SENSITRON SEMICONDUCTOR SHD231006 TECHNICAL DATA DATA SHEET 4322, REV. A HERMETIC POWER MOSFET N-CHANNEL SHD231006S -- S-100 (JANTX level room temp) Screening per Sensitron datasheet FEATURES: • 60 Volt, 3.0 Ohm, 0.25 A MOSFET • Isolated Hermetic, Ceramic Package • Fast Switching • Low RDS (on) MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. RATING DRAIN TO SOURCE VOLTAGE GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ TC = 25°C PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25°C THERMAL RESISTANCE, JUNCTION TO CASE SYMBOL VDS VGS ID (on) IDM TOP/TSTG PD RthJC MIN. -55 - TYP. - MAX. 60 ±20 0.25 1.3 +150 2.5 50 UNITS Volts Volts Amps Amps °C W °C/W BVDSS 60 - - Volts ID(on) - 0.8 - Amp - 3.0 4.0 2.5 - Ω ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 10μA ON-STATE DRAIN CURRENT VDS = 7.5V, VGS = 10V Pulse width = 300μs, Duty cycle ≤ 2% STATIC DRAIN TO SOURCE ON STATE RESISTANCE Pulse width = 300μs, VGS = 10V, ID = 500mA Duty cycle ≤ 2% VGS = 5V, ID = 200mA GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250μA FORWARD TRANSCONDUCTANCE VDS = 15V, ID = 200mA ZERO GATE VOLTAGE DRAIN CURRENT VDS = 60V, VGS = 0V VDS = 60V, VGS = 0V, TC = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 15V GATE TO SOURCE LEAKAGE REVERSE VGS = -15V VDS = 0V TOTAL GATE CHARGE VDS = 30V, GATE-SOURCE CHARGE VGS = 10V, GATE-DRAIN CHARGE ID = 250mA TURN ON DELAY TIME VDD = 25V, RISE TIME ID = 150mA, TURN OFF DELAY TIME FALL TIME INPUT CAPACITANCE VGS = 0 V, OUTPUT CAPACITANCE VDS = 25 V, REVERSE TRANSFER CAPACITANCE f = 1.0MHz RDS(ON) VGS(th) gfs 1.0 - 250 - - IDSS IGSS Qg Qgs Qgd td(ON) tr td(OFF) tf Ciss Coss Crss - - - - 0.4 0.06 0.06 7.5 6.0 7.5 3.0 25 6.0 1.2 Volts S(1/Ω) 1 500 1 -1 μA 0.6 nC μA 20 nsec 20 - ©2005 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected] • pF SHD231006 SENSITRON TECHNICAL DATA DATA SHEET 4322, REV. A MECHANICAL DIMENSIONS: in Inches / mm .008(.20) R Typ 3 Places .012(.30) R .054 (1.370 .045 1.160) 3 .105 (2.68 .095 2.41) 2 1 .036 (.91 .024 .61) .0125 Typ (.318 ) .024 (.61 .016 .41) .093 (2.37 .087 2.21) .079 (2.01 .071 1.81) .125 (3.18 .115 2.92) LCC-3 PINOUT TABLE DEVICE TYPE N Channel FET PIN 1 Gate PIN 2 Source PIN 3 Drain DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2005 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected] •