CATV Force Model 2804 • Request Pricing Optical Broadcast Systems • Download User Manual CATV Transmitter Transmits up to 110 channels over one single-mode fiber. VSB/AM transmission ensures compatibility with standard CATV modulators, processors, etc. The transmitter includes a 7-segment LED and other indicator LEDs that allow critical system parameters to be accurately monitored. Model 2804 Transmitter An integral -20 dB RF test point simplifies installation, commissioning, and troubleshooting. Key lock power switch prevents accidental power-down. Multiple laser output power options provide complete system design flexibility. Excellent for medium to large campus video distribution systems. The Force CATV Model 2804 110 Channel CATV Professional Distribution System (PDS) transmitter is part of a robust system for transferring up to 110 channels of VSB/AM modulated signals over a single-mode optical fiber. The system is also suitable for transferring 80 CATV channels along with 30 digital QAM channels in the upper frequency range. The Model 2804 provides 40-870 MHz of usable bandwidth for video signals stacked at 6 MHz intervals. A low loss single-mode fiber allows full channel loading to beyond 20 km while maintaining a good carrier-to-noise ratio. A key power lock ensures the transmitter cannot be accidentally turned off, and a blue 7-segment LED readout allows the user to monitor a number of system parameters. A -20 dB RF test point on the front panel provides a convenient avenue for installing, commissioning, and troubleshooting the transmitter. The Model 2804 may be used with the Model 2807 mini-node receiver for use in return path and multiple splitter applications or with the Model 2808 receiver for basic 110 channel CATV transmission. In all cases, the link provides excellent performance for many demanding applications such as broadband LANs, distance learning, and multiple data services. Model 2807 ® CATVLinx Rx CATV VSB/AM Video Out 110 CATV VSB/AM Video In To Internet or VOD Service Model 2804 ® CATVLinx Tx Model 1188Q Optical Splitter Head End Model 2802 ® CATVLinx Rx Return Path Model 2807 ® CATVLinx Rx CATV VSB/AM Video Out Model 2807 ® CATVLinx Rx w/ Return Path 825 Park Street, Christiansburg, VA 24073 • USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 •[email protected] • www.forceinc.com © 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved. Specifications and Ordering Information Electrical, Environmental, and Physical Characteristics* Optical Characteristics* Min Channel Loading Bandwidth (110 Ch) Operating Wavelength Required Fiber Bandwidth Input/Output Impedance Side Mode Suppression Ratio Back Reflection Tolerance CSO CTB Typ 40 1290 Max 110 870 1310 Units Min Power Supply Voltage Power Supply Frequency Power Dissipation Fuse Rating (Slow Blow) Operating Temp. Range Storage Temp Range Humidity Weight MHz 1330nm MHz Ohms dB -50 dB dB dB 2,000 75 30 -65 -69 Dimensions Typ 120 50 25 1.25 0 -20 0 Max 240 60 A +45 +70 % 90 5.5 2.5 19 x 1.72 x 14.1 483 x 44 x 358 Units VAC Hz Watts °C °C lbs. kg in. mm Drive Level per Video Carrier (dBmV/CH) 45 40 35 30 25 20 0 10 20 30 40 50 60 70 80 Total Number of Input Channels 90 100 110 Model 2804 Transmitter Front and Rear Views 110 Channel SM 1310 nm Transmitter P/N* Tx Options +6 dBm Opt. Output +8 dBm Opt. Output +10 dBm Opt. Output +12 dBm Opt. Output +13 dBm Opt. Output Tx, 1RU, SM, 1310 nm 2804TH-SCSP/06 2804TH-SCSP/08 2804TJ-SCSP/10 2804TK-SCSP/12 2804TL-SCSP/13 *System performance specifications indicated for use with 9/125 µm single-mode fiber. FC/APC optical connectors and other optical output powers are available for the transmitter. Please see IOM2804 for complete transmitter part numbers. The PDS transmitter is designed to operate with the Model 2807 and/or Model 2808 CATV receivers. See IOM2807 and IOM2808 for complete details. Rev. 1.3 01/17/05 Force Optical Broadcast Systems 825 Park Street, Christiansburg, VA 24073 USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 [email protected] • www.forceinc.com © 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved. CATV Force Model 2805 • Request Pricing Optical Broadcast Systems • Download User Manual CATV Transmitter Transmits up to 110 channels over one single-mode fiber. VSB/AM transmission ensures compatibility with standard CATV modulators, processors, etc. The transmitter includes status indicator LEDs that provide easy assessment of the link's performance. Excellent for structured in-building premise wiring video distribution. Model 2805 Transmitter High capacity backbone transport for multiple data services (RS-232, T1/E1, Ethernet, etc.) via CATV RF modem. CATV HFC distribution network, distance learning, CCTV video surveillance, campus video distribution, teleconferencing, and more. ® The Force CATVLinx Model 2805 110 Channel CATV Private Network Solution (PNS) transmitter is part of a robust system for transferring up to 110 channels of VSB/AM modulated signals over a single-mode optical fiber. The system provides 40-870 MHz of usable bandwidth for video signals stacked at 6 MHz intervals. A low loss single-mode optical fiber allows full channel loading to beyond 20 km while maintaining a good carrier-to-noise ratio. The Model 2805 may be used with the Model 2807 mininode receiver for use in return path and multiple splitter applications or with the Model 2808 receiver for basic 110 channel CATV transmission. In all cases, the link provides excellent performance for many demanding applications such as broadband LANs, distance learning, and multiple data services. Model 2808 ® CATVLinx Rx RF Amplifier Model 2808 ® CATVLinx Rx RF Amplifier Model 2808 ® CATVLinx Rx RF Amplifier Model 2808 ® CATVLinx Rx RF Amplifier Video Server Modulator Modulator RF Combiner Model 2805 ® CATVLinx Tx Model 1188Q Optical Splitter Local Cable Provider Head End 825 Park Street, Christiansburg, VA 24073 • USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 •[email protected] • www.forceinc.com © 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved. Specifications and Ordering Information Optical Characteristics* Min Channel Loading Bandwidth (77 Ch) Operating Wavelength Required Fiber Bandwidth Input/Output Impedance Side Mode Suppression Ratio Backreflection Tolerance CSO CTB Electrical, Environmental, and Physical Characteristics* Typ 40 1290 2,000 Max 110 870 1330 1310 Units Power Supply Voltage Power Supply Frequency Power Dissipation Fuse (Slow Blow) Operating Temp. Range Storage Temp. Range Humidity Weight MHz nm MHz Ohms dB dB dB dB 75 30 -50 -60 -65 Min 120 50 Typ Max 240 60 20 1.25 0 -20 0 Dimensions +45 +70 90 5.5 2.5 19 x 1.72 x 12.1 483 x 43.7 x 307 Units VAC Hz Watts A °C °C % lbs. kg in. mm 64 5 Ch. 10 Ch. 62 Carrier-to-Noise Ratio (dB) 60 24 Ch. 40 Ch. 77 Ch. 58 56 54 52 50 48 46 44 42 40 38 36 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 Receiver Optical Input (dBm) Model 2805 Private Network Solution (PNS) Transmitter Front and Rear Views 110 Channel SM 1310 nm Transmitter P/N Tx Options +8 dBm Opt. Output +10 dBm Opt. Output +12 dBm Opt. Output +13 dBm Opt. Output Tx, 1RU, SM, 1310 nm 2805TD-SCSP/08 2805TE-SCSP/10 2805Tf-SCSP/12 2805TG-SCSP/13 *System performance specifications indicated for use with 9/125 µm single-mode fiber. FC/APC optical connectors and other optical output powers are available for the transmitter. Please see IOM2805 for complete transmitter part numbers. The PNS transmitter is designed to operate with the Model 2807 and/or Model 2808 CATV receivers. See IOM2807 and IOM2808 for complete details. Rev. 1.3 01/17/05 Force Optical Broadcast Systems 825 Park Street, Christiansburg, VA 24073 USA (800) 732-5252 • TEL (540) 382-0462 • FAX (540) 381-0392 [email protected] • www.forceinc.com © 2005 by Force, Incorporated. Force, Incorporated reserves the right to make changes to the product described in this document in the interest of product improvement. All rights reserved.