Data Sheet SML-Z1 series Actual size 3528(1411) 3.5×2.8mm(t=1.9mm) Features ・High brightness Color Type ・20/50mA guaranteed specifications ・PLCC2 package V U D Y M F P E B WB Specifications Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Min.*2 Typ. Max.*2 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Part No. ■ SML-Z14VT(A) 625 630 635 56 112 615 620 625 112 224 602 605 608 140 280 586 589 592 568 571 574 Red ■ SML-Z14UT(A) 168 ■ SML-Z14DT(A) Orange ■ SML-Z14YT(A) Yellow ■ SML-Z14MT(A) Yellowish Green 1.9 70 200＊1 12 -40 to +100 -40 to +100 20 175 ■ SML-Z14FT(A) 10 12 20 20 45 90 22.4 45 22.4 2.0 561.5 564 566.5 Green ■ SML-Z14PT(A) 557 560 563 11.2 625 630 635 140 280 615 620 625 280 560 602 605 608 355 710 587 590 593 569 572 575 112 224 562 565 568 71 120 558 561 564 22.4 56 519 528 536 710 1,100 464 470 476 AIGaInP ■ SML-Z14V4T Red ■ SML-Z14U4T 2.0 ■ SML-Z14D4T Orange ■ SML-Z14Y4T Yellow ■ SML-Z14M4T Yellowish Green 189 70 200 ＊1 12 -40 to +100 -40 to +100 50 100 12 50 50 2.1 ■ SML-Z14F4T Green ■ SML-Z14P4T ■ SMLZ14EGT(A) Bluish Green ■ SMLZ14BGT(A) Blue 120 30 100＊2 3.3 5 -40 to +100 -40 to +100 20 10 5 20 3.2 ■ SMLZ14WBGAW(A) ■ SMLZ14WBGBW(A) 20 140 280 (x, y) (0.36, 0.36) InGaN 900 1,400 114 White ■ SMLZ14WBGCW(A) 30 100 ＊2 (x, y) (0.44, 0.40) 5 -40 to +100 -40 to +100 3.3 20 100 5 20 20 (x, y) (0.30, 0.28) 1,400 2,200 ■ SMLZ14WBGDW(A) (x, y) (0.34, 0.34) ＊1:Duty1/10, 1kHz ＊2:Duty1/5, 200Hz ＊3:Reference Dimensions Recommended Solder Pattern Viewing Angle SML-Z1 series 3.5 3.2 φ2.4 1.8 2.6 2.8 SML-Z14x4T series / SML-Z14(A) series X 20° Y 10° 0° 30° 10° Y’ 1.9 X 30° 90° 100 80° 50 0 50 RELATIVEINTENSITY INTENSITY (%)(%) RELATIVE Tolerance : ±0.2 (unit : mm) www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 10° 20° 30° 40° 50° 60° 60° 70° 80° 0° 50° 60° 60° 10° 30° 40° Y’ 50° 70° 1.5 20° Y 40° 50° 1.5 SCANNINGANGLE ANGLE (deg) SCANNING (deg) X’ 20° 40° Cathode Index SMLZ14 series SCANNINGANGLE ANGLE (deg) SCANNING (deg) X’ 1.5 90° 100 70° 70° 80° 80° 90° 100 50 0 50 RELATIVEINTENSITY INTENSITY (%)(%) RELATIVE (unit : mm) 1/4 2012.11 - Rev.B 90° 100 SML-Z1 Series Electrical Characteristics Curves Forward Current-Forward Voltage ■ 10 1.4 1.6 1.8 2.0 2.2 ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) ■ ■ 10 1.4 2.4 FORWARD VOLTAGE ：VF (V) Ta=25°C 100 1.6 1.8 2.0 2.2 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T Ta=25°C 100 FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) ■ FORWARD CURRENT：IF (mA) Ta=25°C 100 ■ ■SMLZ14EGT(A) ■SMLZ14BGT(A) ■ SMLZ14WBGAW(A) ■ SMLZ14WBGBW(A) ■ SMLZ14WBGCW(A) ■ SMLZ14WBGDW(A) 10 1 2.5 2.4 ■ FORWARD VOLTAGE：VF (V) 3.0 3.5 4.0 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature 1.4 1.2 ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) 1.0 0.8 0.6 0.4 IF=50mA 1.6 0.2 -40 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) ■ 1.4 1.2 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T 1.0 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 80 IF=20mA 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) ■ RELATIVE LUMINOUS INTENSITY (a.u.) IF=20mA 1.6 ■SMLZ14EGT(A) ■SMLZ14BGT(A) ■ SMLZ14WBGAW(A) ■ SMLZ14WBGBW(A) ■ SMLZ14WBGCW(A) ■ SMLZ14WBGDW(A) 1.4 1.2 1.0 0.8 0.6 0.4 -40 100 ■ ATMOSPHERE TEMPERATURE：Ta (°C) -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current ■ 3.0 ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) 2.0 1.0 0 0 10 20 30 40 50 60 Ta=25°C 1.5 ■ 1.0 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T 0.5 0 0 70 ■ FORWARD CURRENT：IF (mA) Ta=25°C 1.5 RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) ■ RELATIVE LUMINOUS INTENSITY (a.u.) Ta=25°C 4.0 ■ ■ 1.0 ■SMLZ14EGT(A) ■SMLZ14BGT(A) ■ SMLZ14WBGAW(A) ■ SMLZ14WBGBW(A) ■ SMLZ14WBGCW(A) ■ SMLZ14WBGDW(A) 0.5 0 10 20 30 40 50 60 0 70 5 10 15 20 25 30 FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) Derating 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. ■ 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) 2/4 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T ■ MAXIMUM FORWARD CURRENT：IF (mA) 70 ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) MAXIMUM FORWARD CURRENT：IF (mA) MAXIMUM FORWARD CURRENT：IF (mA) ■ 80 40 ■ 30 ■SMLZ14EGT(A) ■SMLZ14BGT(A) ■ SMLZ14WBGAW(A) ■ SMLZ14WBGBW(A) ■ SMLZ14WBGCW(A) ■ SMLZ14WBGDW(A) 20 10 0 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE：Ta (°C) 2012.11 - Rev.B SML-Z1 Series Rank Reference of Brightness Red (V, U) Package structure Package Height size (mm) PLCC2 3528 Luminous Intensity (mcd) IF(mA) AM AN AP AQ AR AS AT AU AV AW AX AY AZ BA BB BC BD BE 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 SML-Z14VT(A) 20 SML-Z14V4T SML-Z14UT(A) 1.9 50 SML-Z14U4T Orange (D) Package structure Package Height size (mm) PLCC2 3528 1.9 Luminous Intensity (mcd) IF(mA) 20 50 AM AN AP AQ AR AS AT AU AV AW AX AY AZ BA BB BC BD BE 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 SML-Z14DT(A) SML-Z14D4T Yellow (Y) Package structure Package Height size (mm) PLCC2 3528 1.9 Luminous Intensity (mcd) IF(mA) 20 50 AM AN AP AQ AR AS AT AU AV AW AX AY AZ BA BB BC BD BE 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 SML-Z14YT(A) SML-Z14Y4T Green (M, P, F) Package structure Package Height size (mm) Luminous Intensity (mcd) IF(mA) AG AH AJ AK AL AM AN AP AQ AR AS AT AU AV AW AX AY AZ 9 to 11.2 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 SML-Z14MT(A) SML-Z14PT(A) 20 PLCC2 3528 SML-Z14FT(A) 1.9 SML-Z14M4T 50 SML-Z14P4T SML-Z14F4T Bluish-Green (E) Package structure Package Height size (mm) PLCC2 3528 1.9 Luminous Intensity (mcd) IF(mA) 20 S1 S2 T1 T2 U1 U2 V1 V2 W1 W2 X1 X2 Y1 Y2 Z1 Z2 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 360 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 2800 to 3600 SMLZ14EGT(A) Blue (B) Package structure Package Height size (mm) PLCC2 3528 1.9 Luminous Intensity (mcd) IF(mA) 20 S1 S2 T1 T2 U1 U2 V1 V2 W1 W2 X1 X2 Y1 Y2 Z1 Z2 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 360 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 2800 to 3600 SMLZ14BGT(A) White (WB) Package structure Package Height size (mm) PLCC2 3528 1.9 Luminous Intensity (mcd) IF(mA) S1 S2 T1 T2 U1 U2 V1 V2 W1 W2 X1 X2 Y1 Y2 Z1 Z2 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 360 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 2800 to 3600 SMLZ14WBGAW(A) SMLZ14WBGBW(A) SMLZ14WBGCW(A) SMLZ14WBGDW(A) 20 ＊Please note that the brightness of some products may fall between ranks (half rank). www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 3/4 2012.11 - Rev.B SML-Z1 Series Part No. Construction ∗ “−” will be taken out for emitting color W/B/E series and pastel color. S M L Z 1 4 Series name Package name 3 4 8 Rank sign (Chromaticity Rank)∗ (for white LED and pastel color) Dice classification code Y 4 T Chip Type High Brightness Type Ultra High Brightness Type Emitting Color Resin Color T 8 6 Taping Specifications P Rank sign (Brightness Rank)∗ V Red:630nm T Transparent Colorless U T86 Cathode at sprocket hole side Red:620nm D MilkyWhite Orange:605nm W T87 Anode at sprochet hole side Y Yellow:590(589)nm M Yellowish-Green:572(571)nm F Green:565(564)nm P Green:561(560)nm E Bluish-Green:528nm B Blue:470nm 1 For white LED and pastel color cathode at sprocket hole side WB White CB Ice blue GB Blue green PB Pure green SB Sapphire blue ∗ Concerning the rank sign. • Please refer to the rank chart above for luminous intensity classification. • Please refer to specification sheet for color classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 4/4 2012.11 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1102A