DESCRIPTION 03 REVISED DRAWING ER23620 2. MATERIAL SPECIFICATIONS: CONTACTS: COPPER ALLOY CRIMP SLEEVE: PHOS. BRONZE O-RING: SILICONE RUBBER SHEILD GROUND: 303 STAINLESS STEEL PER ASTM A582. BY APPD DATE XXX REV JDS 06/28/10 NOTES: UNLESS OTHERWISE SPECIFIED 1. INTERFACE COMPLIANT TO SMPTE 304 SPECIFICATION 3. FINISH SPECIFICATIONS: CONTACTS: .000100 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 CRIMP SLEEVE: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734. 4. REPLACEMENT KIT FOR ASSEMBLIES: 7763-3-3 (NOT PRE-POLISHED)AND 7763-4-3 (PRE-POLISHED) 2X CONTACT 5. USE CABLE ASSEMBLY PROCEDURE: CAP-E05. 2X PRE-POLISHED FERRULE ASSEMBLY O-RING SHEILD GROUND 2X SPLICE SLEEVE CRIMP SLEEVE 2X CONTACT CATALOG P/N: 7760-000-00709Z PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 1:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN PSM APPROVED IP DMF026 B DATE APPROVED 04/21/10 JCF DATE APPROVED 04/23/10 PP DATE 04/23/10 DATE 04/23/10 KIT-CONTACT W/ PRE-POLISHED FIBER FOR FIBER OPTIC CAMERA JACK A SD7760-000-00709Z SHT 1 OF REV 1 03