SPECIFICATIONS FOR PG24064B-O Series 240 Column X 64 Row Graphic Liquid Crystal Display 03.06.07 Rev 0 PAGE 1 OF 13 Contents 1. Part Number Break Down 2. Precautions in use of LCD Modules 3. General Specification 4. Absolute Maximum Ratings 5. Electrical Characteristics 6. Optical Characteristics 7. Interface Pin Function 8. Power Supply 9. Contour Drawing & Block Diagram 10. Timing Characteristics 11. Table of T6963C Commands 12. Quality Assurance 13. Reliability PAGE 2 OF 13 1. Part Number Breakdown PAGE 3 OF 13 2. Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3)Don’t disassemble the LCM. (4)Don’t operate it above the absolute maximum rating. (5)Don’t drop, bend or twist LCM. (6)Soldering: only to the I/O terminals. (7)Storage: please storage in anti-static electricity container and clean environment. 3. General Specification Item Dimension Unit 240 x 64 － Module dimension(None Backlight ) 180.0 x 65.0 x 11.0（MAX） mm Module dimension(With Backlight ) 180.0 x 65.0 x 16.0（MAX） mm View area 132.2 x 39.2 mm Active area 127.16 x 33.88 mm Dot size 0.49 x 0.49 mm Dot pitch 0.53x 0.53 mm Number of Dots LCD type STN Duty 1/64 View direction 6 o’clock or 12 o’clock Backlight Type None, YELLOW-GREEN backlight, WHITE backlight PAGE 4 OF 13 4. Absolute Maximum Ratings Item Symbol Min Max Unit VI -0.3 VDD+0.3 V Supply Voltage For Logic VDD-VSS -0.3 7.0 V Supply Voltage For LCD VDD-V0 0 16 V Input Voltage Standard Operating Temp. Top 0 50 °C Temperature LCM Storage Temp. Tstr -10 60 °C Wide Temperature Operating Temp. Top -20 70 °C LCM Storage Temp. Tstr -30 80 °C 5. Electrical Characteristics Item Symbol Condition Min Typ Max Unit Supply Voltage For Logic VDD-VSS － 4.5 5.0 5.5 V Supply Voltage For LCD VDD-V0 Ta=25°C 12.0 12.5 13.2 V Input High Volt. VIH － 0.7 VDD － VDD V Input Low Volt. VIL － VSS － 0.3 VDD V Supply Current IDD VDD=5V 9.0 9.9 12.0 mA 3.8 4.2 4.3 V 2.8 3.1 3.3 V Supply Voltage of Yellow-green backlight Supply Voltage of White backlight Forward current =630 mA VLED Number of LED die 2x63= 126 Forward current =60 mA VLED Number of LED die 4 PAGE 5 OF 13 6. Optical Characteristics Item View Angle Symbol Condition Min Typ Max Unit (V)θ CR≥2 -20 － 35 deg (H)φ CR≥2 -30 － 30 deg CR － － 3 － － T rise － － － 250 ms T fall － － － 250 ms Contrast Ratio Response Time Definition of Operation Voltage (Vop) Intensity 100％ Definition of Response Time ( Tr , Tf ) Non-selected Conition Selected Wave Non-selected Wave Selected Conition Non-selected Conition Intensity 10％ Cr Max Cr = Lon / Loff Vop 90％ 100％ Tr Driving Voltage(V) [positive type] Tf [positive type] Conditions : Operating Voltage : Vop Viewing Angle(θ，φ) : 0°， 0° Frame Frequency : 64 HZ Driving Waveform : 1/N duty , 1/a bias Definition of viewing angle(CR≥2) θ f θ b φ = 180° θ l θ r φ = 90° φ = 270° φ = 0° PAGE 6 OF 13 7. Interface Pin Function Pin No. Symbol Level Description 1 FGND Frame GND 2 VSS 0V 3 VDD 5.0V 4 V0 5 /WR H/L Write Data into T6963C 6 /RD H/L Read Data from T6963C 7 /CS H/L Chip enable for T6963C 8 C/D H/L Command/Data 9 NC 10 /RST H/L Reset signal 11 DB0 H/L Data bit 0 12 DB1 H/L Data bit 1 13 DB2 H/L Data bit 2 14 DB3 H/L Data bit 3 15 DB4 H/L Data bit 4 16 DB5 H/L Data bit 5 17 DB6 H/L Data bit 6 18 DB7 H/L Data bit 7 19 FS H/L Pins for selection of font 20 NC Ground Supply Voltage for logic Supply voltage for LCD NC NC PAGE 7 OF 13 8. POWER SUPPLY Without Negative Power on PCB With Negative Power on PCB PAGE 8 OF 13 9. Contour Drawing &Block Diagram 180.0± 0.5 176.0 154.8 132.2[V.V.] 127.16[A.A.] 4.1 5.5 2.0 11.6 11.0[MAX.] 16.0[MAX.] 6.9± 0.5 10.9± 0.5 14.0 CL CL 20- 1.0 P2.54X9=22.86 65.0± 0.5 56.8 54.0 39.2[V.V.] 33.88[A.A.] CL 4.25 2.54 3- 1.0 CL 1.6± 0.1 1.6± 0.1 LCD PANEL 240 x 64 DOTS 64 ** 80 80 80 S6B2086 S6B2086 S6B2086 ** ** ** 0.53 0.53 S6B2086 ** T6963C 0.49 0.49 /WR /RD /CE C/D DB0 DB7 FS /RST VDD VSS V0 FGND 4-R1.75 2.5 5.08 SRAM 10.0 LED B/L NO B/L * OR EQUIVALENT 180.0± 0.5 176.0 154.8 132.2[V.V.] 127.16[A.A.] WHITE LED B/L 16.0[MAX.] 10.9± 0.5 65.0± 0.5 56.8 54.0 39.2[V.V.] 33.88[A.A.] CL 14.0 CL CL 4.25 2.54 3- 1.0 CL 5.08 4-R1.75 2.5 10.0 20- 1.0 P2.54X9=22.86 4.1 5.5 2.0 11.6 1.6± 0.1 PAGE 9 OF 13 10.Timing Characteristics PAGE 10 OF 13 11. Table of T6963C Commands PAGE 11 OF 13 12.Quality Assurance Screen Cosmetic Criteria Item Defect 1 Spots 2 Bubbles in Polarizer 3 Scratch 4 Allowable Density 5 Coloration Judgment Criterion A)Clear Size: d mm Acceptable Qty in active area d ≤0.1 Disregard 0.1<d≤0.2 6 0.2<d≤0.3 2 0.3<d 0 Note: Including pin holes and defective dots which must be within one pixel size. B)Unclear Size: d mm Acceptable Qty in active area d ≤0.2 Disregard 0.2<d≤0.5 6 0.5<d≤0.7 2 0.7<d 0 Size: d mm Acceptable Qty in active area d≤0.3 Disregard 0.3<d≤1.0 3 1.0<d≤1.5 1 1.5<d 0 In accordance with spots cosmetic criteria. When the light reflects on the panel surface, the scratches are not to be remarkable. Above defects should be separated more than 30mm each other. Not to be noticeable coloration in the viewing area of the LCD panels. Back-light type should be judged with back-light on state only. PAGE 12 OF 13 Partition Minor Minor Minor Minor Minor 13.Reliability Content of Reliability Test Environmental Test Test Item High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature/ Humidity Storage High Temperature/ Humidity Operation Temperature Cycle Content of Test Test Condition Applicable Standard Endurance test applying the high storage temperature for a long time. 60°C 96hrs —— Endurance test applying the high storage temperature for a long time. -10°C 96hrs —— Endurance test applying the electric stress (Voltage & Current) and the thermal stress to the element for a long time. 50°C 96hrs —— Endurance test applying the electric stress under low temperature for a long time. 0°C 96hrs —— Endurance test applying the high 60°C,90%RH temperature and high humidity storage for a 96hrs long time. Endurance test applying the electric stress (Voltage & Current) and temperature / humidity stress to the element for a long time. Endurance test applying the low and high temperature cycle. -10°C 25°C 60°C 30min 5min 1 cycle —— 50°C,90%RH 96hrs —— -10°C/60°C 10 cycles —— 30min Mechanical Test Vibration test Endurance test applying the vibration during transportation and using. Shock test Constructional and mechanical endurance test applying the shock during transportation. 10~22Hz→1.5mmp-p 22~500Hz→1.5G Total 0.5hrs 50G Half sign wave 11 msec 3 times of each direction —— —— ***Supply voltage for logic system=5V. Supply voltage for LCD system =Operating voltage at 25°C PAGE 13 OF 13