6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 SL5511 PACKAGE SCHEMATIC ANODE 1 6 6 BASE 6 CATHODE 2 1 5 COL 1 3 4 EMITTER 6 1 DESCRIPTION The SL5500, SL5501, SL5504 and SL5511 are optically coupled isolators each consisting of an infrared emitting GaAs diode and a silicon NPN phototransistor with accessible base. These devices are housed in 6-pin dual-in-line packages (DIP). FEATURES • • • • • High output/input DC current transfer ratio Low saturation voltage High isolation voltage of 5.3 kV RMS UL recognized (File # E90700) VDE recognized (File # 94766) - Ordering option ‘300’ (e.g. SL5500.300) APPLICATIONS • • • • • Power supply regulators Digital logic inputs Microprocessor inputs Appliance sensor systems Industrial controls © 2003 Fairchild Semiconductor Corporation Page 1 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 Parameters SL5511 Symbol Value Units Storage Temperature TSTG -55 to +150 °C Operating Temperature TOPR -55 to +100 °C Lead Solder Temperature TSOL 260 for 10 sec °C 260 mW 3.3 mW/°C TOTAL DEVICE Total Power Dissipation at TA = 25°C Ambient PD Derate Linearly from 25°C EMITTER Continuous Reverse Voltage VR 3 V Continuous Forward Current IF 100 mA IF(pk) 3.0 A Forward Current - Peak (10 µs pulse, δ = 0.01) Total Power Dissipation TA = 25°C Ambient PD Derate Linearly from 25°C 150 mW 2.0 mW/°C DETECTOR Collector to Emitter Voltage (open base) Collector to Base Voltage (open emitter) SL5500, SL5501, SL5511 SL5504 SL5500, SL5501, SL5511 SL5504 VCEO VCBO 30 80 70 120 V Emitter to Collector Voltage (open base) VECO Emitter to Base Voltage (open colletor) VEBO 7 V IC 100 mA 150 mW 2.0 mW/°C DC Collector Current Detector Power Dissipation @ TA = 25°C Ambient PD Derate Linearly from 25°C © 2003 Fairchild Semiconductor Corporation Page 2 of 10 7 V V 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 SL5511 ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS Parameters Test Conditions Symbol Device VF All IR All Min Typ* Max Units 1.23 1.3 V EMITTER Input Forward Voltage IF = 20 mA, TA = 25 to 70°C IF = 2 mA Reverse Current VR = 3 V, TA = 25 to 70°C DETECTOR VCE = 10 V VCE = 30 V Leakage Current Collector to Emitter ICEO All VCE = 10 V, TA = 70°C VCB = 30 V ICBO 1.10 1.2 V 0.001 10 µA 1 50 nA 0.005 10 µA 0.001 500 nA 50 µA Breakdown Voltage Collector to Emitter IC = 10 µA, IF = 0 BVCEO SL5500, SL5501, SL5511 30 100 SL5504 80 110 SL5500, SL5501, SL5511 30 120 SL5504 120 150 V V Collector to Base IC = 10 µA, IF = 0 BVCBO Emitter to Collector IE = 10 µA, IF = 0 BVECO All 7 10 V Emitter to Base IE = 10 µA, IF = 0 BVEBO All 7 10 V ISOLATION CHARACTERISTICS Characteristic Test Conditions Symbol Min f = 60Hz, T = 1 min. VISO 5300 Isolation Resistance VI-O = ±500 VDC RISO 1 Isolation Capacitance f = 1 MHz, V = 0V CISO Input-Output Isolation Voltage (note 1) Typ* Max Units VAC(RMS) TΩ 10 0.6 1.3 pF *Typical values at TA = 25°C © 2003 Fairchild Semiconductor Corporation Page 3 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 SL5511 TRANSFER CHARACTERISTICS (TA = 25°C Unless otherwise specified.) DC Characteristics Test Conditions Symbol Device Min IF = 10 mA, VCE = 0.4 V SL5500 50 300 IF = 10 mA, VCE = 0.4 V, TA = 70°C SL5500 40 300 SL5501, SL5504 25 400 SL5500 40 SL5500 30 IF = 2 mA, VCE = 5 V, TA = 25°C to 70°C SL5501, SL5504 15 IF = 2 mA, VCE = 5 V, TA = 25°C to 70°C SL5511 25 IF = 0.5 mA, VCE = 0.4 V, TA = 25°C to 70°C SL5511 20 IF = 10 mA, VCE = 0.4 V, TA = 25°C to 70°C IF = 2 mA, VCE = 5 V Output/Input Current Transfer Ratio Collector-Emitter Saturation Voltage IF = 2 mA, VCE = 5 V, TA = 70°C CTR IF = 50 mA, IC = 10 mA IF = 20 mA, IC = 2 mA AC Characteristics Test Conditions Typ Max % SL5500 0.4 VCE(SAT) SL5501, SL5504, SL5511 0.4 Symbol Device ton SL5500, SL5501, SL5511 20 SL5504 50 SL5500, SL5501, SL5511 50 SL5504 150 Min Units Typ Max V Units Saturated Switching Times Turn-On Time Turn-Off Time RL = 1 kΩ, IF = 16 mA, VCC = 5 V See Fig. 1 and Fig. 2 toff µs µs Note 1. Device considered a two-terminal device: pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted together. © 2003 Fairchild Semiconductor Corporation Page 4 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 SL5511 VI +VCC VI 0 VO VO RL 50Ω 90% 10% 0 ton toff Fig. 1 Switching Circuit Fig. 2 Waveforms Fig. 3 LED Forward Voltage vs. Forward Current Fig. 4 Normalized CTR vs. Forward Current 1.8 1.4 VCE = 5.0V TA = 25°C 1.7 Normalized to I F = 10mA 1.2 1.0 1.5 NORMALIZED CTR VF - FORWARD VOLTAGE (V) 1.6 1.4 TA = - 55°C 1.3 TA = 25°C 0.8 0.6 0.4 1.2 TA = 100°C 0.2 1.1 0.0 1.0 1 10 0 100 5 10 15 20 FORWARD CURRENT - I F (mA) I F - LED FORWARD CURRENT (mA) Fig. 5 Normalized CTR vs. Ambient Temperature 1.6 Fig. 7 CTR vs. RBE (Unsaturated) 1.0 1.4 0.9 IF = 5mA NORMALIZED CTR NORMALIZED CTR 0.8 1.2 IF = 10mA 1.0 0.8 IF = 20mA 0.7 0.6 IF = 10mA 0.5 0.4 IF = 5mA 0.3 IF = 20mA 0.2 0.6 0.4 -75 -50 VCE = 5V, TA = 25°C Normalized to CTR at RBE = Open 0.1 Normalized to IF = 10 mA TA = 25°C 0.0 10 -25 0 25 50 75 100 125 1000 R BE - BASE RESISTANCE (k Ω) AMBIENT TEMPERATURE - TA (oC) © 2003 Fairchild Semiconductor Corporation Page 5 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 Fig. 8 Normalized toff vs. RBE Fig. 7 CTR vs. RBE (Saturated) 1.4 1.0 1.3 0.9 1.2 1.1 I F = 20mA NORMALIZED toff NORMALIZED CTR 0.8 0.7 0.6 I F = 10mA 0.5 0.4 I F = 5mA 0.3 SL5511 1.0 VCC = 10V I C = 2mA Ω R L = 100 NORMALIZED TO: t off AT RBE = OPEN 0.9 0.8 0.7 0.6 0.5 0.4 0.2 0.3 VCE = 0.3V, TA = 25°C Normalized to CTR at RBE = Open 0.1 0.0 10 100 0.2 0.1 10 1000 100 1000 10000 RBE - BASE RESISTANCE (k Ω) RBE - BASE RESISTANCE (k Ω) Fig. 9 Normalized ton vs. RBE Fig. 10 Switching Speed vs. Load Resistor 6.0 1000 5.5 IF = 10mA VCC = 10V 5.0 TA = 25°C 100 4.0 SWITCHING SPEED - (µs) NORMALIZED t on 4.5 3.5 3.0 2.5 2.0 1.5 VCC = 10V I C = 2mA 1.0 R L = 100 Ω NORMALIZED TO t on AT RBE = OPEN 0.5 Toff Tf 10 Ton Tr 1 0.0 10 100 1000 10000 R BE - BASE RESISTANCE (kΩ ) 0.1 0.1 Fig. 11 Collector Emitter Saturation Voltage vs. Collector Current 1 10 100 R-LOAD RESISTOR (k Ω) 100 Fig. 12 Dark Current vs. Ambient Temperature I CEO - COLLECTOR -EMITTER DARK CURRENT (nA) 10000 10 VCEsat - (V) 1 I F = 2.5mA 0.1 I = 20mA I F = 10mA F 0.01 I F = 5mA o TA =25 C 0.001 0.01 VCE = 10V TA = 25 oC 1000 100 10 0.1 0.01 0.001 0.1 1 10 20 40 60 80 100 TA - AMBIENT TEMPERATURE (°C) I C - (mA) © 2003 Fairchild Semiconductor Corporation 0 Page 6 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 Package Dimensions (Through Hole) SL5511 Package Dimensions (Surface Mount) 0.350 (8.89) 0.330 (8.38) PIN 1 ID. 3 2 PIN 1 ID. 1 0.270 (6.86) 0.240 (6.10) SEATING PLANE 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 4 0.070 (1.78) 0.045 (1.14) 5 6 0.300 (7.62) TYP 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.115 (2.92) 0.200 (5.08) 0.165 (4.18) 0.020 (0.51) MIN 0.154 (3.90) 0.100 (2.54) 0.016 (0.41) 0.008 (0.20) 0.020 (0.51) MIN 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0° to 15° 0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX 0.300 (7.62) TYP Lead Coplanarity : 0.004 (0.10) MAX 0.100 (2.54) TYP Package Dimensions (0.4” Lead Spacing) Recommended Pad Layout for Surface Mount Leadform 0.070 (1.78) 0.270 (6.86) 0.240 (6.10) 0.060 (1.52) SEATING PLANE 0.350 (8.89) 0.330 (8.38) 0.415 (10.54) 0.070 (1.78) 0.045 (1.14) 0.100 (2.54) 0.295 (7.49) 0.030 (0.76) 0.200 (5.08) 0.135 (3.43) 0.154 (3.90) 0.100 (2.54) 0.004 (0.10) MIN 0.016 (0.40) 0.008 (0.20) 0° to 15° 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.400 (10.16) TYP Note All dimensions are in inches (millimeters) © 2003 Fairchild Semiconductor Corporation Page 7 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 SL5511 ORDERING INFORMATION Option Order Entry Identifier Description .S Surface Mount Lead Bend SD .SD Surface Mount; Tape and Reel W .W 0.4" Lead Spacing .300 VDE 0884 .300W VDE 0884, 0.4" Lead Spacing S 300 300W 3S 3SD .3S VDE 0884, Surface Mount .3SD VDE 0884, Surface Mount, Tape and Reel MARKING INFORMATION 1 SL5500 2 V XX YY K 6 3 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 Two digit year code, e.g., ‘03’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code © 2003 Fairchild Semiconductor Corporation Page 8 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 SL5511 Carrier Tape Specifications (“D” Taping Orientation) 12.0 ± 0.1 4.85 ± 0.20 4.0 ± 0.1 4.0 ± 0.1 0.30 ± 0.05 Ø1.55 ± 0.05 1.75 ± 0.10 7.5 ± 0.1 13.2 ± 0.2 9.55 ± 0.20 10.30 ± 0.20 0.1 MAX 16.0 ± 0.3 Ø1.6 ± 0.1 User Direction of Feed NOTE All dimensions are in inches (millimeters) Reflow Profile (Black Package, No Suffix) Temperature (°C) 300 215°C, 10–30 s 250 225 C peak 200 150 Time above 183°C, 60–150 sec 100 50 Ramp up = 3C/sec • Peak reflow temperature: 225°C (package surface temperature) • Time of temperature higher than 183°C for 60–150 seconds • One time soldering reflow is recommended 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) © 2003 Fairchild Semiconductor Corporation Page 9 of 10 6/30/03 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS SL5500 SL5501 SL5504 SL5511 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2003 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 10 of 10 6/30/03