FEATURES - CHEAPEST AVAILABLE SMD-CRYSTAL IN CERAMIC PACKAGE - HIGH RELIABILITY FOR LOW COST / LARGE FREQUENCY SPECTRUM - LOW PROFILE - 1.3 MM MAX. PACKAGE HEIGHT - EXTENDED TEMPERATURE RANGE TO -40/+125°C AVAILABLE - EXCELLENT CLOCK SIGNAL GENERATUR FOR CPU'S - QUALIFIED FOR QUOTMOTIVE APPLICATIONS 2 Solder Pads 4 Solder Pads SMD0507/4 # 1 and 3 conected // # 2 and 4 ground FREQUENCY RANGE 6.0 ~ 45.0 MHz 36.0 ~ 121.0 MHz MODE OF VIBRATION AT-FUNDAMENTAL 3rd Overtone RESONANCE RESISTANCE 80 ~ 40 Ω max. 80 Ω max. FREQUENCY TOLERANCE AT 25°C +-5 ppm ~ +-50 ppm TEMPERATURE RANGE 0/+50°C ~ -40/+125°C +-3 ppm 0/+50°C +-5 ppm 0+50°C / -10/+60°C / 0/+70°C +-10 ppm 0+50°C / -10/+60°C / 0/+70°C / -20+70°C TEMPERATURE +-15 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/85°C STABILITY +-20 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-30 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-50 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C / -40/+125°C LOAD CAPACITANCE 6 ~ 50 pF or Series SHUNT CAPACITANCE 7 pF max. DRIVE LEVEL 0.01 mW ~ 0.1 mW (optional 1.0 mW available) AGING +-2 ppm per year (optional +-1 ppm available) INSULATION RESISTANCE >500 MΩ DC/100V +-10% STORAGE TEMPERATURE -55/+125°C PACKAGE Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION MINI-SMD-CRYSTAL SERIES SMD0507/2 PART NUMBERING SYSTEM SMD0507/4 27.000 MHz 30/50/-40+85/20pF EXAMPLE TYPE SMD0507/2 OR SMD0507/4 FREQUENCY IN MHZ FREQUENCY TOLERANCE AT 25°C REQUIRED VALUE TEMPERATURE STABILITY TEMPERATURE RANGE REQUIRED VALUE LOAD CAPACITANCE REQUIRED VALUE REQUIRED VALUE REV.02 / March 2008 http://www.petermann-technik.com | [email protected] MARKING AREA 5.0 OUTLINE DRAWING OF SMD0507 WITH 2 SLODER PADS 5.0 2.0 2.4 1.3max 7.0 3.0 2.2 2.2 4.5 Unit:mm PLEASE DO NOT USE THE SMD0507/2 FOR NEW DESIGNS. PLEASE ONLY USE SMD0507/4 FOR NEW DESIGNS. OUTLINE DRAWING OF SMD0507 WITH 4 SLODER PADS 7.0+0.2 - 1.3max 5.0+0.2 - TOP V IEW 6. 3 4.6 1.50 2.54 2# 3# 4# 1.00 2.54 1# 1.4 1.20 2.4 BUTTOM VIEW 2.2 Unit:mm http://www.petermann-technik.com | [email protected] REEL SPECIFICATION 7. 5+0. - 1 1.75+0 - .1 4.0+0.1 - PULL DIRECTION 0.3+0.1 - 1.5+0.1 - 7.4+0.1 - 16.0+0.2 - 2. 0+- 0.1 5. 4+- 0.1 1. 8+- 0.1 1. 7+0.1 - 8. 0+0.1 - 2. 0+0.5 - 60+5 - 13.0+0.2 - 180+3 - 21 .0+0.8 - 16.2+0 - .3 Unit: mm 20.4+0 - .1 REFLOW SOLDER PROFILE TEMPERATURE 260°C REF LOW 1 to 5°C/s 1TO5°C /s COOLING PREHEATIN G 10s max 150°C 1 to 9°C/s 25°C 60 200 TIME (Seconds) Crystals can be soldered according to the norm JEDEC J-STD-020C. http://www.petermann-technik.com | [email protected]