3 14 4 13 5 12 6 11 7 10 8 9 VCC 1D 1Y 1Z DE 2Z 2Y 2D 1B 1A 1R 1DE 2R 2A 2B GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 1D 1Y 1Z 2DE 2Z 2Y 2D 1A 1R RE 2R 2A 2B VCC SN65C1167E . . . RGY PACKAGE (TOP VIEW) 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 1D 1Y 1Z DE 2Z 2Y 9 2D SN65C1168E drivers have individual active-high enables. 15 GND The SN65C1167E combines dual 3-state differential line drivers and 3-state differential line receivers, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can be connected together externally to function as direction control. 16 2 SN65C1168E . . . NS OR PW PACKAGE (TOP VIEW) DESCRIPTION/ORDERING INFORMATION The SN65C1167E and SN65C1168E consist of dual drivers and dual receivers with ±15-kV ESD (Human Body Model [HBM]) and ±8-kV ESD (IEC61000-4-2 Air-Gap Discharge and Contact Discharge) for RS-422 bus pins. The devices meet the requirements of TIA/EIA-422-B and ITU recommendation V.11. 1 SN65C1168E . . . RGY PACKAGE (TOP VIEW) 1A 1R 1DE 2R 2A 2B VCC • • 1B 1A 1R RE 2R 2A 2B GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 2D • • • • • SN65C1167E . . . NS OR PW PACKAGE (TOP VIEW) 1B • • Meet or Exceed Standards TIA/EIA-422-B and ITU Recommendation V.11 Operate From Single 5-V Power Supply ESD Protection for RS-422 Bus Pins – ±15-kV Human-Body Model (HBM) – ±8-kV IEC 61000-4-2, Contact Discharge – ±8-kV IEC 61000-4-2, Air-Gap Discharge Low Supply-Current Requirements: 9 mA Max Low Pulse Skew Receiver Input Impedance . . . 17 kΩ (Typ) Receiver Input Sensitivity . . . ±200 mV Receiver Common-Mode Input Voltage Range of –7 V to 7 V Glitch-Free Power-Up/Power-Down Protection Receiver 3-State Outputs Active-Low Enable (SN65C1167E Only) 1B FEATURES • SLLS740A – MARCH 2007 – REVISED APRIL 2007 GND www.ti.com SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION 1D 1Y 1Z 2DE 2Z 2Y Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2007, Texas Instruments Incorporated SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 ORDERING INFORMATION PACKAGE (1) TA ORDERABLE PART NUMBER Tube of 50 SOP – NS Reel of 2000 –40°C to 85°C Tube of 90 TSSOP – PW Reel of 2000 QFN – RGY (1) Reel of 1000 65C1167E SN65C1168ENS 65C1168E SN65C1167ENSR 65C1167E SN65C1168ENSR 65C1168E SN65C1167EPW CB1167E SN65C1168EPW CB1168E SN65C1167EPWR CB1167E SN65C1168EPWR CB1168E SN65C1167ERGYR CB1167 SN65C1168ERGYR CB1168 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. FUNCTION TABLES Each Driver OUTPUTS INPUT D ENABLE DE Y H H H L L H L H X L Z Z Z SN65C1167E, Each Receiver (1) (1) DIFFERENTIAL INPUTS A–B ENABLE RE OUTPUT R VID ≥ 0.2 V L H –0.2 V < VID < 0.2 V L ? VID ≤ –0.2 V L L X H Z Open L H H = High level, L = Low level, ? = Indeterminate, X = Irrelevant, Z = High impedance (off) SN65C1168E, Each Receiver (1) (1) 2 TOP-SIDE MARKING SN65C1167ENS DIFFERENTIAL INPUTS A–B OUTPUT R VID ≥ 0.2 V H –0.2 V < VID < 0.2 V ? VID ≤ –0.2 V L Open H H = High level, L = Low level, ? = Indeterminate Submit Documentation Feedback SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 LOGIC DIAGRAMS (POSITIVE LOGIC) SN65C1167E DE RE SN65C1168E 12 1DE 1D 4 14 1D 15 13 2 1R 3 1 10 2D 9 11 6 2R 5 7 1Y 1Z 1R 2DE 1A 2D 4 14 15 13 2 3 1 12 10 9 11 1B 2Y 2R 6 5 7 2Z 1Y 1Z 1A 1B 2Y 2Z 2A 2B 2A 2B SCHEMATIC OF INPUTS EQUIVALENT OF DRIVER ENABLE INPUT VCC EQUIVALENT OF A OR B INPUT VCC 17 kΩ NOM Input 1.7 kΩ NOM Input 288 kΩ NOM 1.7 kΩ NOM VCC (A) or GND (B) GND GND Submit Documentation Feedback 3 SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 SCHEMATIC OF OUTPUTS TYPICAL OF EACH DRIVER OUTPUT TYPICAL OF EACH RECEIVER OUTPUT VCC VCC Output Output GND GND Absolute Maximum Ratings (1) over recommended operating free-air temperature range (unless otherwise noted) VCC Supply voltage range (2) VI Input voltage range VID Differential input voltage range (3) VO Output voltage range IIK Input clamp current range IOK Output clamp current range IO Output current range ICC Supply current range MIN MAX –0.5 7 Driver, DE, RE –0.5 7 A or B, Receiver –14 14 Receiver –14 14 Driver –0.5 7 Receiver –0.5 VCC + 0.5 Driver, VI < 0 –20 Driver, VO < 0 –20 Receiver ±20 ±150 Driver ±25 Receiver GND current TJ Operating virtual junction temperature V V V V mA mA mA 200 mA –200 mA 150 °C NS package 64 PW package 108 θJA Package thermal impedance (4) (5) TA Operating free-air temperature range –40 85 °C Tstg Storage temperature range –65 150 °C RGY package (1) (2) (3) (4) (5) 4 UNIT °C/W 39 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values except differential input voltage are with respect to the network GND. Differential input voltage is measured at the noninverting terminal, with respect to the inverting terminal. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 Recommended Operating Conditions MIN NOM MAX 4.5 5 UNIT VCC Supply voltage 5.5 V VIC Common-mode input voltage (1) Receiver ±7 V VID Differential input voltage Receiver ±7 V VI Input voltage Except A, B 0 5.5 V VO Output voltage Receiver 0 VCC V VIH High-level input voltage Except A, B 2 VIL Low-level input voltage Except A, B 0.8 Receiver –6 IOH High-level output current IOL Low-level output current TA Operating free-air temperature (1) Driver V –20 Receiver 6 Driver 20 –40 85 V mA mA °C Refer to TIA/EIA-422-B for exact conditions. Submit Documentation Feedback 5 SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 DRIVER SECTION abc Electrical Characteristics over recommended supply voltage and operating free-air temperature ranges (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (1) 2.4 3.5 MAX UNIT –1.5 V VIK Input clamp voltage II = –18 mA VOH High-level output voltage VIH = 2 V, VIL = 0.8 V, IOH = –20 mA VOL Low-level output voltage VIH = 2 V, VIL = 0.8 V, IOL = 20 mA |VOD1| Differential output voltage 1 IO = 0 mA 2 |VOD2| Differential output voltage 2 RL = 100 Ω, See Figure 1 (2) 2 ∆|VOD| Change in magnitude of differential output voltage RL = 100 Ω, See Figure 1 (2) ±0.4 V VOC Common-mode output voltage RL = 100 Ω, See Figure 1 (2) ±3 V ∆|VOC| Change in magnitude of common-mode output voltage RL = 100 Ω, See Figure ±0.4 V IO(OFF) Output current with power off VCC = 0 V IOZ High-impedance-state output current IIH High-level input current VI = VCC or VIH 1 IIL Low-level input current VI = GND or VIL –1 µA IOS Short-circuit output current VO = VCC or GND (3) –150 mA ICC Supply current (total package) No load, Enabled Ci Input capacitance (1) (2) (3) (4) V 0.2 0.4 V 6 V 3.7 1 (2) V VO = 6 V 100 VO = –0.25 V 100 VO = 2.5 V 20 VO = 5 V –20 –30 VI = VCC or GND 4 6 VI = 2.4 or 0.5 V (4) 5 9 6 µA µA µA mA pF All typical values are at VCC = 5 V and TA = 25°C. Refer to TIA/EIA-422-B for exact conditions. Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. This parameter is measured per input, while the other inputs are at VCC or GND. Switching Characteristics over recommended supply voltage and operating free-air temperature ranges (unless otherwise noted) PARAMETER TEST CONDITIONS tPHL Propagation delay time, high- to low-level output tPLH Propagation delay time, low- to high-level output tsk(p) Pulse skew tr Rise time tf Fall time tPZH Output-enable time to high level tPZL Output-enable time to low level tPHZ Output-disable time from high level tPLZ Output-disable time from low level (1) R1 = R2 = 50 Ω, C1 = C2 = C3 = 40 pF, See Figure 2 R3 = 500 Ω, S1 is open, R1 = R2 = 50 Ω, C1 = C2 = C3 = 40 pF, See Figure 3 MIN TYP (1) MAX 8 16 ns UNIT 8 16 ns 1.5 4 ns R3 = 500 Ω, S1 is open, 5 10 ns 5 10 ns R1 = R2 = 50 Ω, C1 = C2 = C3 = 40 pF, See Figure 4 R3 = 500 Ω, S1 is closed, 10 19 ns 10 19 ns R1 = R2 = 50 Ω, C1 = C2 = C3 = 40 pF, See Figure 4 R3 = 500 Ω, S1 is closed, 7 16 ns 7 16 ns abc All typical values are at VCC = 5 V and TA = 25°C. ESD Protection PARAMETER TEST CONDITIONS Driver output 6 TYP UNIT ±15 HBM IEC 61000-4-2, Air-Gap Discharge ±8 IEC 61000-4-2, Contact Discharge ±8 Submit Documentation Feedback kV SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 RECEIVER SECTION abc Electrical Characteristics over recommended ranges of common-mode input voltage, supply voltage, and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VIT+ Positive-going input threshold voltage, differential input VIT– Negative-going input threshold voltage, differential input Vhys Input hysteresis (VIT+ – VIT–) VIK Input clamp voltage, RE VOH High-level output voltage VID = 200 mV, IOH = –6 mA VOL Low-level output voltage VID = –200 mV, IOL = 6 mA IOZ High-impedance state output current II Line input current II Enable input current, RE rI Input resistance VIC = –7 V to 7 V, Other input at 0 V ICC Supply current (total package) No load, Enabled (1) (2) (3) TYP (1) MIN MAX UNIT 0.2 V –0.2 (2) V 60 mV SN65C1167E II = –18 mA –1.5 3.8 SN65C1167E VO = VCC or GND Other input at 0 V V 4.2 V 0.1 0.3 V ±0.5 ±5 µA VI = 10 V 1.5 VI = –10 V –2.5 mA ±1 SN65C1167E VI = VCC or GND 4 VI = VCC or GND VIH = 2.4 V or 0.5 µA 17 V (3) kΩ 4 6 5 9 mA All typical values are at VCC = 5 V and TA = 25°C. The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for common-mode input voltage and threshold voltage levels only. Refer to TIA/EIA-422-B for exact conditions. Switching Characteristics (1) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT tPLH Propagation delay time, low- to high-level output See Figure 5 9 15 27 ns tPHL Propagation delay time, high- to low-level output See Figure 5 9 15 27 ns tTLH Transition time, low- to high-level output 4 9 ns tTHL Transition time, high- to low-level output 4 9 ns tPZH Output-enable time to high level 7 22 ns tPZL Output-enable time to low level 7 22 ns tPHZ Output-disable time from high level 12 22 ns tPLZ Output-disable time from low level 12 22 ns (1) (2) VIC = 0 V, SN65C1167E RL = 1 kΩ, CL= 50 pF See Figure 5 See Figure 6 Measured per input while the other inputs are at VCC or GND All typical values are at VCC = 5 V and TA = 25°C. ESD Protection PARAMETER TEST CONDITIONS Receiver input TYP UNIT ±15 HBM IEC 61000-4-2, Air-Gap Discharge ±8 IEC 61000-4-2, Contact Discharge ±8 Submit Documentation Feedback kV 7 SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 PARAMETER MEASUREMENT INFORMATION RL 2 VOD2 RL 2 VOC Figure 1. Driver Test Circuit, VOD and VOC Input (see Note B) 1.3 V VOH R3 50% 1.3 V Y 1.5 V C1 S1 tsk(p) R2 C3 0V tPHL R1 C2 1.3 V tPLH Y Input 3V 50% 1.3 V VOL tsk(p) VOH Z 50% 1.3 V Z See Note A tPHL TEST CIRCUIT 50% 1.3 V VOL tPLH VOLTAGE WAVEFORMS NOTES: A. C1, C2, and C3 include probe and jig capacitance. B. = tf ≤ 6 ns. r Figure 2. Driver Test Circuit and Voltage Waveforms C2 Input R1 0V R3 VOD 1.5 V C1 S1 R2 C3 3V Input (see Note B) Y Differential Output 90% 90% 10% 10% Z tr See Note A VOLTAGE WAVEFORMS TEST CIRCUIT NOTES: A. C1, C2, and C3 include probe and jig capacitance. B. Figure 3. Driver Test Circuit and Voltage Waveforms 8 tf Submit Documentation Feedback r = tf ≤ 6 ns. SN65C1167E,, SN65C1168E DUAL DIFFERENTIAL DRIVERS AND RECEIVERS WITH ±15-kV ESD PROTECTION www.ti.com SLLS740A – MARCH 2007 – REVISED APRIL 2007 PARAMETER MEASUREMENT INFORMATION (continued) 3V Input DE Y R1 R3 C2 0V or 3V C1 S1 50 Ω 1.5 V Output 0V 1.5 V VOL + 0.3 V 0.8 V VOL tPZH tPHZ Z DE 1.3 V tPZL R2 C3 Pulse Generator 1.3 V tPLZ VOH See Note A VOH - 0.3 V Output 2V 1.5 V See Note B VOLTAGE WAVEFORMS TEST CIRCUIT NOTES: A. C1, C2, and C3 include probe and jig capacitance. B. r = tf ≤ 6 ns. Figure 4. Driver Test Circuit and Voltage Waveforms VCC S1 2.5 V 0V -2.5 V B Input A Input = 0 V (see Note B) tPLH A Input B Input tPHL RL Device Under Test 90% 50% 10% Output CL = 50 pF (see Note A) 90% 50% VOH 10% tTLH TEST CIRCUIT VOL tTHL VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. The pulse generator has the following characteristics: PRR≤ 1 MHz, duty cycle = 50%, tr = tf ≤ 6 ns. Figure 5. Receiver Test Circuit and Voltage Waveforms 3V RE Input (see Note B) VCC S1 1.3 V 1.3 V 0V tPLZ tPZL VCC Output VOL + 0.5 V RE Input VID = -2.5 V or 2.5 V RL Device Under Test tPHZ 50% VOL tPZH VOH CL = 50 pF (see Note A) VOH – 0.5 V Output 50% GND tPZL, tPLZ Measurement: S1 to VCC tPZH, tPHZ Measurement: S1 to GND TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. The pulse generator has the following characteristics: PRR≤ 1 MHz, duty cycle = 50%, tr = tf ≤ 6 ns. Figure 6. Receiver Test Circuit and Voltage Waveforms Submit Documentation Feedback 9 PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN65C1167ENS ACTIVE SO NS 16 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167ENSG4 ACTIVE SO NS 16 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167ENSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167ENSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167EPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167EPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167EPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167EPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1167ERGYR ACTIVE QFN RGY 16 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN65C1167ERGYRG4 ACTIVE QFN RGY 16 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN65C1168ENS ACTIVE SO NS 16 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168ENSG4 ACTIVE SO NS 16 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168ENSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168ENSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168EPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168EPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168EPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168EPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65C1168ERGYR ACTIVE QFN RGY 16 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN65C1168ERGYRG4 ACTIVE QFN RGY 16 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2007 TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 4-Oct-2007 TAPE AND REEL BOX INFORMATION Device Package Pins Site Reel Diameter (mm) Reel Width (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN65C1167ENSR NS 16 SITE 41 330 16 8.2 10.5 2.5 12 16 Q1 SN65C1167EPWR PW 16 SITE 41 330 12 7.0 5.6 1.6 8 12 Q1 SN65C1167ERGYR RGY 16 SITE 41 180 12 3.8 4.3 1.5 8 12 Q1 SN65C1168ENSR NS 16 SITE 41 330 16 8.2 10.5 2.5 12 16 Q1 SN65C1168EPWR PW 16 SITE 41 330 12 7.0 5.6 1.6 8 12 Q1 SN65C1168ERGYR RGY 16 SITE 41 180 12 3.8 4.3 1.5 8 12 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com Device 4-Oct-2007 Package Pins Site Length (mm) Width (mm) Height (mm) SN65C1167ENSR NS 16 SITE 41 346.0 346.0 33.0 SN65C1167EPWR PW 16 SITE 41 346.0 346.0 29.0 SN65C1167ERGYR RGY 16 SITE 41 190.0 212.7 31.75 SN65C1168ENSR NS 16 SITE 41 346.0 346.0 33.0 SN65C1168EPWR PW 16 SITE 41 346.0 346.0 29.0 SN65C1168ERGYR RGY 16 SITE 41 190.0 212.7 31.75 Pack Materials-Page 2 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony Low Power Wireless www.ti.com/lpw Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated