive flammability IEC 60384-14 (1993) EN 132400 Humidity IEC 60068-2-3 Test Ca +40°C and 90 – 95% R.H. 56 days 168 for d ≤ 0.8 < 1 s for d > 0.8 < 1.5 s PME278 ARTICLE TABLE µF B H L p Quantity per package R30 R06 reel taped pcs pcs pcs fO Max dU/dt g MHz V/µs Weight Approvals S N D FI VDE SEV IMQ Capaci- Max dimensions tance in mm Article code 0.0010 0.0015 0.0022 0.0033 0.0047 3.9 7.5 3.9 7.5 3.9 7.5 4.1 8.2 5.1 10.5 13.5 13.5 13.5 13.5 13.5 10.2 10.2 10.2 10.2 10.2 1000 1000 1000 1000 800 2000 2000 2000 2000 1600 700 700 700 600 600 0.7 0.7 0.7 0.9 1.2 53.0 44.0 37.0 30.0 24.0 2000 2000 2000 2000 2000 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ PME278RA4100MR30 PME278RA4150MR30 PME278RA4220MR30 PME278RA4330MR30 PME278RA4470MR30 0.0068 0.010 0.015 0.022 5.2 5.2 5.5 8.5 10.5 10.5 11.1 14.3 18.5 18.5 18.5 18.5 15.2 15.2 15.2 15.2 500 500 500 300 1000 1000 1000 500 600 600 500 350 1.7 1.7 2.0 3.8 18.5 15.5 13.0 9.6 1400 1400 1400 1400 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ PME278RB4680MR30 PME278RB5100MR30 PME278RB5150MR30 PME278RB5220MR30 0.033 0.047 0.068 7.6 14.0 9.0 15.0 11.3 16.5 24.0 24.0 24.0 20.3 20.3 20.3 250 200 150 1500 1200 1000 250 250 180 4.0 5.0 7.0 9.6 7.5 6.2 1000 1000 1000 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ PME278RC5330MR30 PME278RC5470MR30 PME278RC5680MR30 0.033 0.047 0.068 0.10 8.0 8.0 10.0 12.0 17.0 17.0 19.0 22.0 27.0 27.0 27.0 27.0 22.5 22.5 22.5 22.5 200 200 150 100 1200 1200 1000 800 250 250 200 180 5.5 5.5 7.5 10.0 7.2 6.0 4.8 3.6 1000 1000 1000 600 √ √ √ √ √ √ √ √ PME278RD5330MR30 PME278RD5470MR30 PME278RD5680MR30 PME278RD6100MR30 0.10 0.15 12.1 19.0 15.3 22.0 30.5 30.5 25.4 25.4 100 75 800 600 10.0 15.0 3.9 3.2 600 600 √ √ √ √ √ √ √ √ √ √ √ √ √ √ PME278RE6100MR30 PME278RE6150MR30 Specification Approval reference S N D Fl VDE SEV IMQ EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 9516076 P95101829 303938 182572-01 89760 95.7 70725 V4070 ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body √ √ √ √ • • • • • • • RIFA RIFA article code Rated capacitance Rated voltage X1 SH, for self healing Climatic category according to IEC 60068-1, appendix A • Passive flammability class • Approval marks • Manufacturing code (year, month) PACKING Capacitors in standard design (lead length 30 mm) and with L < 24 mm and lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/ package as per article table. Capacitors with L ≥ 24 mm and lead length 5 or 6 mm are packed on trays piled in a box with dimensions 300 x 260 x 195 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 169