PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Configuration & Dimensions Series PSB0503 PSB5028 PSB6013 PSB6025 PSB8040 PSB8058 Dimensions [mm] A 5.20±0.20 5.20±0.20 6.20±0.30 6.20±0.30 8.00±0.30 8.00±0.30 B 5.20±0.20 5.20±0.20 6.50±0.30 6.50±0.30 8.00±0.30 8.00±0.30 C 2.80±0.20 2.80±0.20 1.40±0.20 2.50±0.30 3.80±0.30 5.80±0.30 D(typ.) 1.70 1.70 2.15 2.15 2.40 2.40 E(typ.) 1.80 1.80 2.20 2.20 3.20 3.20 F(typ.) 3.90 3.90 4.90 4.90 6.40 6.40 G(ref.) 2.00 2.00 2.40 2.40 3.40 3.40 H(ref.) 3.70 3.70 4.90 4.90 6.20 6.20 I(ref.) 1.10 1.10 1.10 1.10 1.40 1.40 2. Schematic Diagram 3. Materials a.- Core : Ferrite DR core b.- Core : Ferrite RI core c.- Wire : Enamelled copper wire (class F) d.- Terminal : Ag / Ni / Sn e.- Adhesive : Epoxy resin f.- Remark : Lead content 200ppm max. include ferrite 1 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 4. General Specification 30ºC typ. (PSB6025) a.- Temp. rise 40ºC typ. (PSB0503, PSB5028, PSB6013, PSB8040, PSB8058) b.- Rated current : Base on temp. rise & ∆L/L0A = 35% typ. c.- Storage temp. : -40ºC ~ +125ºC d.- Operating temp. : -40ºC ~ +105ºC e.- Resistance to solder heat : 260ºC. 10 secs 5. Electrical Characteristics PSB0503 (1.2µH – 100µH) DWG No. Inductance (µH) Q ref. PSB0503 – 1R2N PSB0503 – 2R2N PSB0503 – 3R3N PSB0503 – 4R7N PSB0503 – 6R8N 1.2±30% 2.2±30% 3.3±30% 4.7±30% 6.8±30% PSB0503 – 100N PSB0503 – 150N PSB0503 – 220N PSB0503 – 330N PSB0503 – 470N PSB0503 – 680N PSB0503 – 101N Test Freq. RDC (mΩ) typ. max. SRF (MHz) typ. Irms (mA) typ. Isat (mA) typ. 10.0 10.0 10.0 9.0 10.0 L (KHz) 100 100 100 100 100 Q (MHz) 7.96 7.96 7.96 7.96 7.96 16.8 21.0 24.0 32.0 42.0 22.0 27.0 32.0 45.0 56.0 200 130 90 50 55 3500 3200 2800 2200 2000 3400 2500 2100 1850 1550 10.0±30% 15.0±30% 22.0±30% 33.0±30% 18.0 18.0 15.0 15.0 100 100 100 100 2.52 2.52 2.52 2.52 63.0 108.0 162.0 203.0 85.0 140.0 210.0 260.0 25 23 18 16 1800 1100 950 800 1400 1000 850 680 47.0±30% 68.0±30% 100.0±30% 13.0 13.0 15.0 100 100 100 2.52 2.52 0.796 285.0 450.0 625.0 360.0 550.0 800.0 13 10 8 700 560 470 620 460 420 2 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSB5028 (4.7µH – 220µH) DWG No. Inductance (µH) Q ref. PSB5028 – 4R7N PSB5028 – 6R8N PSB5028 – 100N 4.7±30% 6.8±30% 10.0±30% PSB5028 – 150N PSB5028 – 220N PSB5028 – 330N PSB5028 – 470N PSB5028 – 680N PSB5028 – 101N PSB5028 – 151N PSB5028 – 221N Test Freq. RDC (mΩ) typ. max. SRF (MHz) typ. Irms (mA) typ. Isat (mA) typ. 8.0 7.2 10.5 L (KHz) 100 100 100 Q (MHz) 7.96 7.96 2.52 24.0 28.0 46.5 35.0 38.0 60.0 70 45 35 2500 2200 1800 1500 1200 950 15.0±30% 22.0±30% 33.0±30% 47.0±30% 20.0 17.0 18.0 13.0 100 100 100 100 2.52 2.52 2.52 2.52 63.0 105.0 150.0 195.0 82.0 132.0 195.0 250.0 30 20 15 14 1500 1150 960 830 800 680 600 450 68.0±30% 100.0±30% 150.0±30% 220.0±30% 12.0 35.0 45.0 40.0 100 100 100 100 2.52 0.796 0.796 0.796 260.0 425.0 600.0 870.0 340.0 550.0 750.0 1085.0 10 10 8 6 750 520 480 360 330 300 280 240 PSB6013 (1µH – 68µH) DWG No. Inductance (µH) Q ref. PSB6013 – 1R0N PSB6013 – 1R5N PSB6013 – 2R2N PSB6013 – 3R3N PSB6013 – 4R2N PSB6013 – 6R4N 1.0±30% 1.5±30% 2.2±30% 3.3±30% 4.2±30% 6.4±30% PSB6013 – 100N PSB6013 – 150N PSB6013 – 220N PSB6013 – 330N PSB6013 – 470N PSB6013 – 680N Test Freq. 12 10 10 10 10 10 L (KHz) 100 100 100 100 100 100 Q (MHz) 7.96 7.96 7.96 7.96 7.96 7.96 10.0±30% 15.0±30% 22.0±30% 33.0±30% 14 12 12 10 100 100 100 100 47.0±30% 68.0±30% 10 10 100 100 RDC (mΩ) typ. max. SRF (MHz) typ. Irms (mA) typ. Isat (mA) typ. 28 32 40 45 58 85 36 40 50 60 75 110 100 90 80 70 55 45 3200 3000 2500 2350 2100 1700 2900 2400 2100 1750 1500 1300 2.52 2.52 2.52 2.52 132 180 260 400 165 235 325 500 35 26 22 18 1400 1100 950 780 1000 800 720 580 2.52 2.52 540 720 675 900 14 10 660 600 500 400 3 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSB6025 (1.2µH – 220µH) DWG No. Inductance (µH) Q ref. PSB6025 – 1R2N PSB6025 – 2R2N PSB6025 – 3R3N 1.2±30% 2.2±30% 3.3±30% PSB6025 – 4R7N PSB6025 – 6R8N PSB6025 – 8R2N PSB6025 – 100N PSB6025 – 150N PSB6025 – 220N PSB6025 – 330N PSB6025 – 470N PSB6025 – 680N PSB6025 – 101N PSB6025 – 151N PSB6025 – 221N Test Freq. RDC (mΩ) typ. max. SRF (MHz) typ. Irms (mA) typ. Isat (mA) typ. 8 8 8 L (KHz) 100 100 100 Q (MHz) 7.96 7.96 7.96 14.5 18.5 21.0 19 24 27 120 65 50 4000 3400 3200 3200 2350 2000 4.7±30% 6.8±30% 8.2±30% 10.0±30% 8 8 8 12 100 100 100 100 7.96 7.96 7.96 2.52 27.0 32.0 40.0 44.0 35 42 52 57 42 36 30 25 2700 2400 2200 2000 1550 1300 1250 1050 15.0±30% 22.0±30% 33.0±30% 47.0±30% 68.0±30% 100.0±30% 150.0±30% 220.0±30% 12 12 12 12 10 24 30 20 100 100 100 100 100 100 100 100 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 66.0 100.0 140.0 190.0 280.0 385.0 590.0 950.0 86 130 180 250 365 500 770 1250 22 18 12 10 8 7 5 4 1800 1600 1200 1000 800 700 540 420 920 700 640 480 400 350 280 240 SRF (MHz) typ. Irms (A) typ. Isat (A) typ. 40.0 32.0 28.0 20.0 18.0 15.0 12.0 10.0 8.0 6.0 5.0 6.00 5.30 4.20 3.70 2.80 2.20 1.90 1.55 1.35 1.05 0.90 5.00 4.60 4.00 2.90 2.50 2.05 1.75 1.45 1.10 0.92 0.77 PSB8040 (3.3µH – 150µH) DWG No. PSB8040 – 3R3N PSB8040 – 4R2N PSB8040 – 6R2N PSB8040 – 100N PSB8040 – 150N PSB8040 – 220N PSB8040 – 330N PSB8040 – 470N PSB8040 – 680N PSB8040 – 101N PSB8040 – 151N Inductance (µH) Q ref. 3.3±30% 4.2±30% 6.2±30% 10.0±30% 15.0±30% 22.0±30% 33.0±30% 47.0±30% 68.0±30% 100.0±30% 150.0±30% 12 12 10 22 20 22 22 20 18 25 18 Test Freq. L (KHz) 100 100 100 100 100 100 100 100 100 100 100 Q (MHz) 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 RDC (mΩ) typ. max. 13.8 16.5 25.0 33.0 55.0 88.0 115.0 150.0 205.0 325.0 445.0 18.0 22.0 32.0 42.0 70.0 110.0 150.0 190.0 260.0 410.0 560.0 4 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSB8058 (3.9µH – 100µH) DWG No. Inductance (µH) Q ref. PSB8058 – 3R9N PSB8058 – 5R2N PSB8058 – 6R8N 3.9±30% 5.2±30% 6.8±30% PSB8058 – 100N PSB8058 – 220N PSB8058 – 330N PSB8058 – 470N PSB8058 – 680N PSB8058 – 101N Test Freq. RDC (mΩ) typ. max. SRF (MHz) typ. Irms (A) typ. Isat (A) typ. 8 8 8 L (KHz) 100 100 100 Q (MHz) 7.96 7.96 7.96 12.0 14.0 16.0 16.0 17.5 20.0 45.0 35.0 30.0 6.50 5.80 5.50 4.50 3.90 4.00 10.0±30% 22.0±30% 33.0±30% 47.0±30% 20 20 16 12 100 100 100 100 2.52 2.52 2.52 2.52 18.6 42.0 58.0 80.0 25.0 52.0 72.0 100.0 18.0 14.0 10.0 7.0 4.60 3.40 2.70 2.30 3.00 1.80 1.60 1.50 68.0±30% 100.0±30% 16 22 100 100 2.52 0.796 100.0 124.0 130.0 160.0 6.0 5.0 2.00 1.70 1.20 0.90 [Inductance tested at 0.1V] [Irms base on temp. rise: 40ºC, 30ºC (PSB6025)] [Isat base on ∆L/L0A=35%] 6. Curve Inductance VS. DC Current Curve PSB0503 PSB5028 Inductance VS. IDC PSB6013 PSB6025 5 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com Inductance VS. DC Current Curve PSB8040 PSB8058 7. Packaging Information P Leader no component 200 mm min. 4mm Components Trailer no component 400 mm min. User direction of feed ( PSB0503, PSB5028, PSB6013, PSB6025 à P = 8mm) (PSB8040, PSB8058 à P = 20mm) 6 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSB0503, PSB5028, PSB6013 & PSB6025 Dimensions [mm] Style 07 – 12 A B C D G N 178 21±0.8 13 12 14+0 50-0 T PSB0503,PSB5028,PSB6025 PSB6013 16.5 18.4 PSB8040 & PSB8058 Dimensions [mm] Style A 330 13 – 16 Series PSB0503 PSB5028 PSB6013 PSB6025 PSB8040 PSB8058 B 21±0.8 C 13±0.5 D 16 G 18+0 Inner : Reel Q’TY(pcs) 600 600 1,000 600 1,200 800 G.W.(gw) 185 185 230 125 1,600 1,350 N 50-0 T 22.4 Outer : Carton Style 07 – 12 07 – 12 07 - 12 07 – 12 13 – 16 13 - 16 Q’TY(pcs) 24,000 32,000 40,000 24,000 7,200 4,800 G.W.(Kg) 8.4 8.4 8.5 7.5 12.1 10.5 Size(cm) 42 x 41 x 24 42 x 41 x 24 42 x 41 x 24 42 x 41 x 24 40 x 40 x 24 40 x 40 x 24 8. Labelling 7 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 9. Reliability Test Test item Specification More than 90% of the terminal electrode shall be covered with fresh solder Solderability Thermal shock test (Temp. cycle) Inductance shall not change more than ±30% Test condition Preheat : 150±25% for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5ºC Flux : Rosin Dip time : 4±1 seconds Room temp. 15 minutes -25±2ºC 30 minutes Room temp. 15 minutes 85±2ºC 30 minutes Total : 50 cycles Humidity Resistance test High temp. Resistance test Temperature : 40±2ºC Humidity : 90 ~ 95% Applied current : Per specifications Time : 500 hours Temperature : 105±2ºC Applied current : Per specifications Time : 500 hours 10. Edition Control Edition 1st Date 31/08/06 Change description Update Specification Made by Pablo Pozo 8 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSB0503 , PSB5028 , PSB6013 , PSB6025 , PSB8040 & PSB8058 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 9 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.