PHOTOCOUPLER PS9117A HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP (SO-5) −NEPOC HIGH-SPEED PHOTOCOUPLER Series− DESCRIPTION The PS9117A is an optically coupled high-speed, active low type isolator containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9117A is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion. The PS9117A is suitable for high density application. FEATURES • Pulse width distortion (⏐tPHL − tPLH⏐ = 35 ns MAX.) • High common mode transient immunity (CMH, CML = ±15 kV/μs MIN.) • Small package (SO-5) PIN CONNECTION (Top View) • High-speed (10 Mbps) 5 4 3 • High isolation voltage (BV = 3 750 Vr.m.s.) 1. Anode 2. Cathode 3. GND 4. VO 5. VCC • Open collector output • Ordering number of taping product: PS9117A-F3: 2 500 pcs/reel • Pb-Free product • Safety standards 1 • UL approved: File No. E72422 2 • DIN EN60747-5-2 (VDE0884 Part2) approved No. 40008902 (Option) • CSA approved: File No. 2115283 (CA 101391) TRUTH TABLE APPLICATIONS • Measurement equipment LED Output • PDP ON L • FA Network OFF H Document No. PN10646EJ04V0DS (4th edition) Date Published July 2008 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2006, 2008 PS9117A PACKAGE DIMENSIONS (UNIT: mm) 3.4 5 +0.3 –0.1 4 3 7.0±0.3 4.4 2 2.6±0.2 0.15 +0.10 –0.05 1 0.1±0.1 <R> 0.5±0.3 1.27 0.4 +0.10 –0.05 0.25 M MARKING EXAMPLE SnBi PLATING Ni/Pd/Au PLATING 117A N831 No. 1 pin Mark Initial of NEC (Engraved mark) N No. 1 pin Mark Initial of NEC (Engraved mark) *1 N 117A N831 Type Number Assembly Lot 8 31 *1 2 Bar : Pb-Free N N Week Assembled Year Assembled (Last 1 Digit) Rank Code Type Number Assembly Lot *1 8 31 Week Assembled Year Assembled (Last 1 Digit) Rank Code *1 Bar : Pb-Free Data Sheet PN10646EJ04V0DS PS9117A <R> ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Specification Safety Standards Application Approval Part Number PS9117A PS9117A-A Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9117A-F3 PS9117A-F3-A (SnBi) Embossed Tape 2 500 pcs/reel (UL approved) PS9117A-V PS9117A-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS9117A-V-F3 PS9117A-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2) *1 PS9117A approved (Option) PS9117A PS9117A-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9117A-F3 PS9117A-F3-AX (Ni/Pd/Au) Embossed Tape 2 500 pcs/reel (UL approved) PS9117A-V PS9117A-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS9117A-V-F3 PS9117A-V-F3-AX Embossed Tape 2 500 pcs/reel (VDE0884 Part2) approved (Option) *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit IF 30 mA Reverse Voltage VR 5 V Supply Voltage VCC 7 V Output Voltage VO 7 V Output Current IO 25 mA PC 40 mW BV 3 750 Vr.m.s. Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −55 to +125 °C Diode Detector Forward Current *1 Power Dissipation Isolation Voltage *2 *3 *1 Reduced to 0.3 mA/°C at TA = 25°C or more. *2 Applies to output pin VO (collector pin). Reduced to 1.5 mW/°C at TA = 65°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. Low Level Input Voltage VFL 0 High Level Input Current IFH 6.3 Supply Voltage VCC 4.5 TTL (RL = 1 kΩ, loads) N Pull-up Resistor RL TYP. MAX. Unit 0.8 V 10 12.5 mA 5.0 5.5 V 5 330 4k Data Sheet PN10646EJ04V0DS Ω 3 PS9117A ELECTRICAL CHARACTERISTICS (TA = −40 to +85°C, unless otherwise specified) Parameter Diode Symbol MIN. *1 Unit 1.8 V 10 μA IF = 10 mA, TA = 25°C Reverse Current IR VR = 3 V, TA = 25°C Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25°C 30 IOH VCC = VO = 5.5 V, VF = 0.8 V 1 100 μA VOL VCC = 5.5 V, IF = 5 mA, IOL = 13 mA 0.2 0.6 V High Level Supply Current ICCH VCC = 5.5 V, IF = 0 mA, VO = open 4 7 mA Low Level Supply Current ICCL VCC = 5.5 V, IF = 10 mA, VO = open 6 10 IFHL VCC = 5 V, VO = 0.8 V, RL = 350 Ω 2 5 RI-O VI-O = 1 kVDC, RH = 40 to 60%, Low Level Output Voltage Coupled Threshold Input Current 1.65 MAX. VF *2 1.4 TYP. Forward Voltage Detector High Level Output Current <R> Conditions pF (H → L) Isolation Resistance Ω 11 10 TA = 25°C Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.6 Propagation Delay Time tPHL TA = 25°C 40 (H → L) *3 pF 75 ns 100 Propagation Delay Time tPLH TA = 25°C 45 (L → H) *3 75 100 Rise Time tr VCC = 5 V, RL = 350 Ω, IF = 7.5 mA, 20 Fall Time tf VTHHL = VTHLH = 1.5 V 5 Pulse Width Distortion ⏐tPHL-tPLH⏐ 5 35 *3 (PWD) Propagation Delay Skew tPSK Common Mode CMH Transient Immunity at Low 4 15 20 kV/μs 15 20 kV/μs *4 Common Mode Level Output VCC = 5 V, RL = 350 Ω, TA = 25°C, IF = 0 mA, VO > 2 V, VCM = 1 kV Transient Immunity at High Level Output 40 CML VCC = 5 V, RL = 350 Ω, TA = 25°C, IF = 7.5 mA, VO < 0.8 V, VCM = 1 kV *4 Data Sheet PN10646EJ04V0DS PS9117A *1 Typical values at TA = 25°C *2 Because VOL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time (IF = 7.5 mA) 50% Input VCC = 5 V Pulse input (IF) 0.1 μ F (PW = 1 μ s, Duty cycle = 1/10) Input (monitor) RL = 350 Ω VO (monitor) CL = 15 pF 47 Ω Output tPHL 1.5 V VOL tPLH Remark CL includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity SW 1 kV VCM 90% IF VCC = 5 V 0.1 μ F 10% RL = 350 Ω VO (monitor) CL = 15 pF 0V tr VO (IF = 0 mA) VCM VO (IF = 7.5 mA) tf VOH 2V 0.8 V VOL Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10646EJ04V0DS 5 PS9117A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 50 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 40 30 20 10 0 20 40 80 85 60 100 40 80 85 60 SUPPLY CURRENT vs. AMBIENT TEMPERATURE 100 12 TA = +85˚C +50˚C +25˚C 0˚C –25˚C 1 0.1 1.2 1.4 1.6 1.8 2.0 2.2 10 8 ICCL (IF = 10 mA) 6 ICCH (IF = 0 mA) 4 2 0 –50 2.4 –25 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (˚C) OUTPUT VOLTAGE vs. FORWARD CURRENT LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 0.6 Low Level Output Voltage VOL (V) VCC = 5.0 V 5 RL = 350 Ω 1.0 kΩ 4 4.0 kΩ, 4.7 kΩ 3 2 1 1 2 3 4 5 6 IF = 5.0 mA, VCC = 5.5 V 0.5 0.4 IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA 0.3 0.2 0.1 0 –50 Forward Current IF (mA) –25 0 25 50 75 Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. 6 20 FORWARD CURRENT vs. FORWARD VOLTAGE High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) Forward Current IF (mA) 10 Ambient Temperature TA (˚C) 6 Output Voltage VO (V) 20 Ambient Temperature TA (˚C) 10 0 30 0 100 0.01 1.0 40 Data Sheet PN10646EJ04V0DS 100 PS9117A PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE 100 Propagation Delay Time tPHL, tPLH (ns) Threshold Input Current IFHL (mA) 5 VCC = 5.0 V, VO = 0.6 V 4 RL = 350 Ω 3 1.0 kΩ 2 4.0 kΩ 1 0 –50 –25 0 25 50 75 tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ 40 20 tPLH: RL = 350 Ω tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ –25 0 25 50 75 PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE PROPAGATION DELAY TIME vs. FORWARD CURRENT 100 100 IF = 7.5 mA, VCC = 5.0 V 40 30 RL = 4.0 kΩ 20 RL = 1.0 kΩ 10 RL = 350 Ω –25 0 25 50 75 100 Propagation Delay Time tPHL, tPLH (ns) Pulse Width Distortion tPHL–tPLH (ns) 60 Ambient Temperature TA (˚C) RL = 4.7 kΩ 0 –50 tPLH: RL = 4.7 kΩ Ambient Temperature TA (˚C) 60 50 80 0 –50 100 IF = 7.5 mA, VCC = 5.0 V VCC = 5.0 V tPLH: RL = 4.7 kΩ 80 60 tPLH: RL = 1.0 kΩ tPLH: RL = 4.0 kΩ 40 tPLH: RL = 350 Ω 20 0 5 Ambient Temperature TA (˚C) tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ 7 9 11 13 15 Forward Current IF (mA) Remark The graphs indicate nominal characteristics. Data Sheet PN10646EJ04V0DS 7 PS9117A TAPING SPECIFICATIONS (UNIT: mm) 1.55±0.1 7.4±0.1 5.5±0.1 1.5+0.1 –0 12.0±0.2 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 3.9±0.1 8.0±0.1 3.45 MAX. 3.0±0.1 0.3±0.05 Tape Direction PS9117A-F3 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 100±1.0 21.0±0.8 φ 13.0±0.2 R 1.0 φ 330±2.0 13.0±0.2 13.5±1.0 17.5±1.0 Packing: 2 500 pcs/reel 8 Data Sheet PN10646EJ04V0DS 11.9 to 15.4 Outer edge of flange PS9117A RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 0.8 1.45 1.27 <R> 5.5 Data Sheet PN10646EJ04V0DS 9 PS9117A NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C 10 Data Sheet PN10646EJ04V0DS PS9117A (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10646EJ04V0DS 11 PS9117A <R> SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Speck Unit Application classification (DIN EN 60664-1 VDE0110 Part 1) for rated line voltages ≤ 300 Vr.m.s. IV for rated line voltages ≤ 600 Vr.m.s. III Climatic test class (DIN EN 60664-1 VDE0110) 40/85/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 707 Vpeak Upr 1 061 Vpeak Upr 1 326 Vpeak UTR 6 000 Vpeak Upr = 1.5 × UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Clearance distance >4.2 mm Creepage distance >4.2 mm Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg –55 to +125 °C Operating temperature range TA –40 to +85 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C Ris MIN. 10 12 Ω VIO = 500 V dc at TA MAX. at least 100°C Ris MIN. 10 11 Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 150 °C Current (input current IF, Psi = 0) Isi 200 mA Power (output or total power dissipation) Psi 300 mW Ris MIN. 10 Isolation resistance VIO = 500 V dc at TA = Tsi 12 Data Sheet PN10646EJ04V0DS 9 Ω PS9117A • The information in this document is current as of July, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10646EJ04V0DS 13 PS9117A Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.