Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A GLASS PASSIVATED SUPER FAST RECOVERY RECTIFIER SF10-005GTHRU SF10-06G FEATURES z LOW FORWARD VOLTAGE z HIGH SURGE CAPABILITY z SUPER FAST SWITCHING SPEED z GOOD FOR SWITCHING MODE CIRCUIT z GLASS PASSIVATED CHIP JUNCTION 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) MECHANICAL DATA z CASE: MOLDED PLASTIC, DO41, DIMENSIONS IN INCHES AND (MILLIMETERS) z EPOXY: UL 94V-0 FLAME RETARDANT PLASTIC CASE z LEADS: AXIAL LEADS, SOLDERABLE PER MIL-STD-202, METHOD 208 z MOUNTING POSITION: ANY z WEIGHT: 0.34 GRAMS .107(2.7) .080(2.0) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% SF10 SF10 SF10 SF10 SF10 SF10 SF10 SF10 UNITS RATINGS SYMBOL -005G -01G -015G -02G -03G -04G -05G -06G MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 150 200 300 400 500 600 V MAXIMUM RMS VOLTAGE VRMS 35 70 105 140 210 280 350 420 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 150 200 300 400 500 600 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT IO 1.0 A 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF IFSM 30 A SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) CJ 15 10 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθjc 50 ℃/W STORAGE TEMPERATURE RANGE TSTG - 55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP - 55 TO + 150 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) SF10 SF10 SF10 CHARACTERISTICS SYMBOL -005G -01G -015G MAXIMUM FORWARD VOLTAGE AT IO DC VF 0.95 SF10 -02G SF10 SF10 -03G -04G 1.25 SF10 SF10 -05G -06G 1.85 UNITS V MAXIMUM REVERSE CURRENT AT 25℃ IR 10 μA MAXIMUM REVERSE CURRENT AT 100℃ IR 100 μA MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR 35 NOTE : 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A nS SF10-005GTHRU SF10-06G Page: 1 RATINGS AND CHARACTERISTIC CURVE SF10-005G THRU SF10-06G FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50Ω NO INDUCTIVE FIG. 2-TYPICAL FORWARD Trr 100Ω NO INDUCTIVE CURRENT DERATING CURVE 2.0 D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) 0 -0.25A (+) CURRENT (A) AVERAGE FORWARD +0.5A (-) 1.0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE (oC) 1cm NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS Single Phase Half Wave 60 Hz Resistive or Inductive Load SET TIME BASE FOR 10/20 ns/cm FORWARD CHARACTERISTICS 10 1000 100 10 TJ=25oC 1.0 0.1 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) FIG. 4-TYPICAL INSTANTANEOUS FIG. 3-TYPICAL REVERSE CHARACTERISTICS SF10-005G~10-02G 1.0 SF10-03G~10-04G .1 .01 SF10-06G .001 0 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 25 20 15 10 5 40 10 20 50 NUMBER OF CYCLES AT 60 Hz SF10-005GTHRU SF10-06G 1.6 1.8 100 TJ=25oC SF10-005G~10-02G 20 10 6 4 SF10-03G~10-06G 2 1 5 1.0 1.2 1.4 100 8.3 ms Single Half Sine Wave (JEDEC Method) JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 40 1 .6 .8 200 FORWARD SURGE CURRENT 0 .4 FIG. 6-TYPICAL JUNCTION CAPACITANCE FIG. 5-MAXIMUM NON-REPETITIVE 30 .2 INSTANTANEOUS FORWARD VOLTAGE (V) .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE (V) Page: 2