PHOTOCOUPLER PS8802-1,-2 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER −NEPOC Series− DESCRIPTION The PS8802-1, -2 are optically coupled isolators containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. The PS8802-1, -2 are designed specifically for high common mode transient immunity (CMR), the PS8802-2 is suitable for high density applications. FEATURES • 40% reduction of mounting area (5-pin SOP × 2) PIN CONNECTION • High common mode transient immunity (CMH, CML = ±10 kV/µs MIN.) (Top View) • High supply voltage (VCC = 35 V) • High isolation voltage (BV = 2 500 Vr.m.s.) 8 7 1 2 PS8802-1 5 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 3 4 8 7 6 1 2 • High-speed response (tPHL = 0.8 µs MAX., tPLH = 1.2 µs MAX.) • Ordering number of tape product: PS8802-1-F3, F4: 1 500 pcs/reel : PS8802-2-F3, F4: 1 500 pcs/reel • Pb-Free product • Safety standards • UL approved: File No. E72422 • DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (option) APPLICATIONS • Computer and peripheral manufactures • General purpose inverter • Substitutions for relays and pulse transformers • Power supply Document No. PN10418EJ04V0DS (4th edition) Date Published November 2004 CP(K) The mark shows major revised points. 6 PS8802-2 5 1. Anode1 2. Cathode1 3. Cathode2 4. Anode2 5. GND 6. VO2 7. VO1 8. VCC 3 4 PS8802-1,-2 PACKAGE DIMENSIONS (UNIT: mm) 5.21±0.25 6.0±0.2 0.1±0.1 0.15 +0.10 –0.05 3.27±0.2 3.95±0.1 0.5±0.3 1.27 0.4 +0.10 –0.05 0.10 S 0.25 M MARKING EXAMPLE PS8802-1 PS8802-2 8802-1 NL251 8802-2 NL251 Assembly Lot N N N L 2 51 No. 1 pin Mark Initial of NEC (Engraved mark) N L 2 51 Week Assembled Year Assembled (Last 1 Digit) No. 1 pin Mark Initial of NEC (Engraved mark) In-house Code (L: Pb-Free) Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code 2 Assembly Lot Rank Code Data Sheet PN10418EJ04V0DS PS8802-1,-2 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free*2 Packing Style Safety Standard Approval 20 pcs (Tape 20 pcs cut) Standard products Embossed Tape 1 500 pcs/reel (UL approved) PS8802-1 PS8802-1-A PS8802-1-F3 PS8802-1-F3-A PS8802-1-F4 PS8802-1-F4-A PS8802-2 PS8802-2-A 20 pcs (Tape 20 pcs cut) PS8802-2-F3 PS8802-2-F3-A Embossed Tape 1 500 pcs/reel PS8802-2-F4 PS8802-2-F4-A PS8802-1-V PS8802-1-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS8802-1-V-F3 PS8802-1-V-F3-A Embossed Tape 1 500 pcs/reel (VDE0884 Part2) PS8802-1-V-F4 PS8802-1-V-F4-A PS8802-2-V PS8802-2-V-A 20 pcs (Tape 20 pcs cut) PS8802-2-V-F3 PS8802-2-V-F3-A Embossed Tape 1 500 pcs/reel PS8802-2-V-F4 PS8802-2-V-F4-A Application Part Number*1 PS8802-1 PS8802-2 PS8802-1 Approved (Option) PS8802-2 *1 For the application of the Safety Standard, following part number should be used. *2 With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Data Sheet PN10418EJ04V0DS 3 PS8802-1,-2 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit IF 25 mA/ch VR 5.0 V/ch Power Dissipation PD 45 mW/ch Supply Voltage VCC 35 V Output Voltage VO 35 V/ch IO 8.0 mA/ch PC 100 mW/ch Isolation Voltage BV 2 500 Vr.m.s. Operating Ambient Temperature TA –55 to +100 °C Storage Temperature Tstg –55 to +125 °C Diode Forward Current Reverse Voltage *1 Detector Output Current *2 Power Dissipation *3 *1 Reduced to 0.45 mW/°C at TA = 25°C or more. *2 Reduced to 1.00 mW/°C at TA = 25°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. 4 Data Sheet PN10418EJ04V0DS PS8802-1,-2 ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) Parameter Diode Conditions Forward Voltage VF IF = 16 mA Reverse Current IR VR = 3 V Forward Voltage Temperature Coefficient Terminal Capacitance Detector Symbol ∆VF/∆TA Ct MIN. 2.2 V 10 µA 30 pF 10 IF = 0 mA, VCC = VO = 5.5 V High Level Output Current IOH (2) IF = 0 mA, VCC = VO = 30 V Low Level Output Voltage VOL IF = 16 mA, VCC = 4.5 V, IOL = 1.2 mA High Level Supply Current (PS8802-1) ICCH IF = 0 mA, VO = open, VCC = 30 V IF = 16 mA, VO = open, VCC = 30 V 500 nA 100 µA 0.1 0.4 V 0.1 2 µA 0.2 4 100 Low Level Supply Current (PS8802-2) Current Transfer Ratio 1.7 V = 0 V, f = 1 MHz High Level Supply Current (PS8802-2) Coupled Unit mV/°C IOH (1) ICCL MAX. −2.1 IF = 16 mA High Level Output Current Low Level Supply Current (PS8802-1) TYP. 200 CTR IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 15 25 45 Input-Output Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60% 10 Insulation Resistance (Input-Input), (PS8802-2) RI-I VI-I = 1 kVDC, RH = 40 to 60% 1010 Input-Output Isolation Capacitance CI-O V = 0 V, f = 1 MHz Insulation Capacitance (Input-Input), (PS8802-2) CI-I Propagation Delay Time (H → L)*1 tPHL Propagation Delay Time (L → H)*1 tPLH Common Mode Transient Immunity at High Level Output*2 CMH IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ, VCM = 1.5 kV 10 Common Mode Transient Immunity at Low Level Output*2 CML IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ, VCM = 1.5 kV −10 % Ω 11 0.6 pF 0.3 IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ, CL = 15 pF Data Sheet PN10418EJ04V0DS 0.3 0.8 0.6 1.2 µs kV/µs 5 PS8802-1,-2 *1 Test circuit for propagation delay time VCC = 5 V PS8802-1 (PW = 1µs, Pulse input (IF) Duty cycle = 1/10) Input (Monitor) 47 Ω 0.1 µ F RL = 2.2 kΩ VO (Monitor) CL = 15 pF (IF = 7.5 mA) 50% Input Output VCC = 5 V PS8802-2 Pulse input (IF) (PW = 1µs, Duty cycle = 1/10) Input (Monitor) tPHL 1.5 V VOL tPLH RL = 2.2 kΩ VO (Monitor) 0.1 µF CL = 15 pF 47 Ω Remark CL is approximately 15 pF which includes probe and stray wiring capacitance. *2 Test circuit for common mode transient immunity PS8802-1 VCC = 5 V RL = 4.1 kΩ 0.1 µF VO (Monitor) CL = 15 pF 1.5 kV VCM 90% IF 10% VCM 0V tr VO (IF = 0 mA) PS8802-2 SW IF VCC = 5 V RL = 4.1 kΩ 0.1 µF VO (Monitor) CL = 15 pF VO (IF = 16 mA) tf VOH 2V 0.8 V VOL VCM USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. 6 Data Sheet PN10418EJ04V0DS PS8802-1,-2 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 40 30 20 10 25 0 50 75 60 40 20 25 50 75 100 Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE High Level Output Current IOH (nA) Forward Current IF (mA) 80 10 000 TA = +100˚C +50˚C +25˚C 1 0˚C –25˚C 0.1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 IF = 0 mA 1 000 100 10 1 0.1 –25 2.4 VCC = VO = 30 V VCC = VO = 5.5 V 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (˚C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 80 Current Transfer Ratio CTR (%) 100 Ambient Temperature TA (˚C) 100 10 120 0 100 VCC = 4.5 V, VO = 0.4 V 70 60 50 40 30 20 10 0 0.5 1 5 10 50 Normalized Current Transfer Raio CTR Diode Power Dissipation PD (mW) 50 1.6 1.2 1.0 0.8 0.6 0.4 0.2 0.0 –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Forward Current IF (mA) Remark Normalized to 1.0 at TA = 25˚C, IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 1.4 The graphs indicate nominal characteristics. Data Sheet PN10418EJ04V0DS 7 PS8802-1,-2 OUTPUT VOLTAGE vs. FORWARD CURRENT OUTPUT CURRENT vs. OUTPUT VOLTAGE 10 6 25 mA 5 Output Voltage VO (V) Output Current IO (mA) 20 mA 8 15 mA 6 10 mA 4 IF = 5 mA 2 4 RL = 2.2 kΩ 3 2 1 5.6 kΩ 2 4 6 8 10 12 14 16 0 18 20 6 8 10 12 14 16 18 20 PROPAGATION DELAY TIME vs. FORWARD CURRENT PROPAGATION DELAY TIME vs. LOAD RESISTANCE 3.0 VCC = 5 V, RL = 2.2 kΩ , CTR : 25% 2.0 1.0 tPHL tPLH 5 10 15 20 25 10 1 tPHL 0.1 1k 5 Normalized to 1.0 at TA = 25˚C, IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ 3 2 tPLH tPHL 1 0 –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Remark 10 k Load Resistance RL (Ω) NORMALIZED PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 4 VCC = 5 V, IF = 16 mA, CTR : 25% tPLH Forward Current IF (mA) Normalized Propagation Delay Time tPHL, tPLH 4 Forward Current IF (mA) 0 8 2 Output Voltage VO (V) Propagation Delay Time tPHL, tPLH (µs) Propagation Delay Time tPHL, tPLH (µs) 0 The graphs indicate nominal characteristics. Data Sheet PN10418EJ04V0DS 100 k PS8802-1,-2 TAPING SPECIFICATIONS (UNIT: mm) 1.7±0.1 5.56±0.1 5.5±0.1 1.5+0.1 –0 12.0±0.2 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.05 MAX. 3.6±0.1 6.4±0.1 0.3±0.05 8.0±0.1 Taping Direction PS8802-1-F4 PS8802-2-F4 PS8802-1-F3 PS8802-2-F3 Outline and Dimensions (Reel) 2.0±0.5 φ 13.0±0.2 φ 21.0±0.8 φ 100±1.0 R 1.0 φ 330±2.0 2.0±0.5 φ13.0±0.2 13.5±1.0 17.5±1.0 11.9 to 15.4 Outer edge of flange Packing: 1 500 pcs/reel Data Sheet PN10418EJ04V0DS 9 PS8802-1,-2 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.27 0.8 1.45 5.25 10 Data Sheet PN10418EJ04V0DS PS8802-1,-2 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. Data Sheet PN10418EJ04V0DS 11 PS8802-1,-2 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10418EJ04V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.