S-150 150W Single Output Switching Power Supply series Features : AC input range selectable by switch Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 25KHz 2 years warranty SPECIFICATION MODEL OUTPUT INPUT S-150-5 S-150-7.5 S-150-9 S-150-12 S-150-13.5 S-150-15 S-150-24 S-150-27 DC VOLTAGE 5V 7.5V 9V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 30A 20A 16.7A 12.5A 11.2A 10A 6.5A 5.6A 3.2A CURRENT RANGE 0 ~ 30A 0 ~ 20A 0 ~ 16.7A 0 ~ 12.5A 0 ~ 11.2A 0 ~ 10A 0 ~ 6.5A 0 ~ 5.6A 0 ~ 3.2A RATED POWER 150W 150W 150.3W 150W 151.2W 150W 156W 151.2W 153.6W 180mVp-p 180mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 180mVp-p 180mVp-p VOLTAGE ADJ. RANGE 6 ~ 8.3V 1.0% 8 ~ 10.4V 1.0% 10.6 ~ 13.2V 12 ~ 15V 1.0% 1.0% 4.5 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% SETUP, RISE TIME 100ms, 50ms at full load HOLD UP TIME (Typ.) 28ms at full load VOLTAGE RANGE 88 ~ 132VAC/176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3.2A/115VAC 1.6A/230VAC COLD START 35A LEAKAGE CURRENT <3.5mA / 240VAC WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE OTHERS 80% 82% 83% 84% 85% 5.75 ~ 6.75V 8.63 ~ 10.13V 10.35 ~ 12.2V 13.8 ~ 16.2V 15.53 ~ 18.2V 17.25 ~ 20.3V 30 ~ 34.8V -10 ~ +60 87% 31.1 ~ 36.45V 55.2 ~ 64.8V (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL1012, UL60950-1, TUV EN60950-1, CCC GB4943 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC / 70% RH EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A MTBF 286.7K hrs min. MIL-HDBK-217F (25 199*110*50mm (L*W*H) 0.8Kg; 16pcs/13.8Kg/0.95CUFT DIMENSION 86% Protection type : Shut down o/p voltage, re-power on to recover ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 HARMONIC CURRENT PACKING NOTE 80% 248 ~ 370VDC 105 ~ 150% rated output power Note.5 Protection type : Shut down o/p voltage, re-power on to recover OVER VOLTAGE (Note 4) 240mVp-p 43 ~ 53V 1.0% LOAD REGULATION OVERLOAD EMC 240mVp-p 24 ~ 30V 1.0% LINE REGULATION PROTECTION SAFETY & 13.5 ~ 16.5V 21 ~ 28V 1.0% 1.0% S-150-48 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. If the power supply is short-circuited under no load, it will recover automatically when short-circuit is removed. File Name:S-150-SPEC 2010-10-18 S-150 150W Single Output Switching Power Supply Mechanical Specification Case No. 906 series Unit:mm 192 5 172 3.5 12 6 100 1 9.5 2 3 97 110 4 8.2 5 6 5-M3 37 7 199 6 6.5 3.5 50 3M3 20 20 12 24.5 3.5 Terminal Pin No. Assignment Pin No. 1 2 3 25 16.5 190.5 Assignment AC/L AC/N FG Pin No. 4,5 6,7 Assignment DC OUTPUT -V DC OUTPUT +V 159 Block Diagram 230 115 RECTIFIERS & FILTER EMI FILTER I/P fosc : 25KHz RECTIFIERS & FILTER POWER SWITCHING +V -V O.C.P. FG O.V.P. PWM CONTROL DRIVER Derating Curve Static Characteristics (24V) 2 80 1 S-150-5~12 CONVECTION 2 S-150-15~48 CONVECTION S-150-5~12 FORCED AIR LOAD (%) 60 1 40 20 -10 -10 0 0 10 20 30 40 50 45 AMBIENT TEMPERATURE ( ) 60 (VERTICAL) 55 (HORIZONTAL) OUTPUT VOLTAGE (V) 100 350 28 300 24 250 20 200 16 150 12 100 8 50 80 160 85 170 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 OUTPUT RIPPLE (mVp-p) Ta=25 32 130 260 INPUT VOLTAGE (V) 60Hz File Name:S-150-SPEC 2010-10-18