SENSITRON SHD219504

SENSITRON
SEMICONDUCTOR
SHD219504
TECHNICAL DATA
DATA SHEET 607, REV A
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
• 400 Volt, 0.3 Ohm, 9.0A MOSFET
• Low RDS (on)
• Equivalent to IRF350 Series
MAXIMUM RATINGS
ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT
@ TC = 25°C
ON-STATE DRAIN CURRENT
@ TC = 100°C
OPERATING AND STORAGE TEMPERATURE
TOTAL DEVICE DISSIPATION @ TC = 25°C
THERMAL RESISTANCE, JUNCTION TO CASE
SYMBOL
VGS
ID
ID
TOP/TSTG
PD
RthJC
MIN.
-55
-
TYP.
-
MAX.
±20
14
9.0
+150
347
0.36
UNITS
Volts
Amps
Amps
°C
Watts
°C/W
SYMBOL
BVDSS
MIN.
400
TYP.
MAX.
-
-
UNITS
Volts
RDS(ON)
-
-
VGS(th)
2.0
-
0.3
0.4
4.0
IDSS
-
-
IGSS
-
-
-
-
52
5.0
25
-
-
-
-
-
-
-
-
2600
680
250
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 1.0mA
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 9.0A
VGS = 10V, ID = 14A
GATE THRESHOLD VOLTAGE VDS = VGS, ID = 0.25mA
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = Max. Rating, VGS = 0V
VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDD = 200V,
RISE TIME
ID = 14A,
TURN OFF DELAY TIME
RG = 2.2Ω
FALL TIME
TOTAL GATE CHARGE
ID = 14A,
GATE TO SOURCE CHARGE
VGS = 10V,
GATE TO DRAIN CHARGE
VDS =0.5xMax. Rating
DIODE FORWARD VOLTAGE
TC = 25°C, IS = 14A,
VGS = 0V
REVERSE RECOVERY CHARGE
TJ = 25°C,
di/dt = 100A/μsec, VDD = 50V
REVERSE RECOVERY TIME
TJ = 25°C,
IF = 14A,
di/dt = 100A/μsec, VDD = 50V
INPUT CAPACITANCE
VGS = 0 V
OUTPUT CAPACITANCE
VDS = 25 V
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
Ω
td(ON)
tr
td(OFF)
tf
Qg
Qgs
Qgd
VSD
QRR
μA
250
1000
100
-100
35
190
170
130
110
18
65
1.7
nC
nC
nC
Volts
11
μC
nA
nsec
1200
trr
Ciss
Coss
Crss
Volts
nsec
-
© 2001 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected] •
pF
SHD219504
SENSITRON
DATA SHEET 607, REVISION A
MECHANICAL DIMENSIONS: in Inches / mn
.145
(3.68)
.037
(.94)
.030 (.76) Min.
.050 (1.27)
2
.375
(9.53)
1
.140 (3.56)Typ.
.035 (.89) Min. .450 (11.43)
3
.415
(10.54)
.157 (3.99)
.625
(15.88)
LCC-3P
PINOUT TABLE
N CHANNEL MOSFET IN
AN LCC-3P PACKAGE
PIN 1
PIN 2
PIN 3
DRAIN
SOURCE
GATE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
© 2001 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]