VISHAY PRO0200Z301001FN3

PR01/02/03
www.vishay.com
Vishay BCcomponents
Power Metal Film Leaded Resistors
FEATURES
• High power in small packages (1 W/0207 size to
3 W/0617 size)
• Different
lead
applications
materials
for
different
• Defined interruption behaviour
• Technology: Metal film
• AEC-Q200 qualified (PR01 and PR02)
DESCRIPTION
• Lead (Pb)-free solder contacts
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper or copper-clad iron are welded to the end-caps. The
resistors are coated with a red, non-flammable lacquer
which provides electrical, mechanical and climatic
protection. This coating is not resistant to aggressive fluxes
and cleaning solvents. The encapsulation is resistant to all
cleaning solvents in accordance with IEC 60068-2-45.
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• All general purpose power applications

TECHNICAL SPECIFICATIONS
UNIT
PR01
PR02
Cu-lead
PR02
FeCu-lead
PR03
Cu-lead
PR03
FeCu-lead
Resistance range (2)

0.22 to 1M
0.33 to 1M
1 to 1M
0.68 to 1M
1 to 1M
Resistance tolerance
%
± 1; ± 5
± 1; ± 5
± 1; ± 5
± 1; ± 5
± 1; ± 5
DESCRIPTION
± 1 (E24, E96); ± 5 (E24 series) (1)
Resistance series
Rated dissipation, P70
1  R
W
1
2
0.6
Thermal resistance (Rth)
K/W
135
Temperature coefficient
ppm/K
V
R<1
Maximum permissible voltage 
(Umax. AC/DC)
1.3
3
1.2
-
1.6
-
75
115
60
75
 ± 250
 ± 250
 ± 250
 ± 250
 ± 250
350
500
500
750
750
Basic specifications
2.5
IEC 60115-1
Climatic category (IEC 60068-1)
55/155/56
Stability after:
Load (1000 h, P70)
R max.: ± (5 % R + 0.1 )
Long term damp heat test (56 days)
R max.: ± (3 % R + 0.1 )
Soldering (10 s, 260 °C)
R max.: ± (1 % R + 0.05 )
Notes
• R value is measured with probe distance of 24 mm ± 1 mm using 4-terminal method.
(1) 1 % tolerance is available for R -range from 1 R upwards.
n
(2) Ohmic values (other than resistance range) are available on request.
Revision: 24-Jun-13
Document Number: 28729
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: PR02000201001JA100
P
R
0
2
0
0
MODEL/SIZE
VARIANT
WIRE
TYPES
PR0100
PR0200
PR0300
0 = Neutral
Z = Value
overflow
(Special)
1 = Cu 0.6
2 = Cu 0.8
3 = FeCu 0.6
4 = FeCu 0.8
0
2
0
1
0
0
1
J
A
TCR/MATERIAL
VALUE
TOLERANCE
0 = Standard
3 digit value
1 digit multiplier
MULTIPLIER
F=±1%
J=±5%
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
1
0
0
PACKAGING (1)
N4
N3
A5
A1
AC
R5
2 = *102
3 = *103
4 = *104
5 = *105
R2
L1
DC
K1
B1
PC
SPECIAL
The 2 digits
are used for
all special
parts.
00 = Standard
Product Description: PR02 5 % A1 1K0
PR02
5%
MODEL/SIZE
PR01
PR02
PR03
TOLERANCE
±1%
±5%
A1
1K0
(1)
PACKAGING
N4
L1
N3
DC
A5
K1
A1
B1
AC
PC
R5
R2
RESISTANCE VALUE
1K0 = 1 k
4K75 = 4.75 k
Notes
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products.
(1) Please refer to table PACKAGING for details.
PACKAGING
MODEL
TAPING
Axial, 52 mm
Wire Cu 0.6 mm
and FeCu 0.6 mm
PR01
Radial
Wire Cu 0.6 mm
Axial, 52 mm
Wire Cu 0.8 mm
and FeCu 0.6 mm
PR02
Radial
Wire Cu 0.8 mm
and FeCu 0.6 mm
Axial, 63 mm
Wire Cu 0.8 mm
and FeCu 0.6 mm
PR03
Radial
Wire Cu 0.8 mm
and FeCu 0.6 mm
Revision: 24-Jun-13
AMMO PACK
REEL
BULK, DOUBLE KINK
PIECES
CODE
PIECES
CODE
5000
A5
5000
R5
1000
A1
4000
N4
1000
A1
5000
only with
Cu 0.8 mm
R5
3000
only with
Cu 0.8 mm
N3
2000
only with
Cu 0.8 mm
R2
500
PITCH
PIECES
CODE
17.8 mm
Wire Cu 0.6 mm
or FeCu 0.6 mm
1000
L1
12.5 mm
Wire FeCu 0.6 mm
1000
K1
17.8 mm
Wire Cu 0.8 mm
and FeCu 0.6 mm
1000
L1
15.0 mm
only with FeCu 0.8 mm
Wire FeCu 0.6 mm
1000
B1
25.4 mm
Wire Cu 0.8 mm
and FeCu 0.6 mm
500
DC
20 mm
Wire FeCu 0.8 mm
500
PC
AC
Document Number: 28729
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
DIMENSIONS
L1
Ø d
ØD
L2
Type with straight leads
DIMENSIONS - Straight lead type and relevant physical dimensions; see straight leads outline
Ød
(mm)
TYPE
Ø DMAX.
(mm)
L1 MAX.
(mm)
L2 MAX.
(mm)
Cu
FeCu
PR01
2.5
6.5
8.0
0.58 ± 0.05
-
PR02
3.9
10.0
12.0
0.78 ± 0.05
0.58 ± 0.05
PR03
5.2
16.7
19.5
0.78 ± 0.05
0.58 ± 0.05
ØD
P1 ± 0.5
P1 ± 0.5
8+2
L1
L2
4.5 + 10
Ød
P2 ± 3
S
Type with double kink
b1
b2
ØB
± 0.07
Dimensions in millimeters
DIMENSIONS - Double kink lead type and relevant physical dimensions; see double kinked outline
TYPE
PR01
PR02
PR03
Ød
(mm)
LEAD STYLE
b1
(mm)
b2
(mm)
1.10
+ 0.25/- 0.20
1.45
+ 0.25/- 0.20
Cu
FeCu
Double kink
17.8 mm pitch
0.58 ± 0.05
0.58 ± 0.05
Double kink
12.5 mm pitch
-
0.58 ± 0.05
1.10
+ 0.25/- 0.20
1.45
+ 0.25/- 0.20
Double kink
17.8 mm pitch
0.78 ± 0.05
0.58 ± 0.05
1.10
+ 0.25/- 0.20
1.45
+ 0.25/- 0.20
Double kink
12.5 mm pitch
-
0.78 ± 0.05
1.30
+ 0.25/- 0.20
1.65
+ 0.25/- 0.20
Double kink
17.8 mm pitch
0.78 ± 0.05
0.58 ± 0.05
1.10
+ 0.25/- 0.20
1.65
+ 0.25/- 0.20
Double kink
12.5 mm pitch
-
1.30
+ 0.25/- 0.20
2.15
+ 0.25/- 0.20
Revision: 24-Jun-13
0.78 ± 0.05
Ø DMAX.
(mm)
P1
(mm)
P2
(mm)
SMAX.
(mm)
ØB
(mm)
17.8
17.8
2
0.8
12.5
12.5
2
0.8
17.8
17.8
2
0.8
15.0
15.0
2
1.0
25.4
25.4
2
1.0
22.0
20.0
2
1.0
2.5
3.9
5.2
Document Number: 28729
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
PRODUCTS WITH RADIAL LEADS (PR01, PR02)
P2
P
H1
H
H0
L
L1
W0
W
F
P0
P1
D0
DIMENSIONS - Radial taping
SYMBOL
PARAMETER
VALUE
TOLERANCE
UNIT
P
Pitch of components
12.7
± 1.0
mm
P0
Feed-hole pitch
12.7
± 0.2
mm
P1
Feed-hole centre to lead at topside at the tape
3.85
± 0.5
mm
P2
Feed-hole center to body center
6.35
± 1.0
mm
F
Lead-to-lead distance
4.8
+ 0.7/- 0
mm
W
Tape width
18.0
± 0.5
mm
W0
Minimum hold down tape width
5.5
-
mm
Component height PR01
29
Max.
Component height PR02
29
± 3.0
H0
Lead wire clinch height
16.5
± 0.5
mm
H
Height of component from tape center
19.5
±1
mm
D0
Feed-hole diameter
4.0
± 0.2
mm
L
Maximum length of snipped lead
11.0
-
mm
L1
Minimum lead wire (tape portion) shortest lead
2.5
-
mm
H1
mm
Note
• Please refer Packaging document (www.vishay.com/doc?28721) for more detail.
Revision: 24-Jun-13
Document Number: 28729
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
MOUNTING
MASS PER UNIT
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
MASS
(mg)
212
TYPE
PR01 Cu 0.6 mm
PR01 FeCu 0.6 mm
207
PR02 Cu 0.8 mm
504
PR02 FeCu 0.6 mm
455
PR02 FeCu 0.8 mm
496
PR03 Cu 0.8 mm
1192
PR03 FeCu 0.6 mm
1079
PR03 FeCu 0.8 mm
1185
MOUNTING PITCH
TYPE
PITCH
mm
e
5 (1)
12.5 (1)
LEAD STYLE
Straight leads
PR01
Radial taped
4.8
Double kink large pitch
17.8
7
Double kink small pitch
12.5
5
Straight leads
15.0 (1)
6 (1)
2
MARKING
The nominal resistance and tolerance are marked on the
resistor using four or five colored bands in accordance with
IEC 60062, marking codes for resistors and capacitors.
PR02
OUTLINES
PR03
The length of the body (L1) is measured by inserting the
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (IEC 60294).
2
Radial taped
4.8
Double kink large pitch
17.8
7
Double kink small pitch
15.0
6
Straight leads
23.0 (1)
9 (1)
Double kink large pitch
25.4
10
Double kink small pitch
20.0
8
Note
(1) Recommended minimum value.
FUNCTIONAL DESCRIPTION
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the E96/E24 series for resistors with a tolerance of ± 1 % or ± 5 %. 
The values of the E96/E24 series are in accordance with IEC 60063.
FUNCTIONAL PERFORMANCE
P
(W)
1.00
Tamb = 40 °C
70 °C
P
(W)
100 °C
0.75
Tamb = 40 °C
3.00
100 °C
125 °C
2.25
125 °C
155 °C
1.50
0.50
70 °C
155 °C
0.75
0.25
Tm (°C)
0
0
00
250 °C
<1
≤ 5 kΩ
1 k
Ω
>5
1 k
Ω
10
10
h
1
h
T m (°C)
h
00
00
0
1
0h
00
10 0 h
0
10
<
< 3 1 kΩ
0k
Ω
>3
0k
Ω
h
00
00
00
205 °C
10
5.0
2.0
0.5
1.0
0.2 0.1 % ΔR
10
PR01 Drift nomogram
P
(W)
2.00
5.0
2.0
1.0
0.5
0.2 0.1 % ΔR
PR03 Drift nomogram
Tamb = 40 °C
70 °C
100 °C
1.50
Note
• The maximum permissible hot-spot temperature is 205 °C for
PR01, 220 °C for PR02 and 250 °C for PR03.
125 °C
1.00
155 °C
0.50
0
0
h
Tm (°C)
00
10
0
10
<
< 3 1 kΩ
9
> 3 kΩ
9k
Ω
h
00
00
h
10
10
5.0
2.0
1.0
220 °C
0.5
0.2 0.1 % ΔR
PR02 Drift nomogram
Revision: 24-Jun-13
Document Number: 28729
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
DERATING
The power that the resistor can dissipate depends on the operating temperature.
Pmax.
(% Prated)
100
50
0
- 55
0
50
70
100
Tamb (°C)
155
Maximum dissipation (Pmax.) in percentage of rated power as a function of the ambient temperature (Tamb)
PULSE LOADING CAPABILITIES
103
Pmax.
(W)
102
10
t p /t i = 1000
500
200
100
50
20
10
5
2
1
10-1
10-6
10-5
10-4
10-3
10-2
10-1
ti (s)
1
PR01 Pulse on a regular basis; maximum permissible peak pulse power ( Pˆ max.) as a function of pulse duration (ti)
1200
Umax.
(V)
1000
800
600
400
200
0
10-6
10-5
10-4
10-3
10-2
10-1
t i (s)
1
PR01 Pulse on a regular basis; maximum permissible peak pulse voltage (Ûmax.) as a function of pulse duration (ti)
Revision: 24-Jun-13
Document Number: 28729
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
PULSE LOADING CAPABILITIES
103
Pmax.
(W)
102
10
t p/ t i = 1000
500
200
100
50
20
10
5
2
1
10-1
10-6
10-5
10-4
10-3
10-2
10-1
ti (s)
1
PR02 Pulse on a regular basis; maximum permissible peak pulse power ( Pˆ max.) as a function of pulse duration (ti)
1700
Umax.
(V)
1500
1300
1100
900
700
500
10-6
10-5
10-4
10-3
10-2
10-1
1
t i (s)
PR02 Pulse on a regular basis; maximum permissible peak pulse voltage (Ûmax.) as a function of pulse duration (ti)
104
Pmax.
(W)
103
102
t p/ t i = 1000
500 200
100
50
20
10
5
10
2
1
10-6
10-5
10-4
10-3
10-2
10-1
t i (s)
1
PR03 Pulse on a regular basis; maximum permissible peak pulse power ( Pˆ max.) as a function of pulse duration (ti)
Revision: 24-Jun-13
Document Number: 28729
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
PULSE LOADING CAPABILITIES
2400
Umax.
(V)
2000
1600
1200
800
400
0
10-6
10-5
10-4
10-3
10-2
10-1
1
t i (s)
PR03 Pulse on a regular basis; maximum permissible peak pulse voltage (Ûmax.) as a function of pulse duration (ti)
INTERRUPTION CHARACTERISTICS
10 2
10 2
t
(s)
t
(s)
10
10
1
1
10 -1
0
10
20
30
40
Poverload (W)
50
PR01 Time to interruption as a function of overload power
for range: 0 R 22 R  1 R
This graph is based on measured data under constant voltage
conditions; the data may deviate according to the applications.
10-1
0
20
10
30
40
Poverload (W)
50
PR01 Time to interruption as a function of overload power
for range: 16 R  Rn  560 R
This graph is based on measured data under constant voltage
conditions; the data may deviate according to the applications.
10 2
10 2
t
(s)
t
(s)
10
10
1
1
10 -1
10 - 1
0
10
20
30
40
Poverload (W)
50
PR01 Time to interruption as a function of overload power
for range: 1 R  Rn  15 R
This graph is based on measured data under constant voltage
conditions; the data may deviate according to the applications.
Revision: 24-Jun-13
0
20
40
60
80
100
120
Poverload (W)
PR02 Time to interruption as a function of overload power
for range: 0.33 R  Rn  5 R
This graph is based on measured data under constant voltage
conditions; the data may deviate according to the applications.
Document Number: 28729
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
INTERRUPTION CHARACTERISTICS
APPLICATION INFORMATION
100
10 2
∆T
(K)
t
(s)
80
10
60
15 mm
40
20 mm
25 mm
1
20
0
10-1
0
20
40
60
80
100
0
120
Poverload (W)
PR02 Time to interruption as a function of overload power
for range: 5 R  Rn  68 R
This graph is based on measured data under constant voltage
conditions; the data may deviate according to the applications.
0.4
0.8
P (W)
1.2
Ø 0.6 mm Cu-leads
Minimum distance from resistor body to PCB = 1 mm
PR01 Temperature rise (T) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
200
10 2
∆T
(K)
t
(s)
160
10
120
80
1
40
0
0
10 -1
0
20
40
60
80
100
120
Poverload (W)
PR02 Time to interruption as a function of overload power
for range: 68 R  Rn  560 R
This graph is based on measured data under constant voltage
conditions; the data may deviate according to the applications.
0.4
0.8
P (W)
1.2
Ø 0.6 mm Cu-leads
PR01 Hot-spot temperature rise (T) as a function
of dissipated power.
200
∆T
(K)
10 2
t
(s)
160
120
10
80
1
40
0
10 -1
0
0
50
100
150
200
250
Poverload (W)
PR03 Time to interruption as a function of overload power
for range: 0.68 R  Rn  560 R
This graph is based on measured data under constant voltage
conditions; the data may deviate according to the applications.
Revision: 24-Jun-13
0.4
0.8
P (W)
1.2
Ø 0.6 mm FeCu-leads
PR01 Hot-spot temperature rise (T) as a function
of dissipated power.
Document Number: 28729
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
APPLICATION INFORMATION
100
200
∆T
(K)
∆T
(K)
80
160
60
120
15 mm
40
80
20 mm
25 mm
20
40
0
0
0
0.4
0.8
0
P (W) 1.2
Ø 0.6 mm FeCu-leads
Minimum distance from resistor body to PCB = 1 mm
0.8
1.6
P (W)
2.4
Ø 0.8 mm Cu-leads
PR01 Temperature rise (T) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
PR02 Hot-spot temperature rise (T) as a function
of dissipated power.
240
100
ΔT
(K)
∆T
(K)
200
80
15 mm
160
60
20 mm
120
25 mm
40
80
20
40
0
0
1
0
2
P (W)
Ø 0.8 mm Cu-leads
Minimum distance from resistor body to PCB = 1 mm
0
0.8
1.6
P (W)
2.4
Ø 0.6 mm FeCu-leads
PR02 Temperature rise (T) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
PR02 Hot-spot temperature rise (T) as a function
of dissipated power.
240
100
ΔT
(K)
∆T
(K)
200
80
160
15 mm
60
120
20 mm
40
80
25 mm
20
40
0
0
0
1
P (W)
2
Ø 0.6 mm FeCu-leads
Minimum distance from resistor body to PCB = 1 mm
PR02 Temperature rise (T) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
Revision: 24-Jun-13
0
1
P (W)
2
Ø 0.8 mm FeCu-leads
PR02 Hot-spot temperature rise (T) as a function
of dissipated power.
Document Number: 28729
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
APPLICATION INFORMATION
100
200
∆T
(K)
∆T
(K)
80
160
15 mm
20 mm
60
120
25 mm
40
80
20
40
0
0
0
0.8
1.6
P (W)
2.4
Ø 0.8 mm FeCu-leads
Minimum distance from resistor body to PCB = 1 mm
0
1
2
P (W)
3
Ø 0.8 mm Cu-leads
PR02 Temperature rise (T) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
PR03 Hot-spot temperature rise (T) as a function
of dissipated power.
240
100
ΔT
(K)
∆T
(K)
80
15 mm
200
20 mm
160
60
120
25 mm
40
80
20
40
0
0
1
2
P (W)
0
3
Ø 0.8 mm Cu-leads
Minimum distance from resistor body to PCB = 1 mm
0
1
2
P (W)
3
Ø 0.6 mm FeCu-leads
PR03 Temperature rise (T) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
100
PR03 Hot-spot temperature rise (T) as a function
of dissipated power.
240
ΔT
(K)
∆T
(K)
200
80
10 mm
160
60
15 mm
120
20 mm
40
80
25 mm
20
40
0
0
0
1
2
P (W)
3
Ø 0.6 mm FeCu-leads
Minimum distance from resistor body to PCB = 1 mm
PR03 Temperature rise (T) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
Revision: 24-Jun-13
0
1
2
P (W)
3
Ø 0.8 mm FeCu-leads
PR03 Hot-spot temperature rise (T) as a function
of dissipated power.
Document Number: 28729
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
APPLICATION INFORMATION
100
∆T
(K)
80
15 mm
60
20 mm
40
20
0
0
0.8
1.6
2.4
P (W) 3.2
Ø 0.8 mm FeCu-leads
Minimum distance from resistor body to PCB = 1 mm
PR03 Temperature rise (T) at the lead end (soldering point) as a function of dissipated power at various lead lengths after mounting.
10 2
Z
R
Rn = 1 Ω
10
R n = 24 Ω
1
Rn = 12 kΩ
10 -1
10 -2
Rn = 100 kΩ
10 -1
1
10
10 2
f (MHz)
10 3
PR01 Impedance as a function of applied frequency
10 2
Z
R
R n = 1.2 Ω
10
R n = 10 Ω
1
Rn = 22 kΩ
10 -1
Rn = 124 kΩ
10 -2
10 -1
1
10
10 2
f (MHz)
10 3
PR02 Impedance as a function of applied frequency
Revision: 24-Jun-13
Document Number: 28729
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
APPLICATION INFORMATION
10 2
Z
R
Rn = 1.5 Ω
10
R n = 18 Ω
1
Rn = 1.3 kΩ
10 -1
Rn = 20 kΩ
R n = 100 kΩ
10 -2
1
10 2
10
f (MHz)
10 3
PR03 Impedance as a function of applied frequency
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with
IEC 60115-1 specification, category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days).
The tests are carried out in accordance with IEC 60068-2-xx
Test Method under standard atmospheric conditions
according to IEC 60068-1, 5.3.
In the Test Procedures and Requirements table, tests
and requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given. In
some instances deviations from the IEC recommendations
were necessary for our method of specifying.
All soldering tests are performed with mildly activated flux.
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2TEST
METHOD
4.4.1
4.4.2
TEST
PROCEDURE
REQUIREMENTS
Visual examination
No holes; clean surface; no damage
Dimensions (outline)
Gauge (mm)
See Straight and Kinked Dimensions
tables Applied voltage (+ 0 %/- 10 %):
R< 10 : 0.1 V
Resistance
(refer note on first
page for measuring
distance)
4.5
10   R < 100 : 0.3 V
100   R < 1 k: 1 V
1 k  R < 10 k: 3 V
R - Rnom: max. ± 5 %
10 k  R < 100 k: 10 V
100 k  R < 1 M: 25 V
R = 1 M: 50 V
4.18
20 (Tb)
Resistance to
soldering heat
4.29
45 (Xa)
Component solvent
resistance
Isopropyl alcohol or H2O
followed by brushing
No visual damage
4.17
20 (Ta)
Solderability
2 s; 235 °C; Solder bath method; SnPb40
3 s; 245 °C; Solder bath method; SnAg3Cu0.5
Good tinning ( 95 % covered);
no damage
Solderability
(after ageing)
8 h steam or 16 h 155 °C;
leads immersed 6 mm:
for 2 s at 235 °C; solder bath (SnPb40)
for 3 s at 245 °C; solder bath (SnAg3Cu0.5)
Good tinning ( 95 % covered);
no damage
Revision: 24-Jun-13
Thermal shock: 10 s; 260 °C; 3 mm from body
Rmax.: ± (1 % R + 0.05 )
Document Number: 28729
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2TEST
METHOD
TEST
PROCEDURE
REQUIREMENTS
4.7
Voltage proof on
insulation
Maximum voltage URMS = 500 V
during 1 min; metal block method
No breakdown or flashover
4.16
Robustness of
terminations:
4.16.2
21 (Ua1)
Tensile all samples
Load 10 N; 10 s
Number of failures:
< 1 x 10-6
4.16.3
21 (Ub)
Bending half
number of samples
Load 5 N; 4 x 90°
Number of failures:
< 1 x 10-6
4.16.4
21 (Uc)
Torsion other half
of samples
3 x 360° in opposite directions
No damage
Rmax.: ± (0.5 % R + 0.05 )
4.20
29 (Eb)
Bump
3 x 1500 bumps in three directions; 40 g
No damage
Rmax.: ± (0.5 % R + 0.05 )
4.22
6 (Fc)
Vibration
Frequency 10 Hz to 500 Hz;
displacement 1.5 mm or acceleration 10 g;
three directions; total 6 h (3 x 2 h)
No damage
Rmax.: ± (0.5 % R + 0.05 )
4.19
14 (Na)
Rapid change of
temperature
30 min at LCT and
30 min at UCT; 5 cycles
No visual damage
PR01: Rmax.: ± (1 % R + 0.05 
PR02: Rmax.: ± (1 % R + 0.05 
PR03: Rmax.: ± (2 % R + 0.05 
4.23
Climatic sequence:
4.23.2
2 (Ba)
Dry heat
16 h; 155 °C
4.23.3
30 (Db)
Damp heat
(accelerated)
1st cycle
24 h; 55 °C; 90 % to 100 % RH
4.23.4
1 (Aa)
Cold
2 h; - 55 °C
4.23.5
13 (M)
Low air pressure
2 h; 8.5 kPa; 15 °C to 35 °C
4.23.6
30 (Db)
Damp heat
(accelerated)
remaining cycles
5 days; 55 °C; 95 % to 100 % RH
Rins min.: 103 M
Rmax.: ± (1.5 % R + 0.1 )
4.24
78 (Cab)
Damp heat
(steady state)
56 days; 40 °C; 90 % to 95 % RH;
loaded with 0.01 P70 (Steps: 0 V to 100 V)
Rins min.: 1000 M
Rmax.: ± (3 % R + 0.1 )
Endurance
(at 70 °C)
1000 h; loaded with P70 or Umax.;
1.5 h ON and 0.5 h OFF
Rmax.: ± (5 % R + 0.1 )
Temperature
coefficient
Between - 55 °C and + 155 °C
 ± 250 ppm/K
Insulation resistance
Maximum voltage (DC) after 1 min;
metal block method
Rins min.: 104 M
4.25.1
4.8
4.6.1.1
Revision: 24-Jun-13
Document Number: 28729
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR01/02/03
www.vishay.com
Vishay BCcomponents
12NC INFORMATION FOR HISTORICAL CODING REFERENCE
Last Digit of 12NC Indicating Resistance Decade
The resistors have a 12-digit numeric code starting with 23
For 5 % tolerance:
RESISTANCE DECADE
• The next 7 digits indicate the resistor type and packing
LAST DIGIT
0.22  to 0.91 
7
1  to 9.76 
8
• The remaining 3 digits indicate the resistance value:
- The first 2 digits indicate the resistance value
10  to 97.6 
9
- The last digit indicates the resistance decade
100  to 976 
1
For 1 % tolerance:
• The next 6 digits indicate the resistor type and packing
• The remaining 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value
1  to 9.76 k
2
10  to 97.6 k
3
100 to 976 k
4
1 M
5
12NC Example
- The last digit indicates the resistance decade
The 12NC for resistor type PR02 with Cu leads and a value
of 750  with 5 % tolerance, supplied on a bandolier of
1000 units in ammopack, is: 2306 198 53751.
12NC - Resistor Type and Packaging (1)
TYPE
PR01
PR02
LEAD Ø
mm
Cu 0.6
Cu 0.8
FeCu 0.6
PR03
Cu 0.8
FeCu 0.6
TOL.
(%)
RADIAL TAPED
3000 UNITS
-
23.. ... ..... (BANDOLIER)
AMMOPACK
STRAIGHT LEADS
52 mm
52 mm
63 mm
5000 UNITS 1000 UNITS
500 UNITS
22 196 1....
06 191 2....
-
52 mm
5000 UNITS
06 191 5....
REEL
RADIAL TAPED
1
4000 UNITS
-
2000 UNITS
-
5
06 197 03...
-
22 193 14...
06 197 53...
-
06 197 23...
-
1
-
22 197 2....
-
22 197 1....
-
06 192 5....
2322 197 5....
5
-
06 198 03...
-
06 198 53...
-
06 198 23...
2322 198 04...
5
-
-
-
22 194 54...
-
-
-
5
-
-
-
-
22 195 14...
-
-
1
-
-
-
-
06 199 6...
-
-
5
-
-
-
-
22 195 54...
-
-
Notes
• Preferred types in bold.
(1) Other packaging versions are available on request.
12NC - Resistor Type and Packaging
23.. ... ..... (LOOSE IN BOX)
TYPE
PR01
PR02
PR03
LEAD Ø
mm
TOL.
(%)
Cu 0.6
5
FeCu 0.6
5
DOUBLE KINK
PITCH (2)(3)(4)
PITCH = 17.8 mm
PITCH = 25.4 mm
1000 UNITS
500 UNITS
1000 UNITS
22 193 03...
-
-
-
22 193 43...
-
22 193 53... (2)
-
500 UNITS
Cu 0.8
5
22 194 23...
-
-
-
FeCu 0.6
5
22 194 83...
-
-
-
FeCu 0.8
5
-
-
22 194 63... (3)
-
Cu 0.8
5
-
22 195 23...
-
-
FeCu 0.6
5
-
22 195 83...
-
-
FeCu 0.8
5
-
-
-
22 195 63... (4)
Notes
• Preferred types in bold.
(2) PR01 pitch 12.5 mm.
(3) PR02 pitch 15.0 mm.
(4) PR03 pitch 20.0 mm, with reversed kinking direction as opposed to the drawing for the type with double kink figure.
Revision: 24-Jun-13
Document Number: 28729
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000