FEATURES - CHEAPEST AVAILABLE SMD-CRYSTAL IN CERAMIC PACKAGE - HIGH RELIABILITY FOR LOW COST - LOW PROFILE - 1.2 MM MAX. PACKAGE HEIGHT - EXTENDED TEMPERATURE RANGE TO -40/+125°C AVAILABLE - EXCELLENT CLOCK SIGNAL GENERATUR FOR CPU'S - QUALIFIED FOR QUOTMOTIVE APPLICATIONS SMD0603/2 MINI-SMD-CRYSTALS SERIES SMD0603/4 2 Solder Pads (do not use for new designs) 4 Solder Pads (please use 4pad crystal - available) # 1 and 3 conected // # 2 and 4 ground FREQUENCY RANGE 8.0 ~ 48.0 MHz 32.0 ~ 121.0 MHz MODE OF VIBRATION AT-FUNDAMENTAL 3rd Overtone RESONANCE RESISTANCE 80 ~ 40 Ω max. 80 Ω max. FREQUENCY TOLERANCE AT 25°C +-5 ppm ~ +-50 ppm TEMPERATURE RANGE 0/+50°C ~ -40/+125°C +-3 ppm 0/+50°C +-5 ppm 0+50°C / -10/+60°C / -20/+70°C +-10 ppm 0+50°C / -10/+60°C / 0/+70°C / -20+70°C / -40/+85°C TEMPERATURE +-15 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/85°C STABILITY +-20 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-30 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-50 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C / -40/+125°C LOAD CAPACITANCE 6 ~ 50 pF or Series SHUNT CAPACITANCE 7 pF max. DRIVE LEVEL 0.01 mW ~ 0.1 mW (optional 1.0 mW available) AGING +-2 ppm per year (optional +-1 ppm available) INSULATION RESISTANCE >500 MΩ DC/100V +-10% STORAGE TEMPERATURE -55/+125°C PACKAGE Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION PART NUMBERING SYSTEM SMD0603/4 27.000 MHz 30/50/-40+85/20pF EXAMPLE TYPE SMD0603/4 FREQUENCY IN MHZ FREQUENCY TOLERANCE AT 25°C REQUIRED VALUE TEMPERATURE STABILITY TEMPERATURE RANGE REQUIRED VALUE LOAD CAPACITANCE REQUIRED VALUE REQUIRED VALUE REV.02 / July 2008 http://www.petermann-technik.com | [email protected] OUTLINE DRAWING OF SMD0603 WITH 2 SLODER PADS (please do not use 2pad package for new designs – will become obsolete) 6.0+ - 0.2 3. 5+0.2 - #1 1. 1max In ternal con nections (Top View) Reference land patt ern 1.6 #2 3.5 2.4 BOTTOM VIEW 2.9 3. 0 Unit: mm OUTLINE DRAWING OF SMD0603 WITH 4 SLODER PADS (please use the standard 4pad package – it is always available) 6.0+ - 0.2 #4 #3 #1 #2 1. 0+0.2 - 3.5+0.2 - In ternal con nections (Top View) Reference land patt ern 1.8 #1 1.4 0. 9 1.5 2.4 2.4 #2 4.4 #4 1. 4 3. 0 4.4 #3 Unit: mm http://www.petermann-technik.com | [email protected] REEL SPECIFICATION 7. 5+0.1 1. 75+0.1 - 4. 0+0.1 1.5 PULL D IRECTION +0. 1 -1 0.3+0. - 1 6.4+0.1 - 16.0+0.2 - 2. 0+0.1 - 3.9+0.1 - 1. 4+0.1 - 1. 5+- 0.1 8. 0+0.1 - 2.0+0.5 - 60+5 - 13.0+0 - .2 180 +0 -3 21.0+0.8 - 16 .2+0.3 - Unit: mm 20.4+0.1 - REFLOW SOLDER PROFILE TEMPERATURE 260°C REF LOW 1 to 5°C/s 1TO5°C /s COOLING PREHEATIN G 10s max 150°C 1 to 9°C/s 25°C 60 200 TIME (Seconds) Crystals can be soldered according to the norm JEDEC J-STD-020C. http://www.petermann-technik.com | [email protected]