Ordering number : ENN6293A SBE802 Schottky Barrier Diode SBE802 100V, 400mA Rectifier Applications • Package Dimensions High frequency rectification (switching regulators, converters, and choppers). unit : mm 1294 [SBE802] 2.9 • 0.6 0.05 2.8 Low forward voltage (VF max=0.7V). Fast reverse recovery time (trr max=10ns). Low switching noise. Low leakage current and high reliability due to highly reliable planar structure. 1 2 0.95 0.4 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode 0.9 0.7 0.2 • 0.15 3 1.6 • 4 0.6 • 5 0.2 Features SANYO : CPH5 0.4 Specifications Absolute Maximum Ratings at Ta=25°C (Value per element) Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 100 Nonrepetitive Peak Reverse Surge Voltage VRSM 100 V Average Output Current IO 400 mA Surge Forward Current Junction Temperature IFSM Tj Storage Temperature Tstg 50Hz sine wave, 1 cycle V 5 A --55 to +125 °C --55 to +125 °C Electrical Characteristics at Ta=25°C (Value per element) Parameter Reverse Voltage Symbol VR Forward Voltage VF Reverse Current IR C Interterminal Capacitance Reverse Recovery Time Thermal Resistance trr Rth(j-a) Conditions IR=200µA IF=200mA Ratings min typ max 100 V 0.5 IF=400mA VR=45V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. Unit 0.55 0.7 V 50 µA 20 Mounted on a ceramic board (600mm2✕0.8mm) V pF 10 ns 110 °C/W Marking : SA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 72600 GI IM / 80699 GI (KT) No.6293-1/3 SBE802 Electrical Connection 3 1 Duty≤10% 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode 2 10µs 50Ω 100Ω 10Ω 10mA 100mA 4 100mA 5 trr Test Circuit 5V IF -- VF 1.0 0.01 7 5 °C 75 °C 50 25°C 3 2 0.001 0 0.2 0.4 0.6 0.8 0.30 e q Rectangular wave θ 0.10 360° Sine wave 0.05 180° 360° 0.5 0 0 0.1 0.2 0.3 10 20 30 40 50 60 70 80 0.4 0.6 0.7 IT01109 90 100 IT01108 C -- VR f=1MHz 7 0.25 0.15 25°C 100 wr 0.20 50°C Reverse Voltage, VR -- V Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- W 0.35 75°C 0 PF(AV) -- IO qRectangular wave θ=60° wRectangular wave θ=120° eRectangular wave θ=180° rSine wave θ=180° 100°C IT01107 Average Forward Current, IO -- A 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V 3 5 7 100 IT01110 IS -- t 7 Surge Forward Current, IFSM(Peak) -- A 1.2 1.0 Forward Voltage, VF -- V 0.40 Ta=125°C Reverse Current, IR -- mA 10 0° C 25° C 3 2 Ta= 1 Forward Current, IF -- A 3 2 7 5 IR -- VR 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 7 5 3 2 0.0001 7 5 0.1 trr Current waveform 50Hz sine wave 6 Is 20ms t 5 4 3 2 1 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 IT01111 No.6293-2/3 SBE802 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2000. Specifications and information herein are subject to change without notice. PS No.6293-3/3