DATA SHEET PHOTOCOUPLER PS9613,PS9613L 1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE −NEPOC Series− 8-PIN DIP PHOTOCOUPLER TM DESCRIPTION The PS9613 and PS9613L are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9613 is in a plastic DIP (Dual In-line Package) and the PS9613L is lead bending type (Gull-wing) for surface mounting. FEATURES • High instantaneous common mode rejection voltage (CMH, CML = ±15 kV/µs MIN.) • High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.) • Maximum propagation delays (tPLH − tPHL = 270 ns TYP.) • Pulse width distortion ( | tPHL − tPLH | = 270 ns TYP.) • Ordering number of taping product: PS9613L-E3, E4: 1 000 pcs/reel • UL approved: File No. E72422 (S) • VDE0884 approved (Option) APPLICATIONS • IPM Driver • General purpose inverter The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P13981EJ2V0DS00 (2nd edition) Date Published May 2000 NS CP(K) Printed in Japan © 1998, 2000 PS9613,PS9613L PACKAGE DIMENSIONS (in millimeters) PS9613 TOP VIEW 10.16 MAX. 8 7 6 5 1 2 3 4 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 7.62 3.8 MAX. 0.65 2.8 MIN. 4.55 MAX. 6.5 0 to 15˚ 0.5±0.1 2.54 0.25 M 1.25±0.15 PS9613L TOP VIEW 8 7 6 5 1 2 3 4 3.8 MAX. 6.5 0.9±0.25 1.25±0.15 0.25 M 2 2.54 9.60±0.4 Data Sheet P13981EJ2V0DS00 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 0.05 to 0.2 10.16 MAX. PS9613,PS9613L FUNCTIONAL DIAGRAM 8 2 6 3 5 Shield LED Output ON L OFF H Data Sheet P13981EJ2V0DS00 3 PS9613,PS9613L ORDERING INFORMATION Part Number PS9613 Package 8-pin DIP Safety Standards Approval Packing Style Magazine case 50 pcs UL approved PS9613L Application Part *1 Number PS9613 PS9613L PS9613L-E3 Embossed Tape 1 000 pcs/reel PS9613L-E4 PS9613-V Magazine case 50 pcs VDE0884 approved PS9613L-V PS9613L PS9613L-V-E3 Embossed Tape 1 000 pcs/reel PS9613L-V-E4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current IF 25 mA Reverse Voltage VR 3.0 V Supply Voltage VCC −0.5 to +35 V Output Voltage VO −0.5 to +35 V Output Current IO 15 mA Power Dissipation PC 100 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA −40 to +100 °C Storage Temperature Tstg −55 to +125 °C Diode Detector Isolation Voltage *1 *1 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. MAX. Unit Forward Current IF 10 20 mA Output Voltage VO 0 30 V Supply Voltage VCC 4.5 30 V LED Off Voltage VF 0 0.8 V 4 PS9613 TYP. Data Sheet P13981EJ2V0DS00 PS9613,PS9613L ELECTRICAL CHARACTERISTICS (TA = −40 to +100 °C, VCC = 15 V, unless otherwise specified) Parameter Diode Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 3 V Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25 °C MIN. 1.3 TYP. *1 1.65 MAX. Unit 2.1 V 200 µA 30 pF Detector Low Level Output Voltage VOL IF = 10 mA, VCC = 5 V, IO = 2.4 mA 0.13 0.6 V High Level Output Current IOH VCC = 30 V, VF = 0.8 V 1.0 50 µA High Level Supply Current ICCH VCC = 30 V, VF = 0.8 V, VO = open 0.6 1.3 mA Low Level Supply Current ICCL VCC = 30 V, IF = 10 mA, VO = open 0.6 1.3 mA IFHL VO = 0.8 V, IO = 0.75 mA 1.5 5.0 mA CTR IF = 10 mA, VO = 0.6 V Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60 %, TA = 25 °C Isolation Capacitance Coupled Threshold Input Current (H → L) Current Transfer Ratio (IC/IF) 44 110 % Ω 11 10 CI-O V = 0 V, f = 1 MHz, TA = 25 °C 0.6 Propagation Delay Time *2 (H → L) tPHL IF = 10mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V 250 500 Propagation Delay Time *2 (L → H) tPLH 520 750 270 650 270 650 Maximum Propagation Delays tPLH−tPHL Pulse Width Distortion *2 (PWD) |tPHL−tPLH| Instantaneous Common Mode Rejection Voltage *3 (Output: High) CMH Instantaneous Common Mode Rejection Voltage *3 (Output: Low) CML −200 TA = 25 °C, IF = 0 mA, VO > 3.0 V, VCM = 1.5 kV, RL = 20 kΩ, CL = 100 pF TA = 25 °C, IF = 10 mA, VO < 1.0 V, VCM = 1.5 kV, RL = 20 kΩ, CL = 100 pF Data Sheet P13981EJ2V0DS00 pF ns 15 kV/µs 15 kV/µs 5 PS9613,PS9613L *1 Typical values at TA = 25 °C. *2 Test circuit for propagation delay time VCC = 15 V Pulse input (IF = 10 mA) IF (ON) 50 % IF (ON) Input (PW = 10 µ s, Duty cycle = 1/10) 0.1 µ F RL = 20 kΩ 15 V Input (monitor) 47 Ω VO (Monitor) Output CL = 100 pF VTHHL = 1.5 V GND VTHLH = 2.0 V tPHL VOL tPLH CL is approximately which includes probe and stray wiring capacitance. *3 Test circuit for common mode transient immunity VCC = 15 V 0.1 µ F B 1.5 kV VCM 90 % GL SW IF 10 % RL = 20 kΩ 0V tr A VO (monitor) VO CL = 100 pF (Switch A: IF = 0 mA) GND VO (Switch B: IF = 10 mA) tf VOH 3.0 V 1.0 V VOL CL is approximately which includes probe and stray wiring capacitance. USAGE CAUTION By-pass capacitor of more than 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 6 Data Sheet P13981EJ2V0DS00 PS9613,PS9613L TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 40 30 20 10 0 20 40 60 80 100 20 40 60 80 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE SUPPLY CURRENT vs. AMBIENT TEMPERATURE 100 1 200 High Level Supply Current ICCH (µA), Low Level Supply Current ICCL (µA) Forward Current IF (mA) 50 0 100 10 TA = +85 ˚C +50 ˚C +25 ˚C 0 ˚C –25 ˚C 1 0.1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 VCC = 30 V, VO = Open, ICCH : VF = 0.8 V, ICCL : IF = 10 mA 1 000 800 ICCL 600 ICCH 400 200 0 –50 2.4 –25 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (˚C) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 0.6 VCC = 15 V, VO = 0.8 V, IO = 0.75 mA 4 3 2 1 0 –50 –25 0 25 50 75 100 Low Level Output Voltage VOL (V) 5 Threshold Input Current IFHL (mA) 100 VCC = 15 V, IF = 10 mA, IO = 2.4 mA 0.5 0.4 0.3 0.2 0.1 0 –50 Ambient Temperature TA (˚C) –25 0 25 50 75 100 Ambient Temperature TA (˚C) Data Sheet P13981EJ2V0DS00 7 PS9613,PS9613L OUTPUT CURRENT vs. AMBIENT TEMPERATURE OUTPUT CURRENT vs. FORWARD CURRENT 14 1.10 Output Current (Relative Value) VO = 0.6 V 10 TA = +25 ˚C 8 +100 ˚C 6 –40 ˚C 4 2 Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL – tPLH (ns) 5 10 15 0.80 0.75 400 tPHL 300 tPLH – tPHL 100 0 0 5 10 15 20 0 20 40 60 80 100 1 800 IF = 10 mA, CL = 100 pF, RL = 20 kΩ 1 600 1 400 1 200 1 000 800 600 tPLH 400 tPHL 200 0 –200 0 tPLH – tPHL 10 20 30 40 Forward Current IF (mA) Supply Voltage VCC (V) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE PROPAGATION DELAY TIME vs. LOAD CAPACITANCE 700 600 tPLH 400 tPHL PWD IF = 10 mA, VCC = 15 V, CL = 100 pF, RL = 20 kΩ 100 0 –40 –20 0 20 40 60 80 1 600 IF = 10 mA, 1 400 VCC = 15 V, RL = 20 kΩ 1 200 tPLH 1 000 800 600 tPHL 400 200 100 Ambient Temperature TA (˚C) 8 –20 Ambient Temperature TA (˚C) tPLH 200 0.85 PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. SUPPLY VOLTAGE 500 300 0.90 Forward Current IF (mA) VCC = 15 V, 600 CL = 100 pF, RL = 20 kΩ 500 0.95 PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT 700 200 1.00 0.70 –40 20 Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) 0 0 Propagation Delay Time tPHL, tPLH (ns) Output Current IO (mA) 12 IF = 10 mA, 1.05 VO = 0.6 V 0 0 100 200 300 400 Load Capacitance CL (pF) Data Sheet P13981EJ2V0DS00 500 PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE 1 000 tPLH IF = 10 mA, VCC = 15 V, 800 CL = 100 pF 600 tPLH – tPHL 400 tPHL 200 0 –200 0 10 20 30 40 50 Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) PS9613,PS9613L PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE 500 IF = 10 mA, 450 VCC = 5 V, 400 CL = 15 pF tPLH 350 tPLH – tPHL 300 250 200 150 tPHL 100 50 Load Resistance RL (kΩ) 0 0 5 10 15 20 25 Load Resistance RL (kΩ) Remark The graphs indicate nominal characteristics. Data Sheet P13981EJ2V0DS00 9 PS9613,PS9613L TAPING SPECIFICATIONS (in millimeters) 4.3±0.2 10.3±0.1 7.5±0.1 1.55±0.1 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 10.4±0.1 1.55±0.1 12.0±0.1 Tape Direction PS9613L-E3 PS9613L-E4 Outline and Dimensions (Tape) 1.5 R 1.0 φ 21.0±0.8 φ 80.0±5.0 φ 330 2.0±0.5 φ 13.0±0.5 16.4 +2.0 –0.0 Packing: 1 000 pcs/reel 10 Data Sheet P13981EJ2V0DS00 PS9613,PS9613L RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 °C or below (package surface temperature) • Time of temperature higher than 210 °C 30 seconds or less • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature 260 °C or below (molten solder temperature) • Time 10 seconds or less • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet P13981EJ2V0DS00 11 PS9613,PS9613L [MEMO] 12 Data Sheet P13981EJ2V0DS00 PS9613,PS9613L [MEMO] Data Sheet P13981EJ2V0DS00 13 PS9613,PS9613L [MEMO] 14 Data Sheet P13981EJ2V0DS00 PS9613,PS9613L CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. Data Sheet P13981EJ2V0DS00 15 PS9613,PS9613L NEPOC is a trademark of NEC Corporation. • The information in this document is current as of May, 2000. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4