UNISONIC TECHNOLOGIES CO., LTD PN2222A NPN SILICON TRANSISTOR NPN GENERAL PURPOSE AMPLIFIER FEATURES * This device is for use as a medium power amplifier and switch requiring collector currents up to 500mA. ORDERING INFORMATION Normal PN2222A-AB3-R PN2222A-T92-B PN2222A-T92-K Ordering Number Lead Free Plating PN2222AL-AB3-R PN2222AL-T92-B PN2222AL-T92-K Halogen Free PN2222AG-AB3-R PN2222AG-T92-B PN2222AG-T92-K www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd Package SOT-89 TO-92 TO-92 Pin Assignment 1 2 3 B C E E B C E B C Packing Tape Reel Tape Box Bulk 1 of 6 QW-R208-022.D PN2222A NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (TA=25℃, unless otherwise specified) PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current RATINGS UNIT 75 V 40 V 6 V 0.6 A SOT-89 1.2 Total Device Dissipation PC W TO-92 0.6 ℃ Junction Temperature TJ +150 ℃ Storage Temperature TSTG -55 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCBO VCEO VEBO IC THERMAL DATA (TA=25℃, unless otherwise noted) PARAMETER SYMBOL SOT-89 TO-92 Junction to Ambient θJA RATINGS 104 200 UNIT ℃/W ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current Collector Cut-Off Current Emitter Cut-Off Current Base Cut-Off Current ON CHARACTERISTICS DC Current Gain SYMBOL BVCBO BVCEO BVEBO ICEO ICBO IEBO IBL hFE Collector-Emitter Saturation Voltage (Note) VCE(SAT) Base-Emitter Saturation Voltage (Note) VBE(SAT) SMALL SIGNAL CHARACTERISTICS Transition Frequency Output Capacitance Input Capacitance Collector Base Time Constant Noise Figure fT Cobo Cibo rb'Cc NF Real Part of Common-Emitter High Frequency Input Impedance TEST CONDITIONS IC=10μA, IE=0 IC=10mA, IB=0 IE=10μA, IC=0 VCE=60V, VEB(OFF)=3.0V VCB=60V, IE=0 VEB=3.0V, IC=0 VCE=60V, VEB(OFF)=3.0V 75 40 6 IC=0.1mA, VCE=10V IC=1.0mA, VCE=10V IC=10mA, VCE=10V IC=150mA, VCE=10V (Note) IC=150mA, VCE=1.0V (Note) IC=500mA, VCE=10V (Note) 35 50 75 100 50 40 TYP MAX UNIT 10 0.01 10 20 V V V nA μA nA nA 300 IC=150mA, IB=15mA 0.3 IC=500mA, IB=50mA IC=150mA, IB=15mA IC=500mA, IB=50mA 1.0 1.2 IC=20mA, VCE=20V, f=100MHz VCB=10V, IE=0, f=100kHz VEB=0.5V, IC=0, f=100kHz IC=20mA, VCB=20V, f=31.8MHz IC=100μA, VCE=10V, RS=1.0kΩ, f=1.0kHz Re(hje) IC=20mA, VCB=20V, f=300MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 0.6 2.0 300 V V 8.0 25 150 MHz pF pF pS 4.0 dB 60 Ω 2 of 6 QW-R208-022.D PN2222A NPN SILICON TRANSISTOR ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS SWITCHING CHARACTERISTICS Delay time tD VCC=30V, VBE(OFF)=0.5V Rise time tR IC=150mA, IB1=15mA Storage time tS VCC=30V, IC=150mA Fall time tF IB1= IB2=15mA Note: Pulse test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 10 25 225 60 ns ns ns ns 3 of 6 QW-R208-022.D PN2222A NPN SILICON TRANSISTOR TEST CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 6 QW-R208-022.D PN2222A NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R208-022.D PN2222A NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS(Cont.) 400 Switching Times vs. Collector Current Turn On and Turn Off Times vs. Collector Current IC IB1=IB2= 10 400 IB1=IB2= 320 320 VCC =25V Time (ns) Time (ns) VCC =25V 240 160 240 tS 160 tF 80 tOFF 80 tR tD tON 0 10 IC 10 100 1000 Collector Current, IC (mA) 0 10 100 Collector Current, IC (mA) 1000 Power Dissipation vs. Ambient Temperature 1.25 SOT-89 1 0.75 0.5 TO-92 0.25 0 0 25 75 100 125 50 Temperature (℃) 150 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R208-022.D