PMR210 • RC unit, class X1, metallized paper with integrated resistor • 0.022 – 0.1 µF, 100 Ω, 250 VAC, +85 °C • • • • RC unit for safety applications. Small dimensions High dU/dt capability. Self-extinguishing encapsulation. The material is recognized acc. to UL 94 V-0 • Good resistance to ionisation due to impregnated dielectric. • Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. • The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. L Single layer metallized paper, encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. The resistance in the metal layer is utilized as series resistance, integrated resistor. RC unit for use in DC and AC applications for: – contact protection – interference suppression of contacts – transient suppression H CONSTRUCTION p ± 0.5 ∅d l TYPICAL APPLICATIONS R TECHNICAL DATA Rated voltage 250 VAC, 50/60 Hz Capacitance range Capacitance tolerance 0.022–0.1 µF ± 20% Resistance range Resistance tolerance 100 Ω ± 30% Peak pulse voltage 1000 V Temperature range Climatic category –40 to +85°C 40/085/56/B Approvals S, N, D, FI, VDE, SEV, UL Series resistance The series resistance is defined at 100 kHz Insulation resistance ≥ 1000 MΩ Measured at 500 VDC after 2 min, +23°C Pulse current Max 12 A repetitive. Max 20 A peak for occasional transients. Test voltage between terminals The 100% screening factory test is carried out at 3000 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. In DC applications Recommended voltage ≤ 1000 VDC. Power ratings The average losses may reach 0.5 W provided the surface temperature does not exceed + 85°C. For maximum permitted power dissipation vs temperature, see derating curves. 198 B C d = 0.8 for p = 15.2 and 20.3 1.0 for p = 25.4 l: standard: 30 +5/-0 mm option: short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request. Curve Dimensions 1 1 2 3 4 B = 7.3 B = 8.5 B = 9.0 B = 11.3 B = 10.6 Pmax W 1 0.5 0 2 3 4 Tamb 40 50 60 70 80 85 °C Maximum allowable power dissipation vs ambient temperature and case sizes. PMR210 ARTICLE TABLE Resis- Max dimensions in mm tance Ω B H L p Quantity per package reel Weight Approvals R30 R06 taped pcs pcs pcs g 0.022 0.033 100 100 7.3 8.5 13.0 14.3 19.0 18.5 15.2 15.2 400 300 800 500 400 350 3.0 3.8 √ √ √ √ √ √ √ √ √ √ √ √ √ √ PMR210MB5220M100R30 PMR210MB5330M100R30 0.047 0.068 100 100 9.0 11.3 15.0 16.5 24.0 24.0 20.3 20.3 200 150 1200 1000 250 180 5.0 7.0 √ √ √ √ √ √ √ √ √ √ √ √ √ √ PMR210MC5470M100R30 PMR210MC5680M100R30 0.10 100 10.6 16.1 30.5 25.4 150 1000 8.0 √ √ √ √ √ √ √ PMR210ME6100M100R30 S N D FI VDE SEV UL Capacitance µF MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference S FI N D VDE SEV UL EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 UL 1414 Across-the-line (UR = 250 VAC) 9528106 184191-01 293103075 303424 91806 00-1928 E 73869 ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6 3 directions at 2 hour each Test Fc 10 – 500 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Bump IEC 60068-2-29 4000 bumps at 390 m/s2 Test Eb No visible damage No open or short circuit Solderability IEC 60068-2-20 Solder globule method Test Ta Wetting time for d ≤ 0.8 < 1 s for d > 0.8 < 1.5 s Active EN 132400 flammability Passive IEC 60384-14 (1993) flammability EN 132400 UL 1414 Enclosure material of UL 94V-0 flammability class Humidity IEC 60068-2-3 +40°C and 90 – 95% R.H. Test Ca Article code • • • • • • • • RIFA RIFA article code RC unit Rated capacitance and resistance Rated voltage IEC 60065 SH, for self-healing Climatic category according to IEC 60068-1, appendix A • Passive flammability class • Approval marks • Manufacturing code (year, month) PACKING RC units in standard design (lead length 30 mm) and with L < 24 mm and lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/ package as per article table. RC units with L ≥ 24 mm and lead length 5 or 6 mm are packed on trays piled in a box with dimensions 300 x 260 x 195 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimensions 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 56 days ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. 199