FEATURES - TIGHT TOLERANCE / TIGHT STABILITY AVAILABLE - HIGH RELIABILITY FOR LOW COST - LOW PROFILE - 0.7MM PACKAGE HEIGHT - EXTENDED TEMPERATURE RANGE TO -40/+125°C AVAILABLE - EXCELLENT CLOCK SIGNAL GENERATUR FOR CPU'S - QUALIFIED FOR QUOTMOTIVE APPLICATIONS 2 Solder Pads 4 Solder Pads # 1 and 3 conected // # 2 and 4 ground FREQUENCY RANGE 12.0 ~ 40.0 MHz 40.0 ~ 90.0 MHz MODE OF VIBRATION AT-FUNDAMENTAL 3rd Overtone RESONANCE RESISTANCE 80 ~ 40 Ω max. 60 Ω max. FREQUENCY TOLERANCE AT 25°C +-5 ppm ~ +-50 ppm TEMPERATURE RANGE 0/+50°C ~ -40/+125°C +-3 ppm 0/+50°C +-5 ppm 0+50°C / -10/+60°C / 0+70°C +-10 ppm 0+50°C / -10/+60°C / 0/+70°C / -20+70°C TEMPERATURE +-15 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/85°C STABILITY +-20 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-30 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-50 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C / -40/+125°C LOAD CAPACITANCE 6 ~ 50 pF or Series SHUNT CAPACITANCE 7 pF max. DRIVE LEVEL 0.01 mW ~ 0.1 mW (optional 1.0 mW available) AGING +-2 ppm per year (optional +-1 ppm available) INSULATION RESISTANCE >500 MΩ DC/100V +-10% STORAGE TEMPERATURE -55/+125°C PACKAGE Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION MINI-SMD-CRYSTAL SERIES SMD0503/2 SMD0503/4 (standard package) PART NUMBERING SYSTEM SMD0503/4 27.000 MHz 30/50/-40+85/20pF EXAMPLE TYPE SMD0503/2 OR SMD0503/4 FREQUENCY IN MHZ FREQUENCY TOLERANCE AT 25°C REQUIRED VALUE TEMPERATURE STABILITY TEMPERATURE RANGE REQUIRED VALUE LOAD CAPACITANCE REQUIRED VALUE REQUIRED VALUE REV.01 /February 2007 http://www.petermann-technik.com | [email protected] OUTLINE DRAWING OF SMD0503 WITH 2 SLODER PADS 0.7 +-0.1 3.2 5.0 3.0 MARKING AREA 3.2 (The 2pad package is only an option. We recommend to use the 4pad package in new designs. The 4pad package is the standard package.) 2.5 1.8 1.8 2.5 Unit:mm OUTLINE DRAWING OF SMD0503 WITH 4 SLODER PADS 5.0+0.1 - #4 #3 #1 #2 0.7+0.1 - 3. 2+0.1 - Inter nal conne ctions (To p View) Reference land patt ern 1.8 #1 0.8 1.2 2.2 2.4 #2 4.0 #4 #3 1.2 3.8 Unit: mm http://www.petermann-technik.com | [email protected] REEL SPECIFICATION 1.75+0.1 - 4. 0+0.1 1.5 PULL DIRECTION +0 -1 0.3+0.1 - 5.4+0.1 - 12.0+0. - 2 5.5+0.1 - 2. 0+0.1 - 1.5 3.5+0.1 - 1.4+0.1 - +0.1 -1 8.0+0.1 - 2.0+0.5 - 60+5 - 13.0+0.2 - 180 +0 -3 21.0+0.8 - 13.0+0.3 - Unit: mm +0 16.5 -1 REFLOW SOLDER PROFILE TEMPERAT URE 260°C REF LOW 1 to 5°C/s 1TO5°C /s COOLING PREHEATIN G 10s max 150°C 1 to 9°C/s 25°C 60 200 TIME (Seconds) Crystals can be soldered according to the norm JEDEC J-STD-020C. http://www.petermann-technik.com | [email protected]