Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 3A GLASS PASSIVATED SUPER FAST RECOVERY RECTIFIER SF30-005G THRU SF30-06G FEATURES z LOW POWER LOSS, HIGH EFFICIENCY z LOW FORWARD VOLTAGE z HIGH CURRENT CAPABILITY z HIGH SPEED SWITCHING z HIGH SURGE CAPABILITY z HIGH RELIABILITY z GLASS PASSIVATED CHIP JUNCTION 1.0(25.4) MIN .052(1.3) .048(1.2) .375(9.5) .335(8.5) MECHANICAL DATA z CASE: MOLDED PLASTIC, DO201AD, DIMENSIONS IN INCHES AND (MILLIMETERS) z EPOXY: UL 94V-0 MOLDING COMPOUND z LEADS: MIL-STD-202E, METHOD 208C GUARANTEED z MOUNTING POSITION: ANY z WEIGHT: 1.2 GRAMS .220(5.6) .197(5.0) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% SF30 SF30 SF30 SF30 SF30 SF30 SF30 SF30 UNITS RATINGS SYMBOL -005G -01G -015G -02G -03G -04G -05G -06G MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 150 200 300 400 500 600 V MAXIMUM RMS VOLTAGE VRMS 35 70 105 140 210 280 350 420 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 150 200 300 400 500 600 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT IO 3.0 A 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF IFSM 125 A SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) CJ 50 30 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθjc 30 ℃/W STORAGE TEMPERATURE RANGE TSTG - 55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP - 55 TO + 150 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) SF30 SF30 SF30 CHARACTERISTICS SYMBOL -005G -01G -015G MAXIMUM FORWARD VOLTAGE AT IO DC VF 0.95 SF30 -02G SF30 SF30 -03G -04G 1.25 SF30 SF30 -05G -06G 1.85 UNITS V MAXIMUM REVERSE CURRENT AT 25℃ IR 10 μA MAXIMUM REVERSE CURRENT AT 100℃ IR 100 μA 35 nS MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR NOTE: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20×20×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A SF30-005G THRU SF30-06G Page: 1 RATINGS AND CHARACTERISTIC CURVE SF30-005G THRU SF30-06G FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC FIG. 2-TYPICAL FORWARD CURRENT DERATING CURVE Trr 50Ω NO INDUCTIVE 100Ω NO INDUCTIVE AVERAGE FORWARD CURRENT (A) +0.5A (-) D.U.T. 0 PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) -0.25A (+) -1.0A 1cm 10 1.0 TJ=25oC 0.1 .01 40 60 80 1 0 SF30-005G~30-02G SF30-03G~ 30-04G 1.0 .1 .01 SF30-05G~30-06G .001 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (V) 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 6-TYPICAL JUNCTION CAPACITANCE 175 200 150 100 SF30-005G~30-02G JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 2 10.0 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) 100 20 3 FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 3-TYPICAL REVERSE CHARACTERISTICS 1000 0 4 Single Phase Half Wave 60 Hz Resistive or Inductive Load 25 50 75 100 125 150 175 AMBIENT TEMPERATURE (oC) SET TIME BASE FOR 10/20 ns/cm NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS 6 5 125 100 75 50 25 40 20 10 6 4 SF30-03G~30-06G TJ=25oC 2 0 1 5 10 20 50 NUMBER OF CYCLES AT 60 Hz SF30-005G THRU SF30-06G 100 1 .1 .2 4 1.0 2 4 10 REVERSE VOLTAGE (V) 20 40 100 Page: 2 2.0