ETC QTLP630CYTR

SURFACE MOUNT LED LAMP
0805 Chip Type - Water Clear
PACKAGE DIMENSIONS
0.087 (2.2)
0.071 (1.8)
Red
Orange
Yellow
QTLP630C-R
QTLP630C-E
QTLP630C-Y
Water Clear
Water Clear
Water Clear
R0.008 (0.2)
0.057 (1.45)
0.041 (1.05)
FEATURES
TOP
CATHODE MARK
• Ultra-miniature and extremely low profile
0.012 (0.3)
2X
0.055 (1.4)
• Industrial standard footprint
• AlInGaP technology
• Wide viewing angle of 140°
0.047 (1.2)
0.041 (1.05)
• Water clear optics
0.024 (0.6)
• Available in 0.42” (12mm) width
SIDE
tape on 7” (178mm) diameter.
0.016 (0.4)
2X
• Moisture-proof packaging
0.047 (1.2)
DESCRIPTION
These surface mount lamps are designed to fit industry standard
profile and footprint for ultra-miniature chip type 0805. The low
profile and 140° viewing angle, moisture-proof packaging makes
this chip type LED ideal for panel illumination, push-button backlighting and membrane switch applications.
BOTTOM
NOTE:
Dimensions are in inches (mm).
ABSOLUTE MAXIMUM RATINGS
Parameter
Continuous Forward Current - IF
Peak Forward Current - IF
(f = 1.0 KHz, Duty Factor = 1/10)
(TA = 25°C unless otherwise specified)
Red
Orange
Yellow
QTLP630C-R
QTLP630C-E
QTLP630C-Y
30
30
20
mA
160
160
200
mA
Units
Reverse Voltage - VR (IR = 10 µA)
5
5
5
V
Power Dissipation - PD
85
100
100
mW
Operating Temperature - TOPR
-40 to +100
°C
Storage Temperature - TSTG
-40 to +100
°C
Wave
260 for 5 sec
°C
Reflow
260 for 10 sec
Lead Soldering Time - TSOL
1 of 5
3/10/00
300043A
SURFACE MOUNT LED LAMP
Round Top (1206) Chip Type - Water Clear
Red
Orange
Yellow
ELECTRICAL / OPTICAL CHARACTERISTICS
Part Number
QTLP630C-R
QTLP630C-E
QTLP630C-Y
Water Clear
Water Clear
Water Clear
(TA =25°C)
Red
Orange
Yellow
QTLP630C-R
QTLP630C-E
QTLP630C-Y
Condition
Luminous Intensity (mcd)
IF = 20mA
Minimum
15
20
25
Typical
30
40
50
2.4
2.8
2.8
Forward Voltage (V)
IF = 20mA
Maximum
Typical
Peak Wavelength (nm)
1.9
2.1
2.1
630
620
590
IF = 20mA
Spectral Line Half Width (nm)
20
18
15
IF = 20mA
Viewing Angle (°)
140
140
140
IF = 20mA
TYPICAL PERFORMANCE CURVES
100
2.5
RELATIVE LUMNOUS INTENSITY
(NORMALIZED AT 20 mA)
IF - FORWARD CURRENT (mA)
90
80
70
60
50
40
30
20
10
1.5
2.0
2.5
3.0
VF - FORWARD VOLTAGE (V)
Fig. 1 Forward Current vs. Forward Voltage
2 of 5
1.5
1.0
0.5
0.0
0
1.0
2.0
0
10
20
30
40
50
IF - DC FORWARD CURRENT (mA)
Fig. 2 Relative Luminous Intensity
vs. DC Forward Current
3/10/00
300043A
SURFACE MOUNT LED LAMP
Round Top (1206) Chip Type - Water Clear
Red
Orange
Yellow
QTLP630C-R
QTLP630C-E
QTLP630C-Y
Fig. 1 Forward Current vs. Forward Voltage
TYPICAL
PERFORMANCE CURVES
Water Clear
Water Clear
Water Clear
Fig. 2 Relative Luminous Intensity
vs. DC Forward Current
0˚
10˚
20˚
RELATIVE INTENSITY
1.0
YELLOW
ORANGE
30˚
RED
40˚
1.0
0.5
0.9
50˚
0.8
60˚
70˚
0.7
80˚
90˚
0
550
600
650
0.5
700
WAVELENGTH - nm
0.3
0.1
0.2
0.4
0.6
REL. LUMINOUS INTENSITY (%)
Fig. 4 Radiation Diagram
Fig. 3 Relative Intensity vs Peak Wavelength
IF - FORWARD CURRENT (mA)
50
40
RED, ORANGE
30
YELLOW
20
10
0
-25
0
25
50
75
80
100
AMBIENT TEMPERATURE TA (˚C)
Fig.5 Forward Current vs. Ambient Temperature
3 of 5
3/10/00
300043A
SURFACE MOUNT LED LAMP
Round Top (1206) Chip Type - Water Clear
Red
Orange
Yellow
QTLP630C-R
QTLP630C-E
QTLP630C-Y
Water Clear
Water Clear
Water Clear
RECOMMENDED PRINTED CIRCUIT BOARD PATTERN
0.043 (1.1)
0.049 (1.25)
0.049 (1.25)
0.043 (1.1)
RECOMMENDED IR REFLOW SOLDERING PROFILE
5 sec MAX
soldering time
240° C MAX
+5° C/s MAX
-5° C/s MAX
60 - 120 sec
Preheating
120 - 150° C MAX
4 of 5
3/10/00
300043A
SURFACE MOUNT LED LAMP
Round Top (1206) Chip Type - Water Clear
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
www.fairchildsemi.com
5 of 5
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
© 2000 Fairchild Semiconductor Corporation
3/10/00
300043A