1090.00 MHz SAW Filter • • • • Ideal for Digital Set-Top-Box Selectivity in 1090.00 MHz Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Ultra Miniature Ceramic QCC8B SMD Package SF5014 Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit Input Power Level Pin 0 dBm DC Voltage VDC Between Any Two Pins VDC 0 V Operating Temperature Range TA -10 ~ +65 °C Storage Temperature Range Tstg -40 ~ +85 °C Electronic Characteristics Parameter Nominal Frequency (at 25°C) (Center frequency between 3dB point) Insertion Loss 1084.00 … 1096.00 MHz Usable Passband Sym Minimum Typical Maximum Unit fC NS 1090.00 NS MHz IL 3.5 4.0 5.5 dB BW3 - 12 - MHz ∆α - 1.0 3.0 dB 840.00 … 1015.00 MHz 36.0 42.0 - dB 1015.00 … 1060.00 MHz 44.0 50.0 - dB 22.0 27.0 - dB 1150.00 … 1265.00 MHz 35.0 40.0 - dB 1265.00 … 1340.00 MHz 42.0 50.0 - dB |fA| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - MΩ Input / Output Impendance (nominal) - - 50 - Ω Passband Ripple 1084.00 … 1096.00 MHz Relative Attenuation 1120.00 … 1150.00 MHz Frequency Aging Absolute Value during the First Year αrel NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 5. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f0. The nominal frequency at any case temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)2]. 6. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 7. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 8. 4. Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 9. For questions on technology, prices and delivery please contact our sales offices or e-mail [email protected]. Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 © April 2004 by Vanlong Technology Co., Ltd. Email: [email protected] Web: http://www.vanlong.com SF5014 1090.00 MHz SAW Filter Package Dimensions (QCC8B) Electrical Connections Terminals Connection 1,2 Input 5,6 Output 3,7 To be Grounded 4,8 Case Ground Package Dimensions Marking Dimensions Nom (mm) Dimensions Nom (mm) A 1.00 D 1.50 B 1.27 E 3.80 C 0.60 F 3.80 Test Circuit 1. F5014 - Part Code F5014 2. Frequency (MHz) in 5 digits 1090.0 3. Date Code: YWW From 50Ω source To 50Ω load Y : Last digit of year WW : Week No. Typical Frequency Response Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 © April 2004 by Vanlong Technology Co., Ltd. Email: [email protected] Web: http://www.vanlong.com SF5014