SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 D D 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers PNP Inputs Reduce DC Loading Hysteresis at Inputs Improves Noise Margins SN54LS’, SN54S’ . . . J OR W PACKAGE SN74LS240, SN74LS244 . . . DB, DW, N, OR NS PACKAGE SN74LS241 . . . DW, N, OR NS PACKAGE SN74S’ . . . DW OR N PACKAGE (TOP VIEW) 1G 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND description 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC 2G/2G† 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 † 2G for ’LS241 and ’S241 or 2G for all other drivers. † SN54LS’, SN54S’ . . . FK PACKAGE (TOP VIEW) 2Y4 1A1 1G VCC These octal buffers and line drivers are designed specifically to improve both the performance and density of three-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The designer has a choice of selected combinations of inverting and noninverting outputs, symmetrical, active-low output-control (G) inputs, and complementary output-control (G and G) inputs. These devices feature high fan-out, improved fan-in, and 400-mV noise margin. The SN74LS’ and SN74S’ devices can be used to drive terminated lines down to 133 Ω. 1 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y1 2A4 1Y2 2A3 1Y3 2Y1 GND 2A1 1Y4 2A2 1A2 2Y3 1A3 2Y2 1A4 2G/2G D † 2G for ’LS241 and ’S241 or 2G for all other drivers. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 ORDERING INFORMATION PACKAGE† TA PDIP – N 0°C to 70°C SOIC – DW SOP – NS SSOP – DB Tube ORDERABLE PART NUMBER SN74LS240N SN74LS240N SN74LS241N SN74LS241N SN74LS244N SN74LS244N SN74S240N SN74S240N SN74S241N SN74S241N SN74S244N SN74S244N Tube SN74LS240DW Tape and reel SN74LS240DWR Tube SN74LS241DW Tape and reel SN74LS241DWR Tube SN74LS244DW Tape and reel SN74LS244DWR Tube SN74S240DW Tape and reel SN74S240DWR Tube SN74S241DW Tape and reel SN74S241DWR Tube SN74S244DW Tape and reel SN74S244DWR Tube Tape and reel TOP-SIDE MARKING LS240 LS241 LS244 S240 S241 S244 SN74LS240NSR 74LS240 SN74LS241NSR 74LS241 SN74LS244NSR 74LS244 SN74LS240DBR LS240 LS244 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 2 POST OFFICE BOX 655303 SN74LS244DBR • DALLAS, TEXAS 75265 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 ORDERING INFORMATION (CONTINUED) PACKAGE† TA CDIP – J Tube –55°C 55°C to 125°C CFP – W LCCC – FK Tube Tube ORDERABLE PART NUMBER TOP-SIDE MARKING SN54LS240J SN54LS240J SNJ54LS240J SNJ54LS240J SN54LS241J SN54LS241J SNJ54LS241J SNJ54LS241J SN54LS244J SN54LS244J SNJ54LS244J SNJ54LS244J SN54S240J SN54S240J SNJ54S240J SNJ54S240J SN54S241J SN54S241J SNJ54S241J SNJ54S241J SN54S244J SN54S244J SNJ54S244J SNJ54S244J SNJ54LS240W SNJ54LS240W SNJ54LS241W SNJ54LS241W SNJ54LS244W SNJ54LS244W SNJ54S240W SNJ54S240W SNJ54S241W SNJ54S241W SNJ54S244W SNJ54S244W SNJ54LS240FK SNJ54LS240FK SNJ54LS241FK SNJ54LS241FK SNJ54LS244FK SNJ54LS244FK SNJ54S240FK SNJ54S240FK SNJ54S241FK SNJ54S241FK SNJ54S244FK SNJ54S244FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 schematics of inputs and outputs ’LS240, ’LS241, ’LS244 ’S240, ’S241, ’S244 EQUIVALENT OF EACH INPUT EQUIVALENT OF EACH INPUT VCC VCC Req 9 kΩ NOM Input Input G and G inputs: Req = 2 kΩ NOM A inputs: Req = 2.8 kΩ NOM TYPICAL OF ALL OUTPUTS VCC R Output GND ’LS240. ’LS241, ’LS244: R = 50 Ω NOM ’S240, ‘S241, S244: R = 25 Ω NOM 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 logic diagram ’LS240, ’S240 1G 1A1 1A2 1A3 1A4 2G 2A1 2A2 2A3 2A4 ’LS241, ’S241 1 1G 2 18 1Y1 1A1 4 16 1Y2 1A2 6 14 1Y3 1A3 8 12 1Y4 1A4 19 2G 11 9 13 7 15 5 17 3 2Y1 2A1 2Y2 2A2 2Y3 2A3 2Y4 2A4 1 2 18 4 16 6 14 8 12 1Y1 1Y2 1Y3 1Y4 19 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 ’LS244, ’S244 1G 1A1 1A2 1A3 1A4 2G 2A1 2A2 2A3 2A4 1 2 18 4 16 6 14 8 12 1Y1 1Y2 1Y3 1Y4 19 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 Pin numbers shown are for DB, DW, J, N, NS, and W packages. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI: ’LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V ’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Off-state output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Package thermal impedance, θJA (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to network ground terminal. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions SN54LS’ NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage (see Note 1) VIL IOH Low-level input voltage 0.7 0.8 V High-level output current –12 –15 mA IOL TA Low-level output current 12 24 mA 70 °C High-level input voltage 2 Operating free-air temperature –55 NOTE 1: Voltage values are with respect to network ground terminal. 6 SN74LS’ MIN POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2 125 0 V V SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS† PARAMETER VIK Hysteresis (VT+ – VT–) VCC = MIN, MIN SN54LS’ TYP‡ MAX II = –18 mA MIN SN74LS’ TYP‡ MAX –1.5 VCC = MIN –1.5 0.2 0.4 0.2 0.4 3.4 2.4 3.4 UNIT V V VCC = MIN, IOH = –3 mA VIH = 2 V, VIL = MAX, 2.4 VCC = MIN, IOH = MAX VIH = 2 V, VIL = 0.5 V, 2 VOL VCC = MIN,, VIL = MAX VIH = 2 V,, IOL = 12 mA IOL = 24 mA 0.4 IOZH VCC = MAX, VIL = MAX VIH = 2 V, VO = 2.7 V 20 20 µA IOZL VCC = MAX, VIL = MAX VIH = 2 V, VO = 0.4 V –20 –20 µA II IIH VCC = MAX, VCC = MAX, VI = 7 V VI = 2.7 V 0.1 0.1 mA 20 20 µA IIL IOS§ VCC = MAX, VCC = MAX, VIL = 0.4 V –0.2 mA –225 mA VOH V 2 0.5 –0.2 –40 Outputs high 0.4 –225 –40 All 17 27 17 27 ’LS240 26 44 26 44 ’LS241, ’LS244 27 46 27 46 ’LS240 29 50 29 50 ’LS241, ’LS244 32 54 32 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ All typical values are at VCC = 5 V, TA = 25°C. § Not more than one output should be shorted at a time, and duration of the short-circuit should not exceed one second. 54 VCC = MAX, MAX Out ut open o en Output ICC Outputs low Outputs Out uts disabled V mA switching characteristics, VCC = 5 V, TA = 25°C (see Figure 1) PARAMETER ’LS240 TEST CONDITIONS MIN tPLH tPHL RL = 667 Ω Ω, CL = 45 pF tPZL tPZH RL = 667 Ω Ω, CL = 45 pF F tPLZ tPHZ Ω RL = 667 Ω, CL = 5 pF POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 ’LS241, ’LS244 TYP MAX 9 MIN TYP MAX 14 12 18 12 18 12 18 20 30 20 30 15 23 15 23 10 20 10 20 15 25 15 25 UNIT ns ns ns 7 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 recommended operating conditions SN54S’ SN74S’ MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 UNIT VCC VIH Supply voltage (see Note 1) VIL IOH Low-level input voltage 0.8 0.8 V High-level output current –12 –15 mA IOL Low-level output current 48 64 mA High-level input voltage 2 2 V V External resistance between any input and VCC or ground 40 40 kΩ TA Operating free-air temperature (see Note 3) –55 125 0 70 °C NOTES: 1. Voltage values are with respect to network ground terminal. 3. An SN54S241J operating at free-air temperature above 116°C requires a heat sink that provides a thermal resistance from case to free air, RθCA, of not more that 40°C/W. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) VIK Hysteresis (VT+ – VT–) SN54S’ MIN TYP‡ TEST CONDITIONS† PARAMETER VCC = MIN, II = –18 mA MAX SN74S’ MIN TYP‡ –1.2 VCC = MIN 0.2 0.4 MAX –1.2 0.2 V 0.4 V 3.4 V VCC = MIN IOH = –1 mA VIH = 2 V, VIL = 0.8 V, VCC = MIN, IOH = –3 mA VIH = 2 V, VIL = 0.8 V, 2.4 VCC = MIN, IOH = MAX VIH = 2 V, VIL = 0.5 V, 2 VOL VCC = MIN, IOL = MAX VIH = 2 V, VIL = 0.8 V, 0.55 0.55 V IOZH VCC = MAX, VIL = 0.8 V VIH = 2 V, VO = 2.4 V 50 50 µA IOZL VCC = MAX, VIL = 0.8 V VIH = 2 V, VO = 0.5 V –50 –50 µA II IIH VCC = MAX, VCC = MAX, VI = 5.5 V VI = 2.7 V VOH IIL VCC = MAX MAX, IOS§ VCC = MAX 5V VI = 0 0.5 2.7 3.4 2.4 2 Any A Any G 1 1 mA 50 50 µA –400 –400 µA –2 mA –225 mA –2 –50 –225 –50 ’S240 80 123 80 135 ’S241,’S244 95 147 95 160 ’S240 100 145 100 150 ’S241, ’S244 120 170 120 180 ’S240 100 145 100 150 ’S241, ’S244 120 170 120 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ All typical values are at VCC = 5 V, TA = 25°C. § Not more than one output should be shorted at a time, and duration of the short-circuit should not exceed one second. 180 Outputs high ICC VCC = MAX,, Output open Outputs low Outputs Out uts disabled 8 UNIT POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 mA SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 switching characteristics, VCC = 5 V, TA = 25°C (see Figure 2) PARAMETER ’S240 TEST CONDITIONS MIN tPLH tPHL RL = 90 Ω Ω, CL = 50 pF F tPZL tPZH RL = 90 Ω Ω, CL = 50 pF F tPLZ tPHZ RL = 90 Ω Ω, CL = 5 pF POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 ’S241, ’S244 TYP MAX 4.5 4.5 MIN TYP MAX 7 6 9 7 6 9 10 15 10 15 6.5 10 8 12 10 15 10 15 6 9 6 9 UNIT ns ns ns 9 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 PARAMETER MEASUREMENT INFORMATION SERIES 54LS/74LS DEVICES VCC Test Point VCC RL From Output Under Test CL (see Note A) CL (see Note A) High-Level Pulse 1.3 V S2 LOAD CIRCUIT FOR 3-STATE OUTPUTS 3V Timing Input 1.3 V 5 kΩ Test Point LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS LOAD CIRCUIT FOR 2-STATE TOTEM-POLE OUTPUTS S1 (see Note B) CL (see Note A) RL (see Note B) RL From Output Under Test VCC From Output Under Test Test Point 1.3 V 0V tw Low-Level Pulse 1.3 V tsu Data Input 1.3 V VOLTAGE WAVEFORMS PULSE DURATIONS 1.3 V 1.3 V Output Control (low-level enabling) 0V tPLH In-Phase Output (see Note D) 1.3 V 0V 3V 1.3 V 1.3 V 0V tPZL tPLZ tPHL VOH 1.3 V 1.3 V Waveform 1 (see Notes C and D) VOL tPZH tPLH VOH 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES ≈1.5 V 1.3 V VOL tPHL Out-of-Phase Output (see Note D) 3V 1.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 3V Input th Waveform 2 (see Notes C and D) VOL + 0.3 V tPHZ VOH 1.3 V VOH – 0.3 V ≈1.5 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. All diodes are 1N3064 or equivalent. C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. D. S1 and S2 are closed for tPLH, tPHL, tPHZ, and tPLZ; S1 is open and S2 is closed for tPZH; S1 is closed and S2 is open for tPZL. E. Phase relationships between inputs and outputs have been chosen arbitrarily for these examples. F. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω, tr ≤ 15 ns, tf ≤ 6 ns. G. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuits and Voltage Waveforms 10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 PARAMETER MEASUREMENT INFORMATION SERIES 54S/74S DEVICES VCC Test Point VCC RL (see Note B) From Output Under Test CL (see Note A) High-Level Pulse 1.5 V S2 LOAD CIRCUIT FOR 3-STATE OUTPUTS 3V Timing Input 1.5 V 1 kΩ Test Point LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS LOAD CIRCUIT FOR 2-STATE TOTEM-POLE OUTPUTS S1 (see Note B) CL (see Note A) RL CL (see Note A) RL From Output Under Test VCC From Output Under Test Test Point 1.5 V 0V tw Low-Level Pulse 1.5 V tsu 0V In-Phase Output (see Note D) tPHL VOH 1.5 V Out-of-Phase Output (see Note D) 1.5 V 3V 1.5 V Waveform 1 (see Notes C and D) tPLZ VOH 1.5 V 1.5 V VOL VOL Waveform 2 (see Notes C and D) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES ≈1.5 V 1.5 V tPZH tPLH 1.5 V 0V tPZL VOL tPHL 1.5 V 0V Output Control (low-level enabling) 1.5 V tPLH 1.5 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 3V 1.5 V 3V Data Input 1.5 V VOLTAGE WAVEFORMS PULSE DURATIONS Input th VOL + 0.5 V tPHZ VOH 1.5 V VOH – 0.5 V ≈1.5 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. All diodes are 1N3064 or equivalent. C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. D. S1 and S2 are closed for tPLH, tPHL, tPHZ, and tPLZ; S1 is open and S2 is closed for tPZH; S1 is closed and S2 is open for tPZL. E. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω; tr and tf ≤ 7 ns for Series 54/74 devices and tr and tf ≤ 2.5 ns for Series 54S/74S devices. F. The outputs are measured one at a time with one input transition per measurement. Figure 2. Load Circuits and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11 SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS SDLS144B – APRIL 1985 – REVISED FEBRUARY 2002 APPLICATION INFORMATION 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type 5962-7801201VRA ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type 5962-7801201VSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type 7705701RA ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type 7705701SA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type 78012012A ACTIVE LCCC FK 20 1 TBD 7801201RA ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type 7801201SA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type JM38510/32401B2A ACTIVE LCCC FK 20 1 TBD JM38510/32401BRA ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type JM38510/32401BSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type JM38510/32402B2A ACTIVE LCCC FK 20 1 TBD JM38510/32402BRA ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type JM38510/32402BSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type JM38510/32403B2A ACTIVE LCCC FK 20 1 TBD JM38510/32403BRA ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type JM38510/32403BSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type JM38510/32403SRA ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type JM38510/32403SSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type SN54LS240J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SN54LS241J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SN54LS244J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SN54S240J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SN54S241J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SN54S244J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SN74LS240DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS240DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS240DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS240DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS240DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Package Drawing Pins Package Eco Plan (2) Qty SN74LS240J OBSOLETE CDIP J 20 SN74LS240N ACTIVE PDIP N 20 SN74LS240N3 OBSOLETE PDIP N 20 SN74LS240NE4 ACTIVE PDIP N 20 SN74LS240NSR ACTIVE SO NS 20 SN74LS240NSRE4 ACTIVE SO NS SN74LS240NSRG4 ACTIVE SO NS Lead/Ball Finish MSL Peak Temp (3) POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type TBD Call TI Pb-Free (RoHS) CU NIPDAU TBD Call TI Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 20 2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM 20 20 Addendum-Page 1 Call TI N / A for Pkg Type Call TI PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74LS241DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS241DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS241DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS241DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS241DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS241DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) SN74LS241J OBSOLETE CDIP J 20 SN74LS241N ACTIVE PDIP N 20 TBD Call TI 20 Pb-Free (RoHS) CU NIPDAU Call TI TBD Call TI 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type N / A for Pkg Type SN74LS241N3 OBSOLETE PDIP N 20 SN74LS241NE4 ACTIVE PDIP N 20 SN74LS241NSR ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS241NSRE4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS241NSRG4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DBR ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DBRE4 ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DBRG4 ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244J OBSOLETE CDIP J 20 SN74LS244N ACTIVE PDIP N 20 SN74LS244N3 OBSOLETE PDIP N 20 SN74LS244NE4 ACTIVE PDIP N 20 SN74LS244NSR ACTIVE SO NS 20 20 20 TBD Call TI Pb-Free (RoHS) CU NIPDAU TBD Call TI Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type CU NIPDAU Level-1-260C-UNLIM 2000 Green (RoHS & no Sb/Br) Addendum-Page 2 Call TI Call TI N / A for Pkg Type Call TI PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74LS244NSRE4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS244NSRG4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S240DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S240DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S240DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S240DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S240DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S240DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S240N ACTIVE PDIP N 20 CU NIPDAU N / A for Pkg Type 20 Pb-Free (RoHS) Lead/Ball Finish MSL Peak Temp (3) SN74S240N3 OBSOLETE PDIP N 20 TBD Call TI SN74S240NE4 ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU Call TI N / A for Pkg Type SN74S241DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S241DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S241DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S241DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S241DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S241DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S241J OBSOLETE CDIP J 20 SN74S241N ACTIVE PDIP N 20 SN74S241N3 OBSOLETE PDIP N 20 SN74S241NE4 ACTIVE PDIP N 20 SN74S244DW ACTIVE SOIC DW SN74S244DWE4 ACTIVE SOIC SN74S244DWG4 ACTIVE SN74S244DWR TBD Call TI Pb-Free (RoHS) CU NIPDAU TBD Call TI 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S244DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74S244DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 20 Addendum-Page 3 Call TI N / A for Pkg Type Call TI PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74S244J OBSOLETE CDIP J 20 SN74S244N ACTIVE PDIP N 20 Lead/Ball Finish TBD Call TI 20 Pb-Free (RoHS) CU NIPDAU MSL Peak Temp (3) Call TI N / A for Pkg Type SN74S244N3 OBSOLETE PDIP N 20 TBD Call TI SN74S244NE4 ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU Call TI SNJ54LS240FK ACTIVE LCCC FK 20 1 TBD SNJ54LS240J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SNJ54LS240W ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type SNJ54LS241FK ACTIVE LCCC FK 20 1 TBD SNJ54LS241J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SNJ54LS241W ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type SNJ54LS244FK ACTIVE LCCC FK 20 1 TBD SNJ54LS244J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SNJ54LS244W ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type SNJ54S240FK ACTIVE LCCC FK 20 1 TBD SNJ54S240J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SNJ54S240W ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type SNJ54S241FK ACTIVE LCCC FK 20 1 TBD N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type SNJ54S241J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SNJ54S241W ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type SNJ54S244FK ACTIVE LCCC FK 20 1 TBD SNJ54S244J ACTIVE CDIP J 20 1 TBD A42 SNPB N / A for Pkg Type SNJ54S244W ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type POST-PLATE N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on Addendum-Page 4 PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 28-Feb-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74LS240DWR Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SOIC DW 20 2000 330.0 24.0 11.0 13.0 3.0 12.0 24.0 Q1 SN74LS241DWR SOIC DW 20 2000 330.0 24.0 11.0 13.0 3.0 12.0 24.0 Q1 SN74LS244DBR SSOP DB 20 2000 330.0 16.0 8.0 8.0 3.0 12.0 16.0 Q1 SN74LS244DWR SOIC DW 20 2000 330.0 24.0 11.0 13.0 3.0 12.0 24.0 Q1 SN74S240DWR SOIC DW 20 2000 330.0 24.0 11.0 13.0 3.0 12.0 24.0 Q1 SN74S241DWR SOIC DW 20 2000 330.0 24.0 11.0 13.0 3.0 12.0 24.0 Q1 SN74S244DWR SOIC DW 20 2000 330.0 24.0 11.0 13.0 3.0 12.0 24.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 28-Feb-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LS240DWR SOIC DW 20 2000 346.0 346.0 41.0 SN74LS241DWR SOIC DW 20 2000 346.0 346.0 41.0 SN74LS244DBR SSOP DB 20 2000 346.0 346.0 33.0 SN74LS244DWR SOIC DW 20 2000 346.0 346.0 41.0 SN74S240DWR SOIC DW 20 2000 346.0 346.0 41.0 SN74S241DWR SOIC DW 20 2000 346.0 346.0 41.0 SN74S244DWR SOIC DW 20 2000 346.0 346.0 41.0 Pack Materials-Page 2 MECHANICAL DATA MLCC006B – OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee® Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2008, Texas Instruments Incorporated