SDAD103 Series Solid State Devices, Inc. 2,500 to 15,000 VOLTS STANDARD RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SDAD10 3 __ __ __ __ 2/ │ │ │ │ └ Screening FEATURES: Stackable to 600 kV+ PIV 2.5kV to 15kV High Current Ratings Standard Reverse Recovery Time Void-free, Hermetically Sealed Diode Cells Controlled Avalanche Modular Design for Easy Stacking Storage and Operating Temps -65°C to +150°C Available in Fast, Ultra Fast and Hyper Fast Versions TX, TXV, and S-Level Screening Available 2/ Direct Replacement Upgrade – Microsemi / Unitrode type UGE-2.5 through type UGB-10 and 1N5603 __ = Not Screened │ │ │ │ TX = TX Level │ │ │ │ TXV = TXV Level │ │ │ │ S = S Level │ │ │ │ └ Reverse Recovery Time │ │ __= Standard Recovery Time │ │ │ │ │ └ Voltage 2.5 = 2.5kV, 5 = 5kV, │ │ 7.5 = 7.5kV, 10 = 10kV, and │ └ 15 = 15kV │ Power Rating (See Below) │ └ Package Size = 3 Inches Diameter ELECTRICAL CHARACTERISTICS 3/ Peak Inverse Voltage Part Number SDAD103E2.5 Reverse Recovery Time 5/ Average DC Output Current Tc = Case Temperature 4/ PIV (KV) Max (ns) 25 C 25 C 75 C 2.5 5000 6.60 SDAD103E5.0 5.0 5000 5.00 SDAD103 B 5.0 SDAD103 E 7.5 SDAD103 B 7.5 SDAD103 B 10 SDAD103 A 15 5.0 7.5 7.5 10 15 5000 5000 5000 5000 5000 4.40 3.30 3.00 2.30 1.54 SDAD103 H 2.5 SDAD103 H 5.0 SDAD103 H 7.5 SDAD103 H 10 SDAD103 H 15 2.5 5.0 7.5 10 15 5000 5000 5000 5000 5000 12.2 10.0 6.60 4.60 3.08 Surge Nonrepetitive Maximum Forward Voltage Drop Maximum Leakage Current @PIV Vf (V) If (A) 25 C 5.0 3.30 Ir (uA) 25 C 10 Replacement Part Number If(avg) 50 C 10.0 60 C 8.25 Ifsm 100 C 200 7.50 6.25 200 10 2.5 15 6.60 5.50 100 5.00 4.10 200 4.80 3.75 100 3.50 2.85 100 2.07 1.84 30 High Current Versions 20.0 16.5 300 15.0 12.5 300 10.0 8.20 250 7.0 5.70 150 4.14 3.68 125 9.0 13 13 17 25 2.2 1.6 1.5 1.1 0.72 5 10 5 5 2 UGE-2.5 UGE-5 1N5603 UGB-5 UGE-7.5 UGB-7.5 UGB-10 --- 3.10 6.20 8.45 12.1 16.8 10 8.0 5.0 3.5 2.8 30 30 20 10 10 ----------- SDAD103 Package: NOTES: 1/ 2/ 3/ 4/ For Ordering Information, Price, Curves, and Availability- Contact Factory. Screening based on MIL-PRF-19500. Screening flows available on request. Unless Otherwise Specified, All Electrical Characteristics @25ºC. Tc = 50 ºC typical operation in oil. Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk. Tc = 60 ºC typical operation with extender plates in air. 5/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0066C DOC