DESCRIPTION K REDRAWN ER18193 BY APPD DATE DCam 2. FOR CABLING INSTRUCTION, SEE CP-480. REV PSM 08/27/09 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR USE WITH RG-8, 8A, 11, 11A AND 213/U CABLE. 3. FOR CABLE CRIMPING, USE DIE KTH-2003. 4. FOR CABLE TRIMMING, USE KTJ-137 AND KTD-138. 5. INTERFACE PER MIL-STD-348, FIG. 304-1. 6. MATERIALS: INSULATOR: TEFLON PER ASTM D-4894 GASKET: SILICON RUBBER PER ZZ-R-765 OUTER CONTACT AND C-RING: PHOS. BRONZE PER ASTM B-103 ALL OTHER METAL PARTS; BRASS PER ASTM B-16 7. FINISHES: CENTER CONTACT: GOLD PER ASTM B488 ALL OTHER METAL PARTS: SILVER PER ASTM B-700 8. CONTACT AND FERRULE SUPPLIED UNASSEMBLED. 1.53 38.86 MARK: 91836 M39012/01-0502 KN-59-202 MMYY (MMYY = DATE CODE) ( 3X Ø.03 [0.76] ) .42 10.68 .81 20.54 CATALOG P/N: KN-59-202 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN JL APPROVED XXX DMF026 B DATE APPROVED 05/17/74 LI DATE APPROVED XX/XX/XX XXX DATE 05/24/74 DATE XX/XX/XX N PLUG M39012/01-0502 A SDKN-59-202 SHT 1 OF 1 REV K