SPECIFICATION FOR APPROVAL REF : PAGE : 1 PROD. ABC'S DWG NO. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. Ⅰ﹒CONFIGURATION & DIMENSIONS： A A' 1 4 B 510 2 A A' B C D E F H I J K L M 3 C I Marking white color D H 3 9.00±0.3 7.30 typ. 5.40±0.2 4.70±0.15 5.50 typ. 2.54 typ. 0.50 typ. 1.75 typ. 0.30 typ. 9.60 ref. 3.70 ref. 2.20 ref. 1.20 ref. m/m m/m m/m m/m m/m m/m m/m m/m m/m m/m m/m m/m m/m L F E 2 : : : : : : : : : : : : : K 4 M 1 Ⅱ﹒SCHEMATIC DIAGRAM： J N2 1 4 2 3 ( PCB Pattern ) N1 " " ： Polarity Ⅲ﹒MATERIAL DESCRIPTION： a﹒Core：Ferrite core b﹒Wire：Enamelled copper wire (Class F) c﹒Base：Phenolic base d﹒Terminal：Cu / Ni / Sn Ni plating 1---3 um Sn plating 7 um min. after soldering e﹒Adhesive：Epoxy resin f﹒Remark：Products comply with RoHS' requirements Ⅳ﹒GENERAL SPECIFICATION： a﹒Temp. rise：30℃ max. at rated current b﹒Storage temp.：-40℃ ---- +135℃ c﹒Operating temp .：-40℃ ---- +135℃ （ included Temp. rise ） d﹒Resistance to solder heat：260℃. 10 secs. AR-001A a b c d SPECIFICATION FOR APPROVAL PAGE : 2 REF : ABC'S DWG NO. PROD. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. Ⅴ﹒ELECTRICAL CHARCTERISTICS： RDC(Winding) Rated LL (1-4) ( μH ) @ 100KHz,0.1 Vrms (Ω) Current typ. ( 2-3 short ) max. max. (A) DWG No. L (1-4) @ 100KHz,0.1 Vrms ( μH ) SF0904110YP□-□□□ 11.0±25% 0.05 0.12 0.5 Bifilar SF0904250YP□-□□□ 25.0±25% 1.50 0.20 0.5 Sector SF0904510YP□-□□□ 51.0±25% 2.00 0.30 0.5 Sector SF0904101YP□-□□□ 100.0±25% 0.85 0.10 0.5 Sector SF0904471YP□-□□□ 470.0±25% 0.28 0.28 0.5 Bifilar SF0904102YP□-□□□ 1000.0±25% 0.29 0.40 0.5 Bifilar SF0904472YP□-□□□ 4700.0±25% 0.30 0.70 0.2 Bifilar 1). □：Packaging information … A：Bulk 2)."- □□□ ":Reference code B：Taping Reel 3). Rated voltage 80 Vdc / 42 Vac 4). Hi-Pot ( N-N )：250 Vac / 60 Hz , 3 mA / 1sec. AR-001A Winding SPECIFICATION FOR APPROVAL REF : PAGE : 3 PROD. ABC'S DWG NO. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. Ⅵ﹒CHARACTERISTICS CURVE： IMPEDANCE VS. FREQUENCY 100000 472Y 102Y 102Y Impedance(Ω) 10000 472Y 510Y 510Y 1000 471Y 471Y 101Y 250Y 110Y 110Y 250Y Measuring circuit : 100 101Y Network Analyzer 10 0.1 1 10 100 1000 Frequency(MHz) INSERTION LOSS VS. FREQUENCY 0 -5 Insertion Loss(dB) -10 101Y -15 471Y -20 110Y 101Y -25 102Y 250Y 471Y -30 -35 472Y -40 510Y 110Y 250Y 510Y Measuring circuit : 102Y 472Y -45 0.1 1 10 Frequency(MHz) AR-001A 100 1000 Network Analyzer SPECIFICATION FOR APPROVAL REF : PAGE: 4 PROD. ABC'S DWG NO. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. ■ IPC/ JEDEC J-STD-020C PROFILE Average Ramp-Up Rate：3℃ max. / sec. Ramp-Down Rate ：6℃ max. / sec. tP tS tL TP Temperature ( ℃ ) TL TS Time. ※. Preheat (TS) / (tS)：150~200℃ / 60~180sec. ※. Time maintained above (TL) / (tL)：217℃ / 60~150sec. ※. Peak temp：20~40sec. ※. Peak Temp.：Follow bellow AR-001A Package Volume mm3 Volume mm3 Thickness <350 350~2000 <1.6 mm 260+0℃* 260+0℃* 260+0℃* 1.6 mm~2.5 mm 260+0℃* 250+0℃* 245+0℃* ≧ 2.5 mm 250+0℃* 245+0℃* 245+0℃* Volume mm3 >2000 SPECIFICATION FOR APPROVAL REF : PAGE: 5 PROD. ABC'S DWG NO. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. Ⅶ﹒PACKAGING INFORMATION： ( 1 ) Configuration T Cover Tape A B N 2.0±0.5 ∮C ∮C D G Embossed carrier ※Carrier tape width : D 4 m/m P:8 m/m Start End 510 510 510 510 Leader no component 200 m/m min. Trailer no component 400 m/m min Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 13 - 16 330 B 21±0.8 C D 13±0.5 16 G 18 +0 N 50 -0 T 22.4 ( 3 ) Q'TY & G.W. Per package Outer : Carton Inner : Reel Series SF0904 AR-001A Q'TY (pcs) G.W. (gw) 1,500 600 Style 13 - 16 Q'TY (pcs) 9000 G.W. (Kg) 8.0 Size (cm) 40 x 40 x 24 SPECIFICATION FOR APPROVAL REF : PAGE: 6 PROD. ABC'S DWG NO. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. Ⅷ﹒DWGING NUMBER EXPRESSION： S F 0 9 0 4 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification P：Lead Free Standard products comply with RoHS' requirements 1 ~ 9：Lead Free Special products comply with RoHS' requirements Appendix code 2：Package Information Code AR-001A Inner Package A T.B.D. B T / R ( Reel Package ) Inner Package Q'TY T.B.D. 1500 pcs Remark SPECIFICATION FOR APPROVAL PAGE: 7 REF : PROD. ABC'S DWG NO. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. Ⅸ﹒RELIABILITY TEST FOR AUTOMOTIVE： Test item Test condition Reference High Temperature Exposure ( Storage ) MIL-STD-202 Method 108 1﹒Temperature： 2﹒Time：1000 Hr 125℃ 105℃ 85℃ Operational Life MIL-STD-T27 1﹒Temperature： 2﹒Time：1000 Hr 125℃ 105℃ 85℃ Temperature Cycling JESD22 Method JA-104 Moisture Resistance MIL-STD-202 Method 103 1﹒Time：24 Hr 2﹒Cycles：1 cycles Biased Humidity MIL-STD-202 Method 103 1﹒Temperature：85℃ / 85％ RH 2﹒Time：1000 Hr External Visual MIL-STD-883 Method 2009 1﹒Inspect device construction，marking and workmanship﹒ 2﹒Electrical Test not required﹒ Physical Dimension JESD22 Method JB-100 1﹒Verify physical dimensions to the applicable device detail specification﹒ 2﹒User(s) and Suppliers spec﹒Electrical Test not required﹒ Terminal strength ( Leaded ) MIL-STD-202 Method 215 Conditions：(a) 910 g Resistance to solvents MIL-STD-202 Method 215 Add Aqueous wash chemical﹒OKEM Clean or equivalent﹒ Vibration MIL-STD-202 Method 204 1﹒Time：5 g for 20 min 2﹒Cycles：12 cycles 3﹒Test from：10 - 2000 Hz 4﹒PCB：8〞× 5〞× 0.31〞 Thermal shock MIL-STD-202 Method 107 1﹒Temperature：-40℃ / +125℃ 2﹒Cycles：300 cycles 3﹒Maximum transfer time：20 Sec 4﹒Dwelltime：15 minutes﹒ Solderability J-STD-002 For both Leaded & SMD﹒Electrical Test not required﹒ Magnification 40X﹒Conditions： Leaded：Method A @ 235℃，category 3﹒ SMD：a) Method B ，4 Hrs @ 155℃ dry heat @ 235℃ b) Method B @ 215℃，category 3﹒ c) Method D category 3 @ 260℃﹒ Pull strength ( SMD ) JIS-C-6429 Force of 1.8 Kg for 60 seconds﹒ AR-001A 1﹒Temperature： -40℃ to +125℃ -40℃ to +105℃ -40℃ to +85℃ 2﹒Cycles：1000 cycles (b) 1.13 Kg (c) 1.45 Kg - mm SPECIFICATION FOR APPROVAL REF : PAGE: 8 PROD. ABC'S DWG NO. SMD LINE FILTER NAME SF0904□□□□P□-□□□ ABC'S ITEM NO. Ⅹ﹒UL CARD： OBMW2 Magnet Wire-Component September 8, 2000 JUNG SHING WIRE CO LTD 231 CHUNG CHENG RD, SEC 3 JEN-TEH HSIANG, TAINAN HSIEN TAIWAN Mtl Dsg AIW CFUEWB EIAIW EILOCKY EILOCKW EIW EIW-2 FL.EILOCKY LSFFW LSUEW PEW PEY SF.FLW SF.EIW SF.BY@ SF.FLY@ SF.BLOCKBS SF.EILOCKY# SF.EILOCKBS SF.BW@ SFFW Mark Dsg ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ BC Coat Typ Polyamideimide Polyurethane Polyesterimide Polyesterimide Polyesterimide Polyamideimide Polyamide Modified Epoxy ____ ____ Polyesterimide Polyesterimide Modified Polyester Polyurethane Polyurethane Polyester Polyester Modified Polyester Polyesterimide Modified Polyester Modified Polyester Modified Polyester Polyesterimide Polyesterimide Polyamide ____ ____ ____ ____Nylon ____ Nylon Nylon Modified Polyamide Polyamide Modified Polyamide ____ Modified Polyester Polyurethane 287806002 Mtl Dsg SFFY UEW-1 UEW-2 UEW-4 UEY UEY-2 OC ____ ____ E174837 ANSI Type Temp Class MW81-C MW75C MW35C ___ ___ 220 130 200 180 200 ___ MW74-C ___ MW79-C ___ ___ MW24-C MW26C MW77C MW27-C MW27-C ___ ___ ___ 180 180 MW26C MW79 ____ ____ ____ ____ ____ ____ BC Coat Typ OC Polyamide ____ ____ ____ Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane 155 155 A not-for-profit organization dedicated to public safety and committed to quality service Page 1 of 2 Mark Dsg 220 200 155 155 130 155 155 155 180 155 155 155 Nylon Polyamide ANSI Type Temp Class MW80C MW2-C ___ 155 105 130 130 130 130 MW75C MW28-C MW28-C @-May be suffixed by LZ; # - May be suffixed by LZ, EL or LZI. LZ - Signifies magned wires twisted together; EL - signifies base coated magnet wire laid parallel with top coat applied overall; LZL - signifies base coated magnet wire twisted together and covered with top coat o verall. Marking: Compan y name or trademarks Recognized Component Mark. or 榮星電線 , material designation or marked designation on packaed or reel, and See General Information Preceding These Recogn itions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. 287806002 AR-001A Page 2 of 2 OBMW2⁄E174837 September 8 , 2000 SPECIFICATION FOR APPROVAL REF : PAGE: 9 PROD. NAME AR-001A ABC'S DWG NO. SMD LINE FILTER ABC'S ITEM NO. SF0904□□□□P□-□□□