High Power Resistive Products Resistors AVX introduces its line of High Power Resistive Products. All products are designed and manufactured at our ISO 9001 Facilities. All products are qualified as per MIL-PRF-55342. ELECTRICAL SPECIFICATIONS Resistance: 50 and 100 Ω standard (10 Ω - 200 Ω available) Resistance Tolerance: ±5% standard (±2% available) Power: 2 Watts through 250 Watts, 400 Watts, 800 Watts Operating Temperature Range: -55ºC to +150ºC Temperature Coefficient: < 150 ppm/ºC Low Capacitance MECHANICAL SPECIFICATIONS Package: Surface Mount Chips, Chips, Leaded Chips, Flanged Substrate Material: Aluminum Nitride Process: Thin Film Resistive Material: Tantalum Terminals: Silver Cover: Alumina Mounting Flange: 100% Cu, Ni or Ag Plated Mechanical Tolerance: ±0.13 (0.005) SMT and Chip products, supplied on Tape and Reel Non-Magnetic (exception RP4 and RP5 Style Surface Mount Resistors) RoHS Compliant POWER DERATING Power Dissipation 100% 80 60 Rated Safe Operating Range 40 20 0 -50˚C -25˚C 0˚C +25˚C +50˚C 75˚C 100˚C Heat Sink Temperature (°C) 4 125˚C 150˚C High Power Resistive Products Resistors SURFACE MOUNT CHIP RESISTORS – RP4 AND RP5 SERIES RP4 Series GENERAL SPECIFICATIONS Resistance: 50 and 100 Ω standard (contact factory for custom resistance values) Resistive Tolerance: ±2% standard Operating Temp Range: -55ºC to +150ºC Temperature Coefficient: <150 ppm/ºC Resistive Elements: Proprietary Thin Film Substrate Material: Aluminum Nitride Terminals: Silver over Nickel RoHS Compliant Reliability: MIL-PRF-55342 Tape and Reel Specifications: See Page 38 RP5 Series Top View Overcoat Side View T T L L LT Bottom View WT W LA WT W LT mm (inches) AVX Part Number* RP42010RxxxxGTTR RP42525RxxxxGTTR RP43725RxxxxGTTR RP43737RxxxxGTTR RP52010RxxxxGTTR RP52525RxxxxGTTR RP53725RxxxxGTTR RP53737RxxxxGTTR W ±0.25 (0.010) 2.54 (0.100) 6.22 (0.245) 6.35 (0.250) 9.40 (0.370) 2.54 (0.100) 6.22 (0.245) 6.35 (0.250) 9.40 (0.370) L ±0.25 (0.010) 5.08 (0.200) 6.22 (0.245) 9.53 (0.375) 9.40 (0.370) 5.08 (0.200) 6.22 (0.245) 9.53 (0.375) 9.40 (0.370) T ±0.13 (0.005) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) WT ±0.13 (0.005) 2.29 (0.090) 3.05 (0.120) 3.05 (0.120) 9.14 (0.360) 2.29 (0.090) 3.05 (0.120) 3.05 (0.120) 9.14 (0.360) LT ±0.13 (0.005) 0.76 (0.030) 1.02 (0.040) 1.27 (0.050) 1.27 (0.050) 0.76 (0.030) 1.02 (0.040) 1.27 (0.050) 1.27 (0.050) LA ±0.13 (0.005) 2.41 (0.095) 2.79 (0.110) 4.95 (0.195) 4.95 (0.195) – – – – Capacitance (pF) .95 pF 1.85 pF 3.0 pF 3.5 pF – – – – Power Max** (Watts) 10W 20W 30W 40W 4W 6W 8W 10W * xxxx denotes Ohm value. ** Test Condition: Chip soldered to a via patch on a 30-mil-thick Rogers RO4350 board; Land surfaces at 100ºC; maximum rated power applied. Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342. HOW TO ORDER RP4 2010 R AVX Series See chart above Case Size See chart above Type R = Resistor XXXX G T Value 0050 = 50Ω 0100 = 100Ω Tolerance J = ±5% G = ±2% Terminal T = Silver over Nickel TR Packaging TR = Tape & Reel Contact factory for custom ratings and sizes. POWER DERATING Power Dissipation 100% 80 60 Rated Safe Operating Range 40 20 0 -50˚C -25˚C 0˚C +25˚C +50˚C 75˚C 100˚C 125˚C 150˚C Heat Sink Temperature (°C) 5