AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: REVISED: AGM1264R Series FEB 14, 2007 1.General Specifications 1. Features A. Drive Method: 1/64 Duty, 1/9 Bias B. The Module Operating Voltage: 3.3V; C. The LCD Operating Voltage : 9.7V; D. Viewing Direction: 6:00h E. Operating Temperature: F. Storage Temperature: G. Display mode: -20℃~70℃ -30℃~85℃ FSTN mode, positive type display 2. Characteristics of backlight (LED unit) Item Forward Voltage Forward Current Luminous Color Symbol VF IF LV Min. 2.85 Typ. 3.2 90 60 Max. 3.5 120 Unit V mA cd/m2 Condition IF=90mA IF=90mA BLUE WARNING: A BACKLIGHT IS A KIND OF CURRENT DEVICE,IT MUST CONNECT A RESISTANCE FOR LIMITING CURRENT ,OR IT WILL BE DAMAGED. 3. Mechanical Data: (1) Module Size ----------------------- 72.0 w * 90.0 h mm (2) Viewing 66.4 w * 39.4 h mm 0.45 w * 0.53 h mm (3) Dot Area ------------------- Size ---------------------- (4) Number of Dots ------------------ 128 * 64 Dots (5) Outline See Dimensions------------- Attached Drawing Page 1 4. Pin Pin No. Connections: Symbol LEVEL 1 P/S INPUT Function This is the parallel data input/serial data input switch terminal 2 C86 INPUT This is the MPU interface switch terminal 8 CAP2+ OUTPUT 9 CAP2- OUTPUT 10 CAP1- OUTPUT 11 CAP1+ OUTPUT 12 CAP3- OUTPUT This is a multi-level power supply for the liquid crystal drive VDD≥V1≥V2≥V3≥V4≥V5 DC/DC voltage converter capacitor 2 positive connection DC/DC voltage converter capacitor 2 negative connection DC/DC voltage converter capacitor 1 negative connection DC/DC voltage converter capacitor 1 positive connection DC/DC voltage converter capacitor 3 negative connection 13 VOUT OUTPUT DC/DC converter output 14 VSS 0V(GND) Groud 15 VDD +5V Power supply for logic 16-23 D7-D0 H/L Data bit 24 /RD(E) H/L Signal to select read and write 25 /WR(R/W) H/L Signal to select read and write Control/data select signal 3-7 V5-V1 INPUT 26 A0 H/L 27 /RES H,H-L 28 /CS1 H/L Reset signal Chip select signal Page 2 5.Timing Characteristics: Page 3 Page 4 Page 5 2.The Characteristics and The Reliability Test 1.Electro-Optic Characteristics: Condition:TEMP=(23±3)℃ Hum=(70±5)%RH Vdd: 5.0V NO Item Symbol Min Typ. Max Unit Condition 1 Supply Voltage(Logic) Vdd-Vss 3.0 3.3 10.1 3.6 V V -20℃ 9.7 V 25℃ 9.3 V 70℃ 60 316 ms ms 2 3 4 5 6 LCD Operating Voltage Ton Toff CR Response Time Contrast Viewing Angel Vdd-V0 3 12H θ1 45 6H θ2 55 3H θ3 50 Deg . θ4 Vth 50 7.78 V 9H LCD Threshold Voltage (CR≥3.0) 25℃ Page 6 3.Reliability Test No Items High TEMP Storage TEMP: 85±2℃ Time: 96h Restore:24h Low TEMP Storage TEMP: -30±3℃ Time: 96h Restore:24h High TEMP Operating TEMP:70±2℃ Vop: 5V Timp: 24h Restore:24h 1 2 3 Low TEMP Operating 4 5 Test Condition TEMP:-20±2℃ Vop: 5V Timp: 24h Restore:24h High TEMP High TEMP:40±2℃ Hum Storage Hum: 95%Rh Time: 96h Restore:24h Thermal Shock Equipment Test Result Tenny Passed Tenny Passed Tenny Passed Tenny Passed Tenny Passed TEMP:(℃) 85℃ 25℃ 6 Tenny -30℃ 30 5 30 5 Passed Min 5 Cycles Restore:24h P age 7 4.Instruction Sets P age 8 P age 9 5. Block Diagram LED+ LED- COM64 LCD PANEL CONTROLLER SEG0~SEG127 & DRIVER SEG127~SEG0 D0~D5 D6 D7 V1 V2 V3 V4 V5 A0 /WR(R/W) /RD(E) PS C86 /CS1 /RES VDD VSS VOUT CAP1+ CAP1CAP2+ CAP2CAP3- SEG128 LED LIGHT-BOX P age 10 6. Mechanical Outline P age 11