CEL PS9213-V-A

PHOTOCOUPLER
PS9213
1 Mbps, OPEN COLLECTOR OUTPUT
HIGH CMR, INTELLIGENT POWER MODULE
5-PIN SOP PHOTOCOUPLER
−NEPOC Series−
FOR CREEPAGE DISTANCE OF 5.5 mm
DESCRIPTION
The PS9213 is an optically coupled isolator containing a GaAlAs LED on the input side and a photo diode and a
signal processing circuit on the output side on one chip.
The PS9213 is designed specifically for high common mode transient immunity (CMR) and low pulse width
distortion with operating temperature. It is suitable for IPM drive.
FEATURES
• Long creepage distance (5.5 mm MIN.)
• High common mode transient immunity (CMH, CML = ±15 kV/µs MIN.)
PIN CONNECTION
• High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
(Top View)
• Maximum propagation delays (tPLH − tPHL = 270 ns TYP.)
• Pulse width distortion ( tPHL − tPLH = 270 ns TYP.)
5
4
3
1. Anode
2. Cathode
3. GND
4. VO
5. VCC
• Ordering number of taping product: PS9213-F3, F4: 2 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (Option)
1
2
TRUTH TABLE
APPLICATIONS
• IPM Driver
LED
Output
• General purpose inverter
ON
L
OFF
H
Document No. PN10535EJ02V0DS (2nd edition)
Date Published June 2005 CP(K)
The mark  shows major revised points.
PS9213
PACKAGE DIMENSIONS (UNIT: mm)
5.6 +0.3
–0.1
4.4±0.25
1.33±0.2
7.0±0.2
0.5±0.3
1.27
0.4±0.05
0.15 +0.10
–0.05
0.1
2.5±0.1
2.6±0.1
5.193±0.2
5.83±0.2
0.25 M
MARKING EXAMPLE
PS9213
NL444
Assembly Lot
No. 1 pin Mark
N L
4 44
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code (L:Pb-Free)
Rank Code
2
Data Sheet PN10535EJ02V0DS
PS9213
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Packing Style
Specification
PS9213
PS9213-A
Pb-Free
PS9213-F3
PS9213-F3-A
PS9213-F4
PS9213-F4-A
PS9213-V
Safety Standard
Application Part
Approval
Number
20 pcs (Tape 20 pcs cut)
Standard products
Embossed Tape 2 500 pcs/reel
(UL approved)
PS9213-V-A
20 pcs (Tape 20 pcs cut)
DIN EN60747-5-2
PS9213-V-F3
PS9213-V-F3-A
Embossed Tape 2 500 pcs/reel
(VDE0884 Part2)
PS9213-V-F4
PS9213-V-F4-A
*1
PS9213
approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
IF
25
mA
Reverse Voltage
VR
5
V
Supply Voltage
VCC
−0.5 to +35
V
Output Voltage
VO
−0.5 to +35
V
Output Current
IO
15
mA
PC
100
mW
BV
2 500
Vr.m.s.
Operating Ambient Temperature
TA
−40 to +100
°C
Storage Temperature
Tstg
−55 to +125
°C
Diode
Detector
Forward Current
*1
Power Dissipation
Isolation Voltage
*2
*3
*1 Reduced to 0.33 mA/°C at TA = 70°C or more.
*2 Reduced to 1.9 mW/°C at TA = 70°C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
MIN.
High Level Input Current
IFH
Output Voltage
TYP.
MAX.
Unit
10
20
mA
VO
0
30
V
Supply Voltage
VCC
4.5
30
V
LED Off Voltage
VF
0
0.8
V
15
Data Sheet PN10535EJ02V0DS
3
PS9213
ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 V, unless otherwise specified)
Parameter
Diode
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA
Reverse Current
IR
VR = 3 V
Terminal Capacitance
Ct
V = 0 V, f = 1 MHz, TA = 25°C
*1
MIN.
TYP.
1.3
1.65
MAX.
Unit
2.1
V
200
µA
30
pF
Detector Low Level Output Voltage
VOL
IF = 10 mA, IOL = 2.4 mA
0.13
0.6
V
High Level Output Current
IOH
VCC = VO = 30 V, VF = 0.8 V
0.01
50
µA
High Level Supply Current
ICCH
VCC = 30 V, VF = 0.8 V, VO = open
0.6
1.3
mA
Low Level Supply Current
ICCL
VCC = 30 V, IF = 10 mA, VO = open
0.6
1.3
mA
IFHL
VO = 0.8 V, IO = 0.75 mA
1.5
5.0
mA
CTR
IF = 10 mA, VO = 0.6 V
Coupled Threshold Input Current
(H → L)
Current Transfer Ratio (IC/IF)
Isolation Resistance
RI-O
VI-O = 1 kVDC, RH = 40 to 60%,
44
10
110
%
Ω
11
T = 25°C
A
Isolation Capacitance
CI-O
Propagation Delay Time
tPHL
(H → L)
*2
VI-O = 0 V, f = 1 MHz, TA = 25°C
1.5
pF
IF = 10mA, RL = 20 kΩ, CL = 100 pF,
250
500
520
750
270
650
270
650
ns
VTHHL = 1.5 V, VTHLH = 2.0 V
Propagation Delay Time
tPLH
(L → H)
*2
Maximum Propagation
tPLH−tPHL
−200
Delays
Pulse Width Distortion
tPHL-tPLH
*2
(PWD)
Common Mode
CMH
Level Output
*3
Common Mode
Transient Immunity at Low
Level Output
4
*3
TA = 25°C, IF = 0 mA, VO > 3.0 V,
15
kV/µs
15
kV/µs
VCM = 1.5 kV, RL = 20 kΩ,
Transient Immunity at High
CL = 100 pF
CML
TA = 25°C, IF = 10 mA, VO < 1.0 V,
VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
Data Sheet PN10535EJ02V0DS
PS9213
*1 Typical values at TA = 25°C.
*2 Test circuit for propagation delay time
0.1 µ F
(PW = 10 µ s,
Duty cycle = 1/10)
Input
(Monitor)
IF (ON)
50% IF (ON)
Input
VCC = 15 V
Pulse input (IF = 10 mA)
RL = 20 kΩ
VO (Monitor)
CL = 100 pF
15 V
Output
VTHLH = 2.0 V
47 Ω
VTHHL = 1.5 V
tPHL
VOL
tPLH
Remark CL includes probe and stray wiring capacitance.
*3 Test circuit for common mode transient immunity
1.5 kV
VCM 90%
SW IF
0.1 µ F
B
A
VCC = 15 V
RL = 20 kΩ
VO (Monitor)
CL = 100 pF
10%
0V
tr
VO
(Switch A: IF = 0 mA)
VO
(Switch B: IF = 10 mA)
VCM
tf
15 V
3.0 V
1.0 V
VOL
Remark CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
Data Sheet PN10535EJ02V0DS
5
PS9213
TYPICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
150
Detector Power Dissipation PC (mW)
Maximum Forward Current IF (mA)
40
30
20
10
0
20
40
60
80
100
40
60
80
Ambient Temperature TA (˚C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
100
1 200
10
TA = +85˚C
+50˚C
+25˚C
0˚C
–25˚C
1
0.1
0.01
1.0
1.2
1.4
1.6
1.8
2.0
2.2
VCC = 30 V,
VO = Open,
ICCH : VF = 0.8 V,
ICCL : IF = 10 mA
1 000
800
ICCL
600
ICCH
400
200
0
–50
2.4
–25
0
25
50
75
100
Forward Voltage VF (V)
Ambient Temperature TA (˚C)
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
0.6
VCC = 15 V,
VO = 0.8 V,
IO = 0.75 mA
4
3
2
1
0
–50
–25
0
25
50
75
100
Low Level Output Voltage VOL (V)
5
VCC = 15 V,
IF = 10 mA,
IO = 2.4 mA
0.5
0.4
0.3
0.2
0.1
0
–50
Ambient Temperature TA (˚C)
–25
0
25
50
75
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
6
20
Ambient Temperature TA (˚C)
High Level Supply Current ICCH (µA),
Low Level Supply Current ICCL (µA)
Forward Current IF (mA)
50
0
100
Threshold Input Current IFHL (mA)
100
Data Sheet PN10535EJ02V0DS
100
PS9213
OUTPUT CURRENT vs.
AMBIENT TEMPERATURE
OUTPUT CURRENT vs. FORWARD CURRENT
14
1.10
Output Current (Relative Value)
VO = 0.6 V
10
TA = +25˚C
8
+100˚C
6
–40˚C
4
2
Propagation Delay Time tPHL, tPLH (ns),
Pulse Width Distortion tPHL – tPLH (ns)
5
10
15
0.80
0.75
–20
0
20
40
60
80
100
Ambient Temperature TA (˚C)
tPLH
400
tPHL
300
tPLH – tPHL
100
0
0
5
10
15
20
IF = 10 mA,
CL = 100 pF,
RL = 20 kΩ
1 400
1 200
1 000
800
600
tPLH
400
tPHL
200
0
–200
0
tPLH – tPHL
10
20
30
40
Supply Voltage VCC (V)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
PROPAGATION DELAY TIME vs.
LOAD CAPACITANCE
600
tPLH
400
tPHL
PWD
IF = 10 mA,
VCC = 15 V,
CL = 100 pF,
RL = 20 kΩ
100
0
–40
1 800
1 600
Forward Current IF (mA)
700
200
0.85
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. SUPPLY VOLTAGE
500
300
0.90
Forward Current IF (mA)
VCC = 15 V,
600 CL = 100 pF,
RL = 20 kΩ
500
0.95
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. FORWARD CURRENT
700
200
1.00
0.70
–40
20
Propagation Delay Time tPHL, tPLH (ns),
Maximum Propagation Delays tPLH – tPHL (ns)
Propagation Delay Time tPHL, tPLH (ns),
Maximum Propagation Delays tPLH – tPHL (ns)
0
0
–20
0
20
40
60
80
Propagation Delay Time tPHL, tPLH (ns)
Output Current IO (mA)
12
IF = 10 mA,
1.05 VO = 0.6 V
1 600
IF = 10 mA,
1 400 VCC = 15 V,
RL = 20 kΩ
1 200
tPLH
1 000
800
600
tPHL
400
200
100
Ambient Temperature TA (˚C)
0
0
100
200
300
400
500
Load Capacitance CL (pF)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10535EJ02V0DS
7
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
1 000
tPLH
IF = 10 mA,
VCC = 15 V,
800
CL = 100 pF
600
tPLH – tPHL
400
tPHL
200
0
–200
0
10
20
30
40
50
Propagation Delay Time tPHL, tPLH (ns),
Maximum Propagation Delays tPLH – tPHL (ns)
Propagation Delay Time tPHL, tPLH (ns),
Maximum Propagation Delays tPLH – tPHL (ns)
PS9213
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
500
IF = 10 mA,
450 VCC = 5 V,
400 CL = 15 pF
350
tPLH – tPHL
300
250
200
150
tPHL
100
50
Load Resistance RL (kΩ)
0
0
5
10
15
Load Resistance RL (kΩ)
Remark The graphs indicate nominal characteristics.
8
tPLH
Data Sheet PN10535EJ02V0DS
20
25
PS9213
TAPING SPECIFICATIONS (UNIT: mm)
1.55±0.5
7.4±0.1
5.5±0.05
1.5+0.1
–0
12.0±0.2
2.0±0.05
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
3.05 MAX.
2.85±0.1
6.0±0.1
0.3
8.0±0.1
Tape Direction
PS9213-F4
PS9213-F3
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
φ 100±1.0
21.0±0.8
φ 13.0±0.2
R 1.0
φ 330±2.0
13.0±0.2
13.5±1.0
17.5±1.0
Packing: 2 500 pcs/reel
Data Sheet PN10535EJ02V0DS
11.9 to 15.4
Outer edge of
flange
9
PS9213
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.27
0.8
1.45
5.5
10
Data Sheet PN10535EJ02V0DS
PS9213
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature)
350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
Data Sheet PN10535EJ02V0DS
11
PS9213
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
12
Data Sheet PN10535EJ02V0DS
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.