S5KP SERIES TRANSIENT VOLTAGE SUPPRESSOR VBR : 5.0 - 180 Volts PPK : 5000 Watts D2PAK FEATURES : 0.110(2.8) 0.236(6.0) 0.197(5.0) 0.055(1.4) 0.039(1.0) 0.035(0.9)max. 0.108(2.75) 0.092(2.35) 0.108(2.75) 0.092(2.35) MECHANICAL DATA 2 0.335(8.5) 0.357(9.1) 0.418(10.6) 0.378(9.60) * 5000W Peak Pulse Power * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Pb / RoHS Free * Case : D PAK(TO-263) * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Heatsink is Anode * Mounting position : Any * Weight : 1.7 grams (approximately) 0.189(4.8) 0.137(4.4) 0.055(1.4) 0.047(1.2) 0.409(10.4) 0.387(9.80) 0.33(8.38) 0.026(0.7) 0.011(0.3) 0.08(2.032) 0.24(6.096) 0.42(10.66) 0.63(17.02) 0.04(1.016) DEVICES FOR BIPOLAR APPLICATIONS Dimensions in inches and ( millimeters ) For Bi-directional use C or CA Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Peak Pulse Power Dissipation at tp = 1ms Symbol Value Unit PPK Minimum 5000 W PD 8.0 W IFSM 400 A TJ, TSTG - 55 to + 150 °C (Note 1, Fig. 4) Steady State Power Dissipation Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 2) Operating and Storage Temperature Range Notes: (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 4 Rev. 01 : April 27, 2005 ELECTRICAL CHARACTERISTICS ( Ta = 25°C) Min. Max. IT (mA) Reverse Stand off Voltage VRM (V) 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40 40 7.30 7.00 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 50 50 50 50 50 50 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 Breakdown Voltage @ IT ( Note 1 ) TYPE VBR (V) S5KP5.0 S5KP5.0A S5KP6.0 S5KP6.0A S5KP6.5 S5KP6.5A S5KP7.0 S5KP7.0A S5KP7.5 S5KP7.5A S5KP8.0 S5KP8.0A S5KP8.5 S5KP8.5A S5KP9.0 S5KP9.0A S5KP10 S5KP10A S5KP11 S5KP11A S5KP12 S5KP12A S5KP13 S5KP13A S5KP14 S5KP14A S5KP15 S5KP15A S5KP16 S5KP16A S5KP17 S5KP17A S5KP18 S5KP18A S5KP20 S5KP20A S5KP22 S5KP22A S5KP24 S5KP24A S5KP26 S5KP26A S5KP28 S5KP28A S5KP30 S5KP30A S5KP33 S5KP33A S5KP36 S5KP36A Page 2 of 4 Maximum Reverse Leakage @ VRM IR (µA) Maximum Peak Pulse Current (Note2) IPPM (A) Maximum Clamping Voltage @ IPPM VC (V) Maximum Temperature Coefficient of VBR 5000 5000 5000 5000 2000 2000 1000 1000 250 250 150 150 50 50 20 20 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 520 543 439 485 407 447 378 417 350 388 333 367 314 347 295 325 266 294 249 274 227 251 210 232 194 215 188 206 176 192 164 181 155 172 139 154 127 141 116 128 107 119 99 110 93 103 85 94 78 86 9.60 9.20 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.1 45.4 53.5 48.4 59.0 53.3 64.3 58.1 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 (%/°C) Rev. 01 : April 27, 2005 ELECTRICAL CHARACTERISTICS ( Ta = 25°C) Breakdown Voltage @ IT ( Note 1 ) TYPE VBR (V) Min. Max. IT (mA) Reverse Stand off Voltage VRM (V) Maximum Reverse Leakage @ VRM IR (µA) Maximum Peak Pulse Current (Note2) IPPM (A) S5KP40 44.4 54.3 5.0 40 10 S5KP40A 44.4 49.1 5.0 40 10 S5KP43 47.8 58.4 5.0 43 10 S5KP43A 47.8 52.8 5.0 43 10 S5KP45 50.0 61.1 5.0 45 10 S5KP45A 50.0 55.3 5.0 45 10 S5KP48 53.3 65.2 5.0 48 10 S5KP48A 53.3 58.9 5.0 48 10 S5KP51 56.7 69.3 5.0 51 10 S5KP51A 56.7 62.7 5.0 51 10 S5KP54 60.0 73.3 5.0 54 10 S5KP54A 60.0 66.3 5.0 54 10 S5KP56 62.2 76.1 5.0 56 10 S5KP56A 62.2 68.8 5.0 56 10 S5KP58 64.4 78.7 5.0 58 10 S5KP58A 64.4 71.2 5.0 58 10 S5KP60 66.7 81.5 5.0 60 10 S5KP60A 66.7 73.7 5.0 60 10 S5KP64 71.1 96.9 5.0 64 10 S5KP64A 71.1 78.6 5.0 64 10 S5KP70 77.6 95.1 5.0 70 10 S5KP70A 77.6 86.0 5.0 70 10 S5KP75 83.3 102 5.0 75 10 S5KP75A 83.3 92.1 5.0 75 10 S5KP78 86.7 106 5.0 78 10 S5KP78A 86.7 95.8 5.0 78 10 S5KP85 94.4 115 5.0 85 10 S5KP85A 94.4 104 5.0 85 10 S5KP90 100 122 5.0 90 10 S5KP90A 100 111 5.0 90 10 S5KP100 111 136 5.0 100 10 S5KP100A 111 123 5.0 100 10 S5KP110 122 149 5.0 110 10 S5KP110A 122 135 5.0 110 10 S5KP120 133 163 5.0 120 10 S5KP120A 133 147 5.0 120 10 S5KP150 167 204 5.0 150 10 S5KP150A 167 184 5.0 150 10 S5KP160 178 217 5.0 160 10 S5KP160A 178 196 5.0 160 10 S5KP170 189 231 5.0 170 10 S5KP170A 189 209 5.0 170 10 S5KP180 200 244 5.0 180 10 S5KP180A 200 221 5.0 180 10 Notes: (1) VBR measured after IT applied for 300 µs., IT = square wave pulse or equivalent. (2) Surge Current waveform per Fig. 3 and Derate per Fig. 2 (3) VF = 3.5 Volts max. for devices of VR < 100 V, and VF = 5 Volts max. for devices of VR > 100 V. (4) For Bi-directional devices having VR of 10 Volts and under the IR limit is doubled. (5) " S5K " will be omitted in marking on the diode. Page 3 of 4 70 78 65 72 62 69 58 65 55 61 52 57 50 55 49 53 47 52 44 49 40 44 37 41 36 40 33 36 31 34 28 31 26 28 24 26 19 21 18 19 17 18 16 17 Maximum Clamping Voltage @ IPPM VC (V) Maximum Temperature Coefficient of VBR 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 100 91 103 94 107 97 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 211 194 263 242 281 258 298 274 316 290 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.112 0.112 0.112 0.112 0.112 0.112 0.114 0.114 0.114 0.114 0.114 0.114 (%/°C) Rev. 01 : April 27, 2005 RATING AND CHARACTERISTIC CURVES ( S5KP SERIES ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 120 600 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE POWER OR CURRENT DERATING IN PERCENTAGE, % FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 500 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 400 300 200 100 0 0 0 25 50 75 100 125 150 175 1 2 Ta, AMBIENT TEMPERATURE, ( °C) 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PEAK PULSE POWER RATING CURVE 8 100 PPK , PEAK POWER (kW) PD, STEADY STATE POWER DISSIPATION (WATTS) 4 6 4 2 10 1.0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 0 0 25 50 75 100 125 150 175 200 tp, PULSE WIDTH TL, LEAD TEMPERATURE (°C) PEAK PULSE CURRENT - % IPPM FIG.5 - PULSE WAVEFORM tr = 10µs Peak Value IPPM 100 Ta=25 °C Pulse Width (td) is defined as that point where the peak current decays to 50% of IPPM Half Value - IPPM 2 50 10x1000 µs Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 4 of 4 Rev. 01 : April 27, 2005