NTE SIT10000M200

105°C SNAP–IN ALUMINUM ELECTROLYTIC
SIT SERIES
SUBMINIATURE
(SIT: High Temperature Snap–in)
MECHANICAL SPECIFICATIONS
Marking:
The SIT Snap–in series subminiature aluminum electrolytic capacitors are especially suitable for applications requiring high capacitance, low cost, and very small size. In fact, you’ll find these
capacitors in some of the most demanding applications, from
precision medical electronics and automobiles to the newest
personal computers and disk drives.
They operate over a broad temperature range and are available
in either blister pack or bulk.
Consists of series type, nominal capacitance, rated
voltage, temperature range, anode and/or cathode
identification, vendor identification.
Recommended Cleaning Solvents:
Chlorofluorocarbon solvents used to remove flux from
printed circuit boards can penetrate the capacitor end–
seals, cause corrosion when voltage is applied and capacitor failure. Avoid halogenated solvents and consider these alternatives: Clean the capacitors with
water/detergent or cleaning solvents free of halogen
groups such as alcohol or terpene solution, or mount
the capacitor after board cleaning.
RATINGS
Capacitance Range: 100µf to 10,000µf
Tolerance: ±20%
Voltage Range: 50V to 250V
CASE SIZE AND DIMENSIONS:
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
SIT SERIES
–40°C to +105°C (–40°F to +221°F)
Leakage Current: I ≤ 3 x √CV (measured after
5 minutes @ rated voltage and +20°C (+68°F)
10.0
Polarity Bar
Vinyl Sleeve
Safety Vent
I = Leakage Current (µA)
C = Nominal Capacitance (µf)
V = Rated Voltage (V)
6.3 ±1
L+2
Max
Capacitance Tolerance (M): ±20%
measured at +20°C (+68°F), 120HZ
Surge Voltage:
2 ±0.1
Dia
DØ+1
Max
10 ±0.1
+0.2
0.8 –0.1
DC Rated Voltage
50
200
250
Surge Voltage
63
250
300
1.5 ±0.2
Load Life: 2000 ±12Hrs @ Max rated temperature
and rated voltage
Leakage Current: Within ±200% of specified value
Dissipation Factor: Within ±150% of specified value
Capacitance Change Max: Within ±20% of initial value
6.3 ±1
4.0
DØ
PC Board Mounting Holes
Leakage Current: Within values specified above
Dissipation Factor: Within ±150% of specified value
Shelf Life: 1000 ±6Hrs @ Max rated temperature,
no voltage applied
2.0 Max
Terminal
ORDERING INFORMATION
SIT
1000
M
50
Series
Capacitance
Tolerance
Voltage
14
NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
105°C SNAP–IN ALUMINUM ELECTROLYTIC
SIT SERIES
SIT Series Dimensions: Diameter (D Ø) x Length (L): mm
WV
200
250
100
22 x 20
22 x 30
150
22 x 30
22 x 40
220
22 x 40
22 x 50
330
22 x 50
22 x 40
470
22 x 40
30 x 35
560
22 x 45
25 x 50
680
22 x 45
30 x 45
820
25 x 50
30 x 50
30 x 45
35 x 45
Cap (µf)
1000
50
22 x 25
1500
35 x 50
2200
22 x 40
3300
22 x 50
4700
22 x 45
6800
30 x 50
8200
30 x 45
10000
30 x 50
* These dimensions are for reference only, please consult the factory for actual size.
NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
15