FEATURES - SMALLEST AVAILABLE SMD-CRYSTAL IN CERAMIC PACKAGE - HIGH RELIABILITY FOR LOW COST - LOW PROFILE - 0.6 MM MAX. PACKAGE HEIGHT - EXTENDED TEMPERATURE RANGE TO -40/+125°C AVAILABLE - DESIGNED FOR THE USE IN MOBILE COMMUNICATION, AUTOMOTIVE, ETC. - TIGHT TOLERANCES AND STABILITIES AVAILABLE SMD03025/4 12.0 ~ 50.0 MHz (AT-FUNDAMENTAL) 12.000 / 13.000 / 14.7456 / 16.000 / 16.384 / 19.000 / 19.200 STANDARD FREQUENCIES IN MHz 20.000 / 25.000 / 26.000 / 27.000 / 30.000 / 36.000 40.000 / 48.000 / 50.000 MHz RESONANCE RESISTANCE 12 MHz = <100 Ω / 13 - 19.2 MHz = <80 Ω / 20 - 48 MHz = <50 Ω FREQUENCY TOLERANCE AT 25°C +-5 ppm ~ +-50 ppm TEMPERATURE RANGE 0/+50°C ~ -40/+125°C +-3 ppm 0/+50°C +-5 ppm 0+50°C / -10/+60°C / -20/+70°C +-10 ppm 0+50°C / -10/+60°C / 0/+70°C / -20+70°C / -40/+85°C TEMPERATURE +-15 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/85°C STABILITY +-20 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-30 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-50 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C / -40/+125°C LOAD CAPACITANCE 6 ~ 50 pF or Series SHUNT CAPACITANCE 7 pF max. DRIVE LEVEL 0.01 mW ~ 0.1 mW (optional 1.0 mW available) AGING +-2 ppm per year (optional +-1 ppm available) INSULATION RESISTANCE >500 MΩ DC/100V +-10% STORAGE TEMPERATURE -55/+125°C PACKAGE Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION MINI-SMD-CRYSTAL SERIES FREQUENCY RANGE PART NUMBERING SYSTEM SMD03025/4 26.000 MHz 10/10/0+70/12pF EXAMPLE TYPE SMD03025/4 FREQUENCY IN MHZ FREQUENCY TOLERANCE AT 25°C REQUIRED VALUE TEMPERATURE STABILITY TEMPERATURE RANGE REQUIRED VALUE LOAD CAPACITANCE REQUIRED VALUE REQUIRED VALUE REV.03 / February 2010 http://www.petermann-technik.com | [email protected] OUTLINE DRAWING OF SMD03025/4 3.2+0 - .1 #3 #1 #2 0.6+0.1 - 2 .5+0.1 - Intern al connection s (Top View) #4 #4 Re ference lan d patte rn 0.8 1.2 1.6 1.6 #3 #1 2.2 #2 0.9 1.4 2.2 Un it: m m REFLOW SOLDER PROFILE REF LOW TEMPERAT URE 260°C 1TO5°C /s 1 to 5°C/s PREHEAT IN G 150°C COOLING 10s max 1 to 9°C/s 25°C 60 200 TIME (Seconds) Crystals can be soldered according to the norm JEDEC J-STD-020C. REEL SPECIFICATION 3.5+0.1 1. 75+0 - .1 4. 0+0.1 1.5+0.1 - PULL DIRECTION 0.25+0.1 - 3.5+0.1 - 8. 0+0.2 - 2.0+- 0.1 2.8+- 0.1 1.0+- 0.1 1.15+0.1 - 4.0+0.1 2.0+0.5 - 60+5 - 13.0+0.2 - 180+3 - 21 .0+0.8 - 9.0+0.3 - Unit: mm 12.4+0 - .1 http://www.petermann-technik.com | [email protected]